Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface slopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Characteristics of Heavy Summer Rainfall in Southwestern Taiwan in Relation to Orographic Effects

On the windward side of southwestern Taiwan, about a quarter to a half of all rainfall during mid-July through August from 1994 to 2000 came from convective systems embedded in the southwesterly monsoon flow. k this study, the causes of two heavy rainfall events (daily rainfall exceeding 100 mm day over at least three rainfall stations) observed over the slopes and/or lowlands of southwestern Taiwan were examined. Data from European Center for Medium-Range Weather Forecasts /Tropical Ocean- Global Atmosphere (EC/TOGA) analyses, the rainfall stations of the Automatic Rainfall and Meteorological Telemetry System (ARMTS) and the conventional surface stations over Taiwan, and the simulation results from a regional-scale numerical model were used to accomplish the objectives. In one event (393 mm day on 9 August 1999), heavy rainfall was observed over the windward slopes of southern Taiwan in a potentially unstable environment with very humid air around 850 hPa. The extreme accumulation was simulated and attributed to orographic lifting effects. No preexisting convection drifted in from the Taiwan Strait into western Taiwan.

Chen, Ching-Sen↗

The Spectral Characteristics of Lunar Agglutinates: Visible-Near-Infrared Spectroscopy of Apollo Soil Separates

The lunar surface evolves over time due to space weathering, and the visible–near-infrared spectra of more mature (i.e., heavily weathered) soils are lower in reflectance and steeper in spectral slope (i.e., darker and redder) than their immature counterparts. These spectral changes have traditionally been attributed to the space-weathered rims of soil grains (and particularly nanophase iron therein). However, understudied thus far is the spectral role of agglutinates—the agglomerates of mineral and lithic fragments, nanophase iron, and glass that are formed by micrometeoroid impacts and are ubiquitous in mature lunar soils. We separated agglutinates and non-agglutinates from six lunar soils of varying maturity and composition, primarily from the 125–250 μm size fraction, and measured their visible–near-infrared reflectance spectra. For each soil, the agglutinate spectra are darker, redder, and have weaker absorption bands than the corresponding non-agglutinate and unsorted soil spectra. Moreover, greater soil maturity corresponds to darker agglutinate spectra with weaker absorption bands. These findings suggest that agglutinates (rather than solely the space-weathered rims) play an important role in both the darkening and reddening of mature soils—at least for the size fractions examined here. Comparisons with analog soils suggest that high nanophase iron abundance in agglutinates is likely responsible for their low reflectance and spectrally red slope. Additional studies of agglutinates are needed both to more comprehensively characterize their spectral properties (across size fractions and in mixing with non-agglutinates) and to assess the relative roles of agglutinates and rims in weathering-associated spectral changes. Plain Language Summary - In scientific study of the Moon, one key focus is surface processes: how do physical and chemical properties of the Moon’s surface change over time due to weathering (e.g., bombardment by micrometeoroids and by particles from the Sun)? Such investigations provide valuable insights into the Moon’s history (such as the ages of impact craters) that are often deduced from measurements of reflected light; as a soil is weathered it reflects light differently, which manifests visually as a progressive darkening of the soil. This phenomenon had primarily been attributed to weathering-associated development of rims on individual soil grains, but in this work we explored an alternative cause: soil particles known as agglutinates (misshapen, vesicular agglomerates of mineral fragments, iron, and glass that form due to weathering processes). We isolated agglutinates of six soil samples from the Moon and measured how they reflect light. We find that they reflect light in patterns reminiscent of how the Moon’s surface does when weathered. These findings suggest that agglutinates play a more important role than previously thought in determining the light-reflecting properties of the Moon’s surface, thus warranting greater and more nuanced consideration in future studies of how the Moon’s surface changes over time.

spectroscopy↗

Altering Linear Scaling Relationships on Metal Catalysts via Ligand–Adsorbate Hydrogen Bonding

