Search NASA⌕ Search

SEARCH · Search NASA

Results for “view factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55

SIMULATIONS OF GAMMA-RAY BURST JETS IN A STRATIFIED EXTERNAL MEDIUM: DYNAMICS, AFTERGLOW LIGHT CURVES, JET BREAKS, AND RADIO CALORIMETRY

The dynamics of gamma-ray burst (GRB) jets during the afterglow phase is most reliably and accurately modeled using hydrodynamic simulations. All published simulations so far, however, have considered only a uniform external medium, while a stratified external medium is expected around long duration GRB progenitors. Here, we present simulations of the dynamics of GRB jets and the resulting afterglow emission for both uniform and stratified external media with {rho}{sub ext}{proportional_to}r{sup -k} for k = 0, 1, 2. The simulations are performed in two dimensions using the special relativistic version of the Mezcal code. Common to all calculations is the initiation of the GRB jet as a conical wedge of half-opening angle {theta}{sub 0} = 0.2 whose radial profile is taken from the self-similar Blandford-McKee solution. The dynamics for stratified external media (k = 1, 2) are broadly similar to those derived for expansion into a uniform external medium (k = 0). The jet half-opening angle is observed to start increasing logarithmically with time (or radius) once the Lorentz factor {Gamma} drops below {theta}{sup -1}{sub 0}. For larger k values, however, the lateral expansion is faster at early times (when {Gamma} > {theta}{sup -1}{sub 0}) and slower at late times with the jet expansion becoming Newtonian and slowly approaching spherical symmetry over progressively longer timescales. We find that, contrary to analytic expectations, there is a reasonably sharp jet break in the light curve for k = 2 (a wind-like external medium), although the shape of the break is affected more by the viewing angle (for {theta}{sub obs} {<=} {theta}{sub 0}) than by the slope of the external density profile (for 0 {<=} k {<=} 2). Steeper density profiles (i.e., increasing k values) are found to produce more gradual jet breaks while larger viewing angles cause smoother and later appearing jet breaks. The counterjet becomes visible as it becomes sub-relativistic, and for k = 0 this results in a clear bump-like feature in the light curve. However, for larger k values the jet decelerates more gradually, causing only a mild flattening in the radio light curve that might be hard to discern when k = 2. Late-time radio calorimetry, which makes use of a spherical flow approximation near the non-relativistic transition, is likely to consistently overestimate the true energy by up to a factor of a few for k = 2, but likely to either overpredict or underpredict it by a smaller factor for k = 0, 1.

79 ASTRONOMY AND ASTROPHYSICS↗

P25 niblet-like coated on large void space TiO{sub 2} nanotubes arrays for high-rate charge-collection and improved photoconversion efficiency

A niblet-like P25-coated large void space TiO{sub 2} nanotubes arrays (PCTs) has been synthesized by decorating P25 nanoparticles on a rapidly-synthesized large void space TiO{sub 2} nanotube arrays (LTAs) with an appropriate hydrothermal treatment approach in a Teflon-lined stainless steel autoclave. Some key factors and probable synthetic mechanisms have been investigated to obtain an optimal route. Exhilaratingly, the as-synthesized PCTs and LTAs show impressive morphologies, structures and very large void space. And the most important is that, compared with LTAs, the decorated PCTs demonstrates significantly improved dye loading and high-rate charge-collection capability and thus leads to a more than double of the solar cell efficiency than that of LTAs (from 1.46% of LTAs to 3.00% of PCTs under simulated AM 1.5 conditions in our case). - Graphical abstract: The top view and cross-section SEM images of obtained electrode materials (LTAs and PCTs), with the schematic diagram (on the right) showing the kinetic advantages of the PCTs in charge collection and transmission. Highlights: Black-Right-Pointing-Pointer A large void space TiO{sub 2} nanotubes arrays (LTAs) was fabricated in not more than 12 h. Black-Right-Pointing-Pointer A niblet-like P25-coated void space TiO{sub 2} nanotubes arrays (PCTs) has been synthesized based on the LTAs. Black-Right-Pointing-Pointer Some key factors, probable synthetic mechanisms and optimal synthetic route are investigated. Black-Right-Pointing-Pointer The PCTs and LTAs show impressive morphologies, structures and greatly improved dye loading capability. Black-Right-Pointing-Pointer The PCTs shows enhanced charge-collection and light scattering properties and double solar cell efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of light scattering by two-dimensional inhomogeneities in paper using general radiative transfer theory

