Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Free-Space Optical Communication for CubeSats in Low Lunar Orbit (LLO)

The NASA ARTEMIS Program will include LunaNet, a highly extensible, open architecture, lunar communications and navigation network. A constellation of CubeSats in Low Lunar Orbit (LLO), 100 km, could form an optical communications and navigation network as part of LunaNet, with terminals on the lunar surface, including mobile ones such as with astronauts and rovers. The proposed CubeSat nodes should provide data relay and navigational aid services. The proposed effort herein is to develop a fine pointing capability for laser beam pointing to augment body pointing by CubeSats. Body pointing was used by Aerospace Corporation for the CubeSats in LEO in NASA’s Optical Communications and Sensors Demonstration (OCSD) program [1]. Previously, this fine pointing capability was computer simulated for the OCSD program [2,3]. With fine pointing, the spot size on the Earth was reduced by a factor of eight with a reduction in laser output power by a factor of sixty-four, thereby mitigating the thermal load challenge on the CubeSats. The same reductions in spot size and laser output power can be achieved for CubeSats in LLO. A new method is described for optical data transmissions from satellites, which uses laser arrays for laser beam pointing. It combines a lens system and an array of vertical-cavity, surface-emitting lasers and photodetectors, an VCSEL/Photodetector Array, (both mature technologies), in a novel way. This system is applied to CubeSats in low lunar orbit, (LLO), which use body pointing. Also, It may be able to replace current architectures which use dynamical systems, (i.e., moving parts) to point the laser, and which may also use vibration isolation platforms. The computer simulations used the optics code, OpticStudio, from Zemax, LLC, which has the capabilities to model the laser source and diffraction effects from wave optics. These capabilities make it possible to model laser beam propagation over long space communication distances.

Goorjian, P. M.↗

Scouts: Using Numbers to Explore Mars In Situ

Mars is a planet with a complex geologic history involving fluvial, volcanic, aeolian, atmospheric, and impact processes. Many critical questions about Mars are still heatedly debated within the scientific community and we still have much to discover. The current Mars exploration philosophy involves remote observation of the planet from orbit and intensive in situ study of a few sites on the surface. Orbital data provides a global picture while in situ investigations provide detailed knowledge at a single location. Mars Scouts are proposed to provide access to multiple locations on Mars. They address the emerging program needs of exploring the diversity of the planet globally in ways that cannot be achieved from orbit. The goal of the Scout is to find a way to investigate many locations on the surface of Mars in an affordable and efficient manner. We have only visited three locations on the surface of Mars, which have very similar characteristics. Increased numbers allows more types of locations to be investigated. The hallmarks of Scouts are numbers and access. Thus the capability of a single Scout will be limited. The science return from a single Scout will be significantly less than from a large science lander or an orbiting spacecraft. Scouts rely on their numbers to collectively provide a substantial increase in our knowledge of Mars. Scouts potentially serve two purposes in the Mars exploration architecture. First, Scouts are a science exploration tool. They provide access to places on Mars we currently can't explore because program focus, surface roughness, elevation, or latitude that we know are scientifically interesting. Scouts can react to new discoveries and evolving ideas about Mars. They can be used to test theories which until proven would not warrant the investment of a large lander. Second, Scouts enable better large scale missions by providing ground truth of remote sensing data and allowing us to "know" sites in advance before sending large landers and sample return missions. This increases the probability of success for these expensive missions both from safety and science return stand-points.

Blaney, D. L.↗

A Parametric Assessment of Lunar and Mars Ascent Vehicle Synergy

The National Aeronautics and Space Administration has long had a focus on the human exploration of space, starting with Earth orbit, progressing to the Moon, and looking forward to Mars and other deep space destinations. With current priorities aiming toward a return to the Lunar surface in 2024 as part of an extended exploration campaign that will prepare the way for the first crewed mission to Mars, it is timely to examine possible commonalities between the Lunar and Martian mission architectures, particularly in the vehicle systems. One area of potential similarity lies within the ascent phase of the missions; at a first look, the initial Artemis missions to return to the Moon and a short-duration surface stay option for a Mars mission appear similar in several regards, especially in regards to the selection of the crew size, duration of crewed flight, and general subsystem functionality. This paper will take a closer look at these similarities as they apply to the respective ascent vehicles for each planetary body and how those similarities could enable synergies between the Lunar and Mars ascent vehicles of both missions.

