Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Impact of internal crystalline boundaries on lattice thermal conductivity: Importance of boundary structure and spacing

The low thermal conductivity of nano-crystalline materials is commonly explained via diffusive scattering of phonons by internal boundaries. In this study, we have quantitatively studied phonon-crystalline boundaries scattering and its effect on the overall lattice thermal conductivity of crystalline bodies. Various types of crystalline boundaries such as stacking faults, twins, and grain boundaries have been considered in FCC crystalline structures. Accordingly, the specularity coefficient has been determined for different boundaries as the probability of the specular scattering across boundaries. Our results show that in the presence of internal boundaries, the lattice thermal conductivity can be characterized by two parameters: (1) boundary spacing and (2) boundary excess free volume. We show that the inverse of the lattice thermal conductivity depends linearly on a non-dimensional quantity which is the ratio of boundary excess free volume over boundary spacing. This shows that phonon scattering across crystalline boundaries is mainly a geometrically favorable process rather than an energetic one. Using the kinetic theory of phonon transport, we present a simple analytical model which can be used to evaluate the lattice thermal conductivity of nano-crystalline materials where the ratio can be considered as an average density of excess free volume. While this study is focused on FCC crystalline materials, where inter-atomic potentials and corresponding defect structures have been well studied in the past, the results would be quantitatively applicable for semiconductors in which heat transport is mainly due to phonon transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the filler morphology on the crystallization behavior and dielectric properties of the polyvinylidene fluoride‐based composite

Abstract Ceramic/polymer composites can be chemically stable, mechanically strong, and flexible, which make them candidates for electric devices, such as pressure or temperature sensors, energy storage or harvesting devices, actuators, and so forth. Depending on the application, various electrical properties are of importance. Polymers usually have low dielectric permittivity, but increased dielectric permittivity can be achieved by the addition of the ceramic fillers with high dielectric constant. With the aim to enhance dielectric properties of the composite without loss of flexibility, 5 wt% of BaTiO 3 ‐Fe 2 O 3 powder was added into a polyvinylidene fluoride matrix. The powder was prepared by different synthesis conditions to produce core/shell structures. The effect of the phase composition and morphology of the BaTiO 3 ‐Fe 2 O 3 core/shell filler on the structure and lattice dynamics of the polymer composites was investigated. Based on the results of the thermal analysis, various parameters of ceramic/polymer composites were determined. Differences in the phase composition and morphology of the filler have an influence on the formation of various polyvinylidene fluoride allomorphs and the degree of crystallinity. Furthermore, the dielectric performances of pure polyvinylidene fluoride and the polymer/ceramic composites were measured.

Polymer Science↗

Magnetic Properties of the Intermetallic Compound HoCuBi

We present an investigation on the intermetallic compound formed by HoCuBi which has a monoclinic crystalline P2 structure with lattice parameters; a = 9.8012(26) Å, b = 6.0647(6) Å, c = 6.1663(13) Å. In this report, we performed an extensive analysis of the magnetic characteristics, specific heat at low temperature mainly close to the region of the observed antiferromagnetic transition with Nèel temperature about 7 K, and to the field induced spin-crossover; the metamagnetic transition typically observed in antiferromagnetic systems by measurements of M-H, (Magnetization-Magnetic Field) at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Study of Half-Heusler Compounds MnVZ (Z = P, As, Sb)

Ab initio study of the half-Heusler compounds MnVZ (Z = P, As, Sb) is performed in the framework of Density Functional Theory (DFT). We have investigated their structural, elastic, mechanical, electronic, magnetic, and optical properties using the full potential linearly augmented plane wave (FP-LAPW) method. The compounds have stable structure with lattice constant in the range 4.90–5.75 Å. The correlation effects are incorporated by performing the GGA + U calculations. The compounds are ductile in nature as indicated by their elastic properties like Cauchy pressure (CP), Pugh’s and Poisson’s ratios. All the three compounds MnVZ (Z = P, As, Sb) are half-metals with small indirect band gaps in the spin-down channels of the values 0.74, 0.30, and 1.29 eV respectively at Γ −X symmetry points. These compounds possess relatively small total magnetic moments of about ≈ 1μ{sub B}. The analysis of optical properties reveals that these compounds are more active at small and high energies and show negligible activity at intermediate energies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of CuO{sub 2} Lattice Strain on the Electronic Structure and Properties of High-T{sub c} Cuprate Family

