Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

Fuel efficiency through new airframe technology

In its Aircraft Energy Efficiency Program, NASA has expended approximately 200 million dollars toward development and application of advanced airframe technologies to United States's commercial transports. United States manufacturers have already been given a significant boost toward early application of advanced composite materials to control surface and empennage structures and toward selected applications of active controls and advanced aerodynamic concepts. In addition, significant progress in definition and development of innovative, but realistic systems for laminar flow control over the wings of future transports has already been made.

Leonard, R. W.↗

Characteristics of EMI generated by negative metal-positive dielectric voltage stresses due to spacecraft charging

Charging of spacecraft surfaces by the environmental plasma can result in differential potentials between metallic structure and adjacent dielectric surfaces in which the relative polarity of the voltage stress is either negative dielectric/positive metal or negative metal/positive dielectric. Negative metal/positive dielectric is a stress condition that may arise if relatively large areas of spacecraft surface metals are shadowed from solar UV and/or if the UV intensity is reduced as in the situation in which the spacecraft is entering into or leaving eclipse. The results of experimental studies of negative metal/positive dielectric systems are given. Information is given on: enhanced electron emission I-V curves; e(3) corona noise vs e(3) steady-state current; the localized nature of e(3) and negative metal arc discharge currents; negative metal arc discharges at stress thresholds below 1 kilovolt; negative metal arc discharge characteristics; dependence of blowoff arc discharge current on spacecraft capacitance to space (linear dimension); and damage to second surface mirrors due to negative metal arcs.

Chaky, R. C.↗

Topological reaction rate measurements related to scuffing

A ball-on-plate (both consisting of hardened M-50 steel) sliding elastohydrodynamic contact was run with trimethylolpropane triheptanoate (TMPTH) with and without tricresyl phosphate (TCP). The contact area of the plate was optically profiled with a phase-locked interference microscope (PLIM) both before and after exposure to alcoholic hydrochloric acid. As scuffing was approached, the profile within the contact region changed more rapidly after the acid treatment; after scuffing, it assumed a constant high value. A metallurgical phase found in the scuff mark was apparently responsible for the high reactivity. The microscopic profile changes (sensitivity, + or - 3 nm (+ or - A) in depth) involved primarily the small asperities (radius, 3 microns); the larger ones were unaffected. Soaking the steel in TCP smoothed the fine structure of the surface profile but increased its reactivity toward alcoholic hydrochloric acid before sliding was started. Thus it would appear that PLIM examination could be used for screening potentially scuff-resistant materials.

Lauer, J. L.↗

Venus global radar reflectivity and correlations with elevation

A geological analysis of the global radar reflectivity data for Venus is presented. The statistical and map pattern distribution of the radar reflectivity rho is first analyzed in the context of the porosity structure of the surface. Rho is then correlated with elevation in order to examine the degree of topographic control on material properties which could depend on PT-sensitive chemical weathering phenomena. Comparison of the rms slope alpha and rho correlations with elevation demonstrates that there are distinct topographic zones defined on the basis of the rho and alpha trends. Finally, hierarchical clustering analysis is applied to the global rho, alpha, and 100-km baseline regional slope data sets in order to define radar property-related subregions.

Garvin, J. B.↗

Interactive color graphical postprocessing as a unifying influence in numerical analysis research

The general capabilities and the hardware environment of an interactive color graphical postprocessor for three-dimensional numerical analysis are described as well as the synergistic influence of this aspect of interactive graphics on the research environment. Areas of practical concern include finite element analysis, fracture propagation, surface and framed structures. The interactive color graphical postprocessor, POSTPRO3D, is capable of displaying the scalar, vector, and tensor results of finite difference, finite element, and boundary element analysis. In the case of fatigue cracking in steel crane-rail girders, it was shown that POSTPRO3D offers a high level of flexibility, interactivity and features which minimize response time.

Abel, J. F.↗

Practical method for highly accurate large-scale surface calculations

An accurate and efficient film linearized muffin-tin orbital (FLMTO) technique for surface electronic-structure calculations is presented which uses only 60-70 basis functions, as opposed to the 300 functions used in the linear augmented plane-wave method. Calculations for three different (3d and 4d) transition-metal films resulted in high quality results for five-layer slabs of Cu(001), Fe(001), and Ru(001), in addition to good results for the work functions and projected density of states. By retaining the LMTO small basis size, computer time and memory are reduced, making practical the study of systems with a larger number of atoms in the two-dimensional unit cell.