Human Exploration↗

Fluorinated bottlebrush polymers based on poly(trifluoroethyl methacrylate): Synthesis and characterizations

Bottlebrush polymers are densely grafted polymers with long side-chains attached to a linear polymeric backbone. Their unusual structures endow them with a number of unique and potentially useful properties in solution, in thin films, and in bulk. Despite the many studies of bottlebrushes that have been reported, the structure–property relationships for this class of materials are still poorly understood. In this contribution, we report the synthesis and characterization of fluorinated bottlebrush polymers based on poly(2,2,2-trifluoroethyl methacrylate). The synthesis was achieved by atom transfer radical polymerization (ATRP) using an α-bromoisobutyryl bromide functionalized norbornene initiator, followed by ring-opening metathesis polymerization (ROMP) using a third generation Grubbs’ catalyst (G3). Rheological characterization revealed that the bottlebrush polymer backbones remained unentangled as indicated by the lack of a rubbery plateau in the modulus. By tuning the size of the backbone of the bottlebrush polymers, near-spherical and elongated particles representing single brush molecular morphologies were observed in a good solvent as evidenced by TEM imaging, suggesting a semi-flexible nature of their backbones in dilute solutions. Thin films of bottlebrush polymers exhibited noticeably higher static water contact angles as compared to that of the macromonomer reaching the hydrophobic regime, where little differences were observed between each bottlebrush polymer. Further investigation by AFM revealed that the surface of the macromonomer film was relatively smooth; in contrast, the surface of bottlebrush polymers displayed certain degrees of nano-scale roughness (R q = 0.8–2.4 nm). The enhanced hydrophobicity of these bottlebrushes likely results from the preferential enrichment of the fluorine containing end groups at the periphery of the molecules and the film surface due to the side chain crowding effect. Furthermore, our results provide key information towards the design of architecturally tailored fluorinated polymers with desirable properties.

36 MATERIALS SCIENCE↗

Ion Traps and Packaging for Heterogenous Integration - Chimera

Microfabricated surface ion traps and silicon-based photonics are critical technologies for scaling quantum systems. Current ion trap architectures face scalability and integration challenges due to limitations in optical access, fabrication techniques, and material compatibility. State-of-the-art quantum computers and atomic clocks are investigating monolithic integration, which necessitates custom traps for each ion species and has not overcome the integration hurdles presented by merging these technologies. The Chimera (Ion Traps and Packaging for Heterogeneous Integration) project proposes a novel approach utilizing heterogeneous integration (HI) of ion traps and photonic circuits. This separation of components allows for flexibility in ion trap design and reduces fabrication compromises. The Chimera project specifically designed an ion trap to interface vertically with a separately fabricated waveguide chip and demonstrates the first steps to integrating them at the packaging level. The ion trap features a large area of removed silicon, allowing the photonics chip outputs closer to the ion trap, improving alignment and packaging processes. The alignment must be accurate to < 1 µm to ensure that the light from the waveguide can overlap with the trapping region. This fine alignment must also be maintained through an ultra-high vacuum bake, a critical step in preparing an ion trap experiment. By combining separate chips, we demonstrate a new path for scaling trapped ion technology that is less reliant on monolithic integration. We successfully fabricated a trap with a large area of oxide removed, resulting in a region thinned to about 40 µm, a key milestone toward successful integration.

42 ENGINEERING↗

Challenges in mobility and robotics for in-situ science

In-situ science on planetary surfaces such as Mars, Venus, Mercury and Titan pose extreme challenges for mobile robots. Future missions will involve surface, subsurface, and atmospheric mobility which focuses the need for technology development in sensing, autonomy, and mobile robot architectures for solar system exploration.

challenges mobility robotics in-situ science↗

In-situ Resource Utilization (ISRU) and Lunar Surface Systems

This viewgraph presentation reviews the benefits of In-Situ Resource Utilization (ISRU) on the surface of the moon. Included in this review is the commercialization of Lunar ISRU. ISRU will strongly influence architecture and critical technologies. ISRU is a critical capability and key implementation of the Vision for Space Exploration (VSE). ISRU will strongly effects lunar outpost logistics, design and crew safety. ISRU will strongly effect outpost critical technologies. ISRU mass investment is minimal compared to immediate and long-term architecture delivery mass and reuse capabilities provided. Therefore, investment in ISRU constitutes a commitment to the mid and long term future of human exploration.

