Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

An experimental investigation of fatigue damage in aluminum 2024-T3 alloys

Aluminum alloys are finding increasing use in the aerospace and automobile industries due to their attractive low density-high modulus and low density-high strength characteristics. Unfortunately, cyclic stress-strain deformation alters the microstructure of the material. These structural changes can lead to fatigue damage and ultimately service failure. Therefore, in order to assess the integrity of the alloy, a correlation between fatigue damage and a measurable microstructural property is needed. Aluminum 2024-T3, a commonly used commercial alloy, contains many grains (individual crystals) of various orientations. The sizes and orientations of these grains are known to affect the strength, hardness, and magnetic permeability of polycrystalline alloys and metals; therefore, perhaps a relationship between a grain property and the fatigue state can be established. Tension-compression cycling in aluminum alloys can also induce changes in their dislocation densities. These changes can be studied from measurements of the electrical resistivities of the materials. Consequently, the goals of this investigation were: to study the grain orientation of aluminum 2024-T3 and to seek a correlation between the grain orientation and the fatigue state of the material; and to measure the electrical resistivities of fatigued samples of aluminum 2024-T3 and to interpret the findings.

Ferguson, Milton W.↗
NASA NTRS2011

NASA Tech Briefs, June 2011

Topics covered include: Wind and Temperature Spectrometry of the Upper Atmosphere in Low-Earth Orbit; Health Monitor for Multitasking, Safety-Critical, Real-Time Software; Stereo Imaging Miniature Endoscope; Early Oscillation Detection Technique for Hybrid DC/DC Converters; Parallel Wavefront Analysis for a 4D Interferometer; Schottky Heterodyne Receivers With Full Waveguide Bandwidth; Carbon Nanofiber-Based, High-Frequency, High-Q, Miniaturized Mechanical Resonators; Ultracapacitor-Based Uninterrupted Power Supply System; Coaxial Cables for Martian Extreme Temperature Environments; Using Spare Logic Resources To Create Dynamic Test Points; Autonomous Coordination of Science Observations Using Multiple Spacecraft; Autonomous Phase Retrieval Calibration; EOS MLS Level 1B Data Processing Software, Version 3; Cassini Tour Atlas Automated Generation; Software Development Standard Processes (SDSP); Graphite Composite Panel Polishing Fixture; Material Gradients in Oxygen System Components Improve Safety; Ridge Waveguide Structures in Magnesium-Doped Lithium Niobate; Modifying Matrix Materials to Increase Wetting and Adhesion; Lightweight Magnetic Cooler With a Reversible Circulator; The Invasive Species Forecasting System; Method for Cleanly and Precisely Breaking Off a Rock Core Using a Radial Compressive Force; Praying Mantis Bending Core Breakoff and Retention Mechanism; Scoring Dawg Core Breakoff and Retention Mechanism; Rolling-Tooth Core Breakoff and Retention Mechanism; Vibration Isolation and Stabilization System for Spacecraft Exercise Treadmill Devices; Microgravity-Enhanced Stem Cell Selection; Diagnosis and Treatment of Neurological Disorders by Millimeter-Wave Stimulation; Passive Vaporizing Heat Sink; Remote Sensing and Quantization of Analog Sensors; Phase Retrieval for Radio Telescope and Antenna Control; Helium-Cooled Black Shroud for Subscale Cryogenic Testing; Receive Mode Analysis and Design of Microstrip Reflectarrays; and Chance-Constrained Guidance With Non-Convex Constraints.

Source record↗
DOE OSTI2017

Staged Z-pinch for the production of high-flux neutrons and net energy

A fusible target is embedded in a high Z liner, ohmically heated and then shock wave heated by implosion of an enveloping high Z liner. The target is adiabatically heated by compression, fusibly ignited and charged-particle heated as it is being ignited. A shock front forms as the liner implodes which shock front detaches from the more slowly moving liner, collides with the outer surface of the target, accelerates inward, rapidly heating the target, adiabatically compressing the target and liner and amplifying the current to converge the liner mass toward a central axis thereby compressing the target to a fusion condition when it begins to ignite and produce charged particles. The charged particles are trapped in a large magnetic field surrounding the target. The energy of the charged particles is deposited into the target to further heat the target to produce an energy gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1984

The thermal instability in a sheared magnetic field - Filament condensation with anisotropic heat conduction

