Search NASA⌕ Search

SEARCH · Search NASA

Results for “Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Protective effect of apigenin on radiation-induced chromosomal damage in human lymphocytes

The potential use of flavonoids as a radioprotector is of increasing interest because of their high antioxidant activity and abundance in the diet. The aim of this study is to examine genotoxic and radioprotective effects of one of the most common flavonoids, apigenin, on radiation-induced chromosome aberrations in human lymphocytes. The cytokinesis-block micronucleus (CBMN) assay was used to evaluate such effects of apigenin. Blood samples were collected from two non-smoking healthy male volunteers who had no history of previous exposure to other clastogenic agents. Isolated lymphocytes were cultured. There were two tubes per concentration for all treatments. To evaluate the genotoxicity of apigenin, cells were first treated with different concentrations of apigenin (0, 2.5, 5, 10 and 25 microg/mL) at 24 h after culture initiation, followed by cytochalasin-B (Cyt-B) treatment (3 microg/mL) and cell harvest at 44 and 72 h, respectively. Secondly, to investigate the radioprotective effect, cell cultures were exposed to different concentrations of apigenin as described above for 30 min before being irradiated to 2 Gy of 137Cs gamma rays (at a dose rate of 0.75 Gy/min). In all instances, the frequency of MN was scored in binucleated (BN) cells. The nuclear proliferation index also was calculated. We did not detect an increase in the frequency of MN in non-irradiated human lymphocyte cultures treated with 2.5, 5.0 or 10 microg/mL apigenin; although, we did observe an increase in cultures treated with 25 microg/mL apigenin (the highest concentration of apigenin used in our study). We also observed a significant increase in the frequency of MN in irradiated cells overall; however, the frequency was decreased as the concentration of apigenin increased, suggesting a radioprotective effect. These findings provide a basis for additional studies to help clarify the potential use and benefit of apigenin as a radioprotector.

NASA Discipline Radiation Health↗
DOE OSTI2020

Modulation of the Effective Metal-Support Interactions for the Selectivity of Ceria Supported Noble Metal Nanoclusters in Atmospheric CO 2 Hydrogenation

Ever-increasing attention is given to the sustainable utilization of CO 2 in the atmosphere out of environmental and economic considerations. The deep-going clarification of the effective and ineffective metal-support interactions (MSI) in the supported catalysts for the catalytic performance of CO 2 hydrogenation is particularly needed to design highly active nanocatalysts. How to tune the MSI to be effective for the selectivity of goal hydrogenation products is a significant but rather challenging subject. In this work, we demonstrate that the selectivity in CO 2 hydrogenation can be regulated from preferential CH 4 production to preferential CO production by varying the nature of the electronic MSI for ceria supported noble metal nanoclusters, and the effective MSI play a pivotal role for the catalytic systems with opposite hydrogenation selectivity. The modulation of the effective MSI for the selectivity in CO 2 hydrogenation sheds new light on the comprehensive understanding of the MSI and interfacial effects in terms of tailoring and controlling the performance of supported heterogeneous catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of radiation exposure on survival after first solid cancer diagnosis in A-bomb survivors