Linear scaling relationships for adsorption energies of related molecules provide a simple tool for the prediction of catalytic properties and also reveal inherent constraints in heterogeneous catalyst design. In an effort to predict materials that preferentially stabilize intermediates capable of forming hydrogen bonds (H-bonds) and thus reduce these constraints, scaling relations for thiolate-coated fcc (111) surfaces were developed. Here, we demonstrate how ligand–adsorbate H-bonds lead to the stabilization of certain adsorbates and how this affects the linear scaling of adsorption energies for similarly bound intermediates. For H-bonds that occur remote from the surface, ligand–adsorbate H-bond strength is independent of metal composition and instead depends only on the acidities of the H-bond-forming functional groups. As the distance of H-bond-accepting groups from the surface decreases and interactions with the metal strengthen, the effect of surface composition on H-bond strength increases while additional factors, such as conformational changes and steric hinderance, can offset the stabilizing effect of the ligands. In this work, these competing factors may influence both the slope and y-intercept of adsorption strength scaling. These findings aid the rational design of enhanced catalytic materials by enabling the screening of ligand- or spectator-modified materials that do not conform to the linear scaling relations of bare metal surfaces.

36 MATERIALS SCIENCE↗

Ganymede and Callisto - Surface textural dichotomies and photometric analysis

Complete solar phase curves of the Ganymede and Callisto leading and trailing hemispheres, which have been obtained by reducing Voyager imaging observations and combining them with ground-based telescopic data, are presently fit to scattering models in order to derive hemispherical values of the single scattering albedo, the single particle phase function (SPPF), the compaction state (CS) of the optically active portion of the regolith, and the mean slope angle of macroscopic features. While Callisto's leading side is composed of particles that are more strongly backscattering than the trailing side, no hemispheric differences are found in the CS, surface roughness, or SPPF.

Buratti, Bonnie J.↗

Intrinsic frequency spectra of short gravity-capillary waves obtained from temporal measurements of wave height on a lake

Intrinsic frequency spectra of water waves in the range of 6-17 Hz were obtained as a function of both wind speed and wind stress from point measurements of wave height. In a lake with a limited fetch, there are two types of surface motions causing Doppler shift in the frequencies of short waves: orbital velocity of long waves and surface wind drift. The former was estimated from long-wave amplitude by using a linear wave theory. The error in this estimate is of the order of the long-wave slope, and for this work it is typically 10 percent. The latter was approximated by the friction velocity. The friction velocity could be either taken as 3 percent of the mean wind speed measured at a height of 10 m or obtained from direct measurements of the wind stress. The surface drift velocities obtained by these two approaches were found to be in close agreement. Doppler frequency shift can be corrected in either the frequency or the equivalent spatial domain. The two techniques were found to produce comparable results. Experimental results showed that the spectral energy of short waves rapidly increased in response to increasing winds and jumped up by an order of magnitude when wave breaking occurred.

Atakturk, S. S.↗

The use of remotely sensed surface temperature and a spectral vegetation index for evaluating heat fluxes over the Konza Prairie

The relationship between surface temperature T(s) and the normalized difference vegetation index (NDVI) is examined to determine whether it can be used to characterize latent heat fluxes (LEs). The regression of T(s) on NDVI is studied in the context of surface heat fluxes over the prairie with a limited data set for four flux-measurement sites. The 17 flux-measurement stations at the sites provided data that are consistently significant at the 99-percent confidence level for the regression of T(s) on NDVI. Variations in the regression slopes are found to correlate with variations in the ground heat flux but not with LE. Important components of the regression of T(s) on NDVI include fractional vegetation cover and surface-soil moisture conditions. The relationship is important for determining the relative contributions of the soil and vegetation components of an area's total evaporative flux.

Hope, A. S.↗

Interaction of a strong blast wave with a free surface

When a point source explosion is initiated at the ocean surface, the shock propagated into the water is reflected at the surface as a centered expansion wave. The solution in the neighborhood of the interaction point is obtained by writing the equations of motion in the appropriate similarity variables and then changing the independent variables to polar coordinates based at the interaction point. From the zero-order solution of the resulting equations the slopes of boundaries at the interaction point are obtained. A first-order perturbation of this solution provides more accurate representation of the flow variables and the curvature of the shock surface near the interaction point.