The condensation-mode growth rate of the thermal instability in an empirically motivated sheared field is shown to depend upon the existence of perpendicular thermal conduction. This typically very small effect (perpendicular conductivity/parallel conductivity less than about 10 to the -10th for the solar corona) increases the spatial-derivative order of the compressible temperature-perturbation equation, and thereby eliminates the singularities which appear when perpendicular conductivity = 0. The resulting growth rate is less than 1.5 times the controlling constant-density radiation rate, and has a clear maximum at a cross-field length of order 100 times and a width of about 0.1 the magnetic shear scale for solar conditions. The profiles of the observable temperature and density perturbations are independent of the thermal conductivity, and thus agree with those found previously. An analytic solution to the short-wavelength incompressible case is also given.

Van Hoven, G.↗
NASA NTRS2011

Enhanced Spectral Anisotropies Near the Proton-Cyclotron Scale: Possible Two-Component Structure in Hall-FLR MHD Turbulence Simulations

Recent analysis of the magnetic correlation function of solar wind fluctuations at 1 AU suggests the existence of two-component structure near the proton-cyclotron scale. Here we use two-and-one-half dimensional and three-dimensional compressible MHD models to look for two-component structure adjacent the proton-cyclotron scale. Our MHD system incorporates both Hall and Finite Larmor Radius (FLR) terms. We find that strong spectral anisotropies appear adjacent the proton-cyclotron scales depending on selections of initial condition and plasma beta. These anisotropies are enhancements on top of related anisotropies that appear in standard MHD turbulence in the presence of a mean magnetic field and are suggestive of one turbulence component along the inertial scales and another component adjacent the dissipative scales. We compute the relative strengths of linear and nonlinear accelerations on the velocity and magnetic fields to gauge the relative influence of terms that drive the system with wave-like (linear) versus turbulent (nonlinear) dynamics.

Ghosh, Sanjoy↗
DOE OSTI2023

Diagnosis of 3D magnetic field and mode composition in MHD turbulence with Y -parameter

ABSTRACT Magnetic fields are crucial in numerous astrophysical processes within the interstellar medium (ISM). However, the detailed determination of magnetic field geometry is notoriously challenging. Based on the modern magnetohydrodynamic (MHD) turbulence theory, we introduce a novel statistical technique, the ‘Y-parameter’, to decipher the magnetic field inclination in the ISM and identify dominant turbulence modes. The Y-parameter, calculated as the ratio of anisotropies of different Stokes parameter combinations, displays contrasting trends with the mean-field inclination angle in Alfvénic and compressible turbulence modes. A Y-parameter value around 1.5 ± 0.5 provide a statistical boundary to determine the dominant MHD turbulence modes. We have discovered specific correlations between the Y-parameter value and the inclination angle that unveil the dominant turbulence mode. This methodology, when applied to future radio polarization surveys such as LOFAR and SKA, promises to significantly enhance our knowledge of 3D magnetic field in the ISM and improve our understanding of interstellar turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Nuclear magnetic resonance probe head design for precision strain control

Here, we present the design and construction of an NMR probe to investigate single crystals under strain at cryogenic temperatures. The probe head incorporates a piezoelectric-based apparatus from Razorbill Instruments that enables both compressive and tensile strain tuning up to strain values on the order of 0.3% with a precision of 0.001%. 75 As NMR in BaFe 2 As 2 reveals large changes to the electric field gradient and indicates that the strain is homogeneous to within 16% over the volume of the NMR coil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

FLUX CANCELLATION AND THE EVOLUTION OF THE ERUPTIVE FILAMENT OF 2011 JUNE 7

We investigate whether flux cancellation is responsible for the formation of a very massive filament resulting in the spectacular eruption on 2011 June 7. We analyze and quantify the amount of flux cancellation that occurs in NOAA AR 11226 and its two neighboring active regions (ARs 11227 and 11233) using line-of-sight magnetograms from the Heliospheric Magnetic Imager. During a 3.6 day period building up to the eruption of the filament, 1.7 × 10{sup 21} Mx, 21% of AR 11226's maximum magnetic flux, was canceled along the polarity inversion line (PIL) where the filament formed. If the flux cancellation continued at the same rate up until the eruption then up to 2.8 × 10{sup 21} Mx (34% of the AR flux) may have been built into the magnetic configuration that contains the filament plasma. The large flux cancellation rate is due to an unusual motion of the positive-polarity sunspot, which splits, with the largest section moving rapidly toward the PIL. This motion compresses the negative polarity and leads to the formation of an orphan penumbra where one end of the filament is rooted. Dense plasma threads above the orphan penumbra build into the filament, extending its length, and presumably injecting material into it. We conclude that the exceptionally strong flux cancellation in AR 11226 played a significant role in the formation of its unusually massive filament. In addition, the presence and coherent evolution of bald patches in the vector magnetic field along the PIL suggest that the magnetic field configuration supporting the filament material is that of a flux rope.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Internal stress distribution for generating closure domains in laser-irradiated Fe–3%Si(110) steels

