Search NASA⌕ Search

SEARCH · Search NASA

Results for “Component amounts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

Four different compositionally complex multicomponent M 3 O 4 spinels containing 5–8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe 2 O 4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. Finally, the improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.

25 ENERGY STORAGE↗

Bilayer Thickness Mismatch Controls Domain Size in Model Membranes

The observation of lateral phase separation in lipid bilayers has received considerable attention, especially in connection to lipid raft phenomena in cells. It is widely accepted that rafts play a central role in cellular processes, notably signal transduction. While micrometer-sized domains are observed with some model membrane mixtures, rafts much smaller than 100 nm beyond the reach of optical microscopy are now thought to exist, both in vitro and in vivo. We have used small-angle neutron scattering, a probe free technique, to measure the size of nanoscopic membrane domains in unilamellar vesicles with unprecedented accuracy. These experiments were performed using a four-component model system containing fixed proportions of cholesterol and the saturated phospholipid 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), mixed with varying amounts of the unsaturated phospholipids 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1,2-dioleoylsn- glycero-3-phosphocholine (DOPC). We find that liquid domain size increases with the extent of acyl chain unsaturation (DOPC:POPC ratio). Furthermore, we find a direct correlation between domain size and the mismatch in bilayer thickness of the coexisting liquid-ordered and liquid-disordered phases, suggesting a dominant role for line tension in controlling domain size. While this result is expected from line tension theories, we provide the first experimental verification in free-floating bilayers. Importantly, we also find that changes in bilayer thickness, which accompany changes in the degree of lipid chain unsaturation, are entirely confined to the disordered phase. Together, these results suggest how the size of functional domains in homeothermic cells may be regulated through changes in lipid composition.

Heberle, Frederick A↗

Development of precision laser goniometer systems

The concept of constructing precision laser goniometer systems, based on integrating a ring laser and an optical angle sensor with the holographic principle of angular scale recording is considered. The concept implies the application of the cross-calibration procedure, aimed at determination of systematic components of the errors of angle sensors, used in the system. The results of the presented system studies demonstrate the error of angular measurements amounting to {approx}0.01''. The results of implementing the proposed concept in the creation of a standard system of the plane angle unit of rigid rotation and the measuring and computing complex for automated control of digital angle transducers with high digit capacity are briefly presented. (laser optics 2012)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Early dark energy at high redshifts: status and perspectives

Early dark energy models, for which the contribution to the dark energy density at high redshifts is not negligible, influence the growth of cosmic structures and could leave observable signatures that are different from the standard cosmological constant cold dark matter ({Lambda}CDM) model. In this paper, we present updated constraints on early dark energy using geometrical and dynamical probes. From WMAP five-year data, baryon acoustic oscillations and type Ia supernovae luminosity distances, we obtain an upper limit of the dark energy density at the last scattering surface (lss), {Omega}{sub EDE}(z{sub lss}) < 2.3 Multiplication-Sign 10{sup -2} (95% C.L.). When we include higher redshift observational probes, such as measurements of the linear growth factors, Gamma-Ray Bursts (GRBs) and Lyman-{alpha} forest (Ly{alpha}), this limit improves significantly and becomes {Omega}{sub EDE}(z{sub lss}) < 1.4 Multiplication-Sign 10{sup -3} (95% C.L.). Furthermore, we find that future measurements, based on the Alcock-Paczynski test using the 21cm neutral hydrogen line, on GRBs and on the Ly{alpha} forest, could constrain the behavior of the dark energy component and distinguish at a high confidence level between early dark energy models and pure {Lambda}CDM. In this case, the constraints on the amount of early dark energy at the last scattering surface improve by a factor ten, when compared to present constraints. We also discuss the impact on the parameter {gamma}, the growth rate index, which describes the growth of structures in standard and in modified gravity models.

