Search NASA⌕ Search

SEARCH · Search NASA

Results for “Current Controllers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Large-Signal Stability Improvement of Parallel Grid-Forming Inverter-Driven Black Start: Preprint

With the rapid increase of inverter-based resources in modern grids, advanced grid-forming (GFM) inverter capa- bilities, such as system restoration and operation under faults, are urgently needed to realize power electronics-dominant grids at scale. One such capability is inverter-driven black start using GFM inverters. This paper analyzes the ability of two recently proposed advanced GFM controls to help GFM inverters sustain system-wide, off-nominal conditions and remain synchronized until they can overcome the momentary overloading as more GFMs join the process without generator sequence coordination or communications and finally stabilize the grid. Through an extensive set of 1,200 full-order electromagnetic transient simu- lations, we evaluate the black-start process while employing the various GFM inverter controls. The results show that the GFM current limiter and primary control have a significant impact on the stability of the system during dynamic operating conditions and thus impact the success of inverter-driven system restoration.

current limit↗
NASA NTRS1990

Investigation of air transportation technology at Princeton University, 1988-1989

The Air Transportation Technology Program at Princeton University, a program emphasizing graduate and undergraduate student research, proceeded along several avenues during the past year. A study of optimal trajectories for penetration of microbursts when encounter is unavoidable was conducted. The emphasis of current wind shear research is on developing an expert system for wind shear avoidance. A knowledge-based reconfigurable flight control system that is implemented with the Pascal programming language using parallel microprocessors was developed. This expert system could be considered a prototype for a failure-tolerant control system that can be constructed using existing hardware. Development of a real-time cockpit simulator continued during the year. The simulator provides a single-person crew station with both conventional and advanced control devices; it currently is programmed to simulate the Navion single-engine general aviation airplane. Alternatives for the air traffic control system giving particular attention to the institutional structure of the FAA are analyzed. A simple numerical procedure for estimating the stochastic robustness of control systems is being investigated. The revitalization of the general aviation industry is also discussed.

Stengel, Robert F.↗
DOE OSTI2019

Nonequilibrium orbital transitions via applied electrical current in calcium ruthenates

Simultaneous control of structural and physical properties via applied electrical current poses a new, key research topic with both fundamental and technological significance. Studying the spin-orbit-coupled antiferromagnet Ca 2 RuO 4 , and its derivative with 3% Mn doping to alleviate the violent first-order transition at 357 K, we find that a small applied electrical current couples to the lattice by significantly reducing its orthorhombic distortions and octahedral rotations, while concurrently diminishing the 125-K antiferromagnetic transition. Further increasing electrical current density above 0.15A/cm 2 induces a new nonequilibrium orbital state, with a transition signature at 80 K that features a simultaneous jump in both magnetization and electrical resistivity, sharply contrasting the current-free state. Here, we argue that nonequilibrium electron occupancies of the $t_{2g}$ orbitals stabilized by applied current drive the observed lattice changes and thereby the novel phenomena in this system. Finally, we note that current-induced diamagnetism reported in recent literature [C. Sow et al., Science 358, 1084 (2017).] is not discerned in either slightly doped or pure Ca 2 RuO 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1989

A closed-form trim solution yielding minimum trim drag for airplanes with multiple longitudinal-control effectors

Airplane designs are currently being proposed with a multitude of lifting and control devices. Because of the redundancy in ways to generate moments and forces, there are a variety of strategies for trimming each airplane. A linear optimum trim solution (LOTS) is derived using a Lagrange formulation. LOTS enables the rapid calculation of the longitudinal load distribution resulting in the minimum trim drag in level, steady-state flight for airplanes with a mixture of three or more aerodynamic surfaces and propulsive control effectors. Comparisons of the trim drags obtained using LOTS, a direct constrained optimization method, and several ad hoc methods are presented for vortex-lattice representations of a three-surface airplane and two-surface airplane with thrust vectoring. These comparisons show that LOTS accurately predicts the results obtained from the nonlinear optimization and that the optimum methods result in trim drag reductions of up to 80 percent compared to the ad hoc methods.