Sanders, Jerry↗

Mars Design Reference Architecture 5.0 Study: Executive Summary

The NASA Mars Design Reference Architecture 5.0 Study seeks to update its long term goals and objective for human exploration missions; flight and surface systems for human missions and supporting infrastructure; operational concept for human and robotic exploration of Mars; key challenges including risk and cost drivers; and, its development schedule options. It additionally seeks to assess strategic linkages between lunar and Mars strategies and develop and understanding of methods for reducing the cost/risk of human Mars missions through investment in research, technology development, and synergy with other exploration plans. Recommendations are made regarding conjunction class (long-stay) missions which are seen as providing the best balance of cost, risk, and performance. Additionally, this study reviews entry, descent, and landing challenges; in-space transportation systems; launch vehicle and Orion assessments; risk and risk mitigation; key driving requirements and challenges; and, lunar linkages.

Drake, Bret G.↗

Rocket Cratering in Simulated Lunar and Martian Environments

With NASA's planned return to the moon and possibly with lunar outposts being formed, repeated landings at the same site will be necessary. Understanding rocket plume interaction with lunar and Martian surfaces is of paramount importance in order to safely land and protect hardware surrounding the landing site. This work will report on results of three small experiments intended to explore plume impingement onto lunar and Martian surfaces: Handheld Observation of Scour Holes (HOOSH), Handheld Angle of Repose Measurements of Lunar Simulants (HARMLuS), and Mars Architecture Team study (MATS). The first two experiments were performed during two sorties of reduced gravity flights. HOOSH was designed to investigate crater formation as a function of gravitational level (lunar and Martian gravity). HARMLuS was designed to measure the Angle of Failure (related to the angle of repose) at lunar and Martian gravity. Both experiments have complex findings indicative of the hysteretic behavior of granular materials, especially resulting from reduced gravity. The MATS experiment was designed to investigate the effects of regolith compaction on the granular mechanics of crater formation . In general, the granular mechanics is a much stronger function of compaction than gravitation acceleration. Crater formation is greatly enhanced at reduced gravity (resulting in much larger craters). The angle of failure of the lunar simulants increases with decreasing gravitational acceleration, and occasionally becomes infinite for some compactions at lunar gravity. The angle of failure also increases with increasing compaction. While compaction does play a role in the time development of crater formation, the asymptotic behavior is largely unaffected.

Immer, Christopher↗

Finite Element Model Characterization Of Nano-Composite Thermal And Environmental Barrier Coatings

Thermal and environmental barrier coatings have been applied for protecting Si based ceramic matrix composite components from high temperature environment in advanced gas turbine engines. It has been found that the delamination and lifetime of T/EBC systems generally depend on the initiation and propagation of surface cracks induced by the axial mechanical load in addition to severe thermal loads. In order to prevent T/EBC systems from surface cracking and subsequent delamination due to mechanical and thermal stresses, T/EBC systems reinforced with nano-composite architectures have showed promise to improve mechanical properties and provide a potential crack shielding mechanism such as crack bridging. In this study, a finite element model (FEM) was established to understand the potential beneficial effects of nano-composites systems such as SiC nanotube-reinforced oxide T/EBC systems.

Yamada, Yoshiki↗

Optical Breath Gas Sensor for Extravehicular Activity Application

The function of the infrared gas transducer used during extravehicular activity (EVA) in the current space suit is to measure and report the concentration of carbon dioxide (CO2) in the ventilation loop. The next generation Portable Life Support System (PLSS) requires next generation CO2 sensing technology with performance beyond that presently in use on the Shuttle/International Space Station extravehicular mobility unit (EMU). Accommodation within space suits demands that optical sensors meet stringent size, weight, and power requirements. A laser diode (LD) spectrometer based on wavelength modulation spectroscopy (WMS) is being developed for this purpose by Vista Photonics, Inc. Two prototype devices were delivered to NASA Johnson Space Center (JSC) in September 2011. The sensors incorporate a laser diode based CO2 channel that also includes an incidental water vapor (humidity) measurement and a separate oxygen (O2) channel using a vertical cavity surface emitting laser (VCSEL). Both prototypes are controlled digitally with a field-programmable gate array (FPGA)/microcontroller architecture. Based on the results of the initial instrument development, further prototype development and testing of instruments leveraging the lessons learned were desired. The present development extends and upgrades the earlier hardware to the Advanced PLSS 2.0 test article being constructed and tested at JSC. Various improvements to the electronics and gas sampling are being advanced by this project. The combination of low power electronics with the performance of a long wavelength laser spectrometer enables multi-gas sensors with significantly increased performance over that presently offered in the EMU. .

