Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

AGGREGATE: dAta-driven modelinG preservinG contRollable dEr for outaGe mAnagemenT and rEsiliency (Report for Task 11 & 12: Components and Capabilities of the Resiliency Driven Outage Management and Feeder Restoration System (Deliverable D8))

This report provides progress update for the development of a outage management, feeder restoration, and restoration action feasibility check modules as part of the AGGREGATE project. Details for integration with controllability module, data driven situational awareness of network and distributed energy resources as well cyber security plan for these modules integrated with GE ADMS are also presented in the report. These three modules for outage management, feeder restoration, and restoration action feasibility check modules are developed in MATLAB and validated with a modified IEEE 123-node feeder. Results demonstrate ability of these new modules to improve the restoration process post-disaster to enhance the system resilience.

42 ENGINEERING↗

Aerodynamic Loads at Mach Numbers from 0.70 to 2.22 on an Airplane Model Having a Wing and Canard of Triangular Plan Form and Either Single or Twin Vertical Tails Supplement I-Tabulated Data for the Model with Single Vertical Tails: Tabulated Data for the Model with Single Vertical Tail - Supplement 1

Tabulated results of a wind-tunnel investigation of the aerodynamic loads on a canard airplane model with a single vertical tail are presented for Mach numbers from 0.70 to 2.22. The Reynolds number for the measurements was 2.9 x 10(exp 6) based on the wing mean aerodynamic chord. The results include local static pressure coefficients measured on the wing, body, and vertical tail for angles of attack from -4 deg to + 16 deg, angles of sideslip of 0 deg and 5.3 deg, vertical-tail settings of 0 deg and 5 deg, and nominal canard deflections of 0 deg and 10 deg. Also included are section force and moment coefficients obtained from integrations of the local pressures and model-component force and moment coefficients obtained from integrations of the section coefficients. Geometric details of the model and the locations of the pressure orifices are shown. An index to the data contained herein is presented and definitions of nomenclature are given.

Peterson, Victor L.↗

Characterizing volumetric strain at Brady Hot Springs, Nevada, USA using geodetic data, numerical models and prior information

The geothermal field at Brady Hot Springs, Nevada has subsided over the past decade. Between 2004 and 2014, the rate of downward-vertical displacement was on the order of 10 mm yr -1 , as measured by two independent geodetic techniques: interferometric synthetic aperture radar (InSAR) and Global Positioning System. The observed deformation field forms an approximately elliptical bowl that is 4 km long and aligned with the trace of the NNE striking normal fault system. We use modelling to estimate the plausibility of pressure changes or thermal contraction as the cause of the observed subsidence. As a result, Bayesian inference favours with ‘very strong evidence’ thermal contraction over other hypotheses as the dominant driving mechanism for the observed subsidence. Using InSAR data spanning from 2016 July 22 to 2017 August 22, we estimate the volume change rate in the significantly deforming volume to be (-29 ± 3) thousand m 3 yr -1 and the total rate of change in thermal energy between -53 and -79 MW. We infer the total volume of cubes where the estimated volumetric strain rate is significantly different from zero with 95 per cent confidence to be 119 million m 3 . We find that the main region of significant cooling occurs between the injection and production well locations. This result supports the idea that highly permeable conduits along faults channel fluids from shallow aquifers to the deep reservoir tapped by the production wells.

15 GEOTHERMAL ENERGY↗

Flight Acoustic Testing and For the Rotorcraft Noise Data Acquisition Model (RNM)

Two acoustic flight tests have been conducted on a remote test range at Eglin Air Force Base in the panhandle of Florida. The first was the "Acoustics Week" flight test conducted in September 2003. The second was the NASA Heavy Lift Rotorcraft Acoustics Flight Test conducted in October-November 2005. Benchmark acoustic databases were obtained for a number of rotorcraft and limited fixed wing vehicles for a variety of flight conditions. The databases are important for validation of acoustic prediction programs such as the Rotorcraft Noise Model (RNM), as well as for the development of low noise flight procedures and for environmental impact assessments. An overview of RNM capabilities and a detailed description of the RNM/ART (Acoustic Repropagation Technique) process are presented. The RNM/ART process is demonstrated using measured acoustic data for the MD600N. The RNM predictions for a level flyover speed sweep show the highest SEL noise levels on the flight track centerline occurred at the slowest vehicle speeds. At these slower speeds, broadband noise content is elevated compared to noise levels obtained at the higher speeds. A descent angle sweep shows that, in general, ground noise levels increased with increasing descent rates. Vehicle orientation in addition to vehicle position was found to significantly affect the RNM/ART creation of source noise semi-spheres for vehicles with highly directional noise characteristics and only mildly affect those with weak acoustic directionality. Based on these findings, modifications are proposed for RNM/ART to more accurately define vehicle and rotor orientation.