Goodrich, Kenneth H.↗
DOE OSTI2012

Angle performance on optima MDxt

Angle control on medium current implanters is important due to the high angle-sensitivity of typical medium current implants, such as halo implants. On the Optima MDxt, beam-to-wafer angles are controlled in both the horizontal and vertical directions. In the horizontal direction, the beam angle is measured through six narrow slits, and any angle adjustment is made by electrostatically steering the beam, while cross-wafer beam parallelism is adjusted by changing the focus of the electrostatic parallelizing lens (P-lens). In the vertical direction, the beam angle is measured through a high aspect ratio mask, and any angle adjustment is made by slightly tilting the wafer platen prior to implant. A variety of tests were run to measure the accuracy and repeatability of Optima MDxt's angle control. SIMS profiles of a high energy, channeling sensitive condition show both the cross-wafer angle uniformity, along with the small-angle resolution of the system. Angle repeatability was quantified by running a channeling sensitive implant as a regular monitor over a seven month period and measuring the sheet resistance-to-angle sensitivity. Even though crystal cut error was not controlled for in this case, when attributing all Rs variation to angle changes, the overall angle repeatability was measured as 0.16 Degree-Sign (1{sigma}). A separate angle repeatability test involved running a series of V-curves tests over a four month period using low crystal cut wafers selected from the same boule. The results of this test showed the angle repeatability to be <0.1 Degree-Sign (1{sigma}).

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Characterizing the Defense Hierarchy of Populus trichocarpa

The U.S. Departments of Energy and Agriculture are developing bioenergy crops as a sustainable alternative to traditional fossil fuels. Plant disease threatens this effort by inhibiting the efficient production of plant feedstocks for bioenergy. In particular, biotrophic Melampsora leaf rust pathogens can increase morbidity in Populus trichocarpa and its hybrids (aka poplars), the primary woody feedstocks for bioenergy. Controlling rust disease in plantations is thus critical to the success of the poplar bioenergy program. Current efforts to control rust disease focus on plant genetic resistance. However, with novel pathogenic variation generated by the global movement of pathogens and their hybridization, it is increasingly clear that controlling rust disease in a long-lived plant like Populus depends on our ability to understand and manage not only genes for rust resistance, but also short-lived plant microorganisms that contribute to defense against rust (aka “defense mutualists”). Our proposed research thus seeks to develop an integrative, hierarchical model of P. trichocarpa defense that integrates genetic resistance and defense mutualists. Our overarching hypothesis is that defense against Melampsora rust is biologically degenerate, with major and minor plant resistance genes, plant defense compounds, and defense mutualists within the microbiome each contributing to rust resistance under different circumstances. The specific aims of our study will test the placement of each of these factors in the defense hierarchy. Ultimately, it is our hope that disease management strategies harnessing both resistance genes and naturally occurring defense mutualists of P. trichocarpa, and an appreciation of the ecological circumstances in which each is effective, will maximize plant resistance and productivity while minimizing impacts on the surrounding ecological landscape.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1980

Studies of high latitude current systems using Magsat vector data

Disturbance fields caused by global external current systems are analyzed in order to gain an improved understanding of the phydical processes which control high latitude current systems and to increase the confidence level in the identification of internal field levels. The basic approach is to: (1) categorize the vector data by those physical parameters important for investigation of external current systems; (2) map the disturbances for appropriate conditions; (3) model the currents which might cause the mapped disturbances; and (4) correlate results with data from other sources. It is concluded that the Magsat data set appears to have remarkably high precision and quality and should permit major advances to be made in modeling current distribution at high latitudes in the ionosphere and magnetosphere.

Burrows, J. R.↗
NASA NTRS1981

Studies of high latitude current systems using MAGSAT vector data

The magnetic disturbance fields caused by global external current systems are considered with particular emphasis on improving the understanding of the physical processes which control high latitude current systems. Following processing the MAGSAT data were routinely plotted in the Universal Time (UT) format as well as in a polar plot format. The H'D'U' coordinate system, was adopted as the standard for representing the MAGSAT residual magnetic field vectors. A data file was generated and the TPOLAR computer code was developed to determine from the orbital elements, the time, latitude, and MLT of the extremum latitude of each transpolar segment of orbit. The precision of the vector data set from MAGSAT prompted an extended exploratory phase for data analysis procedures, modeling techniques and phenomenology.