79 ASTRONOMY AND ASTROPHYSICS↗

K{sup 0} {yields} and B{sup 0} {yields} B-bar{sup 0} transitions in the minimal supersymmetric standard model involving explicit CP violation in the Higgs sector

Mixing in the systems of neutral K{sup 0} and B{sup 0} mesons is considered within the minimal supersymmetric standard model (MSSM) containing a type-II Yukawa sector and featuring an explicitCP violation in the Higgs potential. In the case of a strong mixing of CP-even and CP-odd states, the model admits the presence of a light charged Higgs boson. Basic mixing parameters are calculated. These include the mass difference {Delta}m{sub LS} between neutral kaons and the parameter {epsilon}, which characterizes the amount of an indirect CP violation (that is, that which arises owing to an ultraweak mixing of CP-invariant and CP-noninvariant components). In the limit of the low-energy one-loop approximation, it is shown that, for the K{sup 0} mesons, the contribution of nonstandard-physics effects to the mass splitting of the neutral kaons and an indirect CP violation are very small and are weakly dependent on the mass of the charged Higgs boson. Under certain conditions, the nonstandard contributions for the B{sub d}{sup 0}-B-bar{sub d}{sup 0} and B{sub s}{sup 0}-B-bar{sub s}{sup 0} systems may become somewhat more substantial, which constrains the MSSM parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resolution of Qualification Issues for Existing Structural Materials

This report gives a detailed assessment of several key technical issues that needs resolution for the existing structural materials with emphasis on application in liquid metal reactors (LMRs), in particular, sodium cooled fast reactors. The work is a combined effort between Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL) with ANL as the technical lead, as part of Advanced Structural Materials Program for the Advanced Fuel Cycle Initiative (AFCI) Reactor Campaign. The report is the second deliverable in FY09 (M2505050201) under the work package “Advanced Materials Code Qualification”. The overall objective of the Advanced Materials Code Qualification project is to evaluate the key technical requirements for the qualification of currently available and future advanced materials for application in sodium reactor systems and the resolution of issues that the U.S. Nuclear Regulatory Commission (NRC) has raised in the past on structural materials in support of the design and licensing of the LMR. Advanced materials are a critical element in the development of sodium reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility, but also is essential for the economics of future advanced sodium reactors. Qualification and licensing of advanced materials are prominent needs for developing and implementing advanced sodium reactor technologies. However, the development of sufficient database and qualification of these materials for application in LMRs require considerable amount of time and resources. In the meantime, the currently available materials will be used in the early development of fast reactors. Nuclear structural component designs in the U.S. comply with the ASME Boiler and Pressure Vessel Code Section III (Rules for Construction of Nuclear Facility Components) and the NRC grants licensing. As the LMR will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Section III Subsection NH (Class 1 Components in Elevated Temperature Service). Assessment of materials performance issues and high temperature design methodology issues pertinent to the LMR were presented in an earlier report (Natesan et al. 2008). In a subsequent report (Majumdar et al. 2009), we addressed the needs in high temperature methodologies for design of various high temperature components in sodium cooled fast reactor. The present report addresses several key technical issues for the currently available structural materials such as Type 304 and 316 austenitic stainless steels and ferritic steels such as 2.25Cr-1Mo and modified 9Cr-1Mo. The 60-year design life for the LMR presents a significant challenge to the development of database, extrapolation/prediction of long-term performance, and high temperature structural design methodology. The current Subsection NH is applicable to the design life only up to 34 years. No experimental data contain test durations of 525,000 hours, and it is impractical to conduct such long-term tests in any types of testing. So far the longest creep tests for Grade 91 and Grade 92 steels have run up to 100,000 hours. It has been noted that there is a large drop in creep rupture strength in long-term tests for these high-Cr creep-resistant steels, which may result in overestimation of the long-term creep strength and allowable stress. The report addresses in detail the need for a mechanistic understanding of the structural materials, from the standpoint of the effects of thermal aging, creep deformation, creep fracture, fatigue and creep-fatigue, creep-fatigue predictive models, fatigue and creep crack growth, and fracture toughness. Based on an in-depth assessment of the available data and mechanistic understanding, key technical issues are identified and discussed for each of the property areas. Furthermore, we have proposed viable approaches to resolve the issues and prioritized our recommendations.

