Search NASA⌕ Search

SEARCH · Search NASA

Results for “uniform method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Application of the method of lines to planar transmission lines in waveguides with composite cross-sectional geometries

The analysis of a class of planar transmission lines in composite uniform waveguides which have a circular boundary over part of the cross-section and a rectangular boundary over the remainder is introduced. It is shown that the method of lines can be applied to such composite structures by taking advantage of the canonical geometry in each region. Results for the dispersion characteristics and impedance of a finline in such a structure are calculated.

Thorburn, M. A.↗
NASA NTRS1977

Class of near-perfect coded apertures

Coded aperture imaging of gamma ray sources has long promised an improvement in the sensitivity of various detector systems. The promise has remained largely unfulfilled, however, for either one of two reasons. First, the encoding/decoding method produces artifacts, which even in the absence of quantum noise, restrict the quality of the reconstructed image. This is true of most correlation-type methods. Second, if the decoding procedure is of the deconvolution variety, small terms in the transfer function of the aperture can lead to excessive noise in the reconstructed image. It is proposed to circumvent both of these problems by use of a uniformly redundant array (URA) as the coded aperture in conjunction with a special correlation decoding method.

Cannon, T. M.↗
DOE OSTI2025

Investigation of In Situ and Ex Situ Passivation of Pyrophoric Uranium–Niobium Alloy Powder

This work evaluates the effectiveness of in situ and ex situ passivation methods for mitigating the pyrophoricity of uranium–6 wt.% niobium spherical powders produced via the hydride–dehydride process coupled with plasma spheroidization. Oxide layer thickness was characterized using STEM/EDX, and pyrophoricity was assessed by a UN-recommended test method, which involves directly dropping the powders in the air. In situ passivation, performed by introducing flowing oxygen during spheroidization, produced oxide layers ranging from tens to hundreds of nanometers but resulted in inconsistent pyrophoricity mitigation at lower oxygen flow rates. Ex situ passivation, achieved by slow oxygen exposure over several months, formed uniform oxide layers of approximately 20 nm and consistently mitigated pyrophoricity. Despite requiring higher bulk oxygen content, in situ passivation enables faster processing and control of oxygen, while ex situ passivation achieves superior oxide uniformity with lower oxygen incorporation. These findings highlight the trade-offs between passivation methods and provide a foundation for improving the safety and scalability of reactive metal powder production.

U-6Nb↗
DOE OSTI2023

Assessing Methodologies for Detecting Water Intrusion in Wall Systems: Phase 2

Studies by the University of Florida, the Environmental Protection Agency (EPA) and the U.S. Department of Housing (HUD) have revealed that there is a substantial fraction of commercial and residential buildings that have been exposed to moisture resulting in damage or durability problems. Water intrusion into building envelope components leads to a variety of undesirable conditions such as mold, wood rot, corrosion, and aesthetic damage. Tests methods that are presently used to evaluate the amount of water intrusion into a building envelope component are usually qualitative in nature. For example, ASTM E 331, Standard Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference requires that you “observe and record points of water leakage, if any.” This test was originally developed to assess the performance of fenestration products but is commonly adapted to evaluate other enclosure assemblies. However, when it is typically used for walls, this procedure is limited to recognizing if the moisture is visually observable from the backside side of the sheathing. It does not address moisture that is absorbed in the layers of the building envelope component, which could impact the durability of the assembly. Clearly a quantitative means of determining water penetration would improve the quality of this type of test and assist with better understanding the resultant impact on enclosure assemblies. In 2018-20, Oak Ridge National Laboratory, in conjunction with the Air Barrier Association of America, initiated a research project to address this issue. The purpose of that study was to evaluate nine different methods of detecting moisture intrusion through a wall assembly. air and water barrier. The wall assemblies included metal frame construction faced with gypsum sheathing and both self-adhered and fluid applied air and water barriers (AWB) were evaluated for this exercise. This project did not test the efficacy of the different AWBs, rather, fasteners were purposely installed in various ways to foster water penetration and activate the different methods of detection. Each detection method was evaluated for five features that included simplicity of use, cost of implementation, whether the method was quantitative or subjective, accuracy, and applicability. A scale of green/yellow/red was used to assess each feature where green was acceptable, yellow was borderline, and red was not to be pursued at this time. This report covers additional research that has been undertaken to extend the activities initiated in this earlier project with refinements for specific detection methods and considerations for expansion related to field versus laboratory testing standards.

