Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Identifying factors controlling the selective ethane dehydrogenation on Pt-based catalysts from DFT based micro-kinetic modeling

Herein, a detailed EDH reaction mechanism on Pt(111), Pt(211), Pt 3 Sn(111) and Pt 3 Sn(211) surfaces has been systematically computed with DFT. A mean-field micro-kinetic model has been established to simulate the product distribution and selectivity on each surface at experimentally relevant conditions. We have uncovered a number of different factors controlling the catalytic performance of Pt-based EDH catalysts, thus leading to a better understanding of experimentally detected phenomenon. In this study, the (111) and (211) model surfaces of Pt and Pt 3 Sn catalysts were chosen to represent the terrace and step-edge sites when simulating the EDH reaction mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding effects of chemical complexity on helium bubble formation in Ni-based concentrated solid solution alloys based on elemental segregation measurements

Here, helium bubble formation and swelling were systematically studied in Ni-based concentrated solid solution alloys containing different numbers and types of elements. Our microscopy analysis showed that although increasing the alloy chemical complexity helps suppress bubble formation in general, there is no monotonic relationship between the bubble growth rate and the number of alloying elements. Certain elements (e.g., Fe and Pd) are more effective in suppressing bubble growth than others (e.g., Cr and Mn). Atom probe tomography was applied to accurately measure elemental segregation around bubbles, revealing unique effects of certain alloying elements on vacancy migration towards bubbles. More specifically, the high vacancy mobility via Cr sites leads to a large vacancy flux and an increased bubble size, while the high degree of atomic size mismatch introduced by Pd helps deflect vacancy flow away from bubbles and decrease the amount of swelling. The effects identified in this study provide new strategies to design concentrated solid solutions with superior resistance to swelling.

36 MATERIALS SCIENCE↗

Achieving Highly Reproducible Results in Graphite-based Li-ion Full Coin Cells

Electrode materials, cathodes or anodes, are mostly evaluated in half coin cells where lithium (Li) metal is used. However, due to the instability nature of Li metal, the cycling performances of the half cells is more likely reflecting Li anode stability instead of the coupled electrodes, questioning the conclusions. Full coin cells utilizing graphite as the anode effectively assesses materials. But the key factors of preparing full coin cells with reproducible performances have rarely been discussed and overlooked leading to many inconsistent results. This work discusses the scientific gap between cell preparation and observed electrochemical performances to unveil the key parameters for achieving consistent and reliable results in full coin cells, critical for effective evaluation of any new materials tested under relevant conditions. The knowledge from this work is broadly applicable in other full cells systems such as Si-based full cells or Na-ion batteries.

Hu, Jiangtao↗

Electrochemical state and internal variables estimation using a reduced-order physics-based model of a lithium-ion cell and an extended Kalman filter

This paper addresses the problem of estimating the present value of electrochemical internal variables in a lithium-ion cell in real time, using readily available measurements of cell voltage, current, and temperature. The variables that can be estimated include any desired set of reaction flux and solid and electrolyte potentials and concentrations at any set of one-dimensional spatial locations, in addition to more standard quantities such as state of charge. The method uses an extended Kalman filter along with a one-dimensional physics-based reduced-order model of cell dynamics. Simulations show excellent and robust predictions having dependable error bounds for most internal variables. (C) 2014 Elsevier B.V. All rights reserved.

Stetzel, KD↗

High thermoelectric performance of In, Yb, Ce multiple filled CoSb{sub 3} based skutterudite compounds

Filling voids with rare earth atoms is an effective way to lowering thermal conductivity which necessarily enhances thermoelectric properties of skutterudite compounds. Yb atom is one of the most effective species among the rare earth atoms for filling the voids in the skutterudite structure due to a large atomic mass, radius and it is intermediate valence state. In this work, we aim to find the best filling partners for Yb using different combinations of Ce and In as well as to optimize actual filling fraction in order to achieve high values of ZT. The traditional method of synthesis relying on melting-annealing and followed by spark plasma sintering was used to prepare all samples. The thermoelectric properties of four samples of Yb{sub 0.2}In{sub 0.2}Co{sub 4}Sb{sub 12}, Yb{sub 0.2}Ce{sub 0.15}Co{sub 4}Sb{sub 12}, Yb{sub 0.2}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12}, and Yb{sub 0.3}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12} (nominal) were examined based on the Seebeck coefficient, electrical conductivity, thermal conductivity, and Hall coefficient. Hall coefficient and Seebeck coefficient signs confirm that all samples are n-type skutterudite compounds. Carrier density increases with the increasing Yb+Ce content. A high power factor value of 57.7 {mu}W/K{sup 2}/cm for Yb{sub 0.2}Ce{sub 0.15}Co{sub 4}Sb{sub 12} and a lower thermal conductivity value of 2.82 W/m/K for Yb{sub 0.2}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12} indicate that small quantities of Ce with In may be a good partner to Yb to reduce the thermal conductivity further and thus enhance the thermoelectric performance of skutterudites. The highest ZT value of 1.43 was achieved for Yb{sub 0.2}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12} triple-filled skutterudite at 800 K. - Graphical abstract: Thermoelectric figure of merit of Yb{sub x}In{sub y}Ce{sub z}Co{sub 4}Sb{sub 12} (0{<=}x,y,z{<=}0.18 actual) compounds versus temperature. Highlights: Black-Right-Pointing-Pointer TE properties of Yb,In,Ce multiple-filled Yb{sub x}In{sub y}Ce{sub z}Co{sub 4}Sb{sub 12} skutterudites were investigated. Black-Right-Pointing-Pointer Thermal conductivity is strongly suppressed by multiple filling of Yb, Ce and In. Black-Right-Pointing-Pointer Small amounts of Ce and In with Yb are beneficial for the enhancement of TE performance. Black-Right-Pointing-Pointer The highest ZT=1.43 was achieved with Yb{sub 0.07}In{sub 0.094}Ce{sub 0.065}Co{sub 4}Sb{sub 11.92} at 800 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective fluorescence sensors for detection of nitroaniline and metal Ions based on ligand-based luminescent metal-organic frameworks