Lateral light scattering simulations of printed dots are analyzed using general radiative transfer theory. We investigated the appearance of a printed paper in relation to the medium parameters like thickness of the paper sample, its optical properties, and the asymmetry factor. It was found that the appearance of a print greatly depends on these factors making it either brighter or darker. A thicker substrate with higher single scattering albedo backed with an absorbing surface makes the dots brighter due to increased number of scattering events. Additionally, it is shown that the optical effects of print also depend on illuminating and viewing angles along with the depth of ink penetration. A larger single scattering angle implies less intensity and the dots appear much blurred due to the shadowing effect prominent when viewed from sides. A fully penetrated dot of the same extinction coefficient as a partial penetrated one is darker due to increased absorption. These results can be used in applications dealing with lateral light scattering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ANGULAR MOMENTUM TRANSPORT BY ACOUSTIC MODES GENERATED IN THE BOUNDARY LAYER. II. MAGNETOHYDRODYNAMIC SIMULATIONS

We perform global unstratified three-dimensional magnetohydrodynamic simulations of an astrophysical boundary layer (BL)-an interface region between an accretion disk and a weakly magnetized accreting object such as a white dwarf-with the goal of understanding the effects of magnetic field on the BL. We use cylindrical coordinates with an isothermal equation of state and investigate a number of initial field geometries including toroidal, vertical, and vertical with zero net flux. Our initial setup consists of a Keplerian disk attached to a non-rotating star. In a previous work, we found that in hydrodynamical simulations, sound waves excited by shear in the BL were able to efficiently transport angular momentum and drive mass accretion onto the star. Here we confirm that in MHD simulations, waves serve as an efficient means of angular momentum transport in the vicinity of the BL, despite the magnetorotational instability (MRI) operating in the disk. In particular, the angular momentum current due to waves is at times larger than the angular momentum current due to MRI. Our results suggest that angular momentum transport in the BL and its vicinity is a global phenomenon occurring through dissipation of waves and shocks. This point of view is quite different from the standard picture of transport by a local anomalous turbulent viscosity. In addition to angular momentum transport, we also study magnetic field amplification within the BL. We find that the field is indeed amplified in the BL, but only by a factor of a few, and remains subthermal.

79 ASTRONOMY AND ASTROPHYSICS↗

High-temperature superconductivity in two-band materials with interband pairing

The Eliashberg theory generalized using peculiar properties of two-band electron–phonon (EP) systems is employed for studying T{sub c} in two-band materials (in particular, pnictides). In view of probably strong EP coupling, we take into account pairing within the entire width of the electron band, not only in a narrow layer at the Fermi surface. It is found that the effect of pairing of electrons belonging to different bands is a decisive factor for manifestation of the effect of high T{sub c} in these materials. It is shown that in materials analogous to pnictides, high T{sub c} values are reproduced by the two-band spectral function of electron–phonon interaction. The existence of one more family of two-band high-temperature materials with a superconducting transition temperature T{sub c} comparable to that in cuprates is predicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fundamental and practical limits of planar tracking solar concentrators

Planar microtracking provides an alternate paradigm for solar concentration that offers the possibility of realizing high-efficiency embedded concentrating photovoltaic systems in the form factor of standard photovoltaic panels. Here, we investigate the thermodynamic limit of planar tracking optical concentrators and establish that they can, in principal, achieve the sine limit of their orientationally-tracked counterparts provided that the receiver translates a minimum distance set by the field of view half-angle. We develop a phase space methodology to optimize practical planar tracking concentrators and apply it to the design of a two surface, catadioptric system that operates with > 90% optical efficiency over a 140° field of view at geometric gains exceeding 1000×. These results provide a reference point for subsequent developments in the field and indicate that planar microtracking can achieve the high optical concentration ratio required in commercial concentrating photovoltaic systems.

