Search NASA⌕ Search

SEARCH · Search NASA

Results for “Extensibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Comparison of Extensive Thermal Cycling Effects on Microstructure Development in Micro-alloyed Sn-Ag-Cu Solder Joints

Pb-free solder alloys based on the Sn-Ag-Cu (SAC) ternary eutectic have promise for widespread adoption across assembly conditions and operating environments, but enhanced microstructural control is needed. Micro-alloying with elements such as Zn was demonstrated for promoting a preferred solidification path and joint microstructure earlier in simple (Cu/Cu) solder joints studies for different cooling rates. This beneficial behavior now has been verified in reworked ball grid array (BGA) joints, using dissimilar SAC305 (Sn-3.0Ag-0.5Cu, wt.%) solder paste. After industrial assembly, BGA components joined with Sn-3.5Ag-0.74Cu-0.21Zn solder were tested in thermal cycling (-55 C/+125 C) along with baseline SAC305 BGA joints beyond 3000 cycles with continuous failure monitoring. Weibull analysis of the results demonstrated that BGA components joined with SAC + Zn/SAC305 have less joint integrity than SAC305 joints, but their lifetime is sufficient for severe applications in consumer, defense, and avionics electronic product field environments. Failure analysis of the BGA joints revealed that cracking did not deviate from the typical top area (BGA component side) of each joint, in spite of different Ag3Sn blade content. Thus, SAC + Zn solder has not shown any advantage over SAC305 solder in these thermal cycling trials, but other characteristics of SAC + Zn solder may make it more attractive for use across the full range of harsh conditions of avionics or defense applications.

36 MATERIALS SCIENCE↗

SCIP-Jack—a solver for STP and variants with parallelization extensions

The Steiner tree problem in graphs is a classical problem that commonly arises in practical applications as one of many variants. While often a strong relationship between different Steiner tree problem variants can be observed, solution approaches employed so far have been prevalently problem-specific. In contrast, this paper introduces a general-purpose solver that can be used to solve both the classical Steiner tree problem and many of its variants without modification. This versatility is achieved by transforming various problem variants into a general form and solving them by using a state-of-the-art MIP-framework. The result is a high-performance solver that can be employed in massively parallel environments and is capable of solving previously unsolved instances.

90C10↗

Quantum Chemical Mass Spectrometry: Verification and Extension of the Mobile Proton Model for Histidine

The quantum chemical mass spectrometry for materials science (QCMS{sup 2}) method is used to verify the proposed mechanism for proton transfer – the Mobile Proton Model (MPM) – by histidine for ten XHS tripeptides, based on quantum chemical calculations at the DFT/B3LYP/6-311+G* level of theory. The fragmentations of the different intermediate structures in the MPM mechanism are studied within the QCMS{sup 2} framework, and the energetics of the proposed mechanism itself and those of the fragmentations of the intermediate structures are compared, leading to the computational confirmation of the MPM. In addition, the calculations suggest that the mechanism should be extended from considering only the formation of five-membered ring intermediates to include larger-ring intermediates. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Unconventional lignin monomers—Extension of the lignin paradigm

Lignin is largely produced by the oxidative radical coupling of the three monolignols, pcoumaryl, coniferyl, and sinapyl alcohols, which form the p-hydroxyphenyl, guaiacyl, and syringyl lignin units in the lignin polymer. However, it is increasingly appreciated that other “unconventional” phenolic compounds can also behave as lignin monomers participating in oxidative radical reactions during the lignification process and being also integrated into the lignin polymer in some plants. Various phenolic compounds have been found incorporated into the lignin, including phenolic compounds derived from the monolignol biosynthetic pathway (e.g., monolignol ester conjugates, caffeyl and 5-hydroxyconiferyl alcohols, hydroxycinnamaldehydes, among others). More fascinating still was the discovery in some plants of a series of phenolic compounds arising from other polyphenolic biosynthetic pathways, including flavonoids (tricin, dihydrotricin, naringenin, naringenin chalcone), hydroxystilbenes (resveratrol, piceatannol, and isorhapontigenin, and their O-glucosylated counterparts piceid, astringin, and isorhapontin), and ferulic acid amides (feruloyltyramine, and diferuloylputrescine), that are integrated into the lignin polymer. All of these discoveries indicate that the lignin structure is far more complex than previously thought, that the definition of lignin should not be restricted to a polymer derived solely from the three traditional monolignols, and that other unconventional lignin monomers must be considered, thus expanding the established definition of lignin. Here, the overriding factor remains, however, that lignification, the process of polymerization to the lignin polymer, allows this compositional flexibility because it is a simple chemical process.

