Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Thermal Systems Modeling of Chemical Integrated Power Source (CHIPS) to Survive Lunar Night Environments

This paper presents the results of the systems level thermal modeling for a conceptual Chemical Heat Integrated Power Source (CHIPS). This proposed system offers a combined thermal and electrical power source to support survival of spacecraft operating in extreme low temperature lunar environments, without the use of radioisotope-based sources. A conceptual design study has been completed for this system, that uses heat generated by an exothermic chemical reaction in place of radioisotope or electrical heat sources. The goal of the study was to evaluate the feasibility of such as system through thermodynamic and chemical analysis and thermal modeling, and to identify technology gaps to inform a technology development and maturation plan. The specific technical objectives focused on delivery of 90-100 Wth thermal power and 30-40 We electrical power for 336 hours to a representative Commercial Lunar Payload Services (CLPS) lander, to support lunar surface survival and limited operations through a lunar night. The total system mass was targeted at ≤50 kg. A highly exothermic chemical reaction system is used to generate on-board electrical power for spacecraft systems, and thermal power to maintain critical spacecraft/lander systems within their allowable flight temperature (AFTs). Based on the very high energy content of the chemical reaction system, a much higher amount of heat per unit mass can be delivered to the spacecraft, relative to a rechargeable lithium-ion battery and electrical heater(s). Since radioisotope heaters or generators are not used, the system will be orders of magnitude lower in cost than a radioisotope heating/power unit, without the attendant regulatory complexities. As part of the CHIPS concept, a fraction of the thermal power generated is converted to electrical power via an appropriate thermal-to-electric converter technology (such as a free piston Stirling converter or a thermoelectric generator module), to provide power to critical loads. This approach is ideally suited to support operation of commercial landers (e.g., via the CLPS program). In most cases, these landers are only designed to operate during a portion of the lunar day, with no provision for survival through the lunar night. By supporting lunar night survival, a mission can be extended through the lunar night and at least into another lunar day, thus turning a nominal eight-day mission into a 36-day mission. Therefore, the current system demonstration will focus on scalability to support at least 336 hours (one lunar night) of continuous thermal and electrical power generation. Although initially targeted to support lunar equatorial landings, the technology is extensible to missions at the lunar poles, other extreme environments in the Solar System or even air-independent applications on Earth (e.g., ocean exploration).

West, William↗

Thermal Systems Modeling of Chemical Heat Integrated Power Source (CHIPS) to Survive Lunar Night Environments

This paper presents the results of the systems level thermal modeling for a conceptual Chemical Heat Integrated Power Source (CHIPS). This proposed system offers a combined thermal and electrical power source to support survival of spacecraft operating in extreme low temperature lunar environments, without the use of radioisotope-based sources. A conceptual design study has been completed for this system, that uses heat generated by an exothermic chemical reaction in place of radioisotope or electrical heat sources. The goal of the study was to evaluate the feasibility of such a system through thermodynamic and chemical analysis and thermal modeling, and to identify technology gaps to inform a technology development and maturation plan. The specific technical objectives focused on delivery of 90 to 100 Wth thermal power and 30 to 40 We electrical power for 336 hours to a representative Commercial Lunar Payload Services (CLPS) lander, to support lunar surface survival and limited operations through a lunar night. The total system mass was targeted at ≤50 kg. A highly exothermic chemical reaction system is used to generate on-board electrical power for spacecraft systems, and thermal power to maintain critical spacecraft/lander systems within their allowable flight temperature (AFTs). Based on the very high energy content of the chemical reaction system, a much higher amount of heat per unit mass can be delivered to the spacecraft, relative to a rechargeable lithium-ion battery and electrical heater(s). Since radioisotope heaters or generators are not used, the system will be orders of magnitude lower in cost than a radioisotope heating/power unit, without the attendant regulatory complexities. As part of the CHIPS concept, a fraction of the thermal power generated is converted to electrical power via an appropriate thermal-to-electric converter technology (such as a free piston Stirling converter or a thermoelectric generator module), to provide power to critical loads. This approach is ideally suited to support operation of commercial landers (e.g., via the CLPS program). In most cases, these landers are only designed to operate during a portion of the lunar day, with no provision for survival through the lunar night. By supporting lunar night survival, a mission can be extended through the lunar night and at least into another lunar day, thus turning a nominal eight-day mission into a 36-day mission. Therefore, the current system demonstration will focus on scalability to support at least 336 hours (one lunar night) of continuous thermal and electrical power generation. Although initially targeted to support lunar equatorial landings, the technology is extensible to missions at the lunar poles, other extreme environments in the Solar System or even air-independent applications on Earth (e.g., ocean exploration).

