SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Film structures in the Fe–Bi system have been studied experimentally. The magnetic state of the two-layer structures is shown by electron magnetic resonance to be dependent on the order of depositing magnetic and nonmagnetic layers. The three-layer structures demonstrate the effect of the exchange bias, the value of which is dependent on the bismuth interlayer thickness.
Highlights: • Neutron diffraction shows that CaSrFeCoO{sub 6–δ} has G-type antiferromagnetic order at 10 K. • Magnetic moments are along the shortest axis at 10 K, contrary to the Ca{sub 2}-analogue, Ca{sub 2}FeCoO{sub 6–δ}. • CaSrFeCoO{sub 6–δ} retains the same orientation of moments up to 300 K, contrary to Ca{sub 2}FeCoO{sub 6–δ}. • CaSrFeCoO{sub 6–δ} has the optimum composition for G-type order and retention of the moment orientation. - Abstract: With the aid of neutron diffraction, the magnetic structure of CaSrFeCoO{sub 6–δ} is determined at 10 K and 300 K. The vacancies, created due to oxygen-deficiency, are ordered in this material. In addition to structural order, neutron diffraction shows a long-range G-type antiferromagnetic order, where each magnetic moment is aligned antiparallel to all nearest neighbors. The orientation of moments is along the shortest unit cell axis at 10 K. The magnetic structure and orientation of moments remain unchanged up to room temperature. This is in contrast to the Ca{sub 2}-analogue, Ca{sub 2}FeCoO{sub 6–δ}, where the magnetic moments at 10 K are parallel to the longest axis and change their orientation when temperature is raised to room temperature. These differences highlight the ability to control the magnetic properties by tuning the structural parameters. Comparisons to similar materials show that CaSrFeCoO{sub 6–δ} has the optimum composition for G-type magnetic order and the retention of the moment orientation.
In this study, we investigated the effects of thickness, light polarization, and strain on the Raman spectra of two-dimensional (2D) Fe 3 GeTe 2 (FGT) crystals synthesized via chemical vapor transport. The crystals are thoroughly characterized using a combination of microscopic, diffraction, and spectroscopic techniques. Particularly, a systematic angle-resolved polarized Raman spectroscopy study reveals a clear polarization dependence of the Raman intensity in both parallel and crossed polarization directions, with the $A$$^{1}_{g}$ mode completely disappearing in the crossed polarization direction. The angle-dependent intensity of both the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes in parallel polarization and the intensity of the $E$$^{2}_{2g}$ mode in the crossed polarization remain constant at all angles. These findings align with predictions from Raman tensor analysis, providing compelling evidence for the unambiguous assignment of the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes to specific peaks observed in the Raman spectrum of FGT, resolving existing confusion in the literature regarding their assignment. Furthermore, we examine the effect of strain on the Raman spectrum of 2D FGT in-situ using a bending device. Our study, conducted on a monolayer to few-layer 2D FGT deposited onto polyethylene terephthalate and subjected to outward (inward), i.e., tensile (compressive) bending, demonstrates appreciable downshifting (upshifting) of the Raman peak position of both $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes. Furthermore, these findings are particularly significant given that strain engineering represents an effective approach to modulate the magnetic properties of FGT and other 2D magnetic materials.
A series of quaternary rare-earth containing thiosilicates with the general formula RE 2 EuSi 2 S 8 (RE = Ce–Nd, Sm, Gd, Tb) has been synthesized via the flux-assisted boron chalcogen mixture (BCM) crystal growth method. High-quality single crystals were obtained, and their crystal structures were determined by single-crystal X-ray diffraction. The RE 2 EuSi 2 S 8 series crystallizes in the trigonal system, adopting the space group R-3c. Polycrystalline samples were employed for physical property measurements, including magnetic susceptibility measurements, UV–visible diffuse reflectance, and photoluminescent response. Magnetic data of RE 2 EuSi 2 S 8 ( RE = Ce, Nd, and Gd) were collected over the 2–300 K temperature range. The samples were paramagnetic behavior with negative Weiss constants (θ W = −11.05, −10.55, and −1.35 K respectively). Their thermal stability was investigated using thermogravimetric analysis (TGA). Optical band gaps, estimated from diffuse reflectance spectra, were determined to be 2.2(1) eV for Ce 2 EuSi 2 S 8 , 1.8(1) eV for Nd 2 EuSi 2 S 8 , and 1.7(1) eV for Gd 2 EuSi 2 S 8 respectively. Finally, photoluminescence measurements were collected on Ce 2 EuSi 2 S 8 and Tb 2 EuSi 2 S 8 single crystals.
