Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Flower-like nanostructure MNb{sub 2}O{sub 6} (M = Mn, Zn) with high surface area: Hydrothermal synthesis and enhanced photocatalytic performance

Graphical abstract: - Highlights: • MNb{sub 2}O{sub 6} was prepared by a mild two-step hydrothermal method. • Their flower-like nanostructure morphology was studied by SEM and TEM. • High BET surface areas for MnNb{sub 2}O{sub 6} (∼50 m{sup 2}/g) and ZnNb{sub 2}O{sub 6} (∼100 m{sup 2}/g). • Band gap energies were estimated by UV–vis diffuse reflectance spectra. • Photocatalytic activities were evaluated under UV-light irradiation. - Abstract: Nano-scaled MNb{sub 2}O{sub 6} (M = Mn, Zn) was successfully synthesized via a two-step hydrothermal method. It is important to control the exact pH of the reaction solution in order to obtain pure products. The as-prepared samples both crystallize in the columbite structure. Interestingly, the products possess a flower-like morphology in a pseudo-six-fold symmetry, which is in fact arrayed by two-dimensional nanosheets. Their surface areas (51 m{sup 2}/g for MnNb{sub 2}O{sub 6} and 103 m{sup 2}/g for ZnNb{sub 2}O{sub 6}) are about 25–50 times of those prepared by solid state reaction. UV–vis diffuse reflectance spectra show the nano-scaled sample has a stronger absorption and a narrower band gap than its bulk form. The estimated band gap energies are 2.70 eV (MnNb{sub 2}O{sub 6}) and 3.77 eV (ZnNb{sub 2}O{sub 6}), respectively. The nano-scaled ZnNb{sub 2}O{sub 6} exhibits a double enhancement of photocatalytic activity in the decolorization of methylene blue than bulk ZnNb{sub 2}O{sub 6}.

36 MATERIALS SCIENCE↗

Direct Visualization of Surface Spin-Flip Transition in MnBi 4 Te 7

Here, we report direct visualization of spin-flip transition of the surface layer in antiferromagnet MnBi 4 Te 7 , a natural superlattice of alternating MnBi 2 Te 4 and Bi 2 Te 3 layers, using cryogenic magnetic force microscopy (MFM). The observation of magnetic contrast across domain walls and step edges confirms that the antiferromagnetic order persists to the surface layers. The magnetic field dependence of the MFM images reveals that the surface magnetic layer undergoes a first-order spin-flip transition at a magnetic field that is lower than the bulk transition, in excellent agreement with a revised Mills model. Our analysis suggests no reduction of the order parameter in the surface magnetic layer, implying robust ferromagnetism in the single-layer limit. The direct visualization of surface spin-flip transition not only opens up exploration of surface metamagnetic transitions in layered antiferromagnets, but also provides experimental support for realizing quantized transport in ultrathin films of MnBi 4 Te 7 and other natural superlattice topological magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elucidating the Initial Steps in α-Uranium Hydriding Using First-Principles Calculations

Hydrogen embrittlement of uranium, which arises due to the formation of a structurally weak pyrophoric hydride, poses a major safety risk in material applications. Previous experiments have shown that hydriding begins on the top or near the surface (i.e., subsurface) of α-uranium. However, the fundamental molecular-level mechanism of this process remains unknown. Here, in this work, starting from pristine α-U bulk and surfaces, we present a systematic investigation of possible mechanisms for the formation of metal hydride. Specifically, we address this problem by examining the individual steps of hydrogen embrittlement, including surface adsorption, subsurface absorption, and the interlayer diffusion of atomic hydrogen. Furthermore, by examining these processes across different facets, we highlight the importance of both (1) hydrogen monolayer coverage and (2) applied tensile strain on hydriding kinetics. Taken together, by studying previously overlooked phenomena, this study provides foundational insights into the initial steps of this overall complex process. We anticipate that this work will guide near-term future development of multiscale kinetic models for uranium hydriding and subsequently identify potential strategies to mitigate this undesired process.