Fernando, G. W.↗

Spaceborne imaging radar research in the 90's

The imaging radar experiments on SEASAT and on the space shuttle (SIR-A and SIR-B) have led to a wide interest in the use of spaceborne imaging radars in Earth and planetary sciences. The radar sensors provide unique and complimentary information to what is acquired with visible and infrared imagers. This includes subsurface imaging in arid regions, all weather observation of ocean surface dynamic phenomena, structural mapping, soil moisture mapping, stereo imaging and resulting topographic mapping. However, experiments up to now have exploited only a very limited range of the generic capability of radar sensors. With planned sensor developments in the late 80's and early 90's, a quantum jump will be made in our ability to fully exploit the potential of these sensors. These developments include: multiparameter research sensors such as SIR-C and X-SAR, long-term and global monitoring sensors such as ERS-1, JERS-1, EOS, Radarsat, GLORI and the spaceborne sounder, planetary mapping sensors such as the Magellan and Cassini/Titan mappers, topographic three-dimensional imagers such as the scanning radar altimeter and three-dimensional rain mapping. These sensors and their associated research are briefly described.

Elachi, Charles↗

Wavenumber spectra of Pacific winds measured by the Seasat scatterometer

Vector winds measured by the Seasat-A Satellite Scatterometer (SASS) are analyzed to determine the spatial structure of oceanic surface winds over wavelengths from 200 to 2200 km. The analysis is performed in four latitudinal bands in the Pacific Ocean. The salient features of the results are summarized as follows: (1) for each of the four geographic regions, the spectra of meridional and zonal wind components and of kinetic energy are consistent with a power-law dependence on wavenumber; for midlatitude regions in both the Northern and Southern hemispheres the wave-number dependence of kinetic energy is k exp -2.2, while for tropical regions in both hemispheres it is k exp-1.9, (2) for each individual region, the spectral dependence on wavenumber is nearly the same for both velocity components and for kinetic energy, (3) comparisons of zonal and meridional component spectra indicate that midlatitude winds may be isotropic, while tropical winds may be significantly anisotropic, and (4) the coherence between wind components is small everywhere.

Freilich, M. H.↗

Liquid oxygen sloshing in Space Shuttle External Tank

This paper describes a numerical simulation of the hydrodynamics within the liquid oxygen tank of the Space Shuttle External Tank during liftoff. Before liftoff, the tank is filled with liquid oxygen (LOX) to approximately 97 percent with the other 3 percent containing gaseous oxygen (GOX) and helium. During liftoff, LOX is drained from the bottom of the tank, and GOX is pumped into the tank's ullage volume. There is a delay of several seconds before the GOX reaches the tank which causes the ullage pressure to decrease for several seconds after liftoff; this pressure 'slump' is a common phenomenon in rocket propulsion. When four slosh baffles were removed from the tank, the ullage gas pressure dropped more rapidly than in all previous flights. The purpose of this analysis was to determine whether the removal of the baffles could have caused the increased pressure 'slump' by changing the LOX surface dynamics. The results show that the LOX surface undergoes very high vertical accelerations (up to 5 g) and, therefore, splashing almost certainly occurs. The number of baffles does not affect the surface if the structural motion is assumed; but, the number of baffles may affect the structural motion of the tank.

Kannapel, M. D.↗

Photogeological inferences of Martian surface composition

Photogeological mapping provides a systematic documentation of geologic observations and included the identification of surface materials and structures, and determination of their sequence of formation. It is concluded that photogeologic mapping shows the presence of a wide range of materials on Mars. Many of which appear to be volcanic. The knowledge of the composition of these materials is poorly constrained. Inferences drawn from the morphology of individual flows would suggest that most of the materials had rheological properties similar to basalt or other mafic magmas.

Greeley, R.↗

CCD photometry of globular cluster core structure. I - NGC 6388, NGC 6624, and M15: One flat core and two cusps

The first results of a major survey of globular cluster core structure are reported. Surface brightness profiles for three clusters are presented: one with a normal flat core profile (NGC 6388), and two with central cusps (NGC 6624 and M15). The profiles are fitted with both seeing-convolved King models and seeing-convolved power laws. A King model provides a reasonable fit to the entire profile of NGC 6388, but there are no acceptable King profiles for NGC 6624 and M15. For these two clusters, a seeing-convolved power law provides a good fit to the inner part of the profile, while a King model gives a good fit to the outer part of the profile. The interpretation of the measured power-law slopes of the central surface brightness cusps of NGC 6624 and M15 are discussed in terms of models for core collapse in a multicomponent cluster.

Lugger, Phyllis M.↗

DSN 70-meter antenna X-band gain, phase, and pointing performance, with particular application for Voyager 2 Neptune encounter

The gain, phase, and pointing performance of the Deep Space Network (DSN) 70 m antennas are investigated using theoretical antenna analysis computer programs that consider the gravity induced deformation of the antenna surface and quadripod structure. The microwave effects are calculated for normal subreflector focusing motion and for special fixed-subreflector conditions that may be used during the Voyager 2 Neptune encounter. The frequency stability effects of stepwise lateral and axial subreflector motions are also described. Comparisons with recently measured antenna efficiency and subreflector motion tests are presented. A modification to the existing 70 m antenna pointing squint correction constant is proposed.

