Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed energy source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Hexagonal uniformly redundant arrays for coded-aperture imaging

Uniformly redundant arrays are used in coded-aperture imaging, a technique for forming images without mirrors or lenses. This technique is especially important for the high energy X-ray and gamma-ray region above 20 kev. In this technique, a mask consisting of opaque (closed) and trasparent (open) areas is placed between the photon sources to be imaged and a position sensitive detector or a detector array. Each source casts a shadow pattern of the mask or aperture onto the detector. This shadow pattern may be viewed as an encoded signal for that source direction. If each possible source code is unique, the detected composite of overlapping shadow patterns may be decoded to produce an image of the source distribution.

Finger, M. H.↗
NASA NTRS1987

Point source solutions and coupling parameters in cratering mechanics

The use of a point source of an impactor energy and momentum to replace the effects of the impactor is examined. The general framework and notation of the impact cratering problems are described; it is determined that the cratering phenomena are governed by Froude, Cauchy, and Reynolds numbers. The coupling parameter concept is defined mathematically as the measure that governs limit point source solutions. Examples of cases where coupling parameters are used are presented. The relationships of the coupling parameter concept with steady flow and the Z-model of cratering of Maxwell (1973, 1977) are studied. Crater size, ejecta distributions, growth histories, time of formation, melt volume, and shock decay for various scale factors for impact cratering mechanics are calculated, and the applicability of the coupling parameter to the study of cratering mechanics is revealed.

Holsapple, K. A.↗
NASA NTRS2001

Ultraviolet Broad Absorption Features and the Spectral Energy Distribution of the QSO PG 1351+641

We present a moderate-resolution (approximately 20 km/s) spectrum of the broad-absorption line QSO PG 1351+64 between 915-1180 angstroms, obtained with the Far Ultraviolet Spectroscopic Explorer (FUSE). Additional low-resolution spectra at longer wavelengths were also obtained with the Hubble Space Telescope (HST) and ground-based telescopes. Broad absorption is present on the blue wings of C III lambda977, Ly-beta, O VI lambda-lambda-1032,1038, Ly-alpha, N V lambda-lambda-1238,1242, Si IV lambda-lambda-1393,1402, and C IV lambda-lambda-1548,1450. The absorption profile can be fitted with five components at velocities of approximately -780, -1049, -1629, -1833, and -3054 km/s with respect to the emission-line redshift of z = 0.088. All the absorption components cover a large fraction of the continuum source as well as the broad-line region. The O VI emission feature is very weak, and the O VI/Ly-alpha flux ratio is 0.08, one of the lowest among low-redshift active galaxies and QSOs. The ultraviolet continuum shows a significant change in slope near 1050 angstroms in the restframe. The steeper continuum shortward of the Lyman limit extrapolates well to the observed weak X-ray flux level. The absorbers' properties are similar to those of high-redshift broad absorption-line QSOs. The derived total column density of the UV absorbers is on the order of 10(exp 21)/s, unlikely to produce significant opacity above 1 keV in the X-ray. Unless there is a separate, high-ionization X-ray absorber, the QSO's weak X-ray flux may be intrinsic. The ionization level of the absorbing components is comparable to that anticipated in the broad-line region, therefore the absorbers may be related to broad-line clouds along the line of sight.

Zheng, W.↗
NASA NTRS2007

INTEGRAL Observations of the Enigmatic Be Stars (gamma) Cassiopeiae and HD 110432

We present the results of a hard X-ray study of the Be stars gamma Cassiopeiae and HD 110432 based on observations made with the INTEGRAL observatory. These stars are known to be moderately strong, X-ray sources (L(sub x) approx. equal to = 10(sup 32)-10(sup 33) erg per second). These values are at the extreme high end of the known luminosity distribution for active coronal systems, but several orders of magnitude below typical X-ray binaries. The hard X-ray spectra for these systems are quite similar. They can be well fitted by either optically thin thermal plasma models with kT = 12.5 - 14 keV or a cutoff powerlaw + gaussian line model with photon indices in the 1.3 - 1.5 range and a line energy of 6.7 keV. The 20-50 keV light curves show no evidence for flaring and no significant evidence for periodic variability. It has been proposed that the X-ray emission is due to either accretion onto a white dwarf companion or magnetic activity near the surface of the Be star. We discuss in detail the pros and cons of each scenario towards explaining our spectral and temporal results. Given that both thermal and nonthermal models fit the data equally well, we cannot use the spectra to delineate between these two scenarios. Recent observations indicate that gamma Cas has a approx. 1 solar mass companion in a 203.59 day orbit. This is consistent with the white dwarf - Be star binary model but the lack of periodic modulation of the flux on this timescale calls this conclusion into question. On the other hand the lack of flaring activity may rule against the magnetic activity model. We discuss advances in observations and theory that need to be made to resolve the origin of these systems.