42 ENGINEERING↗
DOE OSTI2016

SU-D-206-03: Segmentation Assisted Fast Iterative Reconstruction Method for Cone-Beam CT

Purpose: Total Variation (TV) based iterative reconstruction (IR) methods enable accurate CT image reconstruction from low-dose measurements with sparse projection acquisition, due to the sparsifiable feature of most CT images using gradient operator. However, conventional solutions require large amount of iterations to generate a decent reconstructed image. One major reason is that the expected piecewise constant property is not taken into consideration at the optimization starting point. In this work, we propose an iterative reconstruction method for cone-beam CT (CBCT) using image segmentation to guide the optimization path more efficiently on the regularization term at the beginning of the optimization trajectory. Methods: Our method applies general knowledge that one tissue component in the CT image contains relatively uniform distribution of CT number. This general knowledge is incorporated into the proposed reconstruction using image segmentation technique to generate the piecewise constant template on the first-pass low-quality CT image reconstructed using analytical algorithm. The template image is applied as an initial value into the optimization process. Results: The proposed method is evaluated on the Shepp-Logan phantom of low and high noise levels, and a head patient. The number of iterations is reduced by overall 40%. Moreover, our proposed method tends to generate a smoother reconstructed image with the same TV value. Conclusion: We propose a computationally efficient iterative reconstruction method for CBCT imaging. Our method achieves a better optimization trajectory and a faster convergence behavior. It does not rely on prior information and can be readily incorporated into existing iterative reconstruction framework. Our method is thus practical and attractive as a general solution to CBCT iterative reconstruction. This work is supported by the Zhejiang Provincial Natural Science Foundation of China (Grant No. LR16F010001), National High-tech R&D Program for Young Scientists by the Ministry of Science and Technology of China (Grant No. 2015AA020917).

60 APPLIED LIFE SCIENCES↗
NASA NTRS1933

Formulas for the Stress Analysis of Circular Rings in a Monocoque Fuselage

The formulas given in this report provide a simplified method for the stress-analysis of fuselage bulkheads that are approximately circular rings of uniform cross section. Complicated load systems acting on a ring can usually be resolved into simplified load systems; and formulas for moment, axial force, and shear for such simplified load systems are given in this report. Illustrative examples showing the use of this method in practical stress-analysis work are also included.

Miller, Roy A↗
DOE OSTI2016

Towards uniformly dispersed battery electrode composite materials: Characteristics and performance

Battery electrodes are complex mesoscale systems comprised of electroactive components, conductive additives, and binders. In this report, methods for processing electrodes with dispersion of the components are described. To investigate the degree of material dispersion, a spin-coating technique was adopted to provide a thin, uniform layer that enabled observation of the morphology. Distinct differences in the distribution profile of the electrode components arising from individual materials physical affinities were readily identified. Hansen solubility parameter (HSP) analysis revealed pertinent surface interactions associated with materials dispersivity. Further studies demonstrated that HSPs can provide an effective strategy to identify surface modification approaches for improved dispersions of battery electrode materials. Specifically, introduction of surfactantlike functionality such as oleic acid (OA) capping and P3HT-conjugated polymer wrapping on the surface of nanomaterials significantly enhanced material dispersity over the composite electrode. The approach to the surface treatment on the basis of HSP study can facilitate design of composite electrodes with uniformly dispersed morphology and may contribute to enhancing their electrical and electrochemical behaviors. The conductivity of the composites and their electrochemical performance was also characterized. In conclusion, the study illustrates the importance of considering electronic conductivity, electron transfer, and ion transport in the design of environments incorporating active nanomaterials.