Burley, Casey L.↗

Measurements and IRI Model Predictions During the Recent Solar Minimum

Cycle 23 was exceptional in that it lasted almost two years longer than its predecessors and in that it ended in an extended minimum period that proved all predictions wrong. Comparisons of the International Reference Ionosphere (IRI) with CHAMP and GRACE in-situ measurements of electron density during the minimum have revealed significant discrepancies at 400-500 km altitude. Our study investigates the causes for these discrepancies with the help of ionosonde and Planar Langmuir Probe (PLP) data from the Communications/Navigation Outage Forecasting System (C/NOFS) satellite. Our C/NOFS comparisons confirm the earlier CHAMP and GRACE results. But the ionosonde measurements of the F-peak plasma frequency (foF2) show generally good agreement throughout the whole solar cycle. At mid-latitude stations yearly averages of the data-model difference are within 10% and at low latitudes stations within 20%. The 60-70% differences found at 400-500 km altitude are not seen at the F peak. We will discuss how these seemingly contradicting results from the ionosonde and in situ data-model comparisons can be explained and which parameters need to be corrected in the IRI model.

Bilitza, Dieter↗

Space shuttle plume/simulation application: Results and math model supersonic data

The analysis of pressure and gage wind tunnel data from space shuttle wind tunnel test IA138 was performed to define the aerodynamic influence of the main propulsion system and solid rocket booster plumes on the total vehicles, elements, and components of the space shuttle vehicle during the supersonic portion of ascent flight. A math model of the plume induced aerodynamic characteristics was developed for a range of Mach numbers to match the forebody aerodynamic math model. The base aerodynamic characteristics are presented in terms of forces and moments versus attitude. Total vehicle base and forebody aerodynamic characteristics are presented in terms of aerodynamic coefficients for Mach numbers from 1.55 to 2.5.

Boyle, W.↗

Integrating Wind Profiling Radars and Radiosonde Observations with Model Point Data to Develop a Decision Support Tool to Assess Upper-Level Winds for Space Launch

On the day of launch, the 45th Weather Squadron (45 WS) Launch Weather Officers (LWOs) monitor the upper-level winds for their launch customers. During launch operations, the payload/launch team sometimes asks the LWOs if they expect the upper-level winds to change during the countdown. The LWOs used numerical weather prediction model point forecasts to provide the information, but did not have the capability to quickly retrieve or adequately display the upper-level observations and compare them directly in the same display to the model point forecasts to help them determine which model performed the best. The LWOs requested the Applied Meteorology Unit (AMU) develop a graphical user interface (GUI) that will plot upper-level wind speed and direction observations from the Cape Canaveral Air Force Station (CCAFS) Automated Meteorological Profiling System (AMPS) rawinsondes with point forecast wind profiles from the National Centers for Environmental Prediction (NCEP) North American Mesoscale (NAM), Rapid Refresh (RAP) and Global Forecast System (GFS) models to assess the performance of these models. The AMU suggested adding observations from the NASA 50 MHz wind profiler and one of the US Air Force 915 MHz wind profilers, both located near the Kennedy Space Center (KSC) Shuttle Landing Facility, to supplement the AMPS observations with more frequent upper-level profiles. Figure 1 shows a map of KSC/CCAFS with the locations of the observation sites and the model point forecasts.