Natesan, K.↗

Modeling Solute Thermokinetics in LiCl-KCl Molten Salt for Nuclear Waste Separation (NEUP 10-418)

Recovery of actinides is an integral part of a closed nuclear fuel cycle. Pyrometallurgical nuclear fuel recycling processes have been developed in the past for recovering actinides from spent metallic and nitride fuels. The process is essentially to dissolve the spent fuel in a molten salt and then extract just the actinides for reuse in a reactor. Extraction is typically done through electrorefining, which involves electrochemical reduction of the dissolved actinides and plating onto a cathode. Knowledge of a number of basic thermokinetic properties of salts and salt-fuel mixtures is necessary for optimizing present and developing new approaches for pyrometallurgical waste processing. The properties of salt-fuel mixtures are presently being studied, but there are so many solutes and varying concentrations that direct experimental investigation is prohibitively time consuming and expensive (particularly for radioactive elements like Pu). Therefore, there is a need to reduce the number of required experiments through modeling of salt and salt-fuel mixture properties. This project will develop first-principles-based molecular modeling and simulation approaches to predict fundamental thermokinetic properties of dissolved actinides and fission products in molten salts. The focus of the proposed work is on property changes with higher concentrations (up to 5 mol%) of dissolved fuel components, where there is still very limited experimental data. The properties predicted with the modeling will be density, which is used to assess the amount of dissolved material in the salt; diffusion coefficients, which can control rates of material transport during separation; and solute activity, which determines total solubility and reduction potentials used during electrorefining. The work will focus on La, Sr, and U, which are chosen to include the important distinct categories of lanthanides, alkali earths, and actinides, respectively. Studies will be performed using LiCl-KCl salt at the eutectic composition (58 mol% LiCl, 42 mol% KCl), which is used for treating spent EBR-II fuel. The same process being used for EBRII fuel is currently being studied for widespread international implementation. The methods will focus on first-principles and first- principles derived interatomic potential based simulations, primarily using molecular dynamics. Results will be validated against existing literature and parallel ongoing experimental efforts. The simulation results will be of value for interpreting experimental results, validating analytical models, and for optimizing waste separation by potentially developing new salt configurations and operating conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

TANK 26 EVAPORATOR FEED PUMP TRANSFER ANALYSIS

The transfer of liquid salt solution from Tank 26 to an evaporator is to be accomplished by activating the evaporator feed pump, located approximately 72 inches above the sludge layer, while simultaneously turning on the downcomer. Previously, activation of the evaporator feed pump was an isolated event without any other components running at the same time. An analysis of the dissolved solution transfer has been performed using computational fluid dynamics methods to determine the amount of entrained sludge solids pumped out of the tank to the evaporator with the downcomer turned on. The analysis results showed that, for the maximum and minimum supernate levels in Tank 26 (252.5 and 72 inches above the sludge layer, respectively), the evaporator feed pump will entrain between 0.05 and 0.1 wt% sludge solids weight fraction into the eductor, respectively. Lower tank liquid levels, with respect to the sludge layer, result in higher amounts of sludge entrainment due to the increased velocity of the plunging jets from the downcomer and evaporator feed pump bypass as well as decreased dissipation depth.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tank 26 Evaporator Feed Pump Transfer Analysis