West, William↗

Pterodactyl: 6-DOF Integration of Guidance and Control Algorithms in Genesis

The NASA-funded Pterodactyl project seeks to advance the current state-of-the-art for entry vehicles by developing novel guidance and control technologies for Deployable Entry Vehicles. This paper builds upon the Pterodactyl architecture that employed eight individually articulating flaps with two options for guidance, bank angle modulation with the Fully Numerical Predictor Corrector Entry Guidance (FNPEG) technique and angle of attack and sideslip modulation with FNPEG uncoupled range control. These, with a linear quadratic regulator controller, have previously been presented in separate 3-DOF trajectory simulations, one for translational motion and another for rotational dynamics. This work will show results for integrated 6-DOF simulations, leveraging recent advancements in trajectory simulation tools, namely the Julia-based Genesis package. Results show similar performance for both schemes when compared to the previously presented 3-DOF results once the controllers were adequately tuned. Angle of attack and sideslip modulation necessitated a controller designed at high dynamic pressure conditions, and bank angle modulation necessitated a controller designed at lower dynamic pressure conditions. Notably, angle of attack and sideslip modulation could not achieve the parachute deploy point target Mach number of 2, when only tuning the controller gains, thus future work will be needed to tune guidance specific parameters to achieve acceptable range targeting and guidance command tracking.

DEV↗

Improving thermodynamic nudging in the E3SM Atmosphere Model version 2 (EAMv2): strategy and hindcast skills on weather systems

Nudging techniques are commonly employed to constrain atmospheric simulations toward observed states, facilitating model evaluation and sensitivity studies. However, if applied improperly – particularly to thermodynamic variables such as temperature and humidity – nudging can distort physical processes and introduce spurious biases, undermining the credibility of the simulations. This study presents an improved nudging implementation that applies vertically modulated tendencies to reduce adverse impacts on model physics. The framework is tested in version 2 of the Energy Exascale Earth System Model (EAMv2) using a suite of hindcast simulations nudged toward ERA5 reanalysis. We systematically evaluate the individual and combined effects of nudging wind, temperature, and humidity fields on the model's ability to represent large-scale atmospheric states and high-impact weather systems. Results show that the revised strategy – particularly when nudging temperature and humidity at selected levels – enhances hindcast skill by improving agreement with ERA5 without degrading the hydrological cycle or precipitation processes. Additional improvements in surface temperature, outgoing longwave radiation, and precipitation biases are achieved through targeted nudging of land-surface variables. The proposed approach strengthens the representation of large-scale conditions relevant to tropical cyclones, atmospheric rivers, and extratropical cyclones in the low-resolution EAMv2. These findings demonstrate that carefully designed thermodynamic nudging, especially of temperature and humidity, improves the realism of constrained simulations and broadens the utility of nudged EAMv2 for atmospheric modeling, machine learning, and high-impact weather research.