A novel routine is developed to produce nanostructured ceramic-based composites with enhanced mechanical properties and tailored magnetic behavior.
Remanent magnetization properties in alkalic igneous complexes at Magnet Cove and Potash Sulphur Spring, Ark., calculating paleomagnetic pole during Cretaceous
As previously reported, reflectance spectra of iron oxide precipitated as ultrafine particles, unlike ordinary fine grained hematite, have significant similarities to reflectance spectra from the bright regions of Mars. These particles were characterized according to composition, magnetic properties, and particle size distribution. Mossbauer, magnetic susceptibility, and optical data were obtained for samples with a range of concentrations of iron oxide in silica gel of varying pore diameters. To analyze the Mossbauer spectra, a versatile fitting program was enhanced to provide user friendly screen input and theoretical models appropriate for the superparamagnetic spectra obtained.
NeFeB type magnets have been proposed for use in free piston Stirling engine driven, linear alternators to generate electric power during long duration space missions. These type of materials provide the highest energy product commercial magnets, thus minimizing alternator size or mass, but do not provide the high temperature stability of magnetic properties found in the SmCo type magnets. Therefore, to apply the NeFeB type magnets at elevated temperatures to multiyear space missions, their long-term aging characteristics must be determined. This report presents 200 hr aging data for six types of NeFeB magnets selected from three manufacturers. Aging was performed under vacuum at 150 C, with a steady demagnetizing field of 5 kOe applied. From the data produced by this short-term aging run, candidate magnet types were selected for a planned 12,000 hr long-term run. Depending on the manufacturer's magnet type, remanence losses observed ranged from 0 to 7%, when measured at 120 C on an established recoil line. Also, intrinsic coercivity losses up to about 4% were observed for the M-H curve at 120 C. In some cases, these coercivity losses were not recoverable by recharge of the magnet, indicating a structural change of the material.
The designs of microscopic toroidal-core inductors in integrated circuits of DC-to-DC voltage converters would be modified, according to a proposal, by filling the gaps in the cores with permanent magnets that would apply bias fluxes (see figure). The magnitudes and polarities of the bias fluxes would be tailored to counteract the DC fluxes generated by the DC components of the currents in the inductor windings, such that it would be possible to either reduce the sizes of the cores or increase the AC components of the currents in the cores without incurring adverse effects. Reducing the sizes of the cores could save significant amounts of space on integrated circuits because relative to other integrated-circuit components, microinductors occupy large areas - of the order of a square millimeter each. An important consideration in the design of such an inductor is preventing magnetic saturation of the core at current levels up to the maximum anticipated operating current. The requirement to prevent saturation, as well as other requirements and constraints upon the design of the core are expressed by several equations based on the traditional magnetic-circuit approximation. The equations involve the core and gap dimensions and the magnetic-property parameters of the core and magnet materials. The equations show that, other things remaining equal, as the maximum current is increased, one must increase the size of the core to prevent the flux density from rising to the saturation level. By using a permanent bias flux to oppose the flux generated by the DC component of the current, one would reduce the net DC component of flux in the core, making it possible to reduce the core size needed to prevent the total flux density (sum of DC and AC components) from rising to the saturation level. Alternatively, one could take advantage of the reduction of the net DC component of flux by increasing the allowable AC component of flux and the corresponding AC component of current. In either case, permanent-magnet material and the slant (if any) and thickness of the gap must be chosen according to the equations to obtain the required bias flux. In modifying the design of the inductor, one must ensure that the inductance is not altered. The simplest way to preserve the original value of inductance would be to leave the gap dimensions unchanged and fill the gap with a permanent- magnet material that, fortuitously, would produce just the required bias flux. A more generally applicable alternative would be to partly fill either the original gap or a slightly enlarged gap with a suitable permanent-magnet material (thereby leaving a small residual gap) so that the reluctance of the resulting magnetic circuit would yield the desired inductance.
Magnetically controlled states in quantum materials are central to their unique electronic and magnetic properties. However, direct momentum-resolved visualization of these states via angle-resolved photoemission spectroscopy (ARPES) has been hindered by the disruptive effect of magnetic fields on photoelectron trajectories. Here, we introduce an in situ method that is, in principle, capable of applying magnetic fields up to 1 T. This method uses substrates composed of nanomagnetic metamaterial arrays with alternating polarity. Such substrates can generate strong, homogeneous, and spatially confined fields applicable to samples with thicknesses up to the micron scale, enabling ARPES measurements under magnetic fields with minimal photoelectron trajectory distortion. Here, we demonstrate this minimal distortion with ARPES data taken on monolayer graphene. Our method paves the way for probing magnetic field-dependent electronic structures and studying field-tunable quantum phases with state-of-the-art energy-momentum resolutions.
