Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Defect identification based on first-principles calculations for deep level transient spectroscopy

Deep level transient spectroscopy (DLTS) is used extensively to study defects in semiconductors. We demonstrate that great care should be exercised in interpreting activation energies extracted from DLTS as ionization energies. We show how first-principles calculations of thermodynamic transition levels, temperature effects of ionization energies, and nonradiative capture coefficients can be used to accurately determine actual activation energies that can be directly compared with DLTS. Our analysis is illustrated with hybrid-functional calculations for two important defects in GaN, which have similar thermodynamic transition levels and shows that the activation energy extracted from DLTS includes a capture barrier that is temperature dependent, unique to each defect, and, in some cases, large in comparison to the ionization energy. By calculating quantities that can be directly compared with the experiment, first-principles calculations thus offer powerful leverage in identifying the microscopic origin of defects detected in DLTS.

Activation energies↗

Variational calculations for anisotropic solitons in dipolar Bose-Einstein condensates

We present variational calculations using a Gaussian trial function to calculate the ground state of the Gross-Pitaevskii equation (GPE) and to describe the dynamics of the quasi-two-dimensional solitons in dipolar Bose-Einstein condensates (BECs). Furthermore, we extend the ansatz to a linear superposition of Gaussians, improving the results for the ground state to exact agreement with numerical grid calculations using imaginary time and the split-operator method. We are able to give boundaries for the scattering length at which stable solitons may be observed in an experiment. By dynamic calculations with coupled Gaussians, we are able to describe the rather complex behavior of the thermally excited solitons. The discovery of dynamically stabilized solitons indicates the existence of such BECs at experimentally accessible temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct photon calculations in heavy-ion collisions at {radical}(s{sub NN})=62.4A to 200A GeV in a (3+1)-dimensional hybrid approach

Direct photon spectra from central Au + Au and Cu + Cu collisions at {radical}(s{sub NN})=62.4,130, and 200A GeV are calculated within the ultrarelativistic quantum molecular-dynamics microscopic transport model and a micro+macro hybrid model. In the latter approach, the high-density part of the transport evolution is replaced by an ideal (3+1)-dimensional hydrodynamic calculation. We study the impact of viscosity and full local thermalization and compare the calculations to measurements obtained by the PHENIX Collaboration. We find a reasonable agreement with the experimental data for calculations involving a quark-gluon-plasma phase.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Algorithms for calculation of the transport tensor components in the generalized first collision probability method

The first collision probability (FCP) method allows generalization by introducing several angular modes in each zone. Algorithms are proposed for calculating the components of the corresponding first collision tensor. These algorithms do not increase the computational complexity beyond that of the matrix calculation algorithm in the traditional FCP method and allow calculating a system described in terms of combinatorial geometry. Fourfold integrals are numerically taken in calculation of a three-dimensional system and twofold integrals are taken for two-dimensional geometry. The geometrical capabilities are ensured by using the standard geometrical module of the Monte Carlo method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Burnup calculation methodology in the serpent 2 Monte Carlo code

This paper presents two topics related to the burnup calculation capabilities in the Serpent 2 Monte Carlo code: advanced time-integration methods and improved memory management, accomplished by the use of different optimization modes. The development of the introduced methods is an important part of re-writing the Serpent source code, carried out for the purpose of extending the burnup calculation capabilities from 2D assembly-level calculations to large 3D reactor-scale problems. The progress is demonstrated by repeating a PWR test case, originally carried out in 2009 for the validation of the newly-implemented burnup calculation routines in Serpent 1. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Corrected calculation for the non-local solution to the g − 2 anomaly and novel results in non-local QED

We provide the corrected calculation of the (g − 2) μ in non-local QED previously done in the literature. In specific, we show the proper technique for calculating loops in non-local QED and use it to find the form factors F 1 (q 2 ) and F 2 (q 2 ) in non-local QED. We also utilize this technique to calculate some novel results in non-local QED, including calculating the correction to the photon self-energy, the modification to the classical Coulomb potential, the modification to the energy levels of the hydrogen atom, and the contribution to the Lamb shift. We also discuss charge dequantization through non-locality, and show that the experimental bounds on the electric charge on Dirac neutrinos, translate into strong flavor-dependent bounds on the scale on non-locality that range between 10 5 −10 10 TeV. We also discuss the inconsistencies of unrenormalized non-local Quantum Field Theories (QFTs) and the need for renormalizing them, even when they are free from UV divergences.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermodynamic properties of the Nd-Bi system via emf measurements, $\mathrm{DFT}$ calculations, machine learning, and $\mathrm{CALPHAD}$ modeling