Atmospheric river↗

An Investigation of Nonlinear Controller for Propulsion Controlled Aircraft

Aircraft control systems are usually very reliable because of redundancy and multiple control surfaces. However, there are rare occasions when potentially disastrous flight control system failures do occur. At such times, the use of appropriate modulation of engine thrust to stabilize the aircraft may be the only chance of survival for the people aboard. In several cases where complete loss of control systems has occurred in multi-engine aircraft, pilots used the propulsion system to regain limited control of the aircraft with various degrees of success. In order to evaluate the feasibility of using only engine thrust modulation for emergency backup flight control, the NASA Dryden Flight Research Center has been conducting a series of analytical studies and flight tests on several different types of aircraft in a propulsion controlled aircraft (PCA) program. Simulation studies have included B-720, B-727, MD-11, C-402, C-17, F-18, and F-15, and flight tests have included B-747, B-777, MD-11, T-39, Lear 24, F-18, F-15, T-38, and PA-30. One objective was to determine the degree of control available with manual manipulation (open-loop) of the engine throttles. Flight tests and simulations soon showed that a closed loop controller could improve the chances of making a safe runway landing. The major work to date has concentrated on three aircraft (F-15, F-18, and the MD-11). Successful landings using PCA controllers were performed on the F-15 and MD-11 without the use of control surfaces. During the course of the research, some unique challenges have been identified. Compared to the conventional flight control surfaces, the engines are slow and have limited control effectiveness. Hence the ability of the system to promptly respond to aerodynamic changes is limited. Consequently, many nonlinear effects, which are easily accommodated by a conventional flight control system, become significant issues in the design of an effective controller when the engines are used as the only control effectors. A number of nonlinear behaviors observed during PCA flight tests, which are not meant to be exhaustive, are reviewed in the next section.

Lu, Ping↗

Design and Testing of the X-38 Spacecraft Primary Parafoil

In August of 1995 the NASA began testing large ram-air parafoils for potential use in the landing phase of spacecraft recovery. This effort eventually became a part of the X-38 project, a technology demonstrator for the International Space Station Emergency Crew Return Vehicle. This paper traces how the original parafoil, used in the U.S. Army Graded Precision Air Delivery System (GPADS), was modified to improve the initial deployment dynamics. A discussion of how test experience with 750 sq ft parafoils has been used to scale up to the full-scale 5500 sq ft and 7500 sq ft parafoils is presented. In particular, the development of two techniques that have greatly improved the repeatability of the parafoil initial deployment and decreased the first stage deployment dynamics are discussed: a first stage upper surface energy modulator and floor vents. Comparisons of trends and results from the various scale parachutes are presented as well as constraints that at times have driven the direction that the design has taken.

DESIGN OPTIMIZATION↗

ISRU-Based Robotic Construction Technologies For Lunar And Martian Infrastructures

Economically viable and reliable building systems and tool sets are being sought, examined and tested for extraterrestrial infrastructure buildup. This project utilizes a unique architecture weaving the robotic building construction technology with designs for assisting rapid buildup of initial operational capability Lunar and Martian bases. The project intends to develop and test methodologies to construct certain crucial infrastructure elements in order to evaluate the merits, limitations and feasibility of adapting and using such technologies for extraterrestrial application. High priority infrastructure elements suggested by our NASA advisors to be considered include landing pads and aprons, roads, blast walls and shade walls, thermal and micrometeorite protection shields and dust-free platforms utilizing the well-known insitu resource utilization (ISRU) strategy. Current extraterrestrial settlement buildup philosophy holds that in order to minimize the materials needed to be flown in, at great transportation costs, strategies that maximize the use of locally available resources must be adopted. Tools and heavy equipment flown as cargo from Earth are proposed to build required infrastructure to support future missions and settlements on the Moon and Mars. Several unique systems including the Lunar Electric Rover, the unpressurized Chariot rover, the versatile light-weight crane and Tri-Athlete cargo transporter as well as the habitat module mockups and a new generation of spacesuits are undergoing coordinated tests at NASAs D-RATS. This project intends to draw up a detailed synergetic plan to utilize these maturing systems coupled with modern robotic fabrication technologies based primarily on 3D Printing, tailored for swift and reliable Lunar and Martian infrastructure development. This project also intends to increase astronaut safety, improve buildup performance, ameliorate dust interference and concerns, and reduce time-to-commission, all in an economic manner. The goal stated in our Phase I proposal was a high fidelity demonstration at D-RATS to be conducted at the conclusion of the Phase II study. In the course of the Phase I study, however, it became clear that such demonstration was neither possible (due to the maximum Phase II budget limitation and the cost of NASA assets and related overhead expenses to support such demonstrations), nor necessary (due to NASA's low TRL expectation of Phase II results). These important facts were revealed to us only after interacting with the NIAC administrators and meetings with potential future partners at JPL and KSC. Accordingly, it was decided by the team that in order to make best use of resources we should investigate novel directions in the adaptation of our fabrication technologies by using in-house laboratories and to produce truly useful technologies and data, and then proceed with high fidelity demonstration at a later opportunity when sufficient resources become available. Furthermore, we have recognized that in addition to our building scale 3D printing technology called Contour Crafting, variations of some of our other fabrication technologies under development are suitable for construction of infrastructure elements such as regolith based ceramic tiles and hence we have decided to include some related preliminary research in this Phase II proposal.