Internal stress distribution for generating closure domains occurring in laser-irradiated Fe–3%Si(110) steels was investigated using high-energy X-ray analysis and domain theory based on the variational principle. The measured triaxial stresses inside the specimen were compressive and the stress in the rolling direction became more dominant than stresses in the other directions. The calculations based on the variational principle of magnetic energy for closure domains showed that the measured triaxial stresses made the closure domains more stable than the basic domain without closure domains. The experimental and calculation results reveal that the laser-introduced internal stresses result in the occurrence of the closure domains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Evolution of ground-state wave function in CeCoIn 5 upon Cd or Sn doping

We present linear polarization-dependent soft-x-ray absorption spectroscopy data at the Ce M 4,5 edges of Cd- and Sn-doped CeCoIn 5 . The 4f ground-state wave functions have been determined for their superconducting, antiferromagnetic, and paramagnetic ground states. The absence of changes in the wave functions in CeCo (In 1- x Cd x ) 5 suggests that the 4f-conduction-electron (c f) hybridization is not affected by global Cd doping, thus supporting the interpretation of magnetic droplets nucleating long-range magnetic order. This is contrasted by changes in the wave function due to Sn substitution. Increasing Sn in CeCo (In 1 - y Sn y ) 5 compresses the 4f orbitals into the tetragonal plane of these materials, suggesting enhanced c f hybridization with the in-plane In(1) atoms and a homogeneous altering of the electronic structure. As these experiments show, the 4 f wave functions are a very sensitive probe of small changes in the hybridization of 4f and conduction electrons, even conveying information about direction dependencies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Degradation of performance in Z-pinch implosions due to shell and magnetic-drive asymmetries

Achieving maximum performance in a Z-pinch Magnetized Liner Inertial Fusion (MagLIF) implosion requires high levels of symmetry to reach high pressures, high areal densities, and high efficiency energy coupling between the compressed fuel and the imploding shell. In this work, we present the development of a nonlinear model to describe an asymmetric MagLIF liner undergoing magneto-Rayleigh-Taylor (MRT) instabilities in the z = 0 plane. We investigate and present results from our model that show the degradation of the pressure at stagnation under various kinds of asymmetries that can arise during MagLIF experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Melting of iron by significant structure theory

From Eyring's method of significant structures, a partition function is derived for liquid iron. The solid at high temperature is described in the Einstein approximation. Magnetic and electronic contributions to the thermodynamic properties of both the liquid and solid phases are considered. The model is compatible with properties (thermal expansion, compressibility, heat capacity, entropy of melting, and volume change on melting) at one atm. The melting temperature at high pressure is found by satisfying the requirement that the Gibbs free energies of the liquid and solid phases are equal at the melting temperature. Under conditions at the earth's core-mantle boundary, the melting temperature of iron is greater than approximately 5000 K, and under inner-outer core conditions the melting temperature is greater than approximately 7000 K. These estimates are consistent with the Lindemann melting law, but not with the Kraut-Kennedy melting law.

Leppaluoto, D. A.↗
NASA NTRS1988

Growth of correlation in compressible two-dimensional magnetofluid turbulence

Spectral transfer has been proposed as the primary mechanism for generating outward-propagating Alfven waves in the solar wind. This process has been investigated extensively for imcompressible magnetofluids, but the issue of whether it occurs in compressible magnetofluids such as the solar wind remains unresolved. The results of direct numerical simulations of nonisentropic-compressible two-dimensional MHD turbulence indicate that, for systems with finite initial cross helicity, the correlation between the fluctuating velocity field and the fluctuating magnetic field grows as a function of time. This growth of correlation can be interpreted as a turbulent process, as shown by examination of modal wavenumber spectra.

Dahlburg, R. B.↗
NASA NTRS1991

Does ion tearing exist?