47 OTHER INSTRUMENTATION↗

Radiation-induced aging of PDMS Elastomer TR-55: a summary of constitutive, mesoscale, and population-based models

Filled and cross-linked elastomeric rubbers are versatile network materials with a multitude of applications ranging from artificial organs and biomedical devices to cushions, coatings, adhesives, interconnects, and seismic-isolation-, thermal-, and electrical barriers. External factors like mechanical stress, temperature fluctuations, or radiation are known to create chemical changes in such materials that can directly affect the molecular weight distribution (MWD) of the polymer between cross-links and alter the structural and mechanical properties. From a Materials Science point of view it is highly desirable to understand, effect, and manipulate such property changes in a controlled manner. In this report we summarize our modeling efforts on a polysiloxane elastomer TR-55, which is an important component in several of our systems, and representative of a wide class of filled rubber materials. The primary aging driver in this work has been γ-radiation, and a variety of modeling approaches have been employed, including constitutive, mesoscale, and population-based models. The work utilizes diverse experimental data, including mechanical stress-strain and compression set measurements, as well as MWD measurements using multiquantum NMR.

36 MATERIALS SCIENCE↗

Potential Signature of Population III Pair-instability Supernova Ejecta in the BLR Gas of the Most Distant Quasar at z = 7.54*

The search for Population III stars has fascinated and eluded astrophysicists for decades. One promising place for capturing evidence of their presence must be high-redshift objects; signatures should be recorded in their characteristic chemical abundances. We deduce the Fe and Mg abundances of the broadline region (BLR) from the intensities of ultraviolet Mg ii and Fe ii emission lines in the near-infrared spectrum of UKIDSS Large Area Survey (ULAS) J1342+0928 at z = 7.54, by advancing our novel flux-to-abundance conversion method developed for quasars up to z ~ 3. We find that the BLR of this quasar is extremely enriched, by a factor of 20 relative to the solar Fe abundance, together with a very low Mg/Fe abundance ratio: [Fe/H] = +1.36 ± 0.19 and [Mg/Fe] =-1.11 ± 0.12, only 700 million years after the Big Bang. We conclude that such an unusual abundance feature cannot be explained by the standard view of chemical evolution that considers only the contributions from canonical supernovae. While there remains uncertainty in the high-mass end of the Population III initial mass function, here we propose that the larger amount of iron in ULAS J1342+0928 was supplied by a pair-instability supernova (PISN) caused by the explosion of a massive Population III star in the high-mass end of the possible range of 150–300 M ⊙ . Chemical evolution models based on initial PISN enrichment well explain the trend in [Mg/Fe]-z all the way from z < 3 to z = 7.54. We predict that stars with very low [Mg/Fe] at all metallicities are hidden in the galaxy, and they will be efficiently discovered by ongoing new-generation photometric surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Validation of Earth Radiation Budget Experiment scanning radiometer data inversion procedures

Validation techniques were implemented in the inversion of scanner radiometer data to assess the accuracy of the top of atmosphere radiant fluxes. An evaluation of SW radiant flux standard deviations for the same scene type shows that they contribute about 6.0 W/sq m for viewing zenith angles less than 55 deg and can reach values of up to 17.6 W/sq m for larger zenith angles in the backward scanning position. Three-channel intercomparison results, presented as color graphic displays and histograms, effectively validate the radiance measurements and the spectral factors. Along-track data were used to validate limb-darkening models and showed good agreement with current ERBE models. These validation techniques were found to be very effective in assessing the quality of the radiant fluxes generated by the ERBE inversion algorithm.