Extraterrestrial↗

Recent Rainfall Decline in West Africa Due to Enhanced Biomass Burning and Dust Emission

Rainfall in West Africa during boreal summer is primarily controlled by the low-level southerly monsoon flow that transports moisture from the Gulf of Guinea to the region and the African Easterly Jet that modulates the convective systems. However, the role of aerosols in rainfall variability of this region, despite the large emissions of dust and black carbon in Africa, is not well-understood. Our study reveals a decline in precipitation over Southern West Africa (SWA) in the past two decades that its trend and interannual variability present an indirect relationship with the aerosols loadings. Examining the local and remote sources of aerosols, we found that the latter have a larger contribution. We have used MERRA-2 large scale atmospheric dynamics and physics data to determine the mechanisms responsible for aerosol-rainfall interactions in the region. Our results have important implications for the people and ecosystem as the increasing rates of land use change, deforestation and urbanization in the continent are expected to enhance the aerosols. This will result in an increase in the frequency and intensity of the extreme events including droughts.

Dezfuli, Amin↗

Control Algorithms for Flap-Based Mars Entry Systems

All guided entries of blunt-body entry vehicles have utilized bank-angle steering for hypersonic trajectory control. While bank-angle steering has been suc- cessful on Mars entry missions thus far, such as the Mars Science Laboratory and Mars 2020 missions, this control scheme involves a high degree of coupling over the longitudinal and lateral motion. To simultaneously control these two directions of flight, bank-angle steering vehicles typically select the bank angle magnitude to control the longitudinal motion and perform periodic bank reversals to limit the error in the lateral direction. These bank reversals are undesirable as they are performed open loop and can inject error into the trajectory. An alternative hypersonic control scheme modules the vehicle’s angle of attack (α) and sideslip angle (β) to steer the vehicle, i.e. α − β steering. Also called direct force control (DFC), α − β steering has been recently studied in the literature for both entry and aerocapture missions at several planetary bodies including Mars, Venus, Titan, and the ice giants. α − β steering provides more decoupled control over the trajectory than bank-angle steering by mostly using α to control the longitudinal motion and mostly using β to control the lateral motion. Using α − β steering avoids the bank reversals associated with bank-angle steering, and studies have shown that α − β steering may provide increased robustness to atmospheric dispersions, higher precision in landing accuracy, a lower propellant usage for powered descent, and a larger payload mass, relative to bank-angle steering. Several different actuation concepts have been studied for α − β steering, including moving mass systems, a morphing vehicle structure, and aerodynamic flaps.