Falade, A.↗

Disorder-dependent slopes of the upper critical field in nodal and nodeless superconductors

In this work we study the slopes of the upper critical field S = ∂H c2 /∂T at the superconducting transition temperature T c in anisotropic superconductors with transport (nonmagnetic) scattering employing the Ginzburg-Landau theory, developed for this case by Pokrovsky and Pokrovsky [Phys. Rev. B 54, 13275 (1996)]. We find unexpected behavior of the slopes for a d -wave superconductor and, in a more general case, of materials with line nodes in the order parameter. Specifically, the presence of line nodes causes S to decrease with increasing nonmagnetic scattering parameter P = ℏ/2πT c0 τ (T c0 is for the clean limit, τ is the scattering time), unlike the nodeless case where the slope increases. In a pure d -wave case, the slope changes from decreasing to increasing when the scattering parameter approaches P ≈ 0.91 P crit , where P crit ≈ 0.28, at which T c → 0, which implies the existence of a “gapless” state in d -wave superconductors with transport scattering in the interval, 0.91 P crit < P < P crit . Furthermore, we consider the mixed (s + d)-wave order parameter with four nodes on a cylindrical Fermi surface when the d part is dominant, or no nodes at all when the s-wave phase dominates. We find that the presence of nodes causes the slope S(P) to decrease initially with increasing P, whereas in the nodeless state, S(P) monotonically increases. Therefore, relatively straightforward measurements of the disorder dependence of the slope of H c2 at T c can help distinguish between nodal and nodeless order parameters, which is particularly useful for quickly assessing newly discovered superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alaskan North Slope Oil & Gas Transportation Support

North Slope oil and gas resources are a critical part of US energy supplies and their development is facing a period of new growth to meet increasing national energy needs. While this growth is taking place in areas active in development for more than 20 years, there are many increasing environmental challenges facing industry and management agencies. A majority of all exploration and development activities, pipeline maintenance and other field support activities take place in the middle of winter, when the fragile tundra surface is more stable. The window for the critical oil and gas winter operational season has been steadily decreasing over the last 25 years. The number of companies working on the North Slope is increasing. Many of these companies are smaller and working with fewer resources than the current major companies. The winter operations season starts with the tundra-travel opening, which requires 15 cm of snow on the land surface in the coastal management areas and 23 cm in the foothills management areas. All state managed areas require -5°C soil temperatures at a soil depth of 30 cm. Currently there are no methods to forecast this opening date, so field mobilization efforts are dependent on agency personnel visiting field sites to measure snow and soil temperature conditions. Weeks can be easily lost in the winter operating season due to delays in field verification of tundra conditions and the resulting mobilization. After the season is open, a significant percentage of exploration, construction, and maintenance do not proceed until ice roads and pads can be built. This effort is dependent on access to lake ice and under-ice water. Ice chipping is a common ice-road construction technique used to build faster and stronger ice roads. Seasonal variability in water availability and permitting approaches are a constant constraint to industry. At the end of the winter season, projects reliant on ice-road networks are often faced with ending operations early or risk being caught on ice roads with flooded stream crossings, or unusable sections of ice road due to local melt. These challenges result in higher oil and gas field exploration and operational costs. Much of the scientific understanding to address transportation issues for oil and gas development on the North Slope exists, but has not been placed into a set of tools and data sets useful for industry and management agencies. Optimizing North Slope transportation networks during winter operation seasons is critical in managing increasing resource development and will provide a framework for environmentally-responsive development. Understanding the physical environment (such as snow, water, ice, soils) is necessary to ensure protection of fisheries and other natural resources on the sensitive tundra landscape. Solutions also have to do more than just describe current conditions, they need the ability to forecast short-term conditions. This will allow management agencies to respond to future variability in snow cover, soil temperature, and water availability more effectively. In turn, industry will then have more time to plan the significant mobilization taking place every winter season.