Metal-organic frameworks (MOFs) are porous crystalline materials with high potential for applications in fluorescence sensors. In this work, two solvent-induced Zn(II)–based metal-organic frameworks, Zn{sub 3}L{sub 3}(DMF){sub 2} (1) and Zn{sub 3}L{sub 3}(DMA){sub 2}(H{sub 2}O){sub 3} (2) (L=4,4′-stilbenedicarboxylic acid), were investigated as selective sensing materials for detection of nitroaromatic compounds and metal ions. The sensing experiments show that 1 and 2 both exhibit selective fluorescence quenching toward nitroaniline with a low detection limit. In addition, 1 exhibits high selectivity for detection of Fe{sup 3+} and Al{sup 3+} by significant fluorescence quenching or enhancement effect. While for 2, it only exhibits significant fluorescence quenching effect for Fe{sup 3+}. The results indicate that 1 and 2 are both promising fluorescence sensors for detecting and recognizing nitroaniline and metal ions with high sensitivity and selectivity. - Graphical abstract: Two MOFs have been selected as the fluorescence sensing materials for selectively sensing mitroaromatic compounds and metal ions. The high selectivity makes them promising fluorescence sensors for detecting and recognizing nitroaniline and Fe{sup 3+} or Al{sup 3+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti2AlNb-based alloys

Highlights: • Ball milling tunes the morphology of primary O phase in Ti{sub 2}AlNb alloys. • The interface of Widmanstatten B2 and O affects the hardness of the alloys. • The entire precipitation process of Widmanstatten O phase is reported. - Abstract: Ti{sub 2}AlNb-based alloys, spark plasma sintered from ball-milled octahedral Ti-22Al-25Nb powder, are aged for 0–3 h in this study. Ball milling tunes the morphology of primary orthorhombic (O) phase to be columnar, and improves the mechanical properties of the alloys. The evolution of the Widmanstätten O phase, which brought main precipitation strengthening effect, is then investigated during the ageing process. The hardness of the alloys is improved by an increasing content of O phase and the reduced width of the Widmanstätten O phase; in addition, the length of Widmanstätten O phase also brings positive effect on the hardness, which indicates that the hardness is strongly coupled with the interface of the Widmanstätten O precipitates and B2 matrix. By means of transmission electron microscopy observation, the precipitation of O initials with an amorphous state, followed by a coherent interface between (110){sub B2} and (002){sub O}, which is destroyed to be semi-coherent and incoherent during the next ageing stage.

36 MATERIALS SCIENCE↗

Evolution of residual stress, free volume, and hardness in the laser shock peened Ti-based metallic glass

Laser shock peening (LSP) with different cycles was performed on the Ti-based bulk metallic glasses (BMGs). The sub-surface residual stress of the LSPed specimens was measured by high-energy X-ray diffraction (HEXRD) and the near-surface residual stress was measured by scanning electron microscope/focused ion beam (SEM/FIB) instrument. The sub-surface residual stress in the LSP impact direction (about-170MPa) is much lower than that perpendicular to the impact direction (about -350 MPa), exhibiting anisotropy. The depth of the compressive stress zone increases from 400 mu m to 500 mu m with increasing LSP cycles. The highest near-surface residual stress is about -750 MPa. LSP caused the free volume to increase and the maximum increase appeared after the first LSP process. Compared with the hardness (567 +/- 7 HV) of the as-cast BMG, the hardness (590 +/- 9 HV) on the shocked surface shows a hardening effect due to the hardening mechanism of compressive residual stress; and the hardness (420 +/- 9 HV) on the longitudinal section shows a softening effect due to the softening mechanism of free volume.