Daniel L Engel↗

Roles of External Forcing and Internal Variability in Precipitation Changes of a Sub-Region of the U.S. Mid-Atlantic During 1979–2019

Observations of the seasonal mean precipitation averaged over a sub-region of the U.S. mid-Atlantic show significant increases in summer but no changes in winter during 1979–2019. Clarifying the drivers of these observed changes is important for understanding and interpreting future projections of regional precipitation by climate models. Herein, this study examines the relative effects of external forcing and internal variability in the observed multi-decadal changes using the historical and RCP8.5/SSP585 simulations from 37 models in the Coupled Model Intercomparison Project phase 5 (CMIP5), 35 models in CMIP6, as well as large ensemble simulations from 6 models, each including more than 20 members. During 1979–2019, enhanced warming over land relative to ocean due to external forcing induces low pressure anomalies over land that contribute to the wetting summer. While similar wetting also occurs during winter, such effect is offset by the drying associated with the positive phase of the North Atlantic Oscillation (NAO) in recent decades. Internal variability produces large uncertainty in the multi-decadal precipitation changes simulated by climate models through changes in large-scale circulation associated with the NAO in winter and the North Atlantic Subtropical High in summer. These multi-decadal relationships between precipitation and large-scale circulation under internal variability also manifest on inter-annual timescale. These relationships highlight enhanced moisture transport from the Gulf of Mexico and North Atlantic in winter and near the mid-Atlantic coast in summer that modulates precipitation change in the study region.

54 ENVIRONMENTAL SCIENCES↗

STS-108 Post Flight Presentation

The crewmembers of STS-108, Commander Dominic Gorie, Pilot Mark Kelly, and Mission Specialists Linda Godwin and Daniel Tani, narrate this video as footage from the mission is shown. The crew is seen flying into Kennedy Space Center, suiting up, boarding the Endeavour Orbiter, and during launch. Various mission highlights are seen, including the rendezvous with the International Space Station (ISS) and docking of Endeavour, the unloading of the Multipurpose Logistics Module (MPLM), and the spacewalk to install thermal blankets over the Beta Gimbal Assemblies (BGAs) at the bases of the Space Station's solar panels. A glimpse is given into the difficulties of working in a microgravity environment as the crewmembers attempt to eat food before it floats away from them and drink water from a bag. The exchange of the Expedition 4 (Yuri I. Onufrienko, Carl E. Walz, and Daniel W. Bursch) for the Expedition 3 crew (Frank L. Culbertson, Mikhail Turin, and Vladimir N. Dezhurov) is also seen. The Endeavour undocks from the ISS, which is seen over the Caribbean Sea. Endeavour passes over Cuba, and footage of the Swiss Alps is shown. The video ends with the landing of the spacecraft.

Source record↗

SLS-Derived Lab: Precursor to Deep Space Human Exploration

Plans to send humans to Mars are in work and the launch system is being built. Are we ready? Robotic missions have successfully demonstrated transportation, entry, landing and surface operations but for human missions there are significant, potentially show-stopping issues. These issues, called Strategic Knowledge Gaps (SKGs) are the unanswered questions concerning long-duration exploration beyond low-earth-orbit. The gaps represent a risk of loss of life or mission and because they require extended exposure to the weightless environment outside earth's protective geo-magnetic field they cannot be resolved on the earth or on the International Space Station (ISS). Placing a laboratory at the relatively close and stable lunar Distant Retrograde Orbit (DRO) provides an accessible location with the requisite environmental conditions for conducting SKG research and testing mitigation solutions. Configurations comprised of multiple 3 meter and 4.3 meter diameter modules have been studied but the most attractive solution uses elements of the human Mars launch vehicle or Space Launch System (SLS) for a Mars proving ground laboratory. A shortened version of an SLS hydrogen propellant tank creates a Skylab-like pressure vessel that flies fully outfitted on a single launch. This not only offers significant savings by incorporating SLS pressure vessel development costs but avoids the expensive ISS approach using many launches with substantial on-orbit assembly before becoming operational. One of the most challenging SKGs is crew radiation protection; this is why SKG laboratory research is combined with Mars transit Habitat systems development. Fundamentally, the two cannot be divorced because using the habitat systems for protection requires actual hardware geometry and material properties intended to contribute to shielding effectiveness. The SKGs are difficult problems, solutions are not obvious, and require integrated, iterative, and multi-disciplinary development. A lunar DRO lab built from the launch system elements enables an early and representative transit habitat test bed necessary for closing gaps before sending humans on a 1000 day Mars mission.