Manalo, Natividad D.↗

The Merging of Fatigue and Fracture Mechanics Concepts: A Historical Perspective

The seventh Jerry L. Swedlow Memorial Lecture presents a review of some of the technical developments, that have occurred during the past 40 years, which have led to the merger of fatigue and fracture mechanics concepts. This review is made from the viewpoint of 'crack propagation.' As methods to observe the 'fatigue' process have improved, the formation of fatigue micro-cracks have been observed earlier in life and the measured crack sizes have become smaller. These observations suggest that fatigue damage can now be characterized by 'crack size.' In parallel, the crack-growth analysis methods, using stress-intensity factors, have also improved. But the effects of material inhomogeneities, crack-fracture mechanisms, and nonlinear behavior must now be included in these analyses. The discovery of crack-closure mechanisms, such as plasticity, roughness, and oxide/corrosion/fretting product debris, and the use of the effective stress-intensity factor range, has provided an engineering tool to predict small- and large-crack-growth rate behavior under service loading, conditions. These mechanisms have also provided a rationale for developing, new, damage-tolerant materials. This review suggests that small-crack growth behavior should be viewed as typical behavior, whereas large-crack threshold behavior should be viewed as the anomaly. Small-crack theory has unified 'fatigue' and 'fracture mechanics' concepts; and has bridged the cap between safe-life and durability/damage-tolerance design concepts.

Newman, James C., Jr.↗

Aviation System Safety and Pilot Risk Perception: Implications for Enhancing Decision-Making Skills

This research explores risk perception in a defined population of flight instructors and the implications of these views for flight training. Flight instructors and students engaged in collegiate aviation flight training were interviewed for this qualitative study. Thirty-three percent of the instructors interviewed reported that flying is not a risky activity. This is important because research identifies risk perception as one factor influencing instructional choices. These choices can then impact the subsequent decision-making processes of flight students. Facilitating pilot decision-making through the use of an appropriate type of learning that incorporates the modeling of consensually validated cognitive procedures and risk management processes is discussed.

Green, Mavis F.↗

jasonSWIR Calibration of Spectralon Reflectance Factor

Satellite instruments operating in the reflective solar wavelength region require accurate and precise determination of the Bidirectional Reflectance Factor (BRF) of laboratory-based diffusers used in their pre-flight and on-orbit radiometric calibrations. BRF measurements are required throughout the reflected-solar spectrum from the ultraviolet through the shortwave infrared. Spectralon diffusers are commonly used as a reflectance standard for bidirectional and hemispherical geometries. The Diffuser Calibration Laboratory (DCaL) at NASA's Goddard Space Flight Center is a secondary calibration facility with reflectance measurements traceable to those made by the Spectral Tri-function Automated Reference Reflectometer (STARR) facility at the National Institute of Standards and Technology (NIST). For more than two decades, the DCaL has provided numerous NASA projects with BRF data in the ultraviolet (UV), visible (VIS) and the Near infraRed (NIR) spectral regions. Presented in this paper are measurements of BRF from 1475nm to 1625nm obtained using an indium gallium arsenide detector and a tunable coherent light source. The sample was a 2 inch diameter, 99% white Spectralon target. The BRF results are discussed and compared to empirically generated data from a model based on NIST certified values of 6deg directional/hemispherical spectral reflectance factors from 900nm to 2500nm. Employing a new NIST capability for measuring bidirectional reflectance using a cooled, extended InGaAs detector, BRF calibration measurements of the same sample were also made using NIST's STARR from 1475nm to 1625nm at an incident angle of 0deg and at viewing angles of 40deg, 45deg, and 50deg. The total combined uncertainty for BRF in this ShortWave Infrared (SWIR) range is less than 1%. This measurement capability will evolve into a BRF calibration service in SWIR region in support of NASA remote sensing missions. Keywords: BRF, BRDF, Calibration, Spectralon, Reflectance, Remote Sensing.