Sturner, S. J.↗
NASA NTRS2015

Open Rotor Noise Shielding by Blended-Wing-Body Aircraft

This paper presents an analysis of open rotor noise shielding by Blended Wing Body (BWB) aircraft by using model scale test data acquired in the Boeing Low Speed Aeroacoustic Facility (LSAF) with a legacy F7/A7 rotor model and a simplified BWB platform. The objective of the analysis is the understanding of the shielding features of the BWB and the method of application of the shielding data for noise studies of BWB aircraft with open rotor propulsion. By studying the directivity patterns of individual tones, it is shown that though the tonal energy distribution and the spectral content of the wind tunnel test model, and thus its total noise, may differ from those of more advanced rotor designs, the individual tones follow directivity patterns that characterize far field radiations of modern open rotors, ensuring the validity of the use of this shielding data. Thus, open rotor tonal noise shielding should be categorized into front rotor tones, aft rotor tones and interaction tones, not only because of the different directivities of the three groups of tones, but also due to the differences in their source locations and coherence features, which make the respective shielding characteristics of the three groups of tones distinctly different from each other. To reveal the parametric trends of the BWB shielding effects, results are presented with variations in frequency, far field emission angle, rotor operational condition, engine installation geometry, and local airframe features. These results prepare the way for the development of parametric models for the shielding effects in prediction tools.

Guo, Yueping↗
NASA NTRS2019

Diurnally Migrating Lunar Water: Evidence from Ultraviolet Data

Data from the Lunar Reconnaissance Orbiter Lyman Alpha Mapping Project and Diviner are consistent with surface water on the Moon varying in abundance with both terrain type and local time/temperature. A thermal desorption model including latitudinally varying desorption activation energy reproduces the observations. We interpret the observed variability in spectral slopes as water molecules in the uppermost lunar regolith (<1% of a monolayer) thermally adsorbing and desorbing from grains depending upon the local temperature and availability of chemisorption sites. The Lyman Alpha Mapping Project data also demonstrate that in the Earth's magnetotail, where the solar wind source of protons is absent, a decrease in H2O on the surface is not observed. This rules out a steady state process involving aprompt solar wind source and favors a migration mechanism for the distribution of adsorbed water onthe Moon.

Diurnally↗
NASA NTRS2021

A lingering local exopshere created by a gas plume of a lunar lander

We model the expected local exosphere created by outgassing from a lunar lander plume water deposit located adjacent to a lunar lander. We assume the landing is near dawn within Lacus Mortis at 45oN. We consider a set of water desorption scenarios especially focusing on the water-surface desorption activation energy that can possess a distribution of energy states. Our initial simulation starts with a deposition surface having 1020 water molecules per square meter in a 2 km × 2 km region where 90% of the water is retained by weak water-water sorption interactions and 10% are bound by water-regolith sorption interactions. We find that the loosely bound water molecules in water-water interactions quickly desorb within hours after landing. However, water molecules bound to surface sites having a desorption activation greater than 0.7 eV were found to be retained until the source region rotated to later local times (i.e., surface temperature becomes relatively high). We found such time-delayed desorption leads to a tenuous but lingering exosphere emitted from the lander plume deposit region for many 10's of hours after landing. We also adjusted the initial condition by considering different landing local times and considered a case where 100% of the water is bound by water-regolith interactions (mimicking a porous regolith).

W.M. Farrell↗
NASA NTRS2001

Ultraviolet Broad Absorption Features and the Spectral Energy Distribution of the QSO PG 1351+64