Burrows, J. R.↗
NASA NTRS1984

Rendezvous and docking with remote piloted vehicles

The man-in-the-loop control system requirements for the Orbital Maneuvering Vehicle (OMV) are examined. Since many similarities exist between the Teleoperator Retrieval System (TRS) and the unfolding OMV concept, a review of the TRS control system baseline along with selected design trades which led to that baseline are discussed. TRS program issues relevant to the man-in-the-loop control system design include thruster size, communication delays and TV bandwidth compression, range/range rate radar, tumbling targets, shimmed docking interface, and control system definition. A TRS vs. OMV simulation comparative study is summarized, and the major issues currently facing the control system designer on OMV are discussed.

Micheal, J. D.↗
NASA NTRS1984

The development of a microprocessor-controlled linearly-actuated valve assembly

The development of a proportional fluid control valve assembly is presented. This electromechanical system is needed for space applications to replace the current proportional flow controllers. The flow is controlled by a microprocessor system that monitors the control parameters of upstream pressure and requested volumetric flow rate. The microprocessor achieves the proper valve stem displacement by means of a digital linear actuator. A linear displacement sensor is used to measure the valve stem position. This displacement is monitored by the microprocessor system as a feedback signal to close the control loop. With an upstream pressure between 15 and 47 psig, the developed system operates between 779 standard CU cm/sec (SCCS) and 1543 SCCS.

Wall, R. H.↗
NASA NTRS1992

An optimal controller for an electric ventricular-assist device: theory, implementation, and testing

This paper addresses the development and testing of an optimal position feedback controller for the Penn State electric ventricular-assist device (EVAD). The control law is designed to minimize the expected value of the EVAD's power consumption for a targeted patient population. The closed-loop control law is implemented on an Intel 8096 microprocessor and in vitro test runs show that this controller improves the EVAD's efficiency by 15-21%, when compared with the performance of the currently used feedforward control scheme.

Therapy, Computer-Assisted/standards↗
DOE OSTI2019

Some Mathematical Problems of Control of Quantum Systems

Currently, quantum technologies are actively developing; these technologies are based on quantum effects in individual quantum systems—atoms or molecules. The mathematical study of problems of control of quantum systems is of particular importance. In this paper, we consider certain problems associated with control of quantum systems: extrema of target functionals for population transfer problems and generation of unitary processes and incoherent control and generation of arbitrary density matrices for open quantum systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Heat flow enhancement in a nanoscale plasmonic junction induced by Kondo resonances and electron-phonon coupling

Here recently, we showed that plasmon-exciton coupling can increase entropy current through a bridge coupled to plasmonic metal nanoparticles. Here we show that electron-phonon coupling can also be used to control the entropy current in similar systems. Entropy current tends to decrease due to electron-phonon coupling and to exhibit a monotonous decrease upon temperature ramping. However, an anomaly affecting the current where it is enhanced by electron-phonon coupling is indicated at around 42 times the system's Kondo temperature. We therefore report means to control heat flow by tuning the Kondo resonance through the electron-phonon coupling. We analyze the conditions that bring about these trends due to electron-phonon coupling by employing non-equilibrium Green's function formulation addressing the entropy current and the derived heat flow.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Chiral edge currents for ac-driven skyrmions in confined pinning geometries

In this work, we show that ac-driven skyrmion lattices in a weak pinning channel confined by regions of strong pinning exhibit edge transport carried by skipping orbits while skyrmions in the bulk of the channel undergo localized orbits with no net transport. The magnitude of the edge currents can be controlled by varying the amplitude and frequency of the ac drive or by changing the ratio of the Magnus force to the damping term. We identify a localized phase in which the orbits are small and edge transport is absent, an edge transport regime, and a fluctuating regime that appears when the ac drive is strong enough to dynamically disorder the skyrmion lattice. We also find that in some cases, multiple rows of skyrmions participate in the transport due to a drag effect from the skyrmion-skyrmion interactions. The edge currents are robust for finite disorder and should be a general feature of skyrmions interacting with confined geometries or inhomogeneous disorder under an ac drive. We show that similar effects can occur for skyrmion lattices at interfaces or along domain boundaries for multiple coexisting skyrmion species. The edge current effect provides a new method to control skyrmion motion, and we discuss the connection of these results with recent studies on the emergence of edge currents in chiral active matter systems and gyroscopic metamaterials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Lead, mercury, and cadmium exposure and attention deficit hyperactivity disorder in children