Doping and strain dependences of the electronic structure of the CuO{sub 6}-octahedra layer within LDA+GTB method in the frameworks of six-band p-d model are calculated. Band structure and Fermi surface of the quasiparticle excitations in the effective Hubbard model are characterized by inhomogeneous distribution of the k-dependent spectral weight. Doping results in reconstruction of the band structure, redistribution of the spectral weight over dispersion surface, and reconstruction of Fermi surface from small hole pockets in the underdoped region to large hole contour in the overdoped region through two quantum phase transitions (QPT). Strain increasing leads to displacement of the valence and conductivity bands, bandwidths decreasing, and shift of the concentrations corresponding to QPTs. Strain dependences of the antiferromagnetic exchange coupling and DOS at the Fermi level determining superconducting temperature T{sub c} are obtained. Effective exchange coupling in the equation for T{sub c} demonstrates monotonic strain dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and Magnetic Properties of the Ti-Doped Pyrochlore Molybdate Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7}

The structural, heat capacity, and magnetic properties of Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} were investigated in this work. Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} maintains the pyrochlore structure, but lattice constants are observed to decrease continuously with the Ti{sup 4+} doping. The magnetic measurements indicate a magnetic phase transition at low temperature for all Ti-doped samples, and the Ti{sup 4+} doping suppresses the transition temperature. This is ascribed to the diluted effect of nonmagnetic Ti{sup 4+} substitution of magnetic Mo{sup 4+}. The heat capacity data confirm that the low-temperature magnetic phase is spin glass in the Ti{sup 4+}-doped Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} system. The M(H) data reveals the coexistence of antiferromagnetic and ferromagnetic interactions at low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TEM study of the martensitic phases in the ductile DyCu and YCu intermetallic compounds [The martensitic phase transformation in ductile DyCu and YCu intermetallic compounds]

DyCu and YCu are representatives of the family of CsCl-type B2 rare earth intermetallic compounds that exhibit high room temperature ductility. Structure, orientation relationship, and morphology of the martensites in the equiatomic compounds DyCu and YCu are examined using transmission electron microscopy (TEM). TEM studies show that the martensite structures in DyCu and YCu alloys are virtually identical. The martensite is of orthorhombic CrB-type B33 structure with lattice parameters a = 0.38 nm, b = 1.22 nm, and c = 0.40 nm. (021¯) twins were observed in the B33 DyCu and YCu martensites. The orientation relationship of B33 and B2 phases is (111¯)[112]B33 || (110)[001]B2. The simulated electron diffraction patterns of the B33 phase are consistent with those of experimental observations. TEM investigations also reveal that a dominant orthorhombic FeB-type B27 martensite with lattice parameters a = 0.71 nm, b = 0.45 nm, and c = 0.54 nm exists in YCu alloy. (11¯ 1) twins were observed in the B27 YCu martensite. As a result, the formation mechanism of B2 to B33 and B2 to B27 phase transformation is discussed.

36 MATERIALS SCIENCE↗

Topological order in an exactly solvable 3D spin model

Research highlights: RHtriangle We study exactly solvable spin model with six-qubit nearest neighbor interactions on a 3D face centered cubic lattice. RHtriangle The ground space of the model exhibits topological quantum order. RHtriangle Elementary excitations can be geometrically described as the corners of rectangular-shaped membranes. RHtriangle The ground space can encode 4g qubits where g is the greatest common divisor of the lattice dimensions. RHtriangle Logical operators acting on the encoded qubits are described in terms of closed strings and closed membranes. - Abstract: We study a 3D generalization of the toric code model introduced recently by Chamon. This is an exactly solvable spin model with six-qubit nearest-neighbor interactions on an FCC lattice whose ground space exhibits topological quantum order. The elementary excitations of this model which we call monopoles can be geometrically described as the corners of rectangular-shaped membranes. We prove that the creation of an isolated monopole separated from other monopoles by a distance R requires an operator acting on {Omega}(R{sup 2}) qubits. Composite particles that consist of two monopoles (dipoles) and four monopoles (quadrupoles) can be described as end-points of strings. The peculiar feature of the model is that dipole-type strings are rigid, that is, such strings must be aligned with face-diagonals of the lattice. For periodic boundary conditions the ground space can encode 4g qubits where g is the greatest common divisor of the lattice dimensions. We describe a complete set of logical operators acting on the encoded qubits in terms of closed strings and closed membranes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational investigation of hydrogen-induced phonon changes in carbon fiber

Optical vibrational spectroscopy has shown promise as a noninvasive means of monitoring the mechanical properties of carbon fiber (CF), which is increasingly used for industrial and consumer purposes. However, interpretation of optical vibrational spectra for solid materials is inferential, particularly when defects are present. Because inelastic neutron scattering (INS) spectroscopy is not subject to selection rules, the full vibrational spectra can be measured. And, identifying correlations between INS features and tensile properties can assist in the interpretation of spectra from more commonly used optical vibrational spectroscopic techniques, such as Raman and infrared (IR) spectroscopy. Recent INS experiments on high-performance commercial carbon fibers showed features near 900 and 1100 cm –1 in addition to a broad feature near 3000 cm –1 that increased in intensity with decreasing tensile strength. These features were assigned to hydrogen defects. Here, we use density functional theory to simulate the INS spectra of several hydrogen defect geometries in graphite as a model for carbon fiber structure units, confirming the experimental assignment of these peaks to hydrogen modes and providing insights into the structure and lattice dynamics of the defects.