Comparison of the estimated effect of atomic bomb radiation exposure on solid cancer incidence and solid cancer mortality in the RERF Life Span Study (LSS) reveals a difference in the magnitude and shape of the excess relative risk dose response. A possible contributing factor to this difference is pre-diagnosis radiation effect on post-diagnosis survival. Pre-diagnosis radiation exposure theoretically could influence post-diagnosis survival by affecting the genetic makeup and possibly aggressiveness of cancer, or by compromising tolerance for aggressive treatment for cancer. We analyze the radiation effect on post-diagnosis survival in 20,463 LSS subjects diagnosed with first-primary solid cancer between 1958 and 2009 with particular attention to whether death was caused by the first-primary cancer, other cancer, or non-cancer diseases. From multivariable Cox regression analysis of cause-specific survival, the excess hazard at 1 Gy (EH 1Gy ) for death from the first primary cancer was not significantly different from zero – p = 0.23, EH 1Gy = 0.038 (95 % CI: –0.023, 0.104). Death from other cancer and death from non-cancer diseases both were significantly associated with radiation dose: other cancer EH 1Gy = 0.38 (95 % CI: 0.24, 0.53); non-cancer EH 1Gy = 0.24 (95 % CI: 0.13, 0.36), both p < 0.001. There is no detectable large effect of pre-diagnosis radiation exposure on post-diagnosis death from the first primary cancer in A-bomb survivors. A direct effect of pre-diagnosis radiation exposure on cancer prognosis is ruled out as an explanation for the difference in incidence and mortality dose response in A-bomb survivors.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Mesoscale modeling and semi-analytical approach for the microstructure-aware effective thermal conductivity of porous polygranular materials

Here we established a comprehensive modeling approach for investigating the microstructure-aware effective thermal conductivity ($κ_{eff}$) for porous microstructures containing solid particles and gaseous pores. Our approach combines the mesoscale computational modeling framework and the semi-analytical method, allowing for efficient prediction of $κ_{eff}$ for realistic porous microstructures, while considering complicated microstructural thermal conduction pathways effectively in the prediction. We used the diffuse-interface mesoscale computational model to generate extensive simulated $κ_{eff}$ data for realistic digital representations of microstructures with wide ranges of porosity ($f_p$), thermal conductivity of the gas phase ($κ_g$), and thermal conductivity of the solid phase ($κ_s$). From the simulated data, we identified two property variation regimes for $κ_{eff}$: (1) a slow $κ_{eff}$ increase for $κ_s ~ κ_g$; and (2) a faster $κ_{eff}$ increase for $κ_s \gg κ_g$. To capture the key features of the relationship between the microstructure and $κ_{eff}$, we derived a semi-analytical model by introducing structure and intensification factors. The two new factors incorporate the calibrated effective contribution of the solid volume with $κ_s$ and additional interfacial effects into the prediction of $κ_{eff}$, respectively, allowing for consideration of parallel, serial, and interfacial conduction mechanisms effectively. Using the selected simulation data, we quantified key model parameters within the semi-analytical model and verified that the parameterized model exhibits excellent agreement with simulated $κ_{eff}$ for the entire range of the parameter space.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In-situ effect in cross-ply laminates under various loading conditions analyzed with hybrid macro/micro-scale computational models

In this article, multi-scale finite element analyses based on three-dimensional (3D) hybrid macro/micro-scale computational models subjected to various loading conditions are carried out to examine the in-situ effect imposed by the neighboring plies on the failure initiation and propagation of cross-ply laminates. A detailed comparative study on crack suppression mechanisms due to the effect of embedded laminar thickness and adjacent ply orientation is presented. Furthermore, we compare the results of in-situ transverse failure strain and strength between the computational models and analytical predictions. Good agreements are generally observed, indicating the constructed computational models are highly accurate to quantify the in-situ effect. Subsequently, empirical formulas for calculating the in-situ strengths as a function of embedded ply thickness and different ply angle between embedded and adjacent plies are developed, during which several material parameters are obtained using a reverse fitting method. Finally, a new set of failure criteria for σ 22 -τ 12 , σ 22 -τ 23 , and σ 11 -τ 12 accounting for the in-situ strengths are proposed to predict laminated composites failure under multi-axial stress states. This study demonstrates an effective and efficient computational technique towards the accurate prediction of the failure behaviors and strengths of cross-ply laminates by including the in-situ effects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A universal implementation of radiative effects in neutrino event generators

