SEARCH · Search NASA

Results for “CONTROL ELEMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

All sources NASA NTRS DOE OSTI

NASA NTRS1988

A high fidelity real-time simulation of a small turboshaft engine

A high-fidelity component-type model and real-time digital simulation of the General Electric T700-GE-700 turboshaft engine were developed for use with current generation real-time blade-element rotor helicopter simulations. A control system model based on the specification fuel control system used in the UH-60A Black Hawk helicopter is also presented. The modeling assumptions and real-time digital implementation methods particular to the simulation of small turboshaft engines are described. The validity of the simulation is demonstrated by comparison with analysis-oriented simulations developed by the manufacturer, available test data, and flight-test time histories.

Ballin, Mark G.↗

NASA NTRS1987

Computing architecture for telerobots in earth orbit

Based on generic operational and computational requirements associated with the control of telerobots in earth orbit, a multibus-based distributed but integrated computing architecture is proposed. An experimental system of that kind under development at the Jet Propulsion Laboratory (JPL) is briefly described. It uses Intel Multibus I at both control station and remote robot (telerobot) computing nodes. An essential element within each multibus is a Unified (or Universal) Computer Control Subsystem (UCCS) for telerobot and control station motor components. The two multibus-based computing nodes can be linked by parallel or high speed serial links for real-time data transmission and for closing the real-time bilateral (force-reflecting) control loop between telerobot and control station. The experimental system is briefly commented, followed by a brief discussion of future development plans and possibilities.

Bejczy, A. K.↗

NASA NTRS1988

Fire behavior and risk analysis in spacecraft

Practical risk management for present and future spacecraft, including space stations, involves the optimization of residual risks balanced by the spacecraft operational, technological, and economic limitations. Spacecraft fire safety is approached through three strategies, in order of risk: (1) control of fire-causing elements, through exclusion of flammable materials for example; (2) response to incipient fires through detection and alarm; and (3) recovery of normal conditions through extinguishment and cleanup. Present understanding of combustion in low gravity is that, compared to normal gravity behavior, fire hazards may be reduced by the absence of buoyant gas flows yet at the same time increased by ventilation flows and hot particle expulsion. This paper discusses the application of low-gravity combustion knowledge and appropriate aircraft analogies to fire detection, fire fighting, and fire-safety decisions for eventual fire-risk management and optimization in spacecraft.

Friedman, Robert↗

NASA NTRS1990

An LQR controller design approach for a Large Gap Magnetic Suspension System (LGMSS)

Two control approaches for a Large Gap Magnetic Suspension System (LGMSS) are investigated and numerical results are presented. The approaches are based on Linear Quadratic Regulator (LQR) control theory and include a nonzero set point regulator with constant disturbance input and an integral feedback regulator. The LGMSS provides five degree of freedom control of a cylindrical suspended element which is composed of permanent magnet material. The magnetic actuators are air core electromagnets mounted in a planar way.

Groom, Nelson J.↗

NASA NTRS1989

The telerobot workstation testbed for the shuttle aft flight deck: A project plan for integrating human factors into system design

The human factors design process in developing a shuttle orbiter aft flight deck workstation testbed is described. In developing an operator workstation to control various laboratory telerobots, strong elements of human factors engineering and ergonomics are integrated into the design process. The integration of human factors is performed by incorporating user feedback at key stages in the project life-cycle. An operator centered design approach helps insure the system users are working with the system designer in the design and operation of the system. The design methodology is presented along with the results of the design and the solutions regarding human factors design principles.

Sauerwein, Timothy↗

NASA NTRS1991

Project WISH: The Emerald City, phase 2

The purpose of the Permanently Manned Autonomous Space Oasis, designated Project WISH: The Emerald City, is to serve as permanent living quarters for space colonists. In addition, it will serve as a stopover for space missions and will be capable of restationing itself practically anywhere within the solar system to provide support for these missions. The station should be self-sufficient, with no specific dependence on any resources from Earth. The 1990 to 1991 design team continued work started by last year's class. Further studies were conducted in the areas of orbital mechanics, propulsion, attitude control, and human factors. Critical elements were identified in each of these areas, and guidelines were established for the design of the Emerald City. Using the knowledge gained from these studies, two particular missions of interest, a Saturn Envelope mission and an Earth to Mars mission, were examined. The size and mass estimates, along with the methodologies used in their determination, are considered to be the main accomplishments of phase 2.