25 ENERGY STORAGE↗
DOE OSTI2017

Production of cerium dioxide microspheres by an internal gelation sol–gel method

An internal gelation sol-gel technique was used to prepare cerium dioxide microspheres with uniform diameters near 100 µm. In this process, chilled aqueous solutions containing cerium, hexamethylenetetramine (HMTA), and urea are transformed into a solid gel by heat addition and are subsequently washed, dried, and sintered to produce pure cerium dioxide. Cerous nitrate and ceric ammonium nitrate solutions were compared for their usefulness in microsphere production. Gelation experiments were performed with both cerous nitrate and ceric ammonium nitrate to determine desirable concentrations of cerium, HMTA, and urea in feed solutions as well as the necessary quantity of ammonium hydroxide added to cerium solutions. Analysis of the pH before and after sample gelation was found to provide a quantitative metric for optimal parameter selection along with subjective evaluations of gel qualities. The time necessary for chilled solutions to gel upon inserting into a hot water bath was determined for samples with a variety of parameters and also used to determine desirable formulations for microsphere production. A technique for choosing the optimal mixture of ceric ammonium nitrate, HMTA, and urea was determined using gelation experiments and used to produce microspheres by dispersion of the feed solution into heated silicone oil. Gelled spheres were washed to remove excess reactants and reaction products before being dried and sintered. X-ray diffraction of air-dried microspheres, sintered microspheres, and commercial CeO 2 powders indicated that air-dried and sintered spheres were pure CeO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2001

Multidisciplinary Aerospace Systems Optimization: Computational AeroSciences (CAS) Project

The report describes a method for performing optimization of a system whose analysis is so expensive that it is impractical to let the optimization code invoke it directly because excessive computational cost and elapsed time might result. In such situation it is imperative to have user control the number of times the analysis is invoked. The reported method achieves that by two techniques in the Design of Experiment category: a uniform dispersal of the trial design points over a n-dimensional hypersphere and a response surface fitting, and the technique of krigging. Analyses of all the trial designs whose number may be set by the user are performed before activation of the optimization code and the results are stored as a data base. That code is then executed and referred to the above data base. Two applications, one of the airborne laser system, and one of an aircraft optimization illustrate the method application.

Kodiyalam, S.↗
DOE OSTI2025

Fabricating Silver Nanowire–IZO Composite Transparent Conducting Electrodes at Roll-to-Roll Speed for Perovskite Solar Cells

This study addresses the challenges of efficient, large-scale production of flexible transparent conducting electrodes (TCEs). We fabricate TCEs on polyethylene terephthalate (PET) substrates using a high-speed roll-to-roll (R2R) compatible method that combines gravure printing and photonic curing. The hybrid TCEs consist of Ag metal bus lines (Ag MBLs) coated with silver nanowires (AgNWs) and indium zinc oxide (IZO) layers. All materials are solutions deposited at speeds exceeding 10 m/min using gravure printing. We conduct a systematic study to optimize coating parameters and tune solvent composition to achieve a uniform AgNW network. The entire stack undergoes photonic curing, a low-energy annealing method that can be completed at high speeds and will not damage the plastic substrates. The resulting hybrid TCEs exhibit a transmittance of 92% averaged from 400 nm to 1100 nm and a sheet resistance of 11 Ω/sq. Mechanical durability is tested by bending the hybrid TCEs to a strain of 1% for 2000 cycles. The results show a minimal increase (<5%) in resistance. The high-throughput potential is established by showing that each hybrid TCE fabrication step can be completed at 30 m/min. We further fabricate methylammonium lead iodide solar cells to demonstrate the practical use of these TCEs, achieving an average power conversion efficiency (PCE) of 13%. The high-performance hybrid TCEs produced using R2R-compatible processes show potential as a viable choice for replacing vacuum-deposited indium tin oxide films on PET.