Wood, William R.↗

Characterization of Moving Dust Particles

A large depth-of-field Particle Image Velocimeter (PIV) has been developed at NASA GSFC to characterize dynamic dust environments on planetary surfaces. This instrument detects and senses lofted dust particles. We have been developing an autonomous image analysis algorithm architecture for the PIV instrument to greatly reduce the amount of data that it has to store and downlink. The algorithm analyzes PIV images and reduces the image information down to only the particle measurement data we are interested in receiving on the ground - typically reducing the amount of data to be handled by more than two orders of magnitude. We give a general description of PIV algorithms and describe only the algorithm for estimating the velocity of the traveling particles.

Bos, Brent J.↗

Human Mars Entry, Descent, and Landing Architecture Study: Phase 3 Summary

Over the past four years, NASA has directed the Entry, Descent and Landing Architecture Study (EDLAS) to evaluate candidate technologies to deliver human-scale vehicles (carrying 20t payloads) to the surface of Mars. The study focused on two vehicles in Phase 3 (during 2018 and 2019), one low and one mid lift-to-drag (L/D) vehicle. This paper summarizes updates to the structural and aeroshell outer mold line design for the mid-L/D Mars entry lander vehicle that occurred during EDLAS Phase 3. The design efforts used parametric optimization to arrive at a solution for total vehicle primary and secondary structure mass, and vehicle center-of-gravity location. Additionally, the end of Phase 2 provided an updated surface payload manifest that required three 22 t landers. This paper also summarizes the results of the packaging feasibility study of the updated payload configurations for those three reference missions. The study verified an arrangement of the payload elements within the mid-L/D vehicle that satisfied the center of gravity location limitations for flight.

Calderon, Damien↗

In-Situ Navigation and Timing Services for the Human Mars Landing Site Part 1: System Concept

In [1] and [2], we introduce a new geometric trilateration method that simultaneously performs absolute positioning and relative positioning. The relative position is derived from a “differencing” function of two raw-range measurements between a known reference point and of the target from a navigation satellite, thereby eliminating most of the common errors like atmospheric delays, ephemeris errors, and instrument delays in real-time. In the Mars environment this “error-cancellation” function greatly reduces the need to perform extensive orbit determination (OD) of the navigation satellites like the Earth’s GPS, and only requires occasional tracks from the Earth’s large-aperture deep space antennas to perform OD’s. Leveraging on this scheme, we propose a low-cost, low-maintenance regional navigation satellite system architecture that provides in-situ navigation and timing services for robotic and human missions in the vicinity of a Mars landing site. This architecture is built upon the proposed Mars relay network infrastructure, and a number of notional Mars orbiting and surface missions in the human exploration era of Mars. We assume two areostationary Mars relay orbiters that have continuous line-of-sight visibility with the Mars landing site, a Deep Space Habitat (DSH) in an inclined 48-hour circular orbit, and a surface communication lander that could serve as the reference point. These orbiting and surface infrastructure elements broadcast GPS-like ranging signals and other ephemeris information to the mission users. With one or more additional orbiters in areosynchronous orbits that trace around a figure-8 path, a regional navigation satellite system can be realized that provides in-situ course absolute localization and precision relative localization and timing services to the users in the vicinity of a Mars landing site. This paper describes the system concept of the proposed Mars regional navigation satellite system.