36 MATERIALS SCIENCE↗

Low-cost thermal/environmental barrier coatings: A first-principles study

Development of low-cost advanced thermal/environmental barrier coating (T/EBC) materials with acceptable thermal and mechanical properties is essential for safeguarding ceramic composites substrate against thermal and chemical degradation, thereby enhancing the efficiency of components in the high-temperature section of gas turbine engines. To this end, here we employed density functional theory-based approaches to predict the thermodynamic, mechanical, and thermal properties of rare earth disilicates based on abundant rare earth elements, namely La 2 Si 2 O 7 and Ce 2 Si 2 O 7 , as potential alternatives to the current-state-of-the-art ytterbium disilicate EBCs that uses expensive and scarce element Yb. The present study predicts that G-phase Ce 2 Si 2 O 7 has an ultralow thermal conductivity (0.26 W/m/K at 1500 K) and the apparent bulk coefficient of thermal expansion (ABCTE) (≈6.9x10 -6 K -1 ) slightly higher than SiC, demonstrating great potential as low-cost high-performance T/EBC. However, La 2 Si 2 O 7 and Ce 2 Si 2 O 7 undergo an A- to G-phase polymorphic transition at around 1470 K, resulting in significant changes to crystal structure and lattice parameters, and accordingly CTE and lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Determination of the stretch tensor for structural transformations

Structural transformations in crystalline solids are increasingly the basis of the functional behavior of materials. Both low hysteresis and reversibility of phase transformations have been linked to the satisfaction of the nongeneric conditions of compatibility between phases in diverse alloy systems. According to the Cauchy–Born rule, these conditions are expressed as properties of transformation stretch tensor. The transformation stretch tensor is difficult to measure directly due to the lack of knowledge about the exact transforming pathway during the structural change, and the complicating effects of microstructure. In this paper we give a rigorous algorithmic approach for determining the transformation stretch tensor from X-ray measurements of structure and lattice parameters. For some traditional and emerging phase transformations, the results given by the algorithm suggest unexpected transformation mechanisms.

42 ENGINEERING↗

Phase transformation of boron nitride under hypothermal conditions

Phase transformation among different boron nitride (BN) phases in hydrothermal solution was investigated. It was found that hexagonal boron nitride (hBN) firstly formed in the solution at relatively low temperature (i.e., 220 deg. C). After that, a spot of hBN began to transform into wurtzite boron nitride (wBN) and cubic boron nitride (cBN) at 230 deg. C. More and more hBN converted into wBN and cBN with the increase in temperature, and this transformation process completed at 300 deg. C. In this paper, we have explained the mechanism of the above phase transformation by using a reported 'puckering mechanism'. - Graphical abstract: Phase transformations from hBN to wBN and cBN happened with the temperature increasing from 230 to 300 deg. C under hypothermal conditions, and nearly pure cBN has been synthesized at 300 deg. C and 12 MPa.

36 MATERIALS SCIENCE↗

Density functional study on electronic and optical properties of C (or N)-doped cubic cerium dioxide

Density functional calculations were performed on electronic and optical properties of C (or N)-doped cubic cerium dioxide (CeO{sub 2}). When O is replaced by C (or N) in CeO{sub 2}, obvious band-gap (E{sub g}) reduction is observed. Meanwhile, it is interesting to find that the substitutional doping of C (or N) in CeO{sub 2} obviously increases the O 2p-Ce 4f transition intensity and also the refractive index. The increase in the O 2p-Ce 4f transition intensity on going from undoped, N-doped and C-doped CeO{sub 2} was related to the covalent character of the Ce-O bond. Compared with the undoped CeO{sub 2}, the C (or N)-doped CeO{sub 2}, with steep absorption peaks at lower energy, can be used for visible-light absorption applications. - Graphical abstract: By first-principles calculations, it is predicted that substitutional doping of C (or N) in c-CeO{sub 2} lowers E{sub g} and also O 2p-Ce 4f gap, and increases O 2p-Ce 4f transition intensity.