14 SOLAR ENERGY↗
DOE OSTI2025

A Rapid, Sustainable, One‐step Mechanochemical Strategy for Synthesizing Gold Nanoparticle‐Doped Covalent Organic Frameworks

Doping gold nanoparticles within covalent organic frameworks (AuNPs@COFs) has garnered enormous momentum due to their unique properties and broad applications. Nevertheless, prevailing multi-step synthesis is plagued with low time efficiency, eco-unfriendliness, and tedious protocols. Herein, we introduce a rapid, sustainable, scalable, one-step mechanochemical strategy for synthesizing up to four AuNPs-doped COFs via steel ball milling within an hour under ambient conditions. This approach overcomes the synthetic barriers of conventional multi-step solution-based methods, such as extended reaction times (5 days), milligram scale, the use of toxic solvents, elevated temperatures, and reliance on external reducing agents. One exemplary AuNPs@COF (AuNPs@DMTP-TPB) exhibits high crystallinity, porosity, small AuNP size, and uniform dispersion (5.4±0.6 nm), surpassing its counterpart synthesized via multi-step solution-based methods (6.4±1.1 nm). Notably, the gram-scale synthesis of AuNPs@DMTP-TPB can be successfully achieved. Control experiments suggest that the in situ formation of AuNPs is attributed to the galvanic reduction of gold precursor by stainless steel apparatus. As a proof-of-concept catalytic application, AuNPs@DMTP-TPB demonstrates remarkable catalytic activity and recyclability for the aqueous reduction of 4-nitrophenol under ambient conditions. This study provides an environmentally benign and fast pathway to synthesize AuNPs@COFs via mechanochemistry for the first time, opening tremendous possibilities for heterogeneous catalysis and beyond.

Nailwal, Yogendra↗
DOE OSTI2017

Predicting Deformation Limits of Dual-Phase Steels Under Complex Loading Paths

The deformation limits of various DP980 steels are examined in this study with deformation instability theory. Under uniaxial tension, overall stress-strain curves of the material are estimated based on simple rule of mixture (ROM) with both iso-strain and iso-stress assumptions. Under complex loading paths, actual microstructure-based finite element (FE) method is used to explicitly resolve the deformation incompatibilities between the soft ferrite and hard martensite phases. The results show that, for uniaxial tension, the deformation instability theory with iso-strain-based ROM can be used to provide the lower bound estimate of the uniform elongation (UE) for the various DP980 considered. Under complex loading paths, the deformation instability theory with microstructure-based FE method can be used in examining the effects of various microstructural features on the deformation limits of DP980 steels.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Astrometric Reduction of Phoebe Using a Digital Shape Model

The Cassini Imaging Science Subsystem (ISS) has provided the most spectacular images of the Saturnian system [1] and these observations constitute a fundamental dataset of high accuracy and exceptionally long-time span for the purpose of astrometry [2]. Several elaborate astrometric efforts using Cassini ISS data have demonstrated their use for the development and maintenance of the Saturnian satellite ephemerides and have been critical in improving our understanding of their secular orbital evolution and interior properties[3].Astrometric efforts using images with well-resolved bodies often employ limb-based methods for center finding; this is proven to be robust for satellites with a uniform ellipsoidal shape. However, systematic biases are of concern for bodies that deviate considerably from tri-axial ellipsoids(e.g., moons with irregular shapes and/or extensive features such as craters, ridges, slumps and grooves). To help understand such biases, we used the Goddard Image Analysis and Navigation Tool (GIANT) [4,5]to improve the astrometric reduction of these moons. Here we apply the method to Phoebe (Saturn IX).

V Viswanathan↗
DOE OSTI2016

Lagrangian Material Tracers (LMT) for Simulating Material Damage in ALEGRA

A method for providing non-diffuse transport of material quantities in arbitrary Lagrangian-Eulerian (ALE) dynamic solid mechanics computations is presented. ALE computations are highly desirable for simulating dynamic problems that incorporate multiple materials and large deformations. Despite the advantages of using ALE for such problems, the method is associated with diffusion of material quantities due to the advection transport step of the computational cycle. This drawback poses great difficulty for applications of material failure for which discrete features are important, but are smeared out as a result of the diffusive advection operation. The focus of this work is an ALE method that incorporates transport of variables on discrete, massless points that move with the velocity field, referred to as Lagrangian material tracers (LMT), and consequently prevents diffusion of certain material quantities of interest. A detailed description of the algorithm is provided along with discussion of its computational aspects. Simulation results include a simple proof of concept, verification using a manufactured solution, and fragmentation of a uniformly loaded thin ring that clearly demonstrates the improvement offered by the ALE LMT method.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Application of State Quantization-Based Methods in HEP Particle Transport Simulation