Lee, Charles↗

NASA Kennedy Space Center Swamp Works: Innovation Methods for Advanced Research & Technology Development

Kennedy Space Center’s (KSC) Swamp Works, provides government and commercial space ventures with the technologies required for working and living on the surfaces of the Moon or other planets and bodies in our solar system. The Swamp Works team establishes agile, innovative and cost effective exploration mission solutions through leveraging of partnerships across NASA, industry and academia. Concepts start small and build up efficiently, with lean development processes and a hands on approach. Testing is performed in early stages to drive design improvements and progressively increase Technology Readiness Levels (TRL). Swamp Works provides concepts, architecture studies and trades, designs, data, technology development, technology demonstration hardware, flight hardware, testing, flight support and knowledge in support of the development of surface systems. This paper will summarize the state of the art in innovation methods, and it will compare the various other methods to how innovation is accomplished at the NASA KSC Swamp Works. Since 2013, Swamp Works has developed a wide variety of technologies, and has demonstrated viable methods for innovation while also collaborating with other government agencies, industry and academia to support space exploration. These methods focus on agile design, test, build iterations where each cycle of prototyping results in improved knowledge and designs. Failures are tole rated in the early stages of these iterations, since the overall development cycle is shorter more efficient and cost effective by retiring risk early in the cycle. Momentum is maintained and the development teams remain highly motivated by the high level of team work, technical excellence, engagement and creative freedom.

Robotic Mining↗

Selection, Production, and Properties of Regolith Polymer Composites for Lunar Construction

NASA’s Artemis Program seeks to establish a long-term presence on the moon to enable scientific discoveries and utilization of lunar resources through public-private partnerships. Over the next decades, a lunar spaceport enabling regular transportation from and to Earth will need to be established to provide the services and facilities that are necessary to achieve this goal. Robotic construction technologies using in-situ materials must be developed to build up enabling infrastructure such as launch/landing pads, blast protection, power/communications towers, improved trafficability pathways and radiation protection shelters. Kennedy Space Center’s Granular Mechanics and Regolith Operations laboratory at Swamp Works has partnered with AI SpaceFactory to develop the architectural and structural design of an unpressurized shelter. The shelter, called Lina, is designed to protect astronauts and surface assets from radiation, meteoroid impact, moon quakes and thermal gradients. Lina’s structural design criteria and the resulting structure design are detailed in separate papers. A Fused Filament Fabrication (FFF) construction process using regolith polymer composites has been developed. This paper presents the material formulations and selection rationale for each of the composite components. Formulations include 70:30, 80:20, and 85:15 wt.% mixture ratios of lunar mare simulant Black Point-1 (BP-1): Polylactic Acid (PLA), 80:20 Lunar Highlands Simulant (LHS-1): PLA and an 80:20 BP-1:PLA formulation with a processing aid/compatibilizer additive. Test samples were printed in simulated lunar dirty thermal vacuum conditions (~-180 °C, ~10 -3 torr). The test environment evolved throughout the duration of the print process. A series of tests were performed to characterize the mixture ratios achieved for each formulation, the off-gassing products during vacuum printing, the strength properties, and porosity of printed products. The LHS-1: PLA formulation yielded an advantageous combination of properties and was used in a final test that additively constructed a sub-scaled Lina on regolith simulant in dirty vacuum conditions.

lunar infrastructure↗

Sensing trace levels of molecular species in solution via zinc oxide nanoprobe Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) has potential for unique clinical, environmental, and military applications, among many others, but it is limited by a rapid decrease in signal with distance from the sensing surface. For this reason, much study of SERS-based biosensing involves chemical or physical adsorption of analytes to an active surface. Adsorption, however, limits the types of analytes that can be detected and detection sensitivity. The three-dimensional closely packed architecture of zinc oxide (ZnO) nanowires decorated with silver nanoparticles increases SERS intensity, allowing for adsorption-free biosensing. This approach greatly expands the potential applications of Raman spectroscopy as a biosensing technique. This article demonstrates a significant SERS enhancement from silver nanoparticle-decorated ZnO nanoprobes to the Raman spectra of crystal violet, melamine, and adenine solutions. These enhancements were quantified by comparing the intensity of Raman peaks from each of the three solutions through ZnO nanowires decorated with silver nanoparticles with that through bare ZnO nanowires. Estimated enhancement of the Raman signal accounted for the volume difference between solution affected by SERS and solution sensed by the Raman system. More importantly, the detected SERS signal is from molecules in solution and unadsorbed to the sensing surfaces. This lack of adsorption was confirmed by tracking the SERS enhancement of a crystal violet Raman peak over time. This greatly enhances the value and flexibility of Raman spectroscopy as a detection technique for a wide variety of applications.

42 ENGINEERING↗