02 PETROLEUM↗

Changes in Precipitation and Air Temperature Contribute Comparably to Permafrost Degradation in a Warmer Climate: Modeling Archive

The dataset contains "ecosys" model outputs reported in Mekonnen et al. (2021) to examine the importance of heat transfer from precipitation on permafrost degradation. The study highlighted the importance of mechanistically representing this process in earth system models (ESMs) and demonstrated that precipitation is as important an environmental control on permafrost degradation as surface air temperature. Included are (1) the modeled spatially averaged annual active layer depth (ALD) and daily maximum soil temperature across the North Slope of Alaska from 1980 to 2100, and (2) 25 km resolution modeled ALD for averaged for two time intervals, 2006 - 2010 and 2096 - 2100. The results are provided for two "ecosys" simulations: S1 with precipitation heat transfer and S2 without precipitation heat transfer across the North Slope of Alaska. These data are available in a NetCDF and csv data formats. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Solar Infrared Radiation Station (SIRS), Sky Radiation (SKYRAD), Ground Radiation (GNDRAD), and Broadband Radiometer Station (BRS) Instrument Handbook

The solar infrared radiation station (SIRS), ground radiometers on stand for upwelling radiation (GNDRAD), and sky radiometers on stand for downwelling radiation (SKYRAD) provide continuous measurements of broadband shortwave (solar) and longwave (atmospheric or infrared) irradiances for downwelling and upwelling components. The following six irradiance measurements are collected from a network of stations to help determine the total radiative flux exchange at each of the primary U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) field research sites—(Southern Great Plains [SGP], North Slope of Alaska [NSA)]and Eastern North Atlantic [ENA])—as well as the ARM mobile facilities (AMF): Direct normal shortwave (solar beam), Diffuse horizontal shortwave (sky), Global horizontal shortwave (total hemispheric), Upwelling shortwave (reflected), Downwelling longwave (atmospheric infrared), Upwelling longwave (surface infrared).

54 ENVIRONMENTAL SCIENCES↗

Topographic Signatures in Aquarius Radiometer/Scatterometer Response: Initial Results

The effect of topography on remote sensing at L-band is examined using the co-located Aquarius radiometer and scatterometer observations over land. A correlation with slope standard deviation is demonstrated for both the radiometer and scatterometer at topographic scales. Although the goal of Aquarius is remote sensing of sea surface salinity, the radiometer and scatterometer are on continuously and collect data for remote sensing research over land. Research is reported here using the data over land to determine if topography could have impact on the passive remote sensing at L-band. In this study, we report observations from two study regions: North Africa between 15 deg and 30 deg Northern latitudes and Australia less the Tasmania Island. Common to these two regions are the semi-arid climate and low population density; both favorable conditions to isolate the effect of topography from other sources of scatter and emission such as vegetation and urban areas. Over these study regions, topographic scale slopes within each Aquarius pixel are computed and their standard deviations are compared with Aquarius scatterometer and radiometer observations over a 36 day period between days 275 and 311 of 2011.

Utku, C.↗

Self-Supported Hydrous Iridium–Nickel Oxide Two-Dimensional Nanoframes for High Activity Oxygen Evolution Electrocatalysts

Oxygen evolution reaction (OER) electrocatalysts with high activity, high stability, and low costs are needed for proton-exchange membrane (PEM) electrolyzers. Based on the high cost and limited supply of iridium, approaches that result in iridium-based OER catalysts with increased catalytic activity are of significant interest. Here, we report a carbon-free, self-supported hydrous iridium-nickel oxide two-dimensional nanoframe structure synthesized by thermal treatment of iridium-decorated nickel oxide nanosheets under reducing conditions and subsequent chemical leaching in acid. The catalyst nanoarchitecture contains an interconnected network of metallic iridium-nickel alloy domains with hydrous iridium oxide and nickel oxide located in the surface region. The electrochemical oxidation step maintains the three-dimensional nanoarchitecture and results in a thin (~5 A) oxide/hydroxide surface layer. The temperature used for thermal reduction was found to strongly affect the catalyst surface structure and OER activity. Utilizing a lower thermal reduction temperature of 200 degrees C was determined to provide a higher relative surface concentration of hydroxides and nickel oxide and result in higher OER activities compared with materials treated at 300 degrees C. The 200 degrees C-treated hydrous iridium-nickel oxide electrocatalyst showed 15 times higher initial OER mass activity than commercial IrO 2 , and the activity remained 10 times higher than IrO 2 after accelerated durability testing. Density functional theory (DFT) calculations and analysis of the experimental Tafel slopes support that the second electron transfer step is the rate-limiting step for the reaction. The DFT calculations demonstrate that Ni substitution on the IrO 2 surface lowers the activation energy for adsorbed intermediates of the second electron transfer step of the OER reaction. This work establishes that noble metal-decorated metal oxide nanosheets can be transformed into high surface area, carbon-free electrocatalyst nanostructures with high catalytic activities and molecular accessibility and reveals the importance of using controlled thermal reduction temperatures to alter the surface structure and OER activity.