Griffin, Brand↗

Plasmon-Induced Resonance Energy Transfer in Hybrid Nanomaterials

Plasmon-induced resonance energy transfer (PIRET) has emerged as a powerful mechanism for harnessing and redirecting plasmon energy before it dissipates into hot carriers or heat. By matching plasmon resonance frequencies with acceptor absorption bands, PIRET extends plasmon-driven processes beyond the charge transfer pathway, enabling selective energy flow into excitonic transitions. Here, this review highlights important progress in elucidating the fundamental plasmon decay processes and transitioning them into hybrid nanomaterials under PIRET. Employing specialized single-particle spectroscopic techniques based on scattering, extinction, and emission enables demonstration of PIRET in the face of competing mechanisms, such as interfacial charge transfer and thermalization. Finally, we complete this review by addressing strategies for active modulation of PIRET and present applications, ranging from plasmon photocatalysis to intracellular biochemical sensing.

Energy transfer↗

A model-independent data assimilation (MIDA) module and its applications in ecology

Abstract. Models are an important tool to predict Earth system dynamics. An accurate prediction of future states of ecosystems depends on not only model structures but also parameterizations. Model parameters can be constrained by data assimilation. However, applications of data assimilation to ecology are restricted by highly technical requirements such as model-dependent coding. To alleviate this technical burden, we developed a model-independent data assimilation (MIDA) module. MIDA works in three steps including data preparation, execution of data assimilation, and visualization. The first step prepares prior ranges of parameter values, a defined number of iterations, and directory paths to access files of observations and models. The execution step calibrates parameter values to best fit the observations and estimates the parameter posterior distributions. The final step automatically visualizes the calibration performance and posterior distributions. MIDA is model independent, and modelers can use MIDA for an accurate and efficient data assimilation in a simple and interactive way without modification of their original models. We applied MIDA to four types of ecological models: the data assimilation linked ecosystem carbon (DALEC) model, a surrogate-based energy exascale earth system model: the land component (ELM), nine phenological models and a stand-alone biome ecological strategy simulator (BiomeE). The applications indicate that MIDA can effectively solve data assimilation problems for different ecological models. Additionally, the easy implementation and model-independent feature of MIDA breaks the technical barrier of applications of data–model fusion in ecology. MIDA facilitates the assimilation of various observations into models for uncertainty reduction in ecological modeling and forecasting.

58 GEOSCIENCES↗

A model-independent data assimilation (MIDA) module and its applications in ecology

Models are an important tool to predict Earth system dynamics. An accurate prediction of future states of ecosystems depends on not only model structures but also parameterizations. Model parameters can be constrained by data assimilation. However, applications of data assimilation to ecology are restricted by highly technical requirements such as model-dependent coding. To alleviate this technical burden, we developed a model-independent data assimilation (MIDA) module. MIDA works in three steps including data preparation, execution of data assimilation, and visualization. The first step prepares prior ranges of parameter values, a defined number of iterations, and directory paths to access files of observations and models. The execution step calibrates parameter values to best fit the observations and estimates the parameter posterior distributions. The final step automatically visualizes the calibration performance and posterior distributions. MIDA is model independent, and modelers can use MIDA for an accurate and efficient data assimilation in a simple and interactive way without modification of their original models. We applied MIDA to four types of ecological models: the data assimilation linked ecosystem carbon (DALEC) model, a surrogate-based energy exascale earth system model: the land component (ELM), nine phenological models and a stand-alone biome ecological strategy simulator (BiomeE). The applications indicate that MIDA can effectively solve data assimilation problems for different ecological models. Additionally, the easy implementation and model-independent feature of MIDA breaks the technical barrier of applications of data–model fusion in ecology. MIDA facilitates the assimilation of various observations into models for uncertainty reduction in ecological modeling and forecasting.