59 BASIC BIOLOGICAL SCIENCES↗

Extensive nanoprecipitate morphology transformation in a nanostructured ferritic alloy due to extreme thermomechanical processing

Nano-oxide precipitates in a modern nanostructured ferritic alloy were investigated after extreme thermomechanical processing into a thin-walled tube geometry. It was found that the morphology of the precipitates changed from spherical to rod-shaped, with some increasing to aspect ratios of up to 9, despite the precipitate volume fraction (0.3%) and number density (> 10 23 m -3 ) of precipitates remaining unchanged. High-resolution electron microscopy showed that the precipitates likely remained coherent with the Fe-matrix, while atom probe tomography confirmed that the precipitate compositions remained unaffected by the transformation. The morphological change was attributed to the shearable nature of the (Y,Ti,O)-rich precipitates, indicating they should be considered as “soft” obstacles to dislocation motion. The elongation was most pronounced in larger (>5 nm) precipitates, which may be caused by preferential dissolution of the smallest (1–3 nm) precipitates followed by the competition between re-precipitation and solute diffusion to larger precipitates during recovery heat treatments.

36 MATERIALS SCIENCE↗

A Geometric Volume of Fluid-Based Multiphase Flow Solver Extension to the Reacting Flow Solver, PeleLM

A new algorithm is presented to simulate multiphase flows with surface tension in a pathway for spray combustion simulation. The algorithm combines capabilities from two open-source packages, including the interface reconstruction library (IRL), a library of computational geometry routines to enable the volume of fluid (VOF) method, and PeleLM, a solver for the reacting Navier-Stokes equations. Additionally, surface tension is implemented using the continuum surface force (CSF) model with an improved height function technique in the volume fraction field. Spurious errors in volume fraction arising from our combined strategy are corrected through a topology-based method that improves both numerical stability and accuracy. Multiple validation simulations are conducted, including (i) translations and rotations of Zalesak's disk, (ii) a stationary circular droplet with surface tension, (iii) an oscillating elliptical droplet, and (iv) three-dimensional deformation of a spherical droplet. Results indicate that the combined scheme retains the favorable properties of each of the component algorithms.

42 ENGINEERING↗

An extension of Darcy’s law incorporating dynamic length scales

We propose a physics-based, macroscale formulation of multiphase porous-media flows that both honors the validity of Darcy’s law in steady or near-steady flows and accommodates the effects of heterogeneities and nonlinearities in unsteady flows. The new formulation recognizes that parameters characterizing the system operate at different length-scales. In particular, the use of Darcy’s law, predicated on the assumption of near-steady flows, requires dynamic length scales, owing to the possibility of rapid fluctuations in rock properties and fluid saturations attributable to heterogeneity and nonlinearity. We accommodate these dynamic length-scales through dynamic spatial averaging. The length and position of the averaging window are characterized by the length of the mixing zone and the direction of propagation of information in the transport process. Here, we validate the proposed formulation by comparing highly accurate,two dimensional numerical solutions against core-scale displacement experiments. The proposed paradigm is consistent with the classical multiphase Darcy formulation, in the sense that the latter also represents the results of an averaging approach.