We present a moderate-resolution (approximately 20 km s(exp -1) spectrum of the mini broad absorption line QSO PG 1351+64 between 915-1180 A, obtained with the Far Ultraviolet Spectroscopic Explorer (FUSE). Additional low-resolution spectra at longer wavelengths were also obtained with the Hubble Space Telescope (HST) and ground-based telescopes. Broad absorption is present on the blue wings of C III (lambda)977, Ly(beta), O VI (lambda)(lambda)1032,1038, Ly(alpha), N V (lambda)(lambda)1238,1242, Si IV (lambda)(lambda)1393,1402, and C IV (lambda)(lambda)1548,1450. The absorption profile can be fitted with five components at velocities of approximately -780, -1049, -1629, -1833, and -3054 km s(exp -1) with respect to the emission-line redshift of z = 0.088. All the absorption components cover a large fraction of the continuum source as well as the broad-line region. The O VI emission feature is very weak, and the O VI/Ly(alpha) flux ratio is 0.08, one of the lowest among low-redshift active galaxies and QSOs. The UV (ultraviolet) continuum shows a significant change in slope near 1050 A in the restframe. The steeper continuum shortward of the Lyman limit extrapolates well to the observed weak X-ray flux level. The absorbers' properties are similar to those of high-redshift broad absorption-line QSOs. The derived total column density of the UV absorbers is on the order of 10(exp 21) cm(exp -2), unlikely to produce significant opacity above 1 keV in the X-ray. Unless there is a separate, high-ionization X-ray absorber, the QSO's weak X-ray flux may be intrinsic. The ionization level of the absorbing components is comparable to that anticipated in the broad-line region, therefore the absorbers may be related to broad-line clouds along the line of sight.

Zheng, W.↗
NASA NTRS1986

Field-aligned electron precipitation at the edge of an arc

Measurements of field-aligned electrons at the edge of an arc are presented from a sounding rocket flight through a quiet afternoon auroral arc. High time resolution measurements show the evolution of the electron distribution function over the 2.3-km width of field-aligned precipitation. A nearly constant 1.2-eV perpendicular temperature was found for these field-aligned fluxes over a broad range of parallel energies (100 - 900 eV). The small perpendicular temperature indicates that the acceleration region is located at a low altitude. Two models of cold plasma convection into the edge of a V-shaped potential structure are examined and found to be consistent with both the observed fluxes and spatial width of the edge precipitation. Both models predict an average source plasma density less than 130/cu cm to account for the observed field-aligned fluxes and thus an acceleration region well above 1000 km.

Mcfadden, J. P.↗
NASA NTRS1987

Martin Marietta atomic oxygen Low Earth Orbit (LEO) simulation

An atomic oxygen beam apparatus that produces flux levels and atomic kinetic energy similar to that encountered by spacecraft in low Earth orbit (LEO) is described. The beam apparatus consists of an electric discharge ion source, mass filter, decelerator, and neutralizer. Specific design goals include a 1.3 cm beam diameter, a 5 eV beam energy, and a flux density on the order of 10(15) cm(-2) s(-1). The total fluence will be on the order of 10(19) cm(-2) for an 8 hour test. The neutral oxygen beam will expose various materials contained within a large target chamber. Within the chamber will be a rather complex suite of instrumentation that will allow real-time studies of material mass loss and reactant species spatial distribution. In addition, a UV solar simulator will aid in the understanding of various synergistic effects.

Sjolander, Gary W.↗
NASA NTRS1999

Diagnostic for Plasma Enhanced Chemical Vapor Deposition and Etch Systems

In order to meet NASA's requirements for the rapid development and validation of future generation electronic devices as well as associated materials and processes, enabling technologies ion the processing of semiconductor materials arising from understanding etch chemistries are being developed through a research collaboration between Stanford University and NASA-Ames Research Center, Although a great deal of laboratory-scale research has been performed on many of materials processing plasmas, little is known about the gas-phase and surface chemical reactions that are critical in many etch and deposition processes, and how these reactions are influenced by the variation in operating conditions. In addition, many plasma-based processes suffer from stability and reliability problems leading to a compromise in performance and a potentially increased cost for the semiconductor manufacturing industry. Such a lack of understanding has hindered the development of process models that can aid in the scaling and improvement of plasma etch and deposition systems. The research described involves the study of plasmas used in semiconductor processes. An inductively coupled plasma (ICP) source in place of the standard upper electrode assembly of the Gaseous Electronics Conference (GEC) radio-frequency (RF) Reference Cell is used to investigate the discharge characteristics and chemistries. This ICP source generates plasmas with higher electron densities (approximately 10(exp 12)/cu cm) and lower operating pressures (approximately 7 mTorr) than obtainable with the original parallel-plate version of the GEC Cell. This expanded operating regime is more relevant to new generations of industrial plasma systems being used by the microelectronics industry. The motivation for this study is to develop an understanding of the physical phenomena involved in plasma processing and to measure much needed fundamental parameters, such as gas-phase and surface reaction rates. species concentration, temperature, ion energy distribution, and electron number density. A wide variety of diagnostic techniques are under development through this consortium grant to measure these parameters. including molecular beam mass spectrometry (MBMS). Fourier transform infrared (FTIR) spectroscopy, broadband ultraviolet (UV) absorption spectroscopy, a compensated Langmuir probe. Additional diagnostics. Such as microwave interferometry and microwave absorption for measurements of plasma density and radical concentrations are also planned.