Background: There is limited research examining the relationship between lead (Pb) exposure and medically diagnosed attention deficit hyperactivity disorder (ADHD) in children. The role of mercury (Hg) and cadmium (Cd) exposures in ADHD development is even less clear. Objectives: To examine the relationship between Pb, Hg, and Cd and ADHD in children living inside and outside a Lead Investigation Area (LIA) of a former lead refinery in Omaha, NE. Methods: We carried out a case-control study with 71 currently medically diagnosed ADHD cases and 58 controls from a psychiatric clinic and a pediatric clinic inside and outside of the LIA. The participants were matched on age group (5–8, 9–12 years), sex, race (African American or Caucasians and others), and location (inside or outside LIA). We measured whole blood Pb, total Hg, and Cd using inductively coupled plasma mass spectrometry. Results: Inside the LIA, the 27 cases had blood Pb geometric mean (GM) 1.89 µg/dL and the 41 controls had 1.51 µg/dL. Outside the LIA, the 44 cases had blood Pb GM 1.02 µg/dL while the 17 controls had 0.97 µg/dL. After adjustment for matching variables and maternal smoking, socioeconomic status, and environmental tobacco exposure, each natural log unit blood Pb had an odds ratio of 2.52 with 95% confidence interval of 1.07–5.92. Stratification by the LIA indicated similar point estimate but wider CIs. No associations were observed for Hg or Cd. Conclusions: Postnatal Pb exposure may be associated with higher risk of clinical ADHD, but not the postnatal exposure to Hg or Cd. -- Highlights: • Blood Pb levels are associated with ADHD diagnosis in children. • No association was found between blood Cd or Hg levels and ADHD. • Children living close to hazardous waste site need to reduce metal exposure.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Thoughts and Hypotheses on the Metrics and Needs for the Stability of Highly Inverter-Based Island Systems

As levels of wind, photovoltaics (PVs), and battery energy storage on power systems rise, it is useful to be able to quickly compare how much generation (instantaneous power and annual energy) comes from these inverter-based resources (IBRs). A commonly used metric is the percentage of inverter-based generation (% IBR) in a dispatch scenario (as a percentage of the total generation or total load), which can be useful for estimating when certain operational challenges arise (high rates of change of frequency, underdamped control interactions, low system strength, low fault current availability, and so on). Another similar and commonly used metric pioneered on the relatively large island of Ireland, system nonsynchronous penetration (SNSP), is similar to the % IBR and is subject to similar limitations. SNSP has the advantage of handling high-voltage dc in a defined way.

fault currents↗
DOE OSTI2025

Design and Fabrication of a Thyristor Using Ion Implantation of Anode and Cathode

A thyristor is a solid-state semiconductor switch made up of four alternating p and n type layers. When the switch is turned on by a small pulse, current can flow as long as the device stays on. When the voltage drops below the turn on level or the current reverses, the switch will turn off. Thyristors only allow current to flow in one direction. One of the benefits of a thyristor device is in its capacity to conduct large voltages with a small device and a small turn-on pulse requirement. Another distinguishing feature of thyristors compared to other semiconductor devices is that it can only be in the on or off state, there’s no in-between state for the device to exist within. These properties make thyristors very useful as switch devices, especially in applications where current flow is only needed in one direction and could potentially be damaging in the opposite direction. Currently, thyristors are most commonly used to control very high power loads and they are available commercially in many designs to control different amounts of current.

42 ENGINEERING↗
NASA NTRS1976

The Tethered Balloon Current Generator - A space shuttle-tethered subsatellite for plasma studies and power generation

The objectives of the Tethered Balloon Current Generator experiment are to: (1) generate relatively large regions of thermalized, field-aligned currents, (2) produce controlled-amplitude Alfven waves, (3) study current-driven electrostatic plasma instabilities, and (4) generate substantial amounts of power or propulsion through the MHD interaction. A large balloon (a diameter of about 30 m) will be deployed with a conducting surface above the space shuttle at a distance of about 10 km. For a generally eastward directed orbit at an altitude near 400 km, the balloon, connected to the shuttle by a conducting wire, will be positive with respect to the shuttle, enabling it to collect electrons. At the same time, the shuttle will collect positive ions and, upon command, emit an electron beam to vary current flow in the system.

Williamson, P. R.↗