Thermodynamic properties of the Nd-Bi system were investigated using a combination of experimental measurements, first-principles calculations based on density functional theory (DFT), data mining and machine learning (DM + ML) predictions, and calculation of phase diagrams (CALPHAD) modeling. The electromotive force (emf) of Nd-Bi alloys in molten LiCl-KCl-NdCl 3 at 773–973 K was measured via coulometric titration of Nd into Bi for the determination of thermochemical properties such as activity coefficients and solubilities of Nd in Bi. A new peritectic reaction of [liquid + NdBi 2 = Nd 3 Bi 7 ] at 774 K was confirmed using differential scanning calorimetry, structural (X-ray diffraction), and microstructural (scanning electron microscopy) analyses. The unknown crystal structure of NdBi2 was suggested to be a mixture of the anti-La 2 Sb configuration and the La 2 Te-type configuration based on ML predictions for over 26,000 data-mined AB 2 -type configurations together with DFT-based verifications. Using the newly acquired experimental data and DFT-based calculations, the thermodynamic description of the Nd-Bi system was remodeled, and a more complete Nd-Bi phase diagram was calculated, including the Nd 3 Bi 7 compound, invariant transition reactions, and liquidus temperatures.

36 MATERIALS SCIENCE↗

Calculation and evaluation of energy levels and radiative rates for 2s{sup 2}2p{sup 6}-2s2p{sup 6}np and 2s{sup 2}2p{sup 6}-2s{sup 2}2p{sup 5}nd(4{<=}n{<=}20) transitions in Cu XX

Energy levels, oscillator strengths, and radiative rates have been calculated for 2s{sup 2}2p{sup 6}-2s2p{sup 6}np and 2s{sup 2}2p{sup 6}-2s{sup 2}2p{sup 5}nd transitions with 4{<=}n{<=}20 in Cu XX ions. In the calculations, the Flexible Atomic Code has been used, and systematic analysis and evaluation of the accuracy of the calculated results for the two types of transitions are also given with different indicators. It is shown that the results for the transitions with a 2s hole are greatly improved by using the present method comparing to those from RELAC code. Furthermore, our results show that the energy levels of the 2s2p{sup 6}(n+1)l and 2s{sup 2}2p{sup 5}(n+2)l configurations closely interact with those of the 2s2p{sup 6}np series and it is essential to include the 2s{sup 2}2p{sup 5}(n+1)l configurations in the calculations for the 2s{sup 2}2p{sup 5}nd series.

74 ATOMIC AND MOLECULAR PHYSICS↗

Study of ion cluster reorientation process of geopolymerisation reaction using semi-empirical AM1 calculations

In this paper all the possible reaction pathways involved in ion clusters reorientation process of metakaolin based Geopolymeric cement were systemically investigated according to thermodynamic theory. The reaction energy of every possible reorientation pathway was also calculated using computational chemistry method-semi-empirical AM1 calculation. The optimum reorientation pathway was analyzed based on the energy-minimized principle. The calculation results showed that Si-Al hybrid reorientation should be primary reorientation pathway of Geopolymeric cement made with NaOH or KOH activated metakaolin. This viewpoint was also verified by Nuclear Magnetic Resonance Spectroscopy equipped with Magic Angle Spinning technique (MAS-NMR). In addition, the semi-empirical AM1 calculations revealed that the reorientation reaction is easier and stronger in NaOH solution than in KOH solution.

36 MATERIALS SCIENCE↗

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗

Comparison of Planned Dose Distributions Calculated by Monte Carlo and Ray-Trace Algorithms for the Treatment of Lung Tumors With CyberKnife: A Preliminary Study in 33 Patients

Purpose: To compare dose distributions calculated using the Monte Carlo algorithm (MC) and Ray-Trace algorithm (effective path length method, EPL) for CyberKnife treatments of lung tumors. Materials and Methods: An acceptable treatment plan is created using Multiplan 2.1 and MC dose calculation. Dose is prescribed to the isodose line encompassing 95% of the planning target volume (PTV) and this is the plan clinically delivered. For comparison, the Ray-Trace algorithm with heterogeneity correction (EPL) is used to recalculate the dose distribution for this plan using the same beams, beam directions, and monitor units (MUs). Results: The maximum doses calculated by the EPL to target PTV are uniformly larger than the MC plans by up to a factor of 1.63. Up to a factor of four larger maximum dose differences are observed for the critical structures in the chest. More beams traversing larger distances through low density lung are associated with larger differences, consistent with the fact that the EPL overestimates doses in low-density structures and this effect is more pronounced as collimator size decreases. Conclusions: We establish that changing the treatment plan calculation algorithm from EPL to MC can produce large differences in target and critical organs' dose coverage. The observed discrepancies are larger for plans using smaller collimator sizes and have strong dependency on the anatomical relationship of target-critical structures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evaluation of electronic state of Cs-adsorbed clay minerals by NEXAFS analysis using DFT calculations