42 ENGINEERING↗

Extension of SCALE/Sampler’s sensitivity analysis

Nuclear data are a major source of uncertainties in reactor physics calculations. The propagation of nuclear data uncertainties to important system responses is instrumental when determining appropriate safety margins in reactor safety analyses. It is also important to understand the major contributors to the observed uncertainties to make recommendations for further measurements and evaluations and aid in the understanding of the studied system. The SCALE code system allows for nuclear data uncertainty analysis based on the random sampling approach as implemented in SCALE’s Sampler sequence. Sampler was recently extended by a sensitivity analysis in terms of the calculation of two correlation-based sensitivity indices. This analysis allows for the identification of the top contributing nuclear reactions to any analyzed output uncertainty. This paper presents the sensitivity indices, along with their interpretation and limitations. It demonstrates the application in an eigenvalue and decay heat analysis for a boiling water reactor fuel assembly.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Extension of the discrete generalized multigroup method using SPH factors

The discrete generalized multigroup (DGM) method provides a way to treat the energy dependence of neutron transport similarly to the standard multigroup approximation. However, DGM uses an orthogonal basis to retain the energy dependence in higher-order terms. Using correction factors similar to traditional Superhomogénéisation (SPH) factors, the DGM method may be extended to produce cross sections that are homogenized over both space and energy. Additionally, since some fine-group energy dependence is retained, the resulting homogenized cross sections are more problem-independent than cross sections homogenized by SPH factors alone. In particular, a 44-group set of cross sections is collapsed to approximately a 1% error in the pincell fission densities for a test problem using three DOF per coarse energy group.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Scattering amplitudes for multi-indexed extensions of solvable potentials

New solvable one-dimensional quantum mechanical scattering problems are presented. They are obtained from known solvable potentials by multiple Darboux transformations in terms of virtual and pseudo virtual wavefunctions. The same method applied to confining potentials, e.g. Pöschl–Teller and the radial oscillator potentials, has generated the multi-indexed Jacobi and Laguerre polynomials. Simple multi-indexed formulas are derived for the transmission and reflection amplitudes of several solvable potentials. -- Highlights: •Scattering amplitudes calculated for infinitely many new solvable potentials. •New scattering potentials obtained by deforming six known solvable potentials. •Multiple Darboux transformations in terms of (pseudo) virtual states employed. •Scattering amplitudes checked to obey the shape invariance relation. •Errors in scattering amplitudes of some undeformed potentials in the literature corrected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phenomenology of SUGRA extensions of the Starobinsky model

We analyze BI-extended model in a complete form and compare the predictions with that of Starobinsky model. Under the parameter constraints in Planck 2018, we find that the dynamics of the whole inflation process described by BI-extended and Starobinsky models are nearly the same, even though there are some differences in the regions out of inflation. We also find the scales of parameters in BI-extended model and inflaton values at the first horizon crossing required to implement inflation. The changes of (n{sub s},r) fingerprints of BI-extended model and that of evolutions of inflaton field due to the variations of relevant parameters are also investigated.

79 ASTRONOMY AND ASTROPHYSICS↗

Muscle spindles exhibit core lesions and extensive degeneration of intrafusal fibers in the Ryr1{sup I4895T/wt} mouse model of core myopathy

Muscle spindles from the hind limb muscles of adult Ryr1{sup I4895T/wt} (IT/+) mice exhibit severe structural abnormalities. Up to 85% of the spindles are separated from skeletal muscle fascicles by a thick layer of connective tissue. Many intrafusal fibers exhibit degeneration, with Z-line streaming, compaction and collapse of myofibrillar bundles, mitochondrial clumping, nuclear shrinkage and pyknosis. The lesions resemble cores observed in the extrafusal myofibers of this animal model and of core myopathy patients. Spindle abnormalities precede those in extrafusal fibers, indicating that they are a primary pathological feature in this murine Ryr1-related core myopathy. Muscle spindle involvement, if confirmed for human core myopathy patients, would provide an explanation for an array of devastating clinical features characteristic of these diseases and provide novel insights into the pathology of RYR1-related myopathies. - Highlights: • Muscle spindles exhibit structural abnormalities in a mouse model of core myopathy. • Myofibrillar collapse and mitochondrial clumping is observed in intrafusal fibers. • Myofibrillar degeneration follows a pattern similar to core formation in extrafusal myofibers. • Muscle spindle abnormalities are a part of the pathological phenotype in the mouse model of core myopathy. • Direct involvement of muscle spindles in the pathology of human RYR1-related myopathies is proposed.

60 APPLIED LIFE SCIENCES↗