36 MATERIALS SCIENCE↗

Direct Deoxygenation of Phenol over Fe-Based Bimetallic Surfaces Using On-the-Fly Surrogate Models

We present an accelerated nudged elastic band (NEB) study of phenol direct deoxygenation (DDO) on Fe-based bimetallic surfaces using a recently developed Gaussian process regression (GPR) calculator. Our test calculations demonstrate that the GPR calculator achieves up to 3 times speedup compared to conventional density functional theory calculations while maintaining high accuracy, with energy barrier errors below 0.015 eV. Using GPR-NEB, we systematically examine the DDO mechanism on pure Fe(110) and surfaces modified with Co and Ni in both top and subsurface layers. Our results show that subsurface Co and Ni substitutions preserve favorable thermodynamics and kinetics for both C–O bond cleavage and C–H bond formation, comparable to those on the pure Fe(110) surface. In contrast, top-layer substitutions generally increase the C–O bond cleavage barrier, render the step endothermic, and result in significantly higher reverse reaction rates, making DDO unfavorable on these surfaces. This work demonstrates the effectiveness of GRR-accelerated transition state searches for complex surface reactions and provides insights into rational design of bimetallic catalysts for selective deoxygenation.

Aromatic compounds↗

HFIR SiC-SiC Composite Clad Tube Bowing Test: Pre-Irradiation Characterization

This report describes the pre-irradiation characterization of the SiC-SiC composite clad tube bowing experiment that will be irradiated in the High Flux Isotope Reactor (HFIR). There are concerns that SiCSiC fuel cladding in light water reactors could undergo bowing because of the non-uniform fast neutron flux profiles. This experiment is combined with the SiC-SiC channel box experiment, which has similar concerns regarding control blade movements in boiling water reactors. The HFIR experiment aims to validate the predicted deformation and stresses in the composite clad specimen after the exposure of fast neutron flux gradients. Significant radial fast neutron flux gradients that exist in the permanent reflector of HFIR were thoroughly characterized by using detailed 3D neutronic calculations. The 3D displacement damage dose rate profile and the resulting volumetric swelling in SiC were used as inputs to structural analyses to determine the predicted deformation that will affect the specimens. The tube specimens were characterized by using traditional dimensional inspection and surface profilometry to provide detailed information regarding the pre-irradiation condition as the first step to evaluate the radiation-induced deformation. Furthermore, fine engraving markers were inscribed along all outer surfaces of the specimen and mapped by using a digital microscope and a multidimensional stage. This allows marker spacings to be accurately measured and compared with similar measurements that will be made post-irradiation to provide local radiation-induced strain mapping. The experiment successfully completed two HFIR cycle irradiations, cycles 492 and 493, which finished on July 25, 2021.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Next generation extended Lagrangian first principles molecular dynamics

Extended Lagrangian Born-Oppenheimer molecular dynamics [Phys. Rev. Lett., 100, 123004 (2008)] is formulated for general Hohenberg-Kohn density functional theory and compared to the extended Lagrangian framework of rst principles molecular dynamics by Car and Parrinello [Phys. Rev. Lett. 55, 2471 (1985)]. It is shown how extended Lagrangian Born-Oppenheimer molecular dynamics overcomes several shortcomings of regular, direct Born-Oppenheimer molecular dynamics, while improving or maintaining important features of Car-Parrinello simulations. The accuracy of the electronic degrees of freedom in extended Lagrangian Born-Oppenheimer molecular dynamics, with respect to the exact Born-Oppenheimer solution, is of second order in the size of the integration time step and of fourth order in the potential energy surface. Improved stability over recent formulations of extended Lagrangian Born-Oppenheimer molecular dynamics is achieved by generalizing the theory to finite temperature ensembles, using fractional occupation numbers in the calculation of the inner-product kernel of the extended harmonic oscillator that appears as a preconditioner in the electronic equations of motion. Materials systems that normally exhibit slow self-consistent field convergence can be simulated using integration time steps of the same order as in direct Born- Oppenheimer molecular dynamics, but without the requirement of an iterative, non-linear electronic ground state optimization prior to the force evaluations and without a systematic drift in the total energy. In combination with proposed low-rank and on-the- y updates of the kernel, this formulation provides an efficient and general framework for quantum based Born-Oppenheimer molecular dynamics simulations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Supercapacitance and oxygen reduction characteristics of sulfur self-doped micro/mesoporous bio-carbon derived from lignin