Slobin, S. D.↗

Integration of space and in situ observations to study global climate change

The use of model-based global data sets of atmospheric circulation for studying fundamental dynamical and physical processes is discussed, focusing on limitations of the available model-based data sets. Data from the Global Weather Experiment in 1979 were analyzed by two authorized level IIIb data centers in 1980 and in 1981. The analyses led to difference in data-sparse regions such as the tropics. Study areas which can be addressed by an internally-consistent long-term multivariate data set for the atmospheric circulation are considered, including mean climate, forcing for the ocean models, global hydrological cycle, atmospheric energetics, intraseasonal variability, land surface processes, and structure and variability of vertical velocity, divergence, and diabatic heating. It is concluded that the most comprehensive technique for integrating space and in situ observations to produce this type of data set would be a four-dimensional data assimilation system with a realistic physical model of the type employed in operational numerical weather prediction.

Bengtsson, L.↗

Hypersonic blunt body computations including real gas effects

Various second-order explicit and implicit TVD shock-capturing methods, a generalization of Roe's approximate Riemann solver, and a generalized flux-vector splitting scheme are used to study two-dimensional hypersonic real-gas flows. Special attention is given to the identification of some of the elements and parameters which can affect the convergence rate for high Mach numbers or real gases, but have negligible effect for low Mach numbers, for cases involving steady-state inviscid blunt flows. Blunt body calculations at Mach numbers of greater than 15 are performed to treat real-gas effects, and impinging shock results are obtained to test the treatment of slip surfaces and complex structures. Even with the addition of improvements, the convergence rate of algorithms in the hypersonic flow regime is found to be generally slower for a real gas than for a perfect gas.

Montagne, J.-L.↗

Spectroscopic analysis of transition state energy levels - Bending-rotational spectrum and lifetime analysis of H3 quasibound states

Converged quantum mechanical calculations of scattering matrices and transition probabilities are reported for the reaction of H with H2 with total angular momentum 0, 1, and 4 as functions of total energy in the range 0.85-1.15 eV on an accurate potential energy surface. The resonance structure is illustrated with Argand diagrams. State-to-state reactive collision delay times and lifetimes are presented. For J = 0, 1, and 4, the lowest-energy H3 resonance is at total energies of 0.983, 0.985, and 1.01 eV, respectively, with lifetimes of about 16-17 fs. For J = 1 and 4 there is a higher-energy resonance at 1.10-1.11 eV. For J = 1 the lifetime is about 4 fs and for J = 4 it is about 1 fs.

Zhao, Meishan↗

The plume of the Yukon River in relation to the oceanography of the Bering Sea

The ecosystem of the northern Bering-Sea shelf was studied using data from the NOAA Very High Resolution Radiometer and AVHRR and the Landsat MSS and Thematic Mapper (TM) in conjunction with shipboard measurements. Emphasis was placed on the influence of the Yukon River on this inner shelf environment and on the evaluation of the utility of the new Landsat TM data for oceanography. It was found that the patterns of water mass distribution obtained from satellite images agreed reasonably well with the areal patterns of temperature, salinity, and phytoplankton distributions. The AVHRR, MSS, and TM data show that the Yukon-River discharge is warmer and more turbid than the surrounding coastal water that originates to the south; thus, the Yukon water contributes to the higher temperatures and lower transmissivity of the coastal water. The high resolution of the TM thermal IR band made it possible to observe complex patterns and structures in the surface water that could not be resolved on previous data sets.

Dean, Kenneson G.↗

Numerical simulation of separated and vortical flows on bodies at large angles of attack

Navier-Stokes computations were carried out for high-angle-of-attack flow about bodies of revolution in supersonic and subsonic flow. Numerical and physical factors affecting flow predictions are discussed. Accurate prediction of the complex three-dimensional separated flow is found to depend on using grids sufficiently fine to resolve the details of both the viscous boundary layer and the off-surface separated flow structures, and, for turbulent flow cases, use of an eddy-viscosity turbulence model which accounts for the leeward vortical flow structures. An example of high-incidence flow computed about a more complex geometry, the F-18 fighter fuselage forebody and leading edge extension, is also presented.

Schiff, Lewis B.↗

An overview of the asteroids

An introductory overview of the field of asteroid science is presented, with emphasis placed on the accomplishments of the 1980s. Following the survey of known asteroids, attention is given to the observations of asteroids with the IRAS. Particular consideration is given to the origin and evolution of asteroids and their interrelations. Possible future directions of asteroid research are discussed together with the potential of the Hubble Space Telescope for providing new data on asteroid surface chemistry, geology, structure, and morphology.

Binzel, Richard P.↗