Due to the similarities between electron-nucleus (eA) and neutrino-nucleus scattering (νA), eA data can contribute key information to improve cross-section modeling in eA and hence in νA event generators. However, to compare data and generated events, either the data must be radiatively corrected or radiative effects need to be included in the event generators. We implemented a universal radiative corrections program that can be used with all reaction mechanisms and any eA event generator. Our program includes real photon radiation by the incident and scattered electrons, and virtual photon exchange and photon vacuum polarization diagrams. It uses the “extended peaking” approximation for electron radiation and neglects charged hadron radiation. This method, validated with GENIE, can also be extended to simulate νA radiative effects. This work facilitates data-event-generator comparisons used to improve νA event generators for the next-generation of neutrino experiments. Program Title: emMCRadCorr CPC Library link to program files:https://doi.org/10.17632/hmsxg82vnf.1 Developer's repository link:https://github.com/e4nu/emMCRadCorr Licensing provisions: AGPLv3 Programming language:C++ Nature of problem: Radiative effects can significantly modify the event kinematics and the resulting cross-sections. Such effects must be accounted for when comparing event generators to eA data. Existing radiative correction codes are tailored to specific processes and topologies, and are limited to a restricted phase space defined by the spectrometer acceptance. Therefore, a more general approach is required to apply radiative corrections to semi-inclusive and exclusive eA measurements. Solution method: Our program incorporates real photon radiation from both the incident and scattered electrons, as well as virtual photon exchange and photon vacuum polarization effects. It employs the “extended peaking” approximation for electron radiation while neglecting contributions from charged hadron radiation. The code is fully decoupled from event generator codes and can be used for all event generators in the market.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Effective kinetics driven by dynamic concentration gradients under coupled transport and reaction

Biogeochemical reaction kinetics are generally established from batch reactors where concentrations are uniform. In natural systems, many biogeochemical processes are characterized by spatially and temporally variable concentration gradients that often occur at scales which are not resolved by field measurements or biogeochemical and reactive transport models. Yet, it is not clear how these sub-scale chemical gradients affect reaction kinetics compared to batch kinetics. Here we investigate this question by studying the paradigmatic case of localized pulses of solute reacting with a solid or a dissolved species in excess. Additionally, we consider non-linear biogeochemical reactions, representative of mineral dissolution, adsorption and redox reactions, which we quantify using simplified power-law kinetics. The combined effect of diffusion and reaction leads to effective kinetics that differ quantitatively and qualitatively from the batch kinetics. Depending on the nonlinearity (reaction order) of the local kinetics, these effects lead to either enhancement or decrease of the overall reaction rate, and result in a rich variety of reaction dynamics. We derive analytical results for the effective kinetics, which are validated by comparison to direct numerical simulations for a broad range of Damköhler numbers and reaction order. Our findings provide new insights into the interpretation of imperfectly mixed lab experiments, the effective kinetics of field systems characterized by intermittent reactant release and the integration of sub-scale concentration gradients in reactive transport models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

SWAT model application for evaluating agricultural conservation practice effectiveness in reducing phosphorous loss from the Western Lake Erie Basin

Lake Erie is threatened by eutrophication and harmful algal blooms due to excess nutrient loading from agricultural sources. Agricultural conservation practices (ACPs) have been developed and implemented to reduce nutrient losses but estimating ACP effectiveness is challenging. The Soil and Water Assessment Tool (SWAT) has been used to investigate ACP effectiveness for water quality improvement. Many SWAT applications have been developed by different investigators to evaluate ACP effectiveness for reducing nutrient, particularly phosphorus (P), loading in the agriculturally-dominated Western Lake Erie Basin (WLEB). Our objective is to establish what has been achieved by past modeling research and make suggestions for future applications and improvements. We synthesized the findings of 28 SWAT modeling studies within the WLEB. Models generally performed satisfactorily against accepted criteria for streamflow and sediment, but performance for P loads, like soluble reactive P, was mostly “unsatisfactory”. The “unsatisfactory” performance maybe due to imperfections and idealizations in model formulations and/or parameterization. Thus, simulations of P transport and transformation processes need improvement. In addition, model parameter selection is the key part of model set-up. Most SWAT modeling studies used default values during initial set-up, then performed calibration and validation. It was found that the calibrated P related parameter values varied widely across different studies, even within the same watershed with some values unrealistic for the study areas. The phenomena of different combinations of model parameters producing similar outputs indicates equifinality. Equifinality in the baseline model may impact results when ACPs are incorporated. Furthermore, the unrealistic values used in ACP assessment undermine the credibility of ACP effectiveness. Future model applications should try to re-examine the calibrated P parameters and make sure they are realistic for the study area as well as reduce equifinality by constraining the model with characterization of watershed conditions, better understanding of hydrologic processes, and parameter values based on real-world observations. As a result, future model applications should focus on improving P transport and transformation processes, using measured watershed characteristics for parameterization, and improving reflections of climate change, which could result in more accurate assessments of ACP effectiveness to meet targeted goals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Estimating diffusion coefficients of shale oil, gas, and condensate with nano-confinement effect