The growing global concerns about the increased fossil fuel consumption and related environmental issues have motived scientists to find new, green and sustainable energy resources and technologies. In this work, byproduct lignin biomass was successfully converted into sulfur self-doped carbon via in-situ hydrothermal carbonization followed by thermal annealing. The sulfur surface content in the as-prepared porous carbon is up to 3.2 wt % as indicated by the XPS measurements. Beyond the traditional synthesis methods which employ KOH or ZnCl 2 treatment to activate the carbon surface, the developed synthesis strategy doesn't include such separate activation step. Activation of the as-prepared porous carbons has been conducted in-situ via a calcium ions during the synthesis process. The resulting materials displayed high BET surface areas up to 660 m 2 g -1 along with micro/meso porosity and graphitic/amorphous carbon structure. The as-prepared sulfur self-doped electrode materials displayed high electrochemical activity for supercapacitor applications. The sulfur-doped carbon SC-850 electrode exhibited capacitance of 225 F/g at a current density of 0.5 A/g, and high durability where the electrode capacitance did not change over 10,000 cycles at harsh conditions. Additionally, the as-prepared sulfur-doped carbons are promising catalysts for oxygen reduction reaction with 3.4 electrons transferred per molecule at 0.8 V, which approaches the optimum 4-electron pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Efficiency, Low-Cost III-V Solar Cells by Dynamic Hydride Vapor Phase Epitaxy Coupled with Rapid, Polishing-Free Wafer Reuse through Orientation-Optimized (110) Spalling

We demonstrated (110) GaAs solar cells grown by D-HVPE with equivalent performance and material quality relative to (100) devices. Also, we developed a procedure for repeatable wafer-scale spalling of (110) GaAs. Spalled surfaces were free of the facets founds in (100) GaAs spalling, the large arrest lines found in (100) Ge spalling, and surface features greater than 3 µm in peak-to-valley height, which can otherwise degrade the efficiency of regrown III-V devices. A sub-µm step-terrace morphology was discovered on the post-spall wafer surface, resulting from the restricted cleavage system of GaAs, but we developed understanding of the factors that determine the resulting morphology, enabling ample opportunity for optimization of morphologies suitable for device growth and spall depth waste minimization on (110) GaAs. Lastly, we demonstrated a device grown on a previously spalled surface with only 8% relative efficiency difference to a cell grown on a new unspalled wafer. Significant optimization of the substrate regrowth conditions are required to enable higher efficiency, but these results highlight the promise of (110)-oriented devices coupled with substrate reuse by spalling as a pathway for low-cost III-V photovoltaics.

14 SOLAR ENERGY↗

Does H 2 Temperature‐Programmed Reduction Always Probe Solid‐State Redox Chemistry? The Case of Pt/CeO 2

Abstract Redox reactions on the surface of transition metal oxides are of broad interest in thermo, photo, and electrocatalysis. H 2 temperature‐programmed reduction (H 2 ‐TPR) is commonly used to probe oxide reducibility by measuring the rate of H 2 consumption during temperature ramps, assuming that this rate is controlled by oxide reduction. However, oxide reduction involves several elementary steps, such as H 2 dissociation and H‐spillover, before surface reduction and H 2 O formation occur. In this study, we evaluated the kinetics of H 2 consumption over CeO 2 and Pt/CeO 2 with varying Pt loadings and structures to identify the elementary steps probed by H 2 ‐TPR. Literature often attributes changes in H 2 ‐TPR characteristics with Pt addition to increased CeO 2 reducibility. However, our analysis revealed that the H 2 consumption rate is measurement of the rate of H‐spillover at Pt‐CeO 2 interfaces and is determined by the concentration of Pt species on Pt nanoclusters that dissociate H 2 . Therefore, lower temperature H 2 consumption observed with Pt addition does not indicate higher CeO 2 reducibility. Measurements on samples with mixtures of Pt single‐atoms and nanoclusters demonstrated that H 2 ‐TPR can effectively quantify dilute Pt nanocluster concentrations, suggesting caution in directly linking H 2 ‐TPR characteristics to oxide reducibility while highlighting alternative material insights that can be gleaned.

Lee, Jaeha↗

Synthesis and characterization of nanoapatites organofunctionalized with aminotriphosphonate agents