Simulation of particle-matter interactions in complex geometries is one of the main tasks in high energy physics (HEP) research. An essential aspect of it is an accurate and efficient particle transportation in a non-uniform magnetic field, which includes the handling of volume crossings within a predefined 3D geometry. Quantized State Systems (QSS) is a family of numerical methods that provides attractive features for particle transportation processes, such as dense output (sequences of polynomial segments changing only according to accuracy-driven discrete events) and lightweight detection and handling of volume crossings (based on simple root-finding of polynomial functions). In this work we present a proof-of-concept performance comparison between a QSS-based standalone numerical solver and an application based on the Geant4 simulation toolkit, with its default Runge-Kutta based adaptive step method. In a case study with a charged particle circulating in a vacuum (with interactions with matter turned off), in a uniform magnetic field, and crossing up to 200 volume boundaries twice per turn, simulation results showed speedups of up to 6 times in favor of QSS while it being 10 times slower in the case with zero volume boundaries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Simultaneous Ligand Exchange Fabrication of Flexible Perovskite Solar Cells using Newly Synthesized Uniform Tin Oxide Quantum Dots

Halide perovskite solar cells (HPSCs) have a significant potential for future photovoltaic systems because of a high power conversion efficiency (PCE) exceeding 23% using solution processing methods. A low-temperature processed oxide layer is a challenging issue for large-scale manufacture of flexible and low-cost HPSCs. Here, we propose a simple reverse micelle-water injection method for highly dispersed ligand-capped ultrafine SnO2 quantum dots (QD). Interestingly, we observed that the ligands, which help in the formation of a uniform SnO2 QD thin film, spontaneously exchange for halide through a perovskite solution, and finally we form a suitable SnO2 QD-halide junction for high-performance HPSCs. The flexible HPSC with the SnO2 QD-halide junction formed via the ligand exchange exhibits a high PCE of 17.7% using a flexible substrate. It also shows an excellent flexibility, where the initial PCE is maintained within 92% after 1000 bending cycles with a bending radius of 18 mm.

14 SOLAR ENERGY↗
NASA NTRS2016

Mesh Convergence Requirements for Composite Damage Models

The ability of the finite element method to accurately represent the response of objects with intricate geometry and loading renders the finite element method as an extremely versatile analysis technique for structural analysis. Finite element analysis is routinely used in industry to calculate deflections, stress concentrations, natural frequencies, buckling loads, and much more. The method works by discretizing complex problems into smaller, simpler approximations that are valid over small uniform domains. For common analyses, the maximum size of the elements that can be used is often be determined by experience. However, to verify the quality of a solution, analyses with several levels of mesh refinement should be performed to ensure that the solution has converged. In recent years, the finite element method has been used to calculate the resistance of structures, and in particular that of composite structures. A number of techniques such as cohesive zone modeling, the virtual crack closure technique, and continuum damage modeling have emerged that can be used to predict cracking, delaminations, fiber failure, and other composite damage modes that lead to structural collapse. However, damage models present mesh refinement requirements that are not well understood. In this presentation, we examine different mesh refinement issues related to the representation of damage in composite materials. Damage process zone sizes and their corresponding mesh requirements will be discussed. The difficulties of modeling discontinuities and the associated need for regularization techniques will be illustrated, and some unexpected element size constraints will be presented. Finally, some of the difficulties in constructing models of composite structures capable of predicting transverse matrix cracking will be discussed. It will be shown that to predict the initiation and propagation of transverse matrix cracks, their density, and their saturation may require models that are significantly more refined than those that have been contemplated in the past.

Davila, Carlos G.↗