In this work, a combined analytical method of NEXAFS measurement and DFT-calculation was employed for the evaluation of Cs states in clay minerals. The measured Cs M 4,5 NEXAFS spectra of Cs halides were analyzed using the DFT-calculations in order to establish the analytical methods. The NEXAFS spectra of the Cs halides were well reproduced by incorporating the core-hole strength. The Cs M 4,5 NEXAFS spectrum of the clay minerals was well reproduced by the DFT-calculations including the major transitions and tail structures with the established method. Further evaluation of this spectrum by charge density analysis suggested that these major transitions and the tail structures likely reflect the bonding state and the local environment around the Cs atoms. Comparison of electronic states of Cs in the clay mineral with those in the Cs halides by DFT-calculations has shown that the interaction between Cs and the nearest-neighbor atom is largest in the clay mineral, which differs from those of Cs halides. This happened due to the energy level of Cs-5s and 5p, which was closer to that of O-2s and 2p than the s and p orbitals of other alkali metal and alkali earth metal elements.

36 MATERIALS SCIENCE↗

Dicarboxylate assisted synthesis of the monoclinic heterometallic tetrathiocyanato bridged copper(II) and mercury(II) coordination polymer {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n}: Synthesis, structural, vibration, luminescence, EPR studies and DFT calculations

The synthesis of the monoclinic polymorph of {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} is reported. The compound, as determined by X-ray diffraction of a twinned crystal, consists of mercury and copper atoms linked by {mu}{sub 1,3}-SCN bridges. The crystal packing shows a highly porous infinite 3D structure. Diagnostic resonances for the SCN{sup -} ligand and metal-ligand bonds in the IR, far-IR and Raman spectra are assigned and discussed. The electronic band structure along with density of states (DOS) calculated by the DFT method indicates that the compound is an indirect band gap semiconductor. The DFT calculations show that the observed luminescence of the compound arises mainly from an excited LLCT state with small MLCT contributions (from the copper to unoccupied {pi}{sup *} orbital of the thiocyanate groups). The X-band EPR spectrum of the powdered sample at room temperature reveals an axial signal with anisotropic g factors consistent with the unpaired electron of Cu(II) ion in the d{sub x}{sup 2}{sub -y}{sup 2} orbital. -- Graphical abstract: Synthesis and X-ray structure determination of the monoclinic {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} is reported. The IR, far-IR, Raman, photoluminescence as well as EPR spectra of the compound is discussed. Also, the emission and semiconducting behavior of the compound is illustrated through the density functional theory calculation of electronic band structure along with density of states. Display Omitted Research highlights: > The monoclinic {l_brace}Cu[Hg(SCN){sub 4}]{r_brace}{sub n} has been prepared. > The structure of the compound is determined by XRD of a twinned crystal. > The IR, far-IR, Raman, EPR and emission spectra of the compound is investigated. > As shown by DFT calculations, the emission bands of the compound are mainly LLCT. > Small MLCT from the copper to the thiocyanate groups contributes to these bands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, optoelectronic, infrared and Raman spectra of orthorhombic SrSnO{sub 3} from DFT calculations

Orthorhombic SrSnO{sub 3} was investigated using density functional theory (DFT) considering both the local density and generalized gradient approximations, LDA and GGA, respectively. The electronic band structure, density of states, complex dielectric function, optical absorption, and the infrared and Raman spectra were computed. Calculated lattice parameters are close to the experimental measurements, and an indirect band gap E(S{yields}{Gamma})=1.97eV (2.27 eV) was obtained within the GGA (LDA) level of calculation. Effective masses for holes and electrons were estimated, being very anisotropic in comparison with similar results for orthorhombic CaSnO{sub 3}. The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be sensitive to the plane of polarization of the incident light. The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum of orthorhombic SrSnO{sub 3} was achieved. -- Graphical abstract: Orthorhombic SrSnO{sub 3}: a view of the unit cell (left) and plots showing the calculated and experimental Raman spectra (right). Display Omitted Research highlights: {yields} We have performed DFT calculations on orthorhombic SrSnO{sub 3} crystals, obtaining their structural, electronical and optical properties. {yields} An indirect band gap was obtained, and anisotropic effective masses were found for both electrons and holes. {yields} The complex dielectric function and the optical absorption of SrSnO{sub 3} were shown to be very sensitive to the plane of polarization of the incident light. {yields} The infrared spectrum between 100 and 600 cm{sup -1} was obtained, with its main peaks being assigned, and a nice agreement between experimental and theoretical peaks of the Raman spectrum was achieved.