The transfer of liquid salt solution from Tank 26 to an evaporator is to be accomplished by activating the evaporator feed pump, located approximately 72 inches above the sludge layer, while simultaneously turning on the downcomer. Previously, activation of the evaporator feed pump was an isolated event without any other components running at the same time. An analysis of the dissolved solution transfer has been performed using computational fluid dynamics methods to determine the amount of entrained sludge solids pumped out of the tank to the evaporator with the downcomer turned on. The analysis results showed that, for the maximum and minimum supernate levels in Tank 26 (252.5 and 72 inches above the sludge layer, respectively), the evaporator feed pump will entrain between 0.03 and 0.1 wt% sludge undissolved solids weight fraction into the eductor, respectively, and therefore are an order of magnitude less than the 1.0 wt% undissolved solids loading criteria to feed the evaporator. Lower tank liquid levels, with respect to the sludge layer, result in higher amounts of sludge entrainment due to the increased velocity of the plunging jets from the downcomer and evaporator feed pump bypass as well as decreased dissipation depth. Revision 1 clarifies the analysis presented in Revision 0 and corrects a mathematical error in the calculations for Table 4.1 in Revision 0. However, the conclusions and recommendations of the analysis do not change for Revision 1.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

THE PREVALENCE OF GAS OUTFLOWS IN TYPE 2 AGNs. II. 3D BICONICAL OUTFLOW MODELS

We present 3D models of biconical outflows combined with a thin dust plane for investigating the physical properties of the ionized gas outflows and their effect on the observed gas kinematics in type 2 active galactic nuclei (AGNs). Using a set of input parameters, we construct a number of models in 3D and calculate the spatially integrated velocity and velocity dispersion for each model. We find that three primary parameters, i.e., intrinsic velocity, bicone inclination, and the amount of dust extinction, mainly determine the simulated velocity and velocity dispersion. Velocity dispersion increases as the intrinsic velocity or the bicone inclination increases, while velocity (i.e., velocity shifts with respect to systemic velocity) increases as the amount of dust extinction increases. Simulated emission-line profiles well reproduce the observed [O iii] line profiles, e.g., narrow core and broad wing components. By comparing model grids and Monte Carlo simulations with the observed [O iii] velocity–velocity dispersion distribution of ∼39,000 type 2 AGNs, we constrain the intrinsic velocity of gas outflows ranging from ∼500 to ∼1000 km s{sup −1} for the majority of AGNs, and up to ∼1500–2000 km s{sup −1} for extreme cases. The Monte Carlo simulations show that the number ratio of AGNs with negative [O iii] velocity to AGNs with positive [O iii] velocity correlates with the outflow opening angle, suggesting that outflows with higher intrinsic velocity tend to have wider opening angles. These results demonstrate the potential of our 3D models for studying the physical properties of gas outflows, applicable to various observations, including spatially integrated and resolved gas kinematics.

79 ASTRONOMY AND ASTROPHYSICS↗

High-resolution X-Ray Spectroscopy of the Seyfert 1 Galaxy Mrk 1040. Revealing the Failed Nuclear Wind with Chandra

High-resolution X-ray spectroscopy of the warm absorber in the nearby X-ray bright Seyfert 1 galaxy Mrk 1040 is presented. The observations were carried out in the 2013–2014 timeframe using the Chandra High Energy Transmission Grating with a total exposure of 200 ks. A multitude of absorption lines from Ne, Mg, and Si are detected from a wide variety of ionization states. In particular, the detection of inner K-shell absorption lines from Ne, Mg, and Si, from charge states ranging from F-like to Li-like ions, suggests the presence of a substantial amount of low-ionization absorbing gas, illuminated by a steep soft X-ray continuum. The observations reveal at least three warm absorbing components ranging in ionization parameter from log(ξ/erg cm s{sup −1})=0--2 and with column densities of N{sub H}=1.5--4.0×10{sup 21} cm{sup −2}. The velocity profiles imply that the outflow velocities of the absorbing gas are low and within ±100 km s{sup −1} of the systemic velocity of Mrk 1040, which suggests that any outflowing gas may have stalled in this AGN on large enough scales. The warm absorber is likely located far from the black hole, within 300 pc of the nucleus, and is spatially coincident with emission from an extended narrow-line region as seen in the Hubble Space Telescope images. The iron K-band spectrum reveals only narrow emission lines, with Fe Kα at 6.4 keV consistent with originating from reflection off Compton-thick pc-scale reprocessing gas.