Bauman, William H., III↗

Penetration Electric Fields and Inner Magnetosphere Dynamics: A Model and Data Comparison

Significant progress has been made on the analysis of the June, 1991 storm. We have completed the analysis of the CRRES and DMSP data sets. We have been able to follow the evolution during the storm of the inner edge of the electric field patterns in the dusk sector and its relation to electron boundaries, ion boundaries and the ring current. Whereas the CRRES data provide radial cuts out through the plasmasphere every I 0 hours, DMSP provides snapshots every orbit of the potential and particle boundaries. Electric field and energetic particle measurements from CRRES and ion drifts and energetic particle measurements from DMSP provide the principal data sets. The combined data set provides high resolution definition of the boundary motions over the phases of the storm. L shell differences between the DMSP and CRRES particle boundaries are easily explained by inflation of the dusk sector by the ring current. The electric field boundaries are typically associated with the ion boundary and the inner edge of the ring current except during rapid increases in the cross-polar cap potential. A significant fraction of the dusk cell potential is found inside the plasmasheet electron inner edge. Twice during the storm this potential exceeded 60 kV. A paper (copy attached) has been prepared (Burke et al., 1998) and submitted to JGR. An invited paper will be presented by Burke at the spring AGU meeting. An abstract has also been submitted to the COSPAR meeting for presentation by Maynard. New simulations have been carried out with the Rice Convection Model for the magnetic storm of June 4-5, 1991, and comparisons have been made with CRRES and DMSP data.

Maynard, Nelson C.↗

Validation and Verification for INL Modelica-based TEDS models Via Experimental Results

This report provides an overview on the verification and validation (V&V) of the Thermal Energy Distribution System (TEDS) model developed in the Modelica process modeling ecosystem using experimental data. Model development has led to the creation of a dynamic process model of the experimental TEDS facility housed within the Energy Systems Laboratory (ESL) at Idaho National Laboratory (INL). The model was then used during the preconstruction phase of the experimental effort to inform experimental design (e.g., insulation requirements, bypass line placement, expected performance of components) and to test innovative control schemes prior to the initial operation. The TEDS model developed in Modelica includes the primary components of the TEDS experimental unit: a 200kW Chromalox heater; a single-tank packed-bed thermal energy storage system filled with 0.125-inch alumina (Al2O3) beads; an ethylene-glycol-to-Therminol-66 heat exchanger; system piping; five control valves; and all associated temperature, pressure, and volumetric flow sensors. Using the Institute of Electrical and Electronics Engineers (IEEE) V&V methodologies, considered the gold standard in the engineering field, the model was verified using a combination of static analysis, spatial convergence, and regression tests. Then using dynamic time warping (DTW) initial runs to validate and tune the TEDS model versus the experiment were conducted. This tuning method was accomplished using the INL Risk Analysis Virtual ENvironment (RAVEN) software package. Tuning is required to account for physical phenomena that are less understood within the empirical heat transfer correlations. Through the commencement of this work, a systems-level model of TEDS with associated control systems, sensors, piping diameters, and component capabilities has been created. This model was utilized in the pre-experimental phase to inform system design, insulation thicknesses, and potential control schemes to operate the system effectively and safely. Then, initial experimental startup and operational data were used to demonstrate the validation and tuning methodology. This process demonstrates the classical two-step approach of a model informing experimental design followed by the experiment validation and tuning the model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Transportation Leapfrog: Using Smart Phones to Collect Driving Data and Model Fuel Economy in India

Car ownership in India is expected to skyrocket in the coming decades, strongly driven by rising incomes. This phenomenon provides unprecedented opportunities for automakers and equally unprecedented social and environmental challenges. Policymakers, urban planners and civil society see this car boom leading to an explosion in problems related to congestion, infrastructure, air pollution, safety, higher oil imports and climate change. For all these stakeholders to take effective action, good data on how people use their cars, their demand for mobility and their behavior in mobility is essential. Unfortunately, there is very little data on the Indian transport sector as a whole and virtually none on real-world vehicle performance and use. The rapid development of high quality mobile telecommunications infrastructure provides India with the opportunity to leapfrog the West in cheaply collecting vast amounts of useful data from transportation. In this paper, we describe a pilot project in which we use commercial smart phone apps to collect per second car driving data from the city of Pune, instantly upload it through 3G and prepare it for analysis using advanced noise filtering algorithms for less than $1 per day per car. We then use our data in an Autonomie simulation to show that India’s currently planned fuel economy test procedures will result in over-estimates of fuel economy of approximately 35% for a typical Indian car when it is operated in real world conditions. Supporting better driving cycle development is just one of many applications for smart phone derived data in Indian transportation.