Source record↗

NASA NTRS1991

Multidisciplinary modeling and simulation of a generic hypersonic vehicle

The modeling and simulation of hypersonic vehicles which involve the interaction of a number of major technical disciplines including aerodynamics, structures, heat transfer, propulsion, and control engineering are described. Finite element numerical formulations of individual disciplines including their appropriate integration for multidisciplinary simulation are presented. An efficient unstructured grid generation strategy, evolved by modifying an existing code, is developed.

Gupta, K. K.↗

NASA NTRS1992

Heliosphere Instrument for Spectra, Composition and Anisotropy at Low Energies

The Heliosphere Instrument for Spectra, Composition, and Anisotropy at Low Energies (HI-SCALE) is designed to make measurements of interplanetary ions and electrons throughout the entire Ulysses mission. The ions (E(i) greater than about 50 keV) and electrons (E(e) greater than about 30 keV) are identified uniquely and detected by five separate solid-state detector telescopes that are oriented to give nearly complete pitch-angle coverage from the spinning spacecraft. Ion elemental abundances are determined by Delta E vs E telescope using a thin (5 microns) front solid state detector element in a three-element telescope. Experimental operation is controlled by a microprocessor-based data system. Inflight calibration is provided by radioactive sources mounted on telescope covers which can be closed for calibration purposes and for radiation protection during the course of the mission. Ion and electron spectral information is determined using both broad-energy-range rate channels and a 32 channel pulse-height analyzer for more detailed spectra. Some initial in-ecliptic measurements are presented which demonstrate the features of the instrument.

Lanzerotti, L. J.↗

NASA NTRS1991

A hybrid symbolic/finite-element algorithm for solving nonlinear optimal control problems

The general code described is capable of solving difficult nonlinear optimal control problems by using finite elements and a symbolic manipulator. Quick and accurate solutions are obtained with a minimum for user interaction. Since no user programming is required for most problems, there are tremendous savings to be gained in terms of time and money.

Bless, Robert R.↗

NASA NTRS1991

Formulation of full state feedback for infinite order structural systems

The estimation of exact displacement and displacement rate feedback kernels from finite dimensional control solutions based on finite element structural models is discussed. These kernels are then transformed to equivalent curvature and curvature rate feedback kernels. These curvature kernels are augmented with single point displacement and rotation feedback to account for rigid body motions. A growing class of sensors known as area-averaging sensors is used to measure the curvature and curvature rate state functions. The output of area-averaging sensors equals the convolution of all structural curvature states with the spatial sensitivity function of the sensors. Transforming the discrete feedback gains into continuous feedback kernels and employing area-averaging sensors make it possible to implement full state feedback for infinite order structural systems.

Miller, David W.↗

NASA NTRS1992

Remote systems development

Potential space missions of the nineties and the next century require that we look at the broad category of remote systems as an important means to achieve cost-effective operations, exploration and colonization objectives. This paper addresses such missions, which can use remote systems technology as the basis for identifying required capabilities which must be provided. The relationship of the space-based tasks to similar tasks required for terrestrial applications is discussed. The development status of the required technology is assessed and major issues which must be addressed to meet future requirements are identified. This includes the proper mix of humans and machines, from pure teleoperation to full autonomy; the degree of worksite compatibility for a robotic system; and the required design parameters, such as degrees-of-freedom. Methods for resolution are discussed including analysis, graphical simulation and the use of laboratory test beds. Grumman experience in the application of these techniques to a variety of design issues are presented utilizing the Telerobotics Development Laboratory which includes a 17-DOF robot system, a variety of sensing elements, Deneb/IRIS graphics workstations and control stations. The use of task/worksite mockups, remote system development test beds and graphical analysis are discussed with examples of typical results such as estimates of task times, task feasibility and resulting recommendations for design changes. The relationship of this experience and lessons-learned to future development of remote systems is also discussed.

Olsen, R.↗

NASA NTRS1992

Intelligent robots for planetary exploration and construction

Robots capable of practical applications in planetary exploration and construction will require realtime sensory-interactive goal-directed control systems. A reference model architecture based on the NIST Real-time Control System (RCS) for real-time intelligent control systems is suggested. RCS partitions the control problem into four basic elements: behavior generation (or task decomposition), world modeling, sensory processing, and value judgment. It clusters these elements into computational nodes that have responsibility for specific subsystems, and arranges these nodes in hierarchical layers such that each layer has characteristic functionality and timing. Planetary exploration robots should have mobility systems that can safely maneuver over rough surfaces at high speeds. Walking machines and wheeled vehicles with dynamic suspensions are candidates. The technology of sensing and sensory processing has progressed to the point where real-time autonomous path planning and obstacle avoidance behavior is feasible. Map-based navigation systems will support long-range mobility goals and plans. Planetary construction robots must have high strength-to-weight ratios for lifting and positioning tools and materials in six degrees-of-freedom over large working volumes. A new generation of cable-suspended Stewart platform devices and inflatable structures are suggested for lifting and positioning materials and structures, as well as for excavation, grading, and manipulating a variety of tools and construction machinery.