Cappelli, Mark A.↗
NASA NTRSDate not supplied

Update on Planetary, Lunar, & Asteroid Natural Environment Testbed (PLANET)

At ISMSE15, the Planetary, Lunar, & Asteroid Natural Environment Testbed (PLANET) was introduced as an upcoming high-fidelity, combined-effects planetary surface environment laboratory. This year, we will present an update on the facility status, describing the procurement, installation, commissioning of the chamber in Huntsville, Alabama (USA). With NASA’s push to return to the Moon through the Artemis program, there is a clear need for more high-fidelity test chambers that can replicate multiple aspects of the lunar surface, especially the fine, dusty lunar soil known as regolith. The PLANET chamber is designed to fill this gap, enabling research & development, qualification, and verification testing in a combined lunar surface environment, at an affordable price, for government, commercial/industry, and academic partners. Features include a large regolith simulant bed, low energy electron and ion sources to replicate the solar wind, full-spectrum UV and Solar simulation, and a liquid nitrogen cryogenic shroud, all in a high-vacuum environment (as low as 10^-7 mbar). PLANET’s initial focus will be on the lunar environment, but other surface environments (Martian, asteroid, etc.) are also possible to simulate. Besides the environmental instrumentation, PLANET will be equipped with specialized test systems that the Space Environmental Effects Team has developed over the past two years, including an in-situ tribometer and uniform dust distribution system. The chamber is currently being manufactured, with plans to install in May 2024. This will be followed by outfitting and commissioning. The challenges and accomplishments seen during this process will be detailed, and data from the first tests performed in PLANET will be shared with the community.

environmental testing↗
NASA NTRS1978

Spectrophotometry of Seyfert 2 galaxies and narrow-line radio galaxies

Results are reported for a spectrophotometric survey of several Seyfert 2 galaxies, intermediate Seyferts, and narrow-line radio galaxies. The emission-line spectra of the galaxies are analyzed, emphasizing line intensities, reddening, temperatures, densities, line strength correlations, line widths, and redshift differences. The continuous spectra are examined, and possible ionization sources are considered. It is found that: (1) there are no distinguishing differences between the spectra of Seyfert 2 galaxies and narrow-line radio galaxies; (2) the emission spectra are rich in lines from a wide range of ionization levels; (3) the continuum is starlight diluted by an underlying continuous spectrum; (4) the line widths of both classes of galaxies have the same distribution; (5) there appear to be regions of high and low ionization in the Seyfert 2 and narrow-line radio galaxies; (6) photoionization seems quite likely as the energy input to the gas; and (7) all the galaxies show a UV excess in their spectra.

Koski, A. T.↗
NASA NTRS1980

Two-dimensional VLA maps of solar bursts at 15 and 23 GHz with arcsec resolution

Three small, impulsive solar-microwave bursts (peak fluxes 4.9, 3.0, and 0.4 sfu) were observed during 1979 September 7-9, using the Very Large Array (VLA) at 15.05 or 22.5 GHz. The data from 10 antennas distributed on three arms of the array provide the first two-dimensional burst images with spatial resolution as high as 1.0 x 0.75 arcsec. Comparison with optical data showed in the impulsive phase of all three flares, the microwave emission was dominated by a compact source located between the H-alpha kernels. In the post-impulsive phase, the microwave source was larger and elongated in a direction consistent with the orientation of the magnetic field lines joining the H-alpha kernels. These results are interpreted to imply that the initial energy release occurs near the top of the magnetic arch joining the H-alpha kernels.

Marsh, K. A.↗
NASA NTRS1984

Detection of a sub-milliarcsecond radio component in the RS CVn system HR 1099

The RS CVn system HR 1099 was observed with a five station VLBI array at a frequency of 8.4 GHz during a strong radio outburst of approximately 400 mJy. The data are consistent with a circular Gaussian source of 0.8 + or - 0.12 milli-arcsec (FWHM), corresponding to a linear size of 4 + or - 0.6 x 10 to the 11th cm. This is comparable to the distance between the surfaces of the two stars, or to 75 percent of the diameter of the chromospherically active K star. Extrapolation of published photometric data shows that the starspot formation of HR 1099 was facing toward the observers at the times of observations. The high equivalent brightness temperature, approximately 10 billion K, is consistent with gyrosynchrotron emission from a power-law energy distribution of electrons in a magnetic field of strength about 30 gauss.