25 ENERGY STORAGE↗

Interferometric SAR modelling of near surface data to improve geological model in the Surat Basin, Australia

Here we present a study on geophysical inverse modelling for subsurface structural properties of an unconventional hydrocarbon site that was monitored previously by Interferometric Synthetic Aperture Radar (InSAR) technology for surface deformation. A static three-dimensional geomodel along with extracted property maps replicates the depth of each underlying stratigraphic unit and structural feature with the density of each geological layer. We examine the hypothesis that integration of elastic properties of each formation layer with InSAR observations in a stratified elastic medium will lead to a viscoelastic geophysical inverse problem that can be solved to estimate fractional volume change at the reservoir level. Moreover, we examine synthetic scenarios in which the elastic properties of the formations are perturbed before determining the resulting impact on the rate of surface deformation. The results show that although the slope of underlying formations, their density and depth can define the extent and pattern of a deformation signal, their properties have a marginal impact on volumetric change compared to the dense network of shallow depth Coal Seam Gas (CSG) mining wells. Besides, it is also demonstrated that the inversion of InSAR deformation maps can resolve the uncertainties associated with low-resolution seismic interpretation as well as filling the data gaps within seismic acquisitions. A significant contribution of this investigation to the geological basin modelling involves a) introducing a remote and non-invasive technology such as InSAR to improve geophysical mapping of subsurface structures such as faults in areas with sparse or no reflective seismic information, and b) applying a multi-layer viscoelastic geophysical source model for an unconventional hydrocarbon reservoir such as CSG.

58 GEOSCIENCES↗

Open Automated Demand Response Communications Specification (Version 1.0)

The development of the Open Automated Demand Response Communications Specification, also known as OpenADR or Open Auto-DR, began in 2002 following the California electricity crisis. The work has been carried out by the Demand Response Research Center (DRRC), which is managed by Lawrence Berkeley National Laboratory. This specification describes an open standards-based communications data model designed to facilitate sending and receiving demand response price and reliability signals from a utility or Independent System Operator to electric customers. OpenADR is one element of the Smart Grid information and communications technologies that are being developed to improve optimization between electric supply and demand. The intention of the open automated demand response communications data model is to provide interoperable signals to building and industrial control systems that are preprogrammed to take action based on a demand response signal, enabling a demand response event to be fully automated, with no manual intervention. The OpenADR specification is a flexible infrastructure to facilitate common information exchange between the utility or Independent System Operator and end-use participants. The concept of an open specification is intended to allow anyone to implement the signaling systems, the automation server or the automation clients.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Exploring data-driven modeling of boundary layer transition

Prediction of laminar-turbulent transition in boundary layer flows is an important component of predicting the aerodynamic performance of a number of aerospace configurations. According to the CFD Vision 2030 [1], transition modeling represents acriticalarea in CFD simulation capability that will remain a pacing item for the foreseeable future. The fact thattransition can take placevia either one of a myriad possible paths adds to the challenges inreliable transition predictions, despite a limited knowledge of the relevant input parameters. In the low disturbance environments typical of flight applications, transition is often initiated by small amplitude disturbances in the form of linear instability waves of the laminar boundary layer. These disturbances amplify linearly at first and eventually undergo a sequence of nonlinear interactions that result in transition to turbulence. Because the nonlinear phase is rather rapid, the amplification of boundary layer instabilities is governed by the linearstability theory over a majority of the distance leading up to the onset of transition. Semi-empirical transition correlations based on the linear stability theory have been successful in explaining the observed trends in transition location within a broad class of flows. However, the application of stability theory is highly non-robust and often requires a significant domain expertise. Recent work at the NASA Langley Research Center has beenaimed at bridging the gap between physics based transition analyses such as those based on linear stability theory and practical applications that require transition prediction by users that may not be well versed in transition physics. The applications of deep learning have been at the center of these efforts. This presentation will focus on the progress achieved thus far, highlighting the applications of neural networks to selectedtransition scenarios across a range of Mach numbers and flow configuration, as well as the lessons learnedand remaining challengeswithrespect to the selection of training data and neural networks architectures, hyperparameter tuning, and the physical insights distilled from the otherwise black-box models.