Elastomeric materials represent an important class of engineering materials, which are widely used to make components of structures, machinery, and devices for vibration and noise control. Elastomeric material possessing conductive or magnetic properties have been widely used in applications such as conductive and magnetic tapes, sensors, flexible permanent magnets, etc. Our interest in these materials has focussed on understanding and controlling the magnitude and directionality of their response to applied magnetic fields. The effect of magnetic fields on the mechanical properties of these materials has not been the subject of many published studies. Our interest and expertise in controllable fluids have given us the foundation to make a transition to controllable elastomers. Controllable elastomers are materials that exhibit a change in mechanical properties upon application of an external stimuli, in this case a magnetic field. Controllable elastomers promise to have more functionality than conventional elastomers and therefore could share the broad industrial application base with conventional elastomers. As such, these materials represent an attractive class of smart materials, and may well be a link that brings the applications of modern control technologies, intelligent structures and smart materials to a very broad industrial area. This presentation will cover our research work in the area of controllable elastomers at the Thomas Lord Research Center. More specifically, the presentation will discuss the control of mechanical properties and mathematical modeling of the new materials prepared in our laboratories along with experiments to achieve adaptive vibration control using the new materials.
In this work, nano and micro scales of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} ceramics are prepared by sol-gel and solid-state reaction methods. In order to investigate the dependency of the magnetic properties on the size variation of as-prepared samples, their magnetic entropy change (ΔS{sub M}) at different magnetic fields and temperatures are fitted by Lorentz universal function. The obtained results confirmed the size impression on magneto-caloric properties, in spite of proving significant influence on some parameters related to the refrigeration system.
Spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} (0.0 ≤ y ≤ 1.0) ferrite magnetic nanoparticles (MNPs) were synthesized by a sol-gel combustion method using urea as the reducing agent/fuel. Powder X-ray diffraction (XRD) analysis revealed the formation of cubic spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} powders and confirmed pure crystalline phase and the average crystalline size of 21.25 to 17.04 nm. Functional group bonds between metal and oxygen (M–O) were confirmed by Fourier transform infrared (FT-IR) spectra. The microstructure of the powders was recorded by high-resolution scanning electron microscope (HR-SEM) and confirmed the particle-like surface morphology with smaller agglomeration, due to the magnetic interaction of the particles. Energy-dispersive X-ray (EDX) results showed the composition of the expected elements and confirmed the phase purity of the products. Vibrating sample magnetometer (VSM) technique recorded at room temperature was used to analyse the magnetic properties of the samples and the hysteresis loops showed the ferromagnetic behaviour. Moreover, the samples Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} NPs were tested for the photocatalytic degradation (PCD) of methylene blue (MB) dye and the sample y = 0.6 showed maximum degradation efficiency (96.83 %), due to the smaller particle size with higher surface area than other compositions. Furthermore, spinel Mg{sub 1−y}Ni{sub y}Fe{sub 2}O{sub 4} nano-photocatalysts can be reused several times without change of its catalytic activity.
Magnetic separations present a promising approach for the recovery of rare earth (RE) elements from mixtures, particularly when coupled with precipitation techniques that enhance process efficiency and selectivity. However, the magnetic properties of RE materials typically encountered in the separations industry are not well characterized. Here, we synthesized a series of RE materials, combining four REs – praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy) – with three precipitating agents – hydroxide, oxalate, and dibutyl phosphate. All materials showed typical paramagnetic behavior consistent with the Curie-Weiss law. At low temperatures, we observed weak antiferromagnetic correlations, which were more pronounced for the lighter RE ions (Pr, Nd). Particle morphology and crystallography analyses showed that the dibutyl phosphates were well-ordered metal-organic frameworks, the oxalates were crystals with mixed hydration states, and the hydroxides were mostly amorphous. Regardless of the degree of crystallinity, the effective magnetic moments aligned well with theoretical estimates based on Hund's rules and 4f electron configurations of the corresponding RE ions. For a given RE ion, the magnetophoretic response was thus determined by the size of the particles rather than specific metal-ligand coupling, with dibutyl phosphate promoting the formation of larger crystals that were the most strongly attracted to magnets.