bulk metallic glasses↗

Linac-based extracranial radiosurgery with Elekta volumetric modulated arc therapy and an anatomy-based treatment planning system: Feasibility and initial experience

We reported our initial experience in using Elekta volumetric modulated arc therapy (VMAT) and an anatomy-based treatment planning system (TPS) for single high-dose radiosurgery (SRS-VMAT) of liver metastases. This study included a cohort of 12 patients treated with a 26-Gy single fraction. Single-arc VMAT plans were generated with Ergo++ TPS. The prescription isodose surface (IDS) was selected to fulfill the 2 following criteria: 95% of planning target volume (PTV) reached 100% of the prescription dose and 99% of PTV reached a minimum of 90% of prescription dose. A 1-mm multileaf collimator (MLC) block margin was added around the PTV. For a comparison of dose distributions with literature data, several conformity indexes (conformity index [CI], conformation number [CN], and gradient index [GI]) were calculated. Treatment efficiency and pretreatment dosimetric verification were assessed. Early clinical data were also reported. Our results reported that target and organ-at-risk objectives were met for all patients. Mean and maximum doses to PTVs were on average 112.9% and 121.5% of prescribed dose, respectively. A very high degree of dose conformity was obtained, with CI, CN, and GI average values equal to 1.29, 0.80, and 3.63, respectively. The beam-on-time was on average 9.3 minutes, i.e., 0.36 min/Gy. The mean number of monitor units was 3162, i.e., 121.6 MU/Gy. Pretreatment verification (3%-3 mm) showed an optimal agreement with calculated values; mean γ value was 0.27 and 98.2% of measured points resulted with γ < 1. With a median follow-up of 16 months complete response was observed in 12/14 (86%) lesions; partial response was observed in 2/14 (14%) lesions. No radiation-induced liver disease (RILD) was observed in any patients as well no duodenal ulceration or esophagitis or gastric hemorrhage. In conclusion, this analysis demonstrated the feasibility and the appropriateness of high-dose single-fraction SRS-VMAT in liver metastases performed with Elekta VMAT and Ergo++ TPS. Preliminary clinical outcomes showed a high rate of local control and minimum incidence of acute toxicity.

61 RADIATION PROTECTION AND DOSIMETRY↗

The Role of Partial Crystallinity on Hydrogen Permeation in Fe–Ni–B–Mo Based Metallic Glass Membranes

A potentially exciting material for membrane separations are metallic glass materials due to their low cost, high elastic toughness and resistance to hydrogen embrittlement as compared to crystalline Pd-based membrane systems. However, at elevated temperatures and extended operation times structural changes including partial crystallinity may appear in these amorphous metallic systems. This study reports on the investigation of time and temperature dependent crystalline phase formation in conjunction with in situ crystallization/hydrogen permeation experiments at elevated temperatures. At temperatures near 400 C a FeNi crystalline phase appears as 22 vol.% inside the host amorphous matrix and the resulting composite structure remains stable over 3 h at temperature. The hydrogen permeation at 400 C of the partially crystalline material is similar to the fully amorphous material near 5 x 10{sup -9} mol H{sub 2}/m s Pa{sup 1/2}, while ambient temperature electrochemical permeation at 25 C revealed an order of magnitude decrease in the permeation of partially crystalline materials due to differences in the amorphous versus crystalline phase activation energy for hydrogen permeation.

08 HYDROGEN↗

Silicon-based anodes for lithium-ion batteries: Effectiveness of materials synthesis and electrode preparation

Lithium-ion batteries are widely used throughout the world for portable electronic devices and mobile phones and show great potential for more demanding applications like electric vehicles. Unfortunately, lithium-ion batteries still lack the required level of energy storage to completely meet the demands of such applications as electric vehicles. Among advanced materials being studied, silicon nanoparticles have demonstrated great potential as an anode material to replace the commonly used graphite. Silicon has been shown to have a high theoretical gravimetric capacity, approximately 4200 mA h/g, compared to only 372 mA h/g for graphite. Though silicon nanoparticles have remarkably high capacity, they suffer from rapid degradation with each cycle due to electrode volume expansion of approximately 400% during lithiation, placing a large strain on the material. With each cycle that strain creates cracks in the electrode particles and causes them to break down into smaller particles, which create void spaces between the particles and lead to poor contact as reflected in poor conductivity. In this review, we discuss exciting new research on silicon-based anodes conducted during the past couple of years. Besides stressing the importance of well-designed nanostructures of Si, we focus on optimization of the Si electrode and resulting performance enhancement by properly selecting binders and synergistically integrating them with various carbon materials during electrode design and fabrication. Importantly, although each improvement strategy has its own advantage, appropriate combination of them will yield much higher anode performance. We summarize the core issues in developing the silicon anode and effective strategies in yielding more promising results. (C) 2016 Elsevier Ltd. All rights reserved.

Casimir, Anix↗