Organofunctionalized apatite nanoparticles were prepared using a one step process involving dissolution/precipitation of natural phosphate rock and covalent grafting of nitrilotris(methylene)triphosphonate (NTP). The synthesized materials were characterized by Brunauer-Emmett-Teller (BET) surface measurement, thermogravimetry, inductively coupled plasma emission spectroscopy (ICP-ES), elemental analysis, multinuclear solid state cross-polarization/magic angle spinning (CP/MAS) and single-pulse NMR spectroscopy, transmission electron microscopy (TEM) and energy dispersive X-ray analysis (EDXA). After grafting BET measurements yielded particle specific surface areas ranging from 88 to 193 m{sup 2} g{sup -1} depending on the grafted phosphonate. The results show that the surfaces of the nanoapatite particles can be covered with functional groups bound through a variable number of R-P-O-Ca bonds to render them organoapatites. - Graphical Abstract: Hydroxyapatite in the form of naturally occurring phosphate rock is converted in the presence of nitrilotris(methylene)triphosphonate (NTP) to high surface area apatite nanoparticles (dimensions measured by TEM) with NTP-functionalized surfaces. Highlights: Black-Right-Pointing-Pointer Surface functionalized hydroxyapatite nanoparticles are prepared from natural phosphate rock in a one-step process. Black-Right-Pointing-Pointer Covalent grafting of amine phosphonates to the nanoparticle surface is simultaneously accomplished by the presence of the organic molecules in the solution. Black-Right-Pointing-Pointer Mesoporous particles of high surface area are created. Black-Right-Pointing-Pointer Surface coverage is controlled by the concentration of amine phosphonate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Mesocrystal‐Like Morphology Formed by Classical Polymer‐Mediated Crystal Growth

Abstract Growth by oriented assembly of nanoparticles is a widely reported phenomenon for many crystal systems. While often deduced through morphological analyses, direct evidence for this assembly behavior is limited and, in the calcium carbonate (CaCO 3 ) system, has recently been disputed. However, in the absence of a particle‐based pathway, the mechanism responsible for the creation of the striking morphologies that appear to consist of subparticles is unclear. Therefore, in situ atomic force microscopy is used to investigate the growth of calcite crystals in solutions containing a polymer additive known for its ability to generate crystal morphologies associated with mesocrystal formation. It is shown that classical growth processes that begin with impurity pinning of atomic steps, leading to stabilization of new step directions, creation of pseudo‐facets, and extreme surface roughening, can produce a microscale morphology previously attributed to nonclassical processes of crystal growth by particle assembly.

Smeets, Paul J. M.↗

The etching process of boron nitride by alkali and alkaline earth fluorides under high pressure and high temperature

Graphical abstract: - Highlights: • Appropriate etch processes of hBN and cBN under HPHT are proposed. • The degree of the crystallization of hBN was decreased. • A special cBN growth mechanism with a triangular unit is proposed. • Plate-shape cBN crystals with large ratio of length to thickness were obtained. • A strategy provides useful guidance for controlling the cBN morphology. - Abstract: Some new etching processes of hexagonal boron nitride (hBN) and cubic boron nitride (cBN) under high pressure and high temperature in the presence of alkali and alkaline earth fluorides have been discussed. It is found that hBN is etched distinctly by alkali and alkaline earth fluorides and the morphology of hBN is significantly changed from plate-shape to spherical-shape. Based on the “graphitization index” values of hBN, the degree of the crystallization of hBN under high pressure and high temperature decreases in the sequence of LiF > CaF{sub 2} > MgF{sub 2}. This facilitates the formation of high-quality cBN single crystals. Different etch steps, pits, and islands are observed on cBN surface, showing the strong etching by alkali and alkaline earth fluorides and the tendency of layer-by-layer growth. A special layer growth mechanism of cBN with a triangular unit has been found. Furthermore, the morphologies of cBN crystals are apparently affected by a preferential surface etching of LiF, CaF{sub 2} and MgF{sub 2}. Respectively, the plate-shape and tetrahedral cBN crystals can be obtained in the presence of different alkali and alkaline earth fluorides.

36 MATERIALS SCIENCE↗

Real-time elucidation of catalytic pathways in CO hydrogenation on Ru

Here, the direct elucidation of the reaction pathways in heterogeneous catalysis has been challenging due the short-lived nature of reaction intermediates. Here, we directly measured on ultrafast timescales the initial hydrogenation steps of adsorbed CO on a Ru catalyst surface, which is known as the bottleneck reaction in syngas and CO 2 reforming processes. We initiated the hydrogenation of CO with an ultrafast laser temperature jump and probed transient changes in the electronic structure using real-time x-ray spectroscopy. In combination with theoretical simulations, we verified the formation of CHO during CO hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Perspective on the Selective Catalytic Reduction (SCR) of NO with NH 3 by Supported V 2 O 5 –WO 3 /TiO 2 Catalysts

