Microstructure-property relationship for AISI 304/308L stainless steel laser weldment
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Precipitation-strengthened Ni-based superalloys are leading candidate materials for advanced ultra-supercritical (A-USC) plants with steam conditions up to 760 °C (1400 °F) and 35 MPa (5 ksi). This study evaluates representative specimens from a large casting of Haynes 282 to study the effect of microstructural heterogeneity on the mechanical behavior of this alloy. The tensile test results of cast Haynes 282 over the temperature range 20–816 °C exhibited lower tensile strength and ductility in comparison with the reference wrought Haynes 282. However, the creep rupture tests of the cast alloy below 704–788 °C and 190–431 MPa presented a similar stress-Larson-Miller parameter to that of the wrought material. Microstructural and dislocation characterizations using scanning electron microscopy, conventional transmission electron microscopy, and scanning transmission electron microscopy in conjunction with energy dispersive X-ray spectroscopy were performed to understand the microstructural evolution before and after the mechanical tests. The heterogeneous microstructures of the cast Haynes 282 material