36 MATERIALS SCIENCE↗

Demonstration of a 20‐W membrane‐external‐cavity surface‐emitting laser for sodium guide star applications

Abstract We present a record 20‐W continuous‐wave output power membrane‐external‐cavity surface‐emitting laser (MECSEL) double‐bonded to silicon carbide (SiC) heat spreaders emitting around 1178 nm. We achieved a maximum slope efficiency of 27.7% and an optical‐to‐optical efficiency of 26.7%. By utilising an intracavity birefringent filtre, the wavelength was tuned over 75 nm and maximum output power of 12.7 W was recorded at 1178 nm. This study shows the potential of MECSELs to achieve high‐performance and cost‐effective optically pumped semiconductor disk lasers targeting applications in sodium guide stars.

Priante, D.↗

Supersonic aerodynamic characteristics of a tail-control cruciform maneuverable missile with and without wings

The aerodynamic characteristics for a winged and a wingless cruciform missile are examined. The body was an ogive-cylinder with a 3.5 caliber forebody; an overall length-to-diameter ratio of 11.667; and has cruciform tails that were trapexoidal in planform. Tests were made both with and without 72.9 deg cruciform delta wings. The investigation was made for Mach numbers from 1.50 to 4.63, roll attitudes of 0 and 45 deg, angles of attack from -40 to 22 deg, and tail control deflections from 10 to -40 deg. The purpose is to determine the influence of the aerodynamic behavior on the design choice for maneuverable missiles intended primarily for air-to-air or surface-to-surface missions. The results indicate that the winged missile with its more linear aerodynamic characteristics and higher lift-curve slope, should provide the highest maneuverability over a large operational range.

Spearman, M. L.↗

Microwave radiometer measurement of water vapor path delay: Data reduction techniques

Data reduction techniques are developed to compensate for water vapor path delay, a limiting error source in geodetic measurements made with very long baseline interferometry and in radio ranging to spacecraft. It is shown that water vapor path delay is proportional to a linear combination of saturation-corrected sky brightness temperatures, measured on and off the water vapor line. The effects of emission from liquid water droplets in clouds as well as most of the oxygen emission are removed by the off-line channel. Sky brightness temperatures are saturation-corrected or 'linearized' using estimates of effective sky temperatures made from surface temperature. Tipping curves are used to remove instrumental error. Coefficients are found by two methods: from a regression analysis of measured brightness temperatures versus radiosonde measured delay, and from a regression analysis of theoretical brightness temperatures versus radiosonde measured delay. In each case the coefficients are adjusted for differing climatic conditions by measurements of surface temperature, pressure, and relative humidity. Regression solutions are constrained to remove liquid water contributions and to give the correct slope for radiometer versus radiosonde path delay.

Claflin, E. S.↗

Hypsometric studies of Mars.

Altitude data derived from the 12.6 cm radar measurements obtained at JPL's Goldstone Facility were used to explore the utility of this type of regional analysis and to develop criteria for the interpretation of hypsometric data for planets where no visual images are available. Examination of the radar-derived hypsogram for Mars shows that the unimodal distribution of elevations contains several second order peaks and is skewed toward a modal elevation of about 3.5 km above the 6.1 mb datum. Individual topographic features can be recognized from this hypsogram, but such interpretations are based on the known surface morphology that has been determined from spacecraft images. It is not yet known how, for example, cratered terrain, regional slopes or other morphological features could be identified using the hypsogram if no images were available for ground-truth. The role that large impact craters play in influencing the shape of a hypsogram is being studied.

Blake, P. L.↗

Some negative results in N-sided patches

To ease surface definition in situations of complex topology, patches with other than four sides and with guaranted continuity of at least slope with adjacent patches are needed. There are known techniques in the literature for three- and five-sided patches of reasonably economy, and known transfinite methods for many sides. Some of the conditions that a six-sided patch must satisfy and how certain simpler approaches are not effective are shown.

Sabin, M.↗