We report the selective catalytic reduction (SCR) of NO x with NH 3 to harmless N 2 and H 2 O plays a crucial role in reducing highly undesirable NO x acid gas emissions from large utility boilers, industrial boilers, municipal waste plants, and incinerators. The supported V 2 O 5 –WO 3 /TiO 2 catalysts have become the most widely used industrial catalysts for these SCR applications since introduction of this technology in the early 1970s. Lastly, this Perspective examines the current fundamental understanding and recent advances of the supported V 2 O 5 –WO 3 /TiO 2 catalyst system: (i) catalyst synthesis, (ii) molecular structures of titaniasupported vanadium and tungsten oxide species, (iii) surface acidity, (iv) catalytic active sites, (v) surface reaction intermediates, (vi) reaction mechanism, (vii) ratedetermining- step, and (viii) reaction kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimerization of Linear Butenes on Zeolite-Supported Ni 2+

Nickel- and alkali-earth-modified LTA based zeolites catalyze the dimerization of 1-butene in the absence of Bronsted acid sites. The catalyst reaches over 95% selectivity to n-octenes and methylheptenes. The ratio of these two dimers is markedly influenced by the parallel isomerization of 1-butene to 2-butene, shifting the methylheptene/octene ratio from 0.7 to 1.4 as the conversion increases to 35%. At this conversion, the thermodynamic equilibrium of 90% cis- and trans-2-butenes is reached. Conversion of 2-butene results in methylheptene and dimethylhexene with rates that are 1 order of magnitude lower than those with 1-butene. The catalyst is deactivated rapidly by strongly adsorbed products in the presence of 2-butene. The presence of pi-allyl-bound butene and Ni-alkyl intermediates was observed by IR spectroscopy, suggesting both to be reaction intermediates in isomerization and dimerization. Product distribution and apparent activation barriers suggest 1-butene dimerization to occur via a 1'-adsorption of the first butene molecule and a subsequent 1'- or 2'-insertion of the second butene to form octene and methylheptene, respectively. The reaction order of 2 for 1-butene and its high surface coverage suggest that the rate-determining step involves two wealdy adsorbed butene molecules in addition to the more strongly held butene.

Ehrmaier, Andreas↗

Nanoscale structure and morphology of atomic layer deposition platinum on SrTiO{sub 3} (001).

The early stages of nucleation and growth of atomic layer deposition (ALD) platinum on SrTiO{sub 3} (001) have been studied. Scanning electron microscopy reveals the ALD Pt deposits as discrete nanoparticles that grow and coalesce with increasing number of ALD cycles, ultimately resulting in a continuous film after {approx}40 cycles. Atomic force microscopy shows the films to be fine-grained and highly conformal such that the 0.4 nm atomic steps of the underlying SrTiO{sub 3} (001) surface remain visible even after 80 Pt ALD cycles. Grazing-incidence small-angle X-ray scattering (GISAXS) studies demonstrate that the early stages of Pt ALD yields nanoparticles that are well approximated as cylinders with a height to radius ratio that is nearly unity. Consistent with nanoparticle coalescence, GISAXS also reveals an interparticle spacing that increases with the number of ALD cycles. X-ray fluorescence measurements of the Pt coverage reveal growth dynamics in which the Pt deposition is initially faster than the steady-state growth rate that emerges after 40-70 ALD cycles. These experimental results are understood through the application of a model that suggests that the SrTiO{sub 3} surface is more reactive than the Pt species and that Pt diffusion is operative in nanoparticle formation. Overall, this study delineates ALD growth conditions for forming either Pt nanoparticles or continuous Pt thin films on SrTiO3 (001), thus presenting potentially useful substrates for catalysis and microelectronics, respectively.

36 MATERIALS SCIENCE↗

Surfactants Used in Colloidal Synthesis Modulate Ni Nanoparticle Surface Evolution for Selective CO 2 Hydrogenation

Colloidal chemistry holds promise to prepare uniform and size-controllable pre-catalysts; however, it remains a challenge to unveil the atomic-level transition from pre-catalysts to active catalytic surfaces under the reaction conditions to enable the mechanistic design of catalysts. In this work, we report an ambient-pressure X-ray photoelectron spectroscopy study, coupled with in situ environmental transmission electron microscopy, infrared spectroscopy, and theoretical calculations, to elucidate the surface catalytic sites of colloidal Ni nanoparticles for CO 2 hydrogenation. We show that Ni nanoparticles with phosphine ligands exhibit a distinct surface evolution compared with amine-capped ones, owing to the diffusion of P under oxidative (air) or reductive (CO 2 + H 2 ) gaseous environments at elevated temperatures. The resulting NiP x surface leads to a substantially improved selectivity for CO production, in contrast to the metallic Ni, which favors CH 4 . The further elimination of surface metallic Ni sites by designing multi-step P incorporation achieves unit selectivity of CO in high-rate CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