Molecular diffusion plays an important role in oil and gas migration in tight shale formations. However, there are insufficient reference data in the literature to specify the diffusion coefficients within porous media. This study aims at calculating diffusion coefficients of shale gas, shale condensate, and shale oil at reservoir conditions with CO 2 injection for EOR/EGR. The large nano-confinement effects including large gas-oil capillary pressure and critical property shifts could alter the phase behaviors. This paper estimates the diffusivities of shale fluids in nanometer-scale shale rock from two perspectives: 1) examining the shift of diffusivity caused by nanopore confinement effects from phase change (phase composition and fluid property) perspective, and 2) calculating the effective diffusion coefficient in porous media by incorporating rock intrinsic properties (porosity and tortuosity factor). The tortuosity is obtained by using tortuosity-porosity relations as well as the measured tortuosity of shale from 3D imaging techniques. The results indicated that nano-confinement effects could affect the diffusion coefficient through altering the phase properties, such as phase compositions and densities. Compared to bulk phase diffusivity, the effective diffusion coefficient in porous shale rock is reduced by 10 2 to 10 4 times as porosity decreases from 0.1 to 0.03.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2020

Fluid model for the piezothermal effect

When a gas in an externally imposed potential field is compressed, temperature gradients appear. This has been called the piezothermal effect. It is possible to analytically calculate the time-dependent behavior of the piezothermal effect using a linearized fluid model. Quantitative differences between the fluid-model results and previous numerical calculations can be explained by the effects of viscosity and heat conductivity. Here, the fluid model casts the piezothermal effect as a spectrum of buoyancy oscillations, which yields new physical insights into the effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Gamma, electron beam and X-ray irradiation effects on polymers in an advanced bone cement mixer device

The medical device industry has been investigating ways to increase the use of alternatives to cobalt-60 gamma radiation and ethylene-oxide gas sterilization, such as electron beam (E-beam) and X-ray radiation, due to regulatory and market pressures. One impediment to switching to E-beam or X-ray technology for sterilization is the lack of data on the effects of these radiation sources on medical device polymers. To provide such data this work considers irradiation and testing of a common single-use medical bone cement mixing system, the Stryker Advanced Cement Mixer (ACM®), that is composed of seven polymer materials. The ACM® devices considered here were processed to sterilization-relevant doses (15, 25, 50, and 70 kGy) using three radiation technologies: gamma, E-beam, and X-ray. The system and its polymer components were tested for product functionality, as well as mechanical and visual properties to determine how exposure effects may be influenced by radiation technology and dose level. We found that although there were instances of statistically significant differences in effects between the gamma-irradiated products and those irradiated with E-beam and X-ray, those effects were negligible in terms of retained functionality of the product and retained mechanical properties of the polymer components. Overall, results of this study demonstrate that, for of the effects studied, E-beam and X-ray are viable alternatives to cobalt-60 gamma radiation for sterilization of the polymer-based device investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Evidence for the 3D Radiative Effects of Boundary-Layer Clouds From Observations of Direct and Diffuse Surface Solar Fluxes