Earth system dynamics↗

The Kinematic Navigation and Cartography Knapsack (KNaCK) LiDAR System: Overview and Applications.

Improved terrain characterization and navigation sensors and methods are needed to enhance crew safety, ISRU return, and scientific understanding of future landing sites. Specific to the Artemis Program and sustained exploration at the lunar South Pole, extreme low-angle solar illumination conditions pose significant challenges to existing photogrammetry-based robotic navigation. Additionally, a major challenge for navigation on the Moon and other planetary surfaces is the lack of Global Positioning and Navigation Systems (GPS or GNSS). Thus, there is a need for an alternative to image-based navigation that allow for precise and accurate mapping in GPS-denied environments on any planetary body. Here, we describe the Kinematic Navigation and Cartography Knapsack (KNaCK) LiDAR system; a backpack-mounted, mobile navigation and terrain mapping system that uses a velocity-sensing coherent light detection and ranging (LiDAR) system based on a frequency modulated continuous wave (FMCW) technique, contains minimal moving parts, and employs sophisticated positioning algorithms. During a traverse, this instrument emits light pulses to continually scan a scene to build a three-dimensional point cloud representation of topography. A measure of the Doppler-velocity at each of millions of range points sampled per second allows for a 6 degree of freedom (6- DoF) estimate of the sensor’s position and the development of novel position-from-velocity mapping and positioning algorithms for loop-closure in GPS denied environments. Included with paper is the video presentation for the Figure 2: FMCW-LiDAR sensor on Kinematic Navigation and Cartography Knapsack (KNaCK) (Aeva Aeries 1)

M. Zanetti↗

Systems design and comparative analysis of large antenna concepts

Conceptual designs are evaluated and comparative analyses conducted for several large antenna spacecraft for Land Mobile Satellite System (LMSS) communications missions. Structural configurations include trusses, hoop and column and radial rib. The study was conducted using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. The current capabilities, development status, and near-term plans for the IDEAS system are reviewed. Overall capabilities are highlighted. IDEAS is an integrated system of computer-aided design and analysis software used to rapidly evaluate system concepts and technology needs for future advanced spacecraft such as large antennas, platforms, and space stations. The system was developed at Langley to meet a need for rapid, cost-effective, labor-saving approaches to the design and analysis of numerous missions and total spacecraft system options under consideration. IDEAS consists of about 40 technical modules efficient executive, data-base and file management software, and interactive graphics display capabilities.

Garrett, L. B.↗

Impacts of Degradation on Water, Energy, and Carbon Cycling of the Amazon Tropical Forests

Selective logging, fragmentation, and understory fires directly degrade forest structure and composition. However, studies addressing the effects of forest degradation on carbon, water, and energy cycles are scarce. Here, we integrate field observations and high-resolution remote sensing from airborne lidar to provide realistic initial conditions to the Ecosystem Demography Model (ED-2.2) and investigate how disturbances from forest degradation affect gross primary production (GPP), evapotranspiration (ET), and sensible heat flux (H). We used forest structural information retrieved from airborne lidar samples (13,500 ha) and calibrated with 817 inventory plots (0.25 ha) across precipitation and degradation gradients in the eastern Amazon as initial conditions to ED-2.2 model. Our results show that the magnitude and seasonality of fluxes were modulated by changes in forest structure caused by degradation. During the dry season and under typical conditions, severely degraded forests (biomass loss ≥66%) experienced water stress with declines in ET (up to 34%) and GPP (up to 35%) and increases of H (up to 43%) and daily mean ground temperatures (up to 6.5°C) relative to intact forests. In contrast, the relative impact of forest degradation on energy, water, and carbon cycles markedly diminishes under extreme, multiyear droughts, as a consequence of severe stress experienced by intact forests. Our results highlight that the water and energy cycles in the Amazon are driven by not only climate and deforestation but also the past disturbance and changes of forest structure from degradation, suggesting a much broader influence of human land use activities on the tropical ecosystems.

54 ENVIRONMENTAL SCIENCES↗