36 MATERIALS SCIENCE↗

Experimental and calculated infrared spectra of disubstituted naphthoquinones

In recent years there has been interest in incorporating substituted 1,4-naphthoquinones (NQs) into the A 1 binding site in photosystem I (PSI) photosynthetic protein complexes. This interest in part stems from the considerably altered bioenergetics of electron transfer that occur in PSI with such substitutions. Time resolved FTIR studies of PSI complexes with disubstituted NQs incorporated have and currently are being undertaken, and with this in mind it is worth considering FTIR absorption spectra of these disubstituted NQs in solution. Here we present FTIR absorbance spectra for 2-bromo-3-methyl-1,4-naphthoquinone (BrMeNQ), 2-chloromethyl-3-methyl-1,4-naphthoquinone (CMMeNQ) and 2-ethylthio-3-methyl-1,4-naphthoquinone (ETMeNQ) in tetrahydrofuran (THF). The FTIR spectra of these di-substituted naphthoquinones (NQs) were compared to FTIR spectra of 2-methyl-3-phytyl-1,4-naphthoquinone [phylloquinone (PhQ)], 2,3-dimethyl-1,4-naphthoquinone (DMNQ), and 2-methyl-1,4-naphthoquinone (2MNQ). To aid in the assignment of bands in the experimental spectra, density functional theory (DFT) based vibrational frequency calculations for all the substituted NQs in solution were undertaken. The calculated and experimental spectra agree well. By calculating normal mode potential energy distributions, unambiguous quantitative band assignments were made. The calculated and experimental spectra together make predictions about what may be observable in time resolved FTIR difference spectra obtained using PSI with the different NQs incorporated. As a result, time resolved FTIR difference spectra are presented that support these predictions.

59 BASIC BIOLOGICAL SCIENCES↗

Electron–Nucleus Hyperfine Coupling Calculated from Restricted Active Space Wavefunctions and an Exact Two-Component Hamiltonian

Exact two-component (X2C) relativistic nuclear hyperfine magnetic field operators were incorporated in X2C ab-initio wavefunction calculations at the multi-reference restricted active space (RAS) level for calculations of nuclear hyperfine magnetic properties. Spin-orbit coupling was treated via RAS state interaction (SO-RASSI). The method was tested by calculations of electron – nucleus hyperfine coupling constants. The approach, implemented in the OpenMolcas program, overcomes a major limitation of a previous SO-RASSI implementation for hyperfine coupling that relied on non-relativistic hyperfine operators [J. Chem. Theor. Comput. 2015, 11, 538–549] and therefore had only limited applicability. Furthermore, results from calculations on systems with light and heavy main group elements, transition metals, lanthanides, and one actinide complex, demonstrate reasonably good agreement with experimental data, where available, as long as the active space can generate sufficient spin polarization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calculated Ionization Potentials of MO 3 and MO 2 for M = U, Mo, W, and Nd

Here, ionization potentials (IPs) for MO 3 and MO 2 for M = U, Mo, W, and Nd have been predicted using the Feller–Peterson–Dixon (FPD) approach at the coupled cluster CCSD(T)/complete basis set level including additional corrections. The additional corrections are mostly small, with spin-orbit effects contributing less than 0.05 eV, except for NdO 2 where the correction lowers the IP by 0.26 eV. The IPs for UO 3 and UO 2 are calculated to be 9.59 and 6.09 eV, respectively. The calculated IPs for MoO 3 and WO 3 are very similar, 11.13 and 11.11 eV, respectively, and MoO 2 and WO 2 are 8.51 and 8.79 eV, respectively. MoO 2 has a triplet ground state, whereas WO 2 has a singlet ground state. The calculated IP for NdO 2 is 7.90 eV. NdO 3 does not achieve a high +VI formal oxidation state on the lanthanide and has an IP of 7.80 eV. These calculated IPs are expected to have error bars of ±0.04 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Advances toward Efficient Calculation of Higher Nuclear Derivatives in Quantum Chemistry

In this article, we provide an overview of state-of-the-art techniques that are being developed for efficient calculation of second and higher nuclear derivatives of quantum mechanical (QM) energy. Calculations of nuclear Hessians and anharmonic terms incur high costs and memory and scale poorly with system size. Three emerging classes of methods—machine learning (ML), automatic differentiation (AD), and matrix completion (MC)—have demonstrated promise in overcoming these challenges. We illustrate studies that employ unsupervised ML methods to reduce the need for multiple Hessian calculations in dynamics simulations and those that utilize supervised ML to construct approximate potential energy surfaces and estimate Hessians and anharmonic terms at reduced cost. By extension, if electronic structure operations could be written in a manner similar to functions underlying ML methods, rapid differentiation or AD routines can be employed to inexpensively calculate higher arbitrary-order derivatives. While ML approaches are typically black-box, we describe methods such as compressed sensing (CS) and MC, which explicitly leverage problem-specific mathematical properties of higher derivatives such as sparsity and low-rank, to complete higher derivative information using only a small, incomplete sample. The three classes of methods facilitate reliable predictions of observables ranging from infrared spectra to thermal conductivity and constitute a promising way forward in accurately capturing otherwise intractable higher-order responses of QM energy to nuclear perturbations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