Numerical experiments have revealed the importance of horizontal transport of light in the presence of clouds (“3D effects”), with consequences for climate, weather, and solar resource availability predictions. Yet, analysis of 3D effects from observations remain sparse because of the difficulty to isolate the effect of horizontal transport in radiation measurements. In this study, we provide observational evidence for 3D effects based on the direct-diffuse partition of surface solar fluxes. It is compared to outputs from the ecRad radiative transfer scheme run on retrieved cloud profiles. Furthermore, the direct-beam calculation takes careful account of the field-of-view of the pyrheliometer to ensure consistency between observed and modeled direct fluxes. Only the solver that accounts for 3D effects is able to reproduce the observed mean direct-diffuse partition as a function of solar zenith angle and cloud cover, in particular at large solar zenith angles where cloud sides intercept most of the direct beam.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Impacts of Suppressing Excessive Light Rain on Aerosol Radiative Effects and Health Risks

Global climate models (GCMs) have been used widely to study radiative forcing and health risks of aerosols. A recent study using two GCMs found that light rain plays a dominant role in controlling aerosol loading. However, “too much light rain and too little heavy rain” is a longstanding bias in GCMs. It is unclear how much light rain affects aerosol-cloud-radiation interactions and health risks from air pollution. Here, in this work, we show that, with the correction of the rainfall intensity spectrum in the National Center for Atmospheric Research Community Atmosphere Model version 5.3 by introducing a stochastic deep convection scheme, the reduced frequency of light rain (1–20 mm d -1 ) results in changes of aerosol direct radiative effects (DRE) of up to -0.5 ± 0.03 W/m 2 and aerosol cloud radiative effects (CRE) of up to -0.9 ± 0.03 W/m 2 . The total (CRE + DRE) radiative effects of light rain-mediated aerosol changes exceed the present-day anthropogenic forcing of aerosols relative to preindustrial levels from the Coupled Model Intercomparison Project (CMIP5&6) models. However, the correction of the rainfall intensity spectrum has little effect on anthropogenic aerosol forcing (defined as the radiative perturbation due to changes in aerosol concentrations between the industrial era and preindustrial levels). Due to increased exposure to fine particulates (PM 2.5 ), the estimated global total premature mortality is much higher than previously estimated, by 300,000 ± 60,000 deaths per year, and is more severe in populous regions such as India and China. The findings in this study highlight the need to understand uncertainties in radiative effects and health risks of aerosols due to simulation biases of precipitation in GCMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Near‐Cloud Aerosol Retrieval Using Machine Learning Techniques, and Implied Direct Radiative Effects

Abstract There is a lack of satellite‐based aerosol retrievals in the vicinity of low‐topped clouds, mainly because reflectance from aerosols is overwhelmed by three‐dimensional cloud radiative effects. To account for cloud radiative effects on reflectance observations, we develop a Convolutional Neural Network and retrieve aerosol optical depth (AOD) with 100–500 m horizontal resolution for all cloud‐free regions regardless of their distances to clouds. The retrieval uncertainty is 0.01 + 5%AOD, and the mean bias is approximately −2%. In an application to satellite observations, aerosol hygroscopic growth due to humidification near clouds enhances AOD by 100% in regions within 1 km of cloud edges. The humidification effect leads to an overall 55% increase in the clear‐sky aerosol direct radiative effect. Although this increase is based on a case study, it highlights the importance of aerosol retrievals in near‐cloud regions, and the need to incorporate the humidification effect in radiative forcing estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Polarization-dependent electrocaloric and pyroelectric effects in ferroelectric BaTiO 3 thin films