Mutel, R. L.↗
NASA NTRS1994

Near-infrared (J, H, K) imaging of Herbig Ae/Be stars

Near-infrared (J, H, K) images were obtained for 16 Herbig Ae/Be stars. The primary goal was to determine the contributions by circumstellar nebulae and nearby sources to near-infrared photometry carried out with large beams. Quasi-simultaneous photometric results were obtained with small apertures. The emission toward five Herbig Ae/Be stars is extended, including all four Group II sources in our sample (Hillebrand et al. 1992); 13 objects have nearby sources (within 10 sec separation). However, the extended emission and nearby sources are too faint to affect previous photometry significantly. The surface brightness profiles of most of the nebulae can be explained by reflection nebulae which scatter the light from the central star/disk systems with single, isotropic scattering processes. The exception is Par 21, which may require emission from very small grains. The color-color diagram, making use of our new photometry, essentially agrees with the results of Lada & Adams (1992). The Group II objects in our sample tend to have extended emission more frequently than do Group I objects, supporting the suggestion of Hillebrand et al. that Group II sources are more affected by circumstellar envelopes. However, most of the near-infrared emission comes from the central (less than or = 6 sec) regions. This upper limit is still much larger than the expected size of accretion disks. Possible envelope effects could not be ruled out for most Herbig Ae/Be stars with unresolved emission. The images do not clearly favor very small, thermally emitting grains as the origin of the near-infrared emission. The problem still exists of how to explain the observed peaks near 3 sec in the spectral energy distributions of Herbig Ae/Be stars. The possible effects of envelopes and companions are addressed.

Li, Wenbin↗
NASA NTRS1995

Nature and location of the source of plasma sheet boundary layer ion beams

Onsager et al. (1991) have put forward a model of the formation of the plasma sheet boundary layer (PSBL) which relies on a steady source of plasma from a spatially extended plasma sheet, together with steady equatorward and earthward ExB convection of field lines due to reconnection at a downtail neutral line. This model is a synthesis of earlier proposals and it explains such features as an electron layer exterior to the ion boundary layer, ion velocity dispersion, counter streaming beams, low-speed cutoffs in the beams. It also explains the apparent evolution of the ion beams through 'kidney bean' shaped velocity-space distributions toward quasi-isotropic shells without invoking pitch angle scattering or energy diffusion. In this paper we explore two ramifications of the model. In principle we can map, as a function of time, the downtail neutral line distance and establish whether or not it is retreating during substorm recovery. We can also reconstruct the plasma distribution function near the neutral line to see if it is most consistent with mantle or plasma sheet plasma. We perform this analysis using International Sun Earth Explorer (ISEE) Fast Plasma Experiment (FPE) data for two plasma sheet recovery events, one on March 1, 1978, and the other on April 18, 1978. On March 1, 1978, we find evidence for an initial retreat from around 110 to 160 R(sub E) in the first 15 min; little further retreat occurs thereafter. On April 18, 1978, the neutral line location ranges from as little as 40 R(sub E) tailward of the satellite to as much as 200 R(sub E), but there is no evidence for a systematic retreat. The reconstructed ion distributions for these events are most consistent with a plasma sheet origin for the March 1 case and possibly plasma mantle or low-latitude boundary layer for the April 18 case.

Elphic, R. C.↗
NASA NTRS1997

Comparison Tools for Assessing the Microgravity Environment of Missions, Carriers and Conditions

The Principal Component Spectral Analysis and the Quasi-steady Three-dimensional Histogram techniques provide the means to describe the microgravity acceleration environment of an entire mission on a single plot. This allows a straight forward comparison of the microgravity environment between missions, carriers, and conditions. As shown in this report, the PCSA and QTH techniques bring both the range and median of the microgravity environment onto a single page for an entire mission or another time period or condition of interest. These single pages may then be used to compare similar analyses of other missions, time periods or conditions. The PCSA plot is based on the frequency distribution of the vibrational energy and is normally used for an acceleration data set containing frequencies above the lowest natural frequencies of the vehicle. The QTH plot is based on the direction and magnitude of the acceleration and is normally used for acceleration data sets with frequency content less than 0.1 Hz. Various operating conditions are made evident by using PCSA and QTH plots. Equipment operating either full or part time with sufficient magnitude to be considered a disturbance is very evident as well as equipment contributing to the background acceleration environment. A source's magnitude and/or frequency variability is also evident by the source's appearance on a PCSA plot. The PCSA and QTH techniques are valuable tools for extracting useful information from acceleration data taken over large spans of time. This report shows that these techniques provide a tool for comparison between different sets of microgravity acceleration data, for example different missions, different activities within a mission, and/or different attitudes within a mission. These techniques, as well as others, may be employed in order to derive useful information from acceleration data.

DeLombard, Richard↗