The electrical, magnetic, and optical properties of charge-transfer salts containing tetrathiafulvalene (TTF) and the pseudohalides, thiocyanate (SCN) and selenocyanate (SeCN), have been investigated. These salts are quasi-one-dimensional compounds containing cation radicals only, in contrast to a cation-radical-anion-radical system, such as tetrathiafulvalene tetracyanoquinodimethane (TTF) (TCNQ). Measurements of electrical conductivity, thermoelectric power, and optical reflectivity of single crystals of the nonstoichiometric salts (TTF)12(SCN)7 and (TTF)12(SeCN)7 show metal-like characteristics above 200 K (high-temperature region). The conductivities at room temperature are approximately 750 mho/cm comparable to those found in (TTF) (TCNQ), and increase with decreasing temperature down to approximately 200 K. The thermoelectric power at room temperature is small and positive (approximately 9 microvolts/deg K), and decreases linearly with decreasing temperature in this region (as expected for metal-like hole conduction along the TTF chains). The ESR intensity, however, decreases with decreasing temperature above 200 K. At 170 K a metal-nonmetal transition occurs, and the transport and magnetic properties below this temperature are characteristic of a semiconducting state.
Samples of a superconducting indium nanocomposite based on a thin-film porous dielectric matrix prepared by the Langmuir–Blodgett method are obtained for the first time, and their low-temperature electrophysical and magnetic properties are studied. Films with thickness b ≤ 5 μm were made from silicon dioxide spheres with diameter D = 200 and 250 nm; indium was introduced into the pores of the films from the melt at a pressure of P ≤ 5 kbar. Thus, a three-dimensional weakly ordered structure of indium nanogranules was created in the pores, forming a continuous current-conducting grid. Measurements of the temperature and magnetic field dependences of the resistance and magnetic moment of the samples showed an increase in the critical parameters of the superconductivity state of nanostructured indium (critical temperature T{sub c} ≤ 3.62 K and critical magnetic field H{sub c} at T = 0 K H{sub c}(0) ≤ 1700 Oe) with respect to the massive material (T{sub c} = 3.41 K, H{sub c}(0) = 280 Oe). In the dependence of the resistance on temperature and the magnetic field, a step transition to the superconductivity state associated with the nanocomposite structure was observed. A pronounced hysteresis M(H) is observed in the dependence of the magnetic moment M of the nanocomposite on the magnetic field at T < T{sub c}, caused by the multiply connected structure of the current-conducting indium grid. The results obtained are interpreted taking into account the dimensional dependence of the superconducting characteristics of the nanocomposite.
Abstract Optical control of the magnetic properties in topological insulator systems is an important step in applying these materials in ultrafast optoelectronic and spintronic schemes. In this work, we report the experimental observation of photo-induced magnetization dynamics in the magnetically doped topological insulator (MTI)/antiferromagnet (AFM) heterostructure composed of Cr-(Bi,Sb) 2 Te 3 /CrSb. Through proximity coupling to the AFM layer, the MTI displays a dramatically enhanced magnetism, with robust perpendicular magnetic anisotropy. When subjected to intense laser irradiation, both surface and bulk magnetism of the MTI are weakened by laser-induced heating of the lattice, however, at the surface, the deleterious heat effect is compensated by the strengthening of Dirac-hole-mediated exchange coupling as demonstrated by an unconventional pump-fluence-dependent exchange-bias effect. Through theoretical analyses, the sizes of exchange coupling energies are estimated in the MTI/AFM bilayer structure. The fundamentally different mechanisms supporting the surface and bulk magnetic order in MTIs allow a novel and distinctive photo-induced transient magnetic state with antiparallel spin configuration, which broadens the understanding of the magnetization dynamics of MTIs under ultrashort and intense optical excitation.
The anomalous Hall effect (AHE), typically observed in ferromagnetic (FM) metals with broken time-reversal symmetry, depends on electronic and magnetic properties. In Co 3 Sn 2-x In x S 2 , a giant AHE has been attributed to Berry curvature associated with the FM Weyl semimetal phase, yet recent studies report complicated magnetism. We use neutron scattering to determine the spin dynamics and structures as a function of x and provide a microscopic understanding of the AHE and magnetism interplay. Spin gap and stiffness indicate a contribution from Weyl fermions consistent with the AHE. The magnetic structure evolves from c-axis ferromagnetism at x = 0 to a canted antiferromagnetic (AFM) structure with reduced c-axis moment and in-plane AFM order at x = 0.12 and further reduced c-axis FM moment at x = 0.3. Since noncollinear spins can induce non-zero Berry curvature in real space acting as a fictitious magnetic field, our results revealed another AHE contribution, establishing the impact of magnetism on transport.