79 ASTRONOMY AND ASTROPHYSICS↗

Machine Learning for Identifying Relevance to Biosurveillance in Multilingual Text

Objective: The objective is to develop an ensemble of machine learning algorithms to identify multilingual, online articles that are relevant to biosurveillance. Language morphology varies widely across languages and must be accounted for when designing algorithms. Here, we compare the performance of a word embedding-based approach and a topic modeling approach with machine learning algorithms to determine the best method for Chinese, Arabic, and French languages. Introduction: Global biosurveillance is an extremely important, yet challenging task. One form of global biosurveillance comes from harvesting open source online data (e.g. news, blogs, reports, RSS feeds). The information derived from this data can be used for timely detection and identification of biological threats all over the world. However, the more inclusive the data harvesting procedure is to ensure that all potentially relevant articles are collected, the more data that is irrelevant also gets harvested. This issue can become even more complex when the online data is in a non-native language. Foreign language articles not only create language-specific issues for Natural Language Processing (NLP), but also add a significant amount of translation costs. Previous work shows success in the use of combinatory monolingual classifiers in specific applications, e.g., legal domain [1]. A critical component for a comprehensive, online harvesting biosurveillance system is the capability to identify relevant foreign language articles from irrelevant ones based on the initial article information collected, without the additional cost of full text retrieval and translation.

Machine learning↗

OSO-7 observations of solar X-rays in the energy range 10-100 keV

Data on 123 hard X-ray bursts observed by the satellite OSO-7 between Oct. 10, 1971 and June 6, 1972 are described and evaluated. Typical duration of a burst is 100 sec. Average spectral indices lie between 3.5 and 5.5 for two-thirds of the 123 bursts, with a median of 4.6. In some events a soft-hard-soft pattern is observed, but there are numerous examples in which the spectrum softens continuously throughout the burst. The mean shape of the hard X-ray time profile as measured by the full width at half maximum does not depend on burst amplitude; nor does the spectral hardness correlate with the flux. The distribution of burst peak fluxes and the observation of large soft X-ray bursts without accompanying hard X rays suggest the existence of a distinct class of solar flares which emit only soft X rays. No center-to-limb variation was found in the frequency of occurrence of bursts or in the fraction with a nonthermal component. Estimates of the energy in the form of nonthermal electrons and in the flare plasma derived from these data indicate that the total amounts in each are comparable.

Datlowe, D. W.↗

CELSS System Control Overview

A CELSS presents unique control problems at all levels. The question of how much control is necessary (as opposed to just useful) is addressed. On the largest scale, that of overall system control, this reduces to the question, ""Is a CELSS that has been designed for steady-state balance in all its flows, with the addition of reasonable amounts of buffering, stable in the face of perturbations from that operating point?'' That is, if some inadvertent perturbation occurs (temporary shutdown of some component, for example), will the system return to its original operating point without the imposition of a global control scheme? If the system is stable in that sense, any kind of large-scale control scheme will be useful for optimizing the system, but will not be necessary.

Auslander, D. M.↗

Structure/permeability relationships of silicon-containing polyimides

The permeability to H2, O2, N2, CO2 and CH4 of three silicone-polyimide random copolymers and two polyimides containing silicon atoms in their backbone chains, was determined at 35.0 C and at pressures up to about 120 psig (approximately 8.2 atm). The copolymers contained different amounts of BPADA-m-PDA and amine-terminated poly (dimethyl siloxane) and also had different numbers of siloxane linkages in their silicone component. The polyimides containing silicon atoms (silicon-modified polyimides) were SiDA-4,4'-ODA and SiDA-p-PDA. The gas permeability and selectivity of the copolymers are more similar to those of their silicone component than of the polyimide component. By contrast, the permeability and selectivity of the silicon-modified polyimides are more similar to those of their parent polyimides, PMDA-4,4'-ODA and SiDA-p-PDA. The substitution of SiDA for the PMDA moiety in a polyimide appears to result in a significant increase in gas permeability, without a correspondingly large decrease in selectivity. The potential usefulness of the above polymers and copolymers as gas separation membranes is discussed.

Stern, S. A.↗

Evidence of orbital forcing in 510 to 530 million year old shallow marine cycles, Utah and western Canada

Spectral analyses of two sequences of shallow marine sedimentary cycles that were deposited between 510 and 530 million years ago were completed. One sequence is from Middle Cambrian rocks in southern Utah and the other is from Upper Cambrian rocks in the southern Canadian Rockies. In spite of the antiquity of these strata, and even though there are differences in the age, location, and cycle facies between the two sequences, both records have distinct spectral peaks with surprisingly similar periodicities. A null model constructed to test for significance of the spectral peaks and circulatory in the methodology indicates that all but one of the spectral peaks are significant at the 90 percent confidence level. When the ratios between the statistically significant peaks are measured, we find a consistent relation to orbital forcing; specifically, the spectral peak ratios in both the Utah and Canadian examples imply that a significant amount of the variance in the cyclic records is driven by the short eccentricity (approximately 109 ky) and by the precessional (approximately 21 ky) components of the Earth's orbital variations. Neither section contains a significant component of variance at the period of the obliquity cycle, however.

Bond, Gerard C.↗

Retrieval of Black Carbon Absorption from Proposed Satellite Measurements Over the Ocean Glint

Haze and air pollution includes many chemicals that together form small particles suspended in the air called aerosols. One of the main ingredients found to affect climate and human health is Black Carbon. Black particles emitted from engines that do not burn the fuel completely, e.g. old trucks. Black carbon absorption of sunlight emerges as one of the key components of man-made forcing of climate. However, global characterization of black carbon emissions, distribution and pathways in which it can affect the amount of solar radiation absorbed by the atmosphere is very uncertain. A new method is proposed to measure sunlight absorption by fine aerosol particles containing black carbon over the ocean glint from a satellite mission designed for this purpose. The satellite will scan the same spot over the ocean in the glint plane and a plane 40 degrees off-glint a minute apart, collecting measurements of the reflected light across the solar spectrum. First the dark ocean off the glint is used to derive aerosol properties. Then the black carbon absorption is derived prop the attenuation of the bright glint by the aerosol layer. Such measurements if realized in a proposed future mission - COBRA are expected to produce global monthly climatology of black carbon absorption with high accuracy (110 to 15%) that can show their effect on climate.

Kaufman, Y. J.↗

Reconciling the MOLA, TES, and Neutron Observations of the North Polar CO2 Mass Budget on Mars

There are now three independent observations of the CO2 polar cap mass budget of Mars' north polar cap. The first is based elevation changes detected by the Mars Orbiter Laser Altimeter (MOLA) on the Mars Global Surveyor (MGS). The second is based on MGS Thermal Emission Spectrometer (TES) broadband observations of the solar and infrared radiation fields at the top of the atmosphere. The third is based on neutron counts measured by the neutron spectrometer (NS) on Odyssey. The TES data are based on an energy balance. The net radiative loss (gain) in a column is balanced by latent heating due condensation (sublimation) of CO2. In calculating the mass budget, the other main energy sources, atmospheric heat transport and subsurface conduction, were neglected. At the pole, atmospheric heat transport is indeed a small term. However, subsurface heat conduction can be significant because at the North Pole water ice, which has a high thermal conductivity compared to bare soil, is a dominant component of the subsurface. Thus, heat conducted down into the ice during summer will slowly bleed back out during fall and winter reducing the amount of CO2 that condenses on the pole. We have taken a first cut at quantifying this effect by fitting a curve to Paige's estimates of the conducted energy flux in his analysis of Viking IRTM data.

Haberle, R. M.↗