Albus, James S.↗

NASA NTRS1993

A decoupled control approach for magnetic suspension systems using electromagnets mounted in a planar array

A decoupled control approach for a Large Gap Magnetic Suspension System (LGMSS) is presented. The control approach is developed for an LGMSS which provides five degree-of-freedom control of a cylindrical suspended element that contains a core composed of permanent magnet material. The suspended element is levitated above five electromagnets mounted in a planar array. Numerical results are obtained by using the parameters of the Large Angle Magnetic Suspension Test Fixture (LAMSTF) which is a small scale laboratory model LGMSS.

Groom, Nelson J.↗

NASA NTRS1992

Large autonomous spacecraft electrical power system (LASEPS)

NASA - Marshall Space Flight Center is creating a large high voltage electrical power system testbed called LASEPS. This testbed is being developed to simulate an end-to-end power system from power generation and source to loads. When the system is completed it will have several power configurations, which will include several battery configurations. These configurations are: two 120 V batteries, one or two 150 V batteries, and one 250 to 270 V battery. This breadboard encompasses varying levels of autonomy from remote power converters to conventional software control to expert system control of the power system elements. In this paper, the construction and provisions of this breadboard are discussed.

Dugal-Whitehead, Norma R.↗

NASA NTRS1992

Future needs for space robots for SEI

High level systems engineering modeling and analysis activities for the Space Exploration Initiative (SEI) are reviewed, with emphasis on planet surface systems. Particular attention is given to SEI studies, preliminary space robotic system requirements, and usefulness of space robotic systems developed to operate on planetary surfaces on earth. It is concluded that supervised intelligent systems on the planet surfaces are necessary to make SEI planet surface activities reliable and productive and encompass capabilities for control and monitoring of all elements, including supervised autonomous robotic systems. Amplification of human capabilities due to applying more knowledge and reasoning in more flexible and appropriate ways than conventional automation approaches will provide more robust performance, greater choice of interaction modes with operators, and greater transparency of operation.

Erickson, Jon D.↗

NASA NTRS1991

Full complex spatial filtering with a phase mostly DMD

A new technique for implementing fully complex spatial filters with a phase mostly deformable mirror device (DMD) light modulator is described. The technique combines two or more phase-modulating flexure-beam mirror elements into a single macro-pixel. By manipulating the relative phases of the individual sub-pixels within the macro-pixel, the amplitude and the phase can be independently set for this filtering element. The combination of DMD sub-pixels into a macro-pixel is accomplished by adjusting the optical system resolution, thereby trading off system space bandwidth product for increased filtering flexibility. Volume in the larger dimensioned space, space bandwidth-complex axes count, is conserved. Experimental results are presented mapping out the coupled amplitude and phase characteristics of the individual flexure-beam DMD elements and demonstrating the independent control of amplitude and phase in a combined macro-pixel. This technique is generally applicable for implementation with any type of phase modulating light modulator.

Florence, James M.↗

NASA NTRS1993

RADARSAT program

Work on the RADARSAT system is progressing towards the currently scheduled launch date of early 1995. The spacecraft bus and the Synthetic Aperture Radar (SAR) payload are at various stages of development. Requirements for the ground segment have been mostly established. The design of the ground elements such as the mission control facility and the SAR data processor is underway. The SAR applications development work is continuing and the chosen distributor, RADARSAT International Inc. (RSI) is making preparations to market RADARSAT data internationally. A plan for the follow-on to RADARSAT 1 is being finalized to ensure continuity of SAR data under the Radarsat program.

Mcnally, J.↗

NASA NTRS1994

Implementation of a decoupled controller for a magnetic suspension system using electromagnets mounted in a planar array

An implementation of a decoupled, single-input/single-output control approach for a large angle magnetic suspension test fixture is described. Numerical and experimental results are presented. The experimental system is a laboratory model large gap magnetic suspension system which provides five degree-of-freedom control of a cylindrical suspended element. The suspended element contains a core composed of permanent magnet material and is levitated above five electromagnets mounted in a planar array.

Cox, D. E.↗