Georgiev, Georgi T.↗

Fracture of Carbon Nanotube - Amorphous Carbon Composites: Molecular Modeling

Carbon nanotubes (CNTs) are promising candidates for use as reinforcements in next generation structural composite materials because of their extremely high specific stiffness and strength. They cannot, however, be viewed as simple replacements for carbon fibers because there are key differences between these materials in areas such as handling, processing, and matrix design. It is impossible to know for certain that CNT composites will represent a significant advance over carbon fiber composites before these various factors have been optimized, which is an extremely costly and time intensive process. This work attempts to place an upper bound on CNT composite mechanical properties by performing molecular dynamics simulations on idealized model systems with a reactive forcefield that permits modeling of both elastic deformations and fracture. Amorphous carbon (AC) was chosen for the matrix material in this work because of its structural simplicity and physical compatibility with the CNT fillers. It is also much stiffer and stronger than typical engineering polymer matrices. Three different arrangements of CNTs in the simulation cell have been investigated: a single-wall nanotube (SWNT) array, a multi-wall nanotube (MWNT) array, and a SWNT bundle system. The SWNT and MWNT array systems are clearly idealizations, but the SWNT bundle system is a step closer to real systems in which individual tubes aggregate into large assemblies. The effect of chemical crosslinking on composite properties is modeled by adding bonds between the CNTs and AC. The balance between weakening the CNTs and improving fiber-matrix load transfer is explored by systematically varying the extent of crosslinking. It is, of course, impossible to capture the full range of deformation and fracture processes that occur in real materials with even the largest atomistic molecular dynamics simulations. With this limitation in mind, the simulation results reported here provide a plausible upper limit on achievable CNT composite properties and yield some insight on the influence of processing conditions on the mechanical properties of CNT composites.

Jensen, Benjamin D.↗

Space Research Project Management Can Benefit from Engineering Technology Selection Methods

Many engineering methods have been developed to help management select technology for a system design or further research. The simplest way to compare technologies is to use a checklist containing all the more or less important selection criteria, so that nothing is overlooked. The criteria usually include cost, safety, reliability and maintainability, and potential problems such as noise generation and microgravity sensitivity. The next step typically is to weight and score all the criteria. The process of weighting and scoring is helpful in bringing out different priorities and reaching a shared point of view. Group technology selection methods are designed to highlight initial disagreements and produce a shared consensus. Often a frank discussion led by management rather than decision analysts can be more effective. The final selection depends on management and engineering judgment and may include programmatic and organizational factors that are beyond the engineering checklist. The objective of engineering technology selection methods is to provide engineering information to assist management in making sound decisions. Project management and technology selection are assumed to use rational engineering analytic methods, but they often do not. The reason is that human insight, intuition, and “gut feel,” rather than logic, more frequently determine our decisions. Project selection and management are strongly influenced by nonrational psychological influences, which can produce unjustified confidence and determination. Nevertheless, there is a strong need for space projects to do rational project analysis and selection. Demonstrating a rational spirit is necessary for a scientific and technical organization. Professional ethics at its best requires an open, honest, and fair process, without damaging politics. Rational analysis can help improve good projects and avoid selecting bad ones. A sanity check using rational analysis guided by a checklist can help avoid egregious and damaging errors.

Jones, Harry W.↗

Evolving theories of change: Rethinking of the effects of office lighting on occupants

This paper proposes an overall theory of change that relates lighting in offices to a holistic view of human responses that contribute to the well-being of office workers. The theoretical model considers how variations in the four fundamental lighting attributes affect visual performance, visual environment, and non-image forming responses. It moves beyond these lighting to address how external factors that are may mediate the effects on the desired lighting related outcomes, which in turn determine the final impact on occupants. The model builds on prior conceptual models of lighting effects and informs design and research planning for office lighting. Ultimately, properly supported task performance can increase occupant motivation but by itself may not achieve the holistic desired impact. Lighting attributes that support a pleasant visual environment and appropriate non-image forming responses can more fully contribute to an occupant’s mood and overall well-being.

Collier, Jessica M.↗

Transition Form Factor from CLAS

The excitation of nucleon resonances in electromagnetic interaction has long been studied. The study of resonances helps us to understand the long- and short- range structures of the nucleon and its excited states in terms of quark confinement. While the existing data of the low-lying resonances are consistent with the well-studied SU(6) circle times operator O(3) constituent quark model classification, many open questions still remain. Exclusive electro-production is one of the best ways to investigate nucleon resonances. The exclusive electro-production process View the MathML source was measured in the photon virtuality range Q2 = 1.7 â 4.5 GeV2 and the invariant mass range for the n?+ system of W = 1.15 â 1.7 GeV using the CEBAF Large Acceptance Spectrometer. For the first time, these kinematics are probed in exclusive ?+ production from protons with nearly full coverage in the azimuthal and polar angles of the n?+ center-of-mass system. The n?+ channel has particular sensitivity t