M. R. Malik↗

Charged-particle angular correlations in XeXe collisions at s N N = 5.44 TeV

Azimuthal correlations of charged particles in xenon-xenon collisions at a center-of-mass energy per nucleon pair of $\sqrt{s_{NN}}=5.44$ TeV are studied. The data were collected by the CMS experiment at the LHC with a total integrated luminosity of 3.42μb -1 . The collective motion of the system formed in the collision is parametrized by a Fourier expansion of the azimuthal particle density distribution. The azimuthal anisotropy coefficients $v_2$, $v_3$, and $v_4$ are obtained by the scalar-product, two-particle correlation, and multiparticle correlation methods. Within a hydrodynamic picture, these methods have different sensitivities to noncollective and fluctuation effects. The dependence of the Fourier coefficients on the size of the colliding system is explored by comparing the xenon-xenon results with equivalent lead-lead data. Model calculations that include initial-state fluctuation effects are also compared to the experimental results. The observed angular correlations provide new constraints on the hydrodynamic description of heavy ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An Advanced Open-Source Platform for Air Quality Analysis, Visualization, and Prediction

Ambient air pollution is the largest environmental health risk factor, leading to several million premature deaths globally per year. The challenge of combating poor air quality is exacerbated by growing urban populations, changing emissions, and a warming climate. While there have been many advances monitoring and modeling of atmospheric composition, reflected in the dramatic increase in archived Earth Observations, there is no single measurement or method that alone can provide an accurate depiction of the entire atmosphere. The rapidly growing collections of observational and modeling data require us to be smarter about what data to include, and how such data is used. In recent years, NASA has invested significantly in advancing the concepts for Analytics Collaborative Framework (ACF) [5] and New Observing Strategies (NOS) [4] to tackle our software infrastructure need for harmonized data management and dynamic acquisition of diverse measurements for on-demand, interactive, multivariate analysis, and access [3]. It is not enough to have a big data, standalone analytics solution; it is critical that we start integrating data from remote sensing, modeling, and in-situ networks in a harmonized manner that enables timely and data-driven decision-making for air quality management. This work presents the design and development of an Air Quality Analytics Collaborative Framework (AQ ACF), as part of NASA’s Advanced Information Systems Technology (AIST) effort, to establish a data, machine-learning, and numerically driven platform for air quality analysis, visualization, and prediction.

Liu, Qian↗

FACE-MDS Phase 2: Model Output

Model output from Phase 2 of the Free Air CO2 Enrichment Model Data Synthesis (FACE-MDS) project. Results from 12 models simulating six elevated CO2 experiments using the protocols, met data, and other data supplied in the accompanying dataset: Phase 2 Free Air CO2 Enrichment Model-Data Synthesis: Meteorological Data and Protocols. File naming convention can be found in the file 'facemds-file-table-modeldata.xml' and information about variable naming convention can be found in the file 'facemds-standard-name-table-modvars.xml'. We followed the ALMA v3 convention for meteorological variables and developed a hierarchical naming scheme for ecosystem variables. Additional info can be found in the protocols in the accompanying meteorological dataset (doi:10.15485/1480328). We replaced the original naming convention mentioned in the protocol with the one described in 'facemds-standard-name-table-modvars.xml'.

54 ENVIRONMENTAL SCIENCES↗

Meld: Exploring the Feasibility of a Framework-less Framework

HEP data-processing frameworks are essential ingredients in getting from raw data to physics results. But they are often tricky to use well, and they present a significant learning barrier for the beginning HEP physicist. In addition, existing frameworks typically support rigid, collider-based data models, which do not map well to neutrino-physics experiments like DUNE. Neutrino physicists thus expend significant effort working around framework limitations instead of using a framework that directly supports their needs. Presented here is Meld, a Fermilab R&D project, which intends to address these limitations. By leveraging modern C++ capabilities, state-of-the-art concurrency libraries, and a flexible data model, it is possible for beginning (and seasoned) HEP physicists to execute framework programs easily and efficiently, with minimal coupling to framework-specific constructs. Meld aims to directly support the frameworks needs of neutrino experiments like DUNE as well as the more common collider-based experiments.

Knoepfel, Kyle J.↗