Theoretical models of reconnection in the geomagnetic tail and its relationship to the collisionless tearing mode are examined analytically. The focus is on attempts to remove the stabilizing effects of electron compressibility in the quasi-neutral sheet. It is shown that this goal can be achieved by introducing spatial diffusion of electrons across the magnetic-flux surfaces, but not by wave-turbulent pitch-angle scattering (Coroniti, 1980) or nonadiabatic stochastic first-invariant diffusion (Buechner and Zelenyi, 1988). Hence the ion tearing mode does not exist, but the electron tearing mode does.

Pellat, R.↗
NASA NTRS2005

Geotail Observations of the Spatial Dependence of Kelvin-Helmholtz Waves on an Inbound Passage through the Dusk Flank Boundary Layer

On August 1, 1998, the Geotail spacecraft made an inbound passage perpendicular to the dusk magnetopause at the dusk terminator when the interplanetary magnetic field had been very northward for more than 10 hours. Typical 3-minute-period Kelvin-Helmholtz waves were observed and the density in the boundary layer and magnetopause was observed to have an unusually high value near 5 /cc. Compressible MHD calculations using the measured values at Geotail yield substantial growth rates that support the idea that the magnetopause was Kelvin-Helmholtz unstable. In contrast to many previous events where a spacecraft remained in the boundary layer, this passage allowed study of how the waves varied with distance inward from the magnetopause. In a layer adjacent to the magnetosheath, rapid magnetic field fluctuations were seen with variations of at least 50 nT/s. Initially the boundary waves led to transitions between the magnetosheath and the fluctuating region with magnetosheath-like densities and tailward velocities, but as the spacecraft moved inward, the transitions were more likely to be between the fluctuating region and a hotter region with magnetosphere-like densities of 5kc. Gradually the velocity perturbations began to exhibit 360 degree rotations. Such rotations are similar to the vortices seen earlier by the ISEE spacecraft throughout the magnetotail which were suspected of being caused by Kelvin-Helmholtz instability of the boundary.

Fairfield, D. H.↗
DOE OSTI2022

Quasi-isentropic compression of an additively manufactured aluminum alloy to 14.8 GPa

We uniaxially and shocklessly compressed an additively manufactured aluminum alloy, laser powder bed fusion (LPBF) AlSi10Mg, to peak stresses ranging from 4.4 to 14.8 GPa at peak strain rates on the order of [Formula: see text] via a series of magnetic loading experiments to measure the principal isentrope, yield strength, and shear modulus as a function of material orientation and applied stress. We did not observe significant anisotropy in any of the measured quantities. We found that the principal isentrope, within the uncertainty and up to our peak stress, overlaps the material’s Hugoniot. We measured yield strengths and shear moduli ranging from 0.28 to 0.81 GPa and 36 to 52 GPa, respectively. Our results indicate that LPBF AlSi10Mg behaves similarly to wrought Al alloys under quasi-isentropic compression.

Brown, Nathan P.↗
DOE OSTI2015

Differential rotation in magnetized and non-magnetized stars

The effects of magnetic field on stellar differential rotation (DR) are studied by comparing magnetohydrodynamic (MHD) models and their hydrodynamic (HD) counterparts in the broad range of rotation rates and across varying initial rotation profiles. Fully compressible MHD simulations of rotating penetrative convection are performed in a full-spherical shell geometry. Critical conditions for the transition of the DR between a faster equator (solar type) and a slower equator (anti-solar type) are explored by focusing on the “Rossby number (Ro)” and the “convective Rossby number (Ro{sub conv}).” It is confirmed that the transition is more gradual and the critical value for it is higher in the MHD model than in the HD model in view of the Ro{sub conv} dependence. As observed in earlier studies, the rotation profile shows a bistability near the transition in the HD model, whereas it disappears when allowing the growth of magnetic fields except in the model taking the anti-solar-type solution as the initial condition. We find that the transition occurs at Ro≃1 both in the MHD and HD models independently of the hysteresis. Not only the critical value but also the sharpness of the transition is similar between the two models in view of the Ro dependence. The influences of the dynamo-generated magnetic field and/or the hysteresis on convective motion are reflected by Ro. This is why the transition is unified in view of the Ro dependence. We also discuss the Ro dependence of magnetic dynamo activities with emphasis on their possible relation to the kinetic helicity profile.

79 ASTRONOMY AND ASTROPHYSICS↗