36 MATERIALS SCIENCE↗

On the solid solution of the spinel phase in the system NiO-Al{sub 2}O{sub 3}

The solid solubility of Al{sub 2}O{sub 3} in NiAl{sub 2}O{sub 4} spinel has been investigated by powder X-ray diffraction of samples prepared by solid state synthesis. The solid solution region found was in agreement with a previous report. The cubic cell parameter of the spinel solid solution was observed to decrease with increasing alumina content. Spinel with high alumina content was shown to be close to an inverse spinel as previously reported for stoichiometric NiAl{sub 2}O{sub 4} and the inversion parameter proved to be relatively independent of the overall composition. - Graphical abstract: The degree of inversion in the spinel solid solution in the system NiO-Al{sub 2}O{sub 3} has been investigated. The inversion was little influenced by the Al{sub 2}O{sub 3} content and decreases with increasing equilibrated temperature. At room temperature the spinel is close to inverse.

36 MATERIALS SCIENCE↗

Recrystallization of Cu-poor CuInS{sub 2} assisted by metallic Cu or Ag

We monitor the recrystallization of Cu-poor CuInS{sub 2} thin films assisted by pure Cu or pure Ag by means of real-time synchrotron-based polychromatic X-ray diffraction. In both cases a new microstructure is formed accompanied by an increase in grain size. In the case of Cu, the onset temperature of the thin-film recrystallization is higher than 370 deg. C. In the case of Ag, the thin-film recrystallization comes to an end at 270 deg. C. The Ag-assisted recrystallization occurs in the presence of the body-centered cubic beta-Ag{sub 2}S phase. We find that domain growth and diffusion of silver into the film occur simultaneously. - Graphical abstract Keywords: Recrystallization; Thin-film solar cells; Energy-dispersive x-ray diffraction: In-situ monitoring by means of energy-dispersive X-ray diffraction of the thin-film recrystallization of Cu-poor CuInS{sub 2} assisted by metallic Ag.

36 MATERIALS SCIENCE↗

Synthesis of new Ga{sub 7}Ge{sub 3}Te{sub 11}—One-dimensional phase in Ga–Ge–Te ternary system: Crystal structure and physical properties

Ga{sub 7}Ge{sub 3}Te{sub 11} single crystals were grown using transport in a temperature gradient. The prepared single crystals have a needle-like appearance, 1 to 40 μm in diameter and 2 to 20 mm in length. The Ga{sub 7}Ge{sub 3}Te{sub 11} single crystals were characterized by both single crystalline and powder X-ray diffraction. The structure consists of one-dimensional molecular strings bonded together through tellurium atoms by a weak bond of the van der Waals type. A large unit cell volume indicates the complexity of the structure. The room temperature theoretical density is 5.73 g cm{sup −3}. The compound shows semiconducting properties and possesses peculiar magnetic properties. - Graphical abstract: 1D Ga{sub 7}Ge{sub 3}Te{sub 11} - cross-view of the molecular string. - Highlights: • We prepared and characterized novel compound Ga{sub 7}Ge{sub 3}Te{sub 11}in single crystalline form. • Ga{sub 7}Ge{sub 3}Te{sub 11} is one-dimensional structure; orthorhombic lattice; space group Pnma. • Ga{sub 7}Ge{sub 3}Te{sub 11} is an intrinsic semiconductor; E{sub g}≅0.7 eV. • Ga{sub 7}Ge{sub 3}Te{sub 11} is paramagnetic with an effective magnetic moment of p{sub eff}=0.06 μ{sub B} per atom. • Crossover from para – to diamagnetism is observed in field dependence of susceptibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of C and Cr content on high-temperature microstructures of Fe-9Al-30Mn-xC-yCr alloys

This investigation elucidated the effects of C and Cr content on the high-temperature microstructures of Fe-9Al-30Mn-xC-yCr alloys by means of optical microscopy and transmission electron microscopy. With increasing Cr content, the phase transition sequence within the {alpha} phase was found to be {alpha} + B2 {yields} {alpha} + B2 + DO{sub 3} {yields} {alpha} + DO{sub 3}. And with increasing C content, a {gamma} {yields} ({gamma} + {kappa}) phase transition was observed within the {gamma} phase. The {kappa} phase carbides ((Fe,Mn){sub 3}AlC{sub x}) had an ordered L'1{sub 2}-type structure with lattice parameter a = 0.368 nm and were formed by a spinodal decomposition during quenching. The amounts of Cr{sub 7}C{sub 3} increased with the C and Cr content. Moreover, the Al and Mn content played important roles in expanding the ({alpha} + {gamma}) region. These features have not been previously reported in the Fe-Al-Mn-C-Cr alloy system.

36 MATERIALS SCIENCE↗