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of optical digitizer selection on the application accuracy of a surgical localization system-a quantitative comparison between the OPTOTRAK and flashpoint tracking systems

Application accuracy is a crucial factor for stereotactic surgical localization systems, in which space digitization camera systems are one of the most critical components. In this study we compared the effect of the OPTOTRAK 3020 space digitization system and the FlashPoint Model 3000 and 5000 3D digitizer systems on the application accuracy for interactive localization of intracranial lesions. A phantom was mounted with several implantable frameless markers which were randomly distributed on its surface. The target point was digitized and the coordinates were recorded and compared with reference points. The differences from the reference points represented the deviation from the "true point." The root mean square (RMS) was calculated to show the differences, and a paired t-test was used to analyze the results. The results with the phantom showed that, for 1-mm sections of CT scans, the RMS was 0.76 +/- 0. 54 mm for the OPTOTRAK system, 1.23 +/- 0.53 mm for the FlashPoint Model 3000 3D digitizer system, and 1.00 +/- 0.42 mm for the FlashPoint Model 5000 system. These preliminary results showed that there is no significant difference between the three tracking systems, and, from the quality point of view, they can all be used for image-guided surgery procedures. Copyright 1999 Wiley-Liss, Inc.

Non-NASA Center↗

Long-distance contribution to {Delta}{Gamma}{sub s} of the B{sub s}-B{sub s} system

We estimate the long-distance contribution to the width difference of the B{sub s}-B{sub s} system, based mainly on two-body D{sub s}{sup (*)}D{sub s}{sup (*)} modes and three-body D{sub s}{sup (*)}D{sup (*)}K{sup (*)} modes (and their CP conjugates). Some higher cs resonances are also considered. The contribution to {Delta}{Gamma}{sub s}/{Gamma}{sub s} by two-body modes is (10.2{+-}3.0)%, slightly smaller than the short-distance result of (13.3{+-}3.2)%. The contribution to {Delta}{Gamma}{sub s}/{Gamma}{sub s} by D{sub s0}*(2317), D{sub s1}(2460), and D{sub s1}(2536) resonances is negligible. For the three-body D{sub s}{sup (*)}D{sup (*)}K{sup (*)} modes, we adopt the factorization formalism and model the form factors with off-shell D{sub s}{sup (*)} poles, the D{sub sJ}(2700) resonance, and nonresonant contributions. These three-body modes can arise through current-produced or transition diagrams, but only SU(3)-related D{sub u,d}{sup (*)}D{sup (*)}K modes from the current diagram have been measured so far. The pole model results for D{sub u,d}*D{sup (*)}K agree well with the data, while D{sub u,d}D{sup (*)}K rates agree with the data only within a factor of 2 to 3. All measured D{sub u,d}{sup (*)}D{sup (*)}K rates can be reproduced by including nonresonant contributions. The total {Delta}{Gamma}{sub s}/{Gamma}{sub s} obtained is (16.7{+-}8.5)%, which agrees with the short-distance result within uncertainties. For illustration, we also demonstrate the effect of D{sub sJ}(2700) in modes with D{sup (*)}K{sup *}. In all scenarios, the total {Delta}{Gamma}{sub s}/{Gamma}{sub s} remain consistent with the short-distance result. Our results indicate that (a) the operator product expansion in the short-distance picture is a valid assumption, (b) approximating the B{sub s}{yields}D{sub s}{sup (*)}D{sub s}{sup (*)} decays to saturate {Delta}{Gamma}{sub s} has a large correction, (c) the effect of three-body modes cannot be neglected, and (d) in addition to the D{sub s} and D{sub s}* poles, the D{sub sJ}(2700) resonance also plays an important role in three-body modes. Future experiments are necessary to improve the estimation of {Delta}{Gamma}{sub s} from the long-distance point of view.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