In this paper we examine the influence of controllable polarization reversal and built-in electric fields on pyroelectric and electrocaloric effects in a BaTiO 3 thin film using a modified indirect method. We find that the magnitude of the sample's change in polarization with temperature is sensitive to the degree of polarization reversal. The pyroelectric response is small at low fractions of switched polarization and grows larger by several factors as larger fractions of polarization are reversed. This polarization reversal-sensitive pyroelectric behavior is the result of an internal built-in field, which has the effect of destabilizing low fractions of switched polarization and producing diminished pyroelectric effect. Greater fractions of switched polarization are more stable against backswitching and permit a larger pyroelectric response. Our findings highlight a characterization method for polarization-dependent pyroelectric effects in ferroelectric thin films, where built-in field effects are also present.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stabilizing effect of enhanced resistivity on peeling-ballooning instabilities on EAST

Previous stability analysis of NSTX equilibrium with lithium-conditioning demonstrates that enhanced resistivity due to the increased effective charge number Z eff (i.e. increased impurity level) can provide a stabilizing effect on low-n edge localized modes. This paper extends the resistivity stabilizing effect to the intermediate-n peeling-ballooning (PB) instabilities with the linear stability analysis of EAST high-confinement mode equilibria in NIMROD two-fluid calculations. However, in this work, the resistivity stabilizing effect on PB instabilities in the EAST tokamak appears weaker than that found in NSTX. This work may provide better insight into the physical mechanism behind the beneficial effects of impurities on pedestal stability.

EAST tokamak↗
DOE OSTI2026

Indirect tunneling enabled spontaneous time-reversal symmetry breaking and Josephson diode effect in TiN/Al 2 ⁢O 3 /Hf 0.8 ⁢Zr 0.2 ⁢O 2 /Nb tunnel junctions

Josephson diode (JD) effect in Josephson tunnel junctions (JTJs) has attracted a great deal of attention due to its importance for developing superconducting-circuitry-based quantum technologies. Even though the preparation of high-quality JTJs by techniques employed in the semiconductor industry has been demonstrated, which was an important milestone because JTJs are the building blocks of superconducting electronics even before the quantum era, the JD effect has not been accomplished in them, nor has the highly desirable electrical control of the effect. We report here the fabrication of JTJs featuring a composite tunnel barrier of Al 2 ⁢O 3 and Hf 0.8 ⁢Zr 0.2 ⁢O 2 using complementary-metal-oxide-semiconductor compatible atomic layer deposition. These JTJs were found to show the JD effect in nominally zero magnetic fields with nonreciprocity controllable via an electric training current, yielding a surprisingly large diode efficiency. The quasiparticle tunneling, through which the Josephson coupling in a JTJ is established, was found to show theoretically expected gap features but no nonreciprocity. We attribute these observations to the simultaneous presence of positive and negative local Josephson couplings in the JTJs, with the negative Josephson coupling originating from indirect tunneling, which results in spontaneous time-reversal symmetry breaking. Finally, the double-minima washboard potential for the ensemble-averaged phase difference in the resistively and capacitively shunted junction model is shown to fully account for the experimentally observed JD effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Intrinsic orbital and spin Hall effects in monolayer transition metal dichalcogenides

The orbital Hall effect (OHE) is the phenomenon of transverse flow of orbital moment in the presence of an applied electric field. Solids with broken inversion symmetry are expected to exhibit a strong OHE due to the presence of an intrinsic orbital moment at individual momentum points in the Brillouin zone, which in the presence of an applied electric field flows in different directions causing a net orbital Hall current. Here we provide a comprehensive understanding of the effect and its tunability in the monolayer two-dimensional (2D) transition metal dichalcogenides (TMDCs). Both metallic and insulating TMDCs are investigated from full density-functional calculations and effective d-band tight-binding models, as well as a minimal four-band model for the valley points that captures the key physics of the system. For the tuning of the OHE, we examine the role of hole doping as well as the change in the band parameters, which, e.g., can be controlled by strain.We demonstrate that the OHE is a more fundamental effect than the spin Hall effect (SHE), with the momentum-space orbital moments inducing a spin moment in the presence of the spin-orbit coupling, leading to the SHE. The physics of the OHE, described here, is relevant for 2D materials with broken inversion symmetry in general, even beyond the TMDCs, providing a broad platform for future research.

2D materials↗