Search NASA⌕ Search

SEARCH · Search NASA

Results for “Contacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Investigating Alkylsilane Monolayer Tribology at a Single-Asperity Contact with Molecular Dynamics Simulation

Chemisorbed monolayer films are known to possess favorable characteristics for nanoscale lubrication of micro- and nanoelectromechanical systems (MEMS/NEMS). Prior studies have shown that the friction observed for monolayer-coated surfaces features a strong dependence on the geometry of contact. Specifically, tip-like geometries have been shown to penetrate into monolayer films, inducing defects in the monolayer chains and leading to plowing mechanisms during shear, which result in higher coefficients of friction (COF) than those observed for planar geometries. In this work, we use molecular dynamics simulations to examine the tribology of model silica single-asperity contacts under shear with monolayer-coated substrates featuring various film densities. It is observed that lower monolayer densities lead to reduced COFs, in contrast to results for planar systems where COF is found to be nearly independent of monolayer density. This is attributed to a liquid-like response to shear, whereby fewer defects are imparted in monolayer chains from the asperity, and chains are easily displaced by the tip as a result of the higher free volume. This transition in the mechanism of molecular plowing suggests that liquid-like films should provide favorable lubrication at single-asperity contacts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermally Stable Ruthenium Contact for Robust p‑Type Tellurium Transistors

Tellurium (Te) is attractive for p-channel transistors due to its high hole mobility. Despite having a low thermal budget suitable for back-end-of-line (BEOL) monolithic integration, the practical realization of Te transistors is hindered by its thermal stability. In this work, we investigate thermal stability for Te thin films grown via scalable thermal evaporation. Our findings identify ruthenium as a more thermally stable contact for p-type Te transistors, capable of withstanding temperatures up to 250 °C. Ruthenium exhibits significantly lower diffusivity in Te compared to other contact metals commonly used such as nickel and palladium. Using the transfer-length method, we measured a contact resistance of 1.25 kΩ·μm at the ruthenium-tellurium interface. Additionally, the incorporation of high-κ ZrO2 encapsulation not only suppresses the sublimation of the Te channel at elevated temperatures but also serves as the gate dielectric in top-gate devices operating at 1 V, achieving an on/off current ratio of 105.

Rahman, I K M Reaz↗

In situ liquid cell TEM reveals bridge-induced contact and fusion of Au nanocrystals in aqueous solution

During nanoparticle coalescence in aqueous solution, dehydration and initial contact of particles are critically important but poorly understood processes. In this work, we used in situ liquid-cell transmission electron microscopy to directly visualize the coalescence process of Au nanocrystals. It was found that the Au atomic nanobridge forms between adjacent nanocrystals that are separated by a ~0.5 nm hydration layer. The nanobridge structure first induces initial contact of Au nanocrystals over their hydration layers and then surface diffusion and grain boundary migration to rearrange into a single nanocrystal. Classical density functional theory calculations and ab initio molecular dynamics simulations suggest that the formation of the nanobridge can be attributed to the accumulation of auric ions and a higher local supersaturation in the gap, which can promote dehydration, contact, and fusion of Au nanocrystals. The discovery of this multistep process advances our understanding of the nanoparticle coalescence mechanism in aqueous solutions.

Jin, Biao↗

Polymeric Electron-Selective Contact for Crystalline Silicon Solar Cells with an Efficiency Exceeding 19%

Carrier-selective contacts have become a prominent path forward toward efficient crystalline silicon (c-Si) photovoltaics. Among the proposed contacting materials, organic materials may offer simplified and low-cost processing compared with typical vacuum deposition techniques. In this paper, branched polyethylenimine (b-PEI) is presented as an electron-transport layer (ETL) for c-Si solar cells. The incorporation of a b-PEI interlayer between c-Si(n) and Al leads to a low contact resistivity of 24 mΩ cm 2 . A silicon heterojunction solar cell integrated with b-PEI is demonstrated achieving a power conversion efficiency of 19.4%, which improves the benchmark efficiency of a c-Si solar cell with an organic ETL. This electron selectivity of b-PEI is attributed to its Lewis basicity, i.e., electron-donating ability, promoting favorable band bending at the c-Si surface for electron transport. Moreover, several other Lewis base polymers perform as efficient ETLs in organic/c-Si hybrid devices, indicating Lewis basicity could be a guideline for future organic ETL design.

14 SOLAR ENERGY↗

Importance of halogen---halogen contacts for the structural and magnetic properties of CuX{<_2}(pyrazine-N,N'-dioxide)(H{<_2}O){<_2} (x = Cl & Br).

The structural and magnetic properties of the newly crystallized CuX{sub 2}(pyzO)(H{sub 2}O){sub 2} (X = Cl, Br; pyzO = pyrazine-N,N{prime}-dioxide) coordination polymers are reported. These isostructural compounds crystallize in the monoclinic space group C2/c with, at 150 K, a = 17.0515(7) {angstrom}, b = 5.5560(2) {angstrom}, c = 10.4254(5) {angstrom}, {beta} = 115.400(2){sup o}, and V = 892.21(7) {angstrom}{sup 3} for X = Cl and a = 17.3457(8) {angstrom}, b = 5.6766(3) {angstrom}, c = 10.6979(5) {angstrom}, {beta} = 115.593(2){sup o}, and V = 950.01(8) {angstrom}{sup 3} for X = Br. Their crystal structure is characterized by one-dimensional chains of Cu{sup 2+} ions linked through bidentate pyzO ligands. These chains are joined together through OH {hor_ellipsis} O hydrogen bonds between the water ligands and pyzO oxygen atoms and Cu-X {hor_ellipsis} X-Cu contacts. Bulk magnetic susceptibility measurements at ambient pressure show a broad maximum at 7 (Cl) and 28 K (Br) that is indicative of short-range magnetic correlations. The dominant spin exchange is the Cu-X {hor_ellipsis} X-Cu supersuperexchange because the magnetic orbital of the Cu{sup 2+} ion is contained in the CuX{sub 2}(H{sub 2}O){sub 2} plane and the X {hor_ellipsis} X contact distances are short. The magnetic data were fitted to a Heisenberg 1D uniform antiferromagnetic chain model with J1D/kB = -11.1(1) (Cl) and -45.9(1) K (Br). Magnetization saturates at fields of 16.1(3) (Cl) and 66.7(5) T (Br), from which J1D is determined to be -11.5(2) (Cl) and -46.4(5) K (Br). For the Br analog the pressure dependence of the magnetic susceptibility indicates a gradual increase in the magnitude of J1D/kB up to -51.2 K at 0.84 GPa, suggesting a shortening of the Br {hor_ellipsis} Br contact distance under pressure. At higher pressure X-ray powder diffraction data indicates a structural phase transition at 3.5 GPa. Muon-spin relaxation measurements indicate that CuCl{sub 2}(pyzO)(H{sub 2}O){sub 2} is magnetically ordered with TN = 1.06(1) K, while the signature for long-range magnetic order in CuBr{sub 2}(pyzO)(H{sub 2}O){sub 2} was much less definitive down to 0.26 K. The results for the CuX{sub 2}(pyzO)(H{sub 2}O){sub 2} complexes are compared to the related CuX{sub 2}(pyrazine) materials.

08 HYDROGEN↗

Enhanced Semiconductor Nanocrystal Conductance via Solution Grown Contacts

We report a 100,000-fold increase in the conductance of individual CdSe nanorods when they are electrically contacted via direct solution phase growth of Au tips on the nanorod ends. Ensemble UV-Vis and X-Ray photoelectron spectroscopy indicate this enhancement does not result from alloying of the nanorod. Rather, low temperature tunneling and high temperature (250-400 K) thermionic emission across the junction at the Au contact reveal a 75percent lower interface barrier to conduction compared to a control sample. We correlate this barrier lowering with the electronic structure at the Au-CdSe interface. Our results emphasize the importance of nanocrystal surface structure for robust device performance and the advantage of this contact method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ER-associated VAP27-1 and VAP27-3 proteins functionally link the lipid-binding ORP2A at the ER-chloroplast contact sites

Abstract The plant endoplasmic reticulum (ER) contacts heterotypic membranes at membrane contact sites (MCSs) through largely undefined mechanisms. For instance, despite the well-established and essential role of the plant ER-chloroplast interactions for lipid biosynthesis, and the reported existence of physical contacts between these organelles, almost nothing is known about the ER-chloroplast MCS identity. Here we show that the Arabidopsis ER membrane-associated VAP27 proteins and the lipid-binding protein ORP2A define a functional complex at the ER-chloroplast MCSs. Specifically, through in vivo and in vitro association assays, we found that VAP27 proteins interact with the outer envelope membrane (OEM) of chloroplasts, where they bind to ORP2A. Through lipidomic analyses, we established that VAP27 proteins and ORP2A directly interact with the chloroplast OEM monogalactosyldiacylglycerol (MGDG), and we demonstrated that the loss of the VAP27-ORP2A complex is accompanied by subtle changes in the acyl composition of MGDG and PG. We also found that ORP2A interacts with phytosterols and established that the loss of the VAP27-ORP2A complex alters sterol levels in chloroplasts. We propose that, by interacting directly with OEM lipids, the VAP27-ORP2A complex defines plant-unique MCSs that bridge ER and chloroplasts and are involved in chloroplast lipid homeostasis.

59 BASIC BIOLOGICAL SCIENCES↗

Low Ohmic contact resistance and high on/off ratio in transition metal dichalcogenides field-effect transistors via residue-free transfer

Beyond-silicon technology demands ultrahigh performance field-effect transistors. Transition metal dichalcogenides provide an ideal material platform, but the device performances such as the contact resistance, on/off ratio and mobility are often limited by the presence of interfacial residues caused by transfer procedures. Here, we show an ideal residue-free transfer approach using polypropylene carbonate with a negligible residue coverage of ~0.08% for monolayer MoS 2 at the centimetre scale. By incorporating a bismuth semimetal contact with an atomically clean monolayer MoS 2 field-effect transistor on hexagonal boron nitride substrate, we obtain an ultralow Ohmic contact resistance of ~78 Ω µm, approaching the quantum limit, and a record-high on/off ratio of ~10 11 at 15 K. Further, such an ultra-clean fabrication approach could be the ideal platform for high-performance electrical devices using large-area semiconducting transition metal dichalcogenides.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic properties of MoS2 / MoOx interfaces: Implications in Tunnel Field Effect Transistors and Hole Contacts

In an electronic device based on two dimensional (2D) transitional metal dichalcogenides (TMDs), finding a low resistance metal contact is critical in order to achieve the desired performance. However, due to the unusual Fermi level pinning in metal/2D TMD interface, the performance is limited. Here, we investigate the electronic properties of TMDs and transition metal oxide (TMO) interfaces (MoS 2 /MoO 3 ) using density functional theory (DFT). Our results demonstrate that, due to the large work function of MoO 3 and the relative band alignment with MoS 2 , together with small energy gap, the MoS 2 /MoO 3 interface is a good candidate for a tunnel field effect (TFET)-type device. Moreover, if the interface is not stoichiometric because of the presence of oxygen vacancies in MoO 3 , the heterostructure is more suitable for p-type (hole) contacts, exhibiting an Ohmic electrical behavior as experimentally demonstrated for different TMO/TMD interfaces. Our results reveal that the defect state induced by an oxygen vacancy in the MoO3 aligns with the valance band of MoS 2 , showing an insignificant impact on the band gap of the TMD. This result highlights the role of oxygen vacancies in oxides on facilitating appropriate contacts at the MoS 2 and MoO x (x < 3) interface, which consistently explains the available experimental observations.

36 MATERIALS SCIENCE↗

Tailoring the cavities of hydrogen-bonded amphidynamic crystals using weak contacts: towards faster molecular machines

This work describes the use of C–H∙∙∙F–C contacts in the solid-state from the stator towards the rotator to fine-tune their internal motion, by constructing a set of interactions that generate close-fitting cavities in three supramolecular rotors 1–3I. The crystal structures of these rotors, determined by synchrotron radiation experiments at different temperatures, show the presence of such C–H∙∙∙F–C contacts between extended carbazole stators featuring fluorinated phenyl rings and the 1,4-diazabicyclo[2.2.2]octane (DABCO) rotator. According to the 2 H NMR results, using deuterated samples, and periodic density functional theory computations, the rotators experience fast angular displacements (preferentially 120° jumps) due to their low rotational activation energies (E a = 0.8–2.0 kcal mol -1 ). The higher rotational barrier for 1 (2.0 kcal mol -1 ) is associated with a larger number of weak C–H∙∙∙F–C contacts generated by the stators. This strategy offers the possibility to explore the correlation among weak intermolecular forces, cavity shape, and internal dynamics, which has strong implications in the design of future fine-tuned amphidynamic crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards non-contact pollution monitoring in sewers with hyperspectral imaging

Monitoring water quality in sewers is challenging, particularly because state-of-the-art technologies require contact with the raw wastewater. The presence of fat, oil, grease, and solids makes automated grab sampling difficult and causes sensor fouling. To overcome these limitations, non-contact methods based on light reflectance, such as hyperspectral imaging (HSI), are gaining attention. However, HSI has never been tested for raw wastewater. To assess its accuracy for measuring pollution, we developed a laboratory setup and performed targeted experiments with a combination of raw and diluted wastewater, as well as synthetic turbidity stock solutions. We measured seven pollution variables: chemical oxygen demand, turbidity, dissolved organic compounds, ammonium, total nitrogen, phosphate, and sulphates. We used automated pixel selection and partial least squares regression to retrieve pollution information from the hyperspectral images. Our results, based on 144 samples, suggest that HSI can estimate pollution levels with a precision in the range of state-of-the-art absorbance spectrophotometric methods. Additionally, we found that the combination of pixel and wavelength selection, enabled by the hyperspectral data structure, significantly influences the performance of partial least square modelling. Overall, our findings indicate that HSI is a promising technology for non-contact monitoring of water quality in raw wastewater.

54 ENVIRONMENTAL SCIENCES↗

The effect of N-polar GaN domains as Ohmic contacts

Transfer line method measurements revealed that if the Ohmic contact regions were replaced by N-polar GaN, the contact resistance could be reduced from 0.71 {Omega} mm (or {rho}{sub c}=4x10{sup -6} {Omega} cm{sup 2}) to 0.24 {Omega} mm for a {approx}200 nm thick Si-doped GaN layer. The reduction in contact resistance was largely due to the {approx}10{sup 19} cm{sup -3} free carriers in N-polar source/drain regions as measured by Hall effect. Secondary ion mass spectroscopy confirmed that oxygen doping in the N-polar region was more than three orders of magnitude greater than that in the Ga-polar region that was explained by the large difference in the adsorption energy for oxygen ({approx}1.3 eV/atom) between the N- and Ga-polar surfaces during the metalorganic chemical vapor deposition.

36 MATERIALS SCIENCE↗

Si nanoparticle - Er{sup 3+} coupling through contact in as-deposited nanostructured films.

The efficient excitation of Er{sup 3+} ions through contact with Si nanoparticles (NPs) is demonstrated. A nanostructured doping process has been developed that leads to contact between Si NPs formed in situ and optically-active Er{sup 3+} ions embedded in Al{sub 2}O{sub 3}. This is achieved by independent and consecutive deposition of the dopants and matrix. The Si NP-Er{sup 3+} contact regime enhances the probability of efficient interaction due to the local spatial overlap of the electronic states of the Er{sup 3+} and of the Si NP exciton, enabling energy transfer by interband exciton recombination. This leads to up to 53% of the Er{sup 3+} ions being excited in as-deposited films.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Titanium nitride: A new Ohmic contact material for n-type CdS

In devices based on CdS, indium is often used to make Ohmic contacts. Since indium is scarce and expensive, suitable replacement materials need to be found. In this work, we show that sputtered titanium nitride forms an Ohmic contact with n-type CdS. The CdS films, deposited with chemical bath deposition, have a hexagonal crystal structure and are polycrystalline, mostly with a (002) texture. The thickness of the films is {approx}600 nm, and the donor density is 1.9 x 10{sup 16} cm{sup -3}. The donor density increases to 1.5 x 10{sup 17} cm{sup -3} upon annealing. The contact resistivity of sputtered TiN on CdS is found to be 4.7 {+-} 0.6 {Omega} cm{sup 2}. This value is sufficiently small to avoid large resistive losses in most CdS device applications. To demonstrate the use of TiN in a CdS device, a Au/CdS/TiN Schottky diode was constructed. The diode has a potential barrier of 0.69 V and an ideality factor of 2.2.

36 MATERIALS SCIENCE↗

Contact-free pyroelectric measurements using x-ray photoelectron spectroscopy

Non-contact pyroelectricity measurements based on x-ray photoelectron spectroscopy (XPS) are presented. Applied to Lithium Tantalate crystals, we demonstrate how the XPS-derived surface potential provides a simple probe of the desired property, free of all top-contact related difficulties. In particular, the increase in Lithium Tantalate spontaneous polarization under cooling, an experimentally challenging feature, is evaluated. We further inspect the roll of surface contaminants and the control over trapped surface charge in the XPS vacuum environment. Our approach can be extended to other non-contact probes, as well as to measuring additional electrical properties, such as piezoelectricity and ferroelectricity.

36 MATERIALS SCIENCE↗

Improvement of field emission properties of α-Fe{sub 2}O{sub 3} nanoflakes due to the lowered back contact barrier after high energy X-ray irradiation

Improvement in the field emission properties of α-Fe{sub 2}O{sub 3} nanoflakes is observed after high energy X-ray irradiation from synchrotron radiation. Field emission threshold field of α-Fe{sub 2}O{sub 3} nanoflakes is found to decrease from 10.1 to 7.8 MV/m after X-ray irradiation with the dose of 9.0 × 10{sup 14} phs/cm{sup 2}. Electrical measurement reveals that the potential barrier at the back contact between the α-Fe{sub 2}O{sub 3} layer and the iron substrate changes after X-ray irradiation. The observed threshold field decrease is well explained by the changes in potential barrier at the back contact of α-Fe{sub 2}O{sub 3} nanoflakes, which indicates the back contact plays an important role in controlling the field emission properties of α-Fe{sub 2}O{sub 3} nanoflakes. Our study shows that the α-Fe{sub 2}O{sub 3} nanoflakes are a promising material for the application as field emitter under X-ray environment.

36 MATERIALS SCIENCE↗

High-mobility, air stable bottom-contact n-channel thin film transistors based on N,N′-ditridecyl perylene diimide

Bottom-gate bottom-contact (BGBC) organic thin film transistors (OTFTs) based on N,N′-ditridecyl perylene diimide exhibit electron mobility as high as 3.54 cm{sup 2} V{sup −1} s{sup −1} in nitrogen, higher than that (1 cm{sup 2} V{sup −1} s{sup −1}) of bottom-gate top-contact devices. The better performance of BGBC configuration in N{sub 2} is attributed to lower contact resistance, which is further reduced by thermal annealing. After thermally annealing the BGBC OTFTs at 180 °C, electron mobility as high as 3.5 cm{sup 2} V{sup −1} s{sup −1}, current on/off ratio of 10{sup 6} and threshold voltage of 9 V are achieved in air, and the mobility retains above 1 cm{sup 2} V{sup −1} s{sup −1} after storage for two months in air. Thermal treatment enhanced crystalline grains, reduced grain boundaries, and suppressed the adsorption of H{sub 2}O and O{sub 2}, leading to excellent performance in air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of metal contacts for two-dimensional MoS{sub 2} nanoflakes

While layered materials are increasingly investigated for their potential in nanoelectronics, their functionality and efficiency depend on charge injection into the materials via metallic contacts. This work explores the characteristics of different metals (aluminium, tungsten, gold, and platinum) deposited on to nanostructured thin films made of two-dimensional (2D) MoS{sub 2} flakes. Metals are chosen based on their work functions relative to the electron affinity of MoS{sub 2}. It is observed, and analytically verified that lower work functions of the contact metals lead to smaller Schottky barrier heights and consequently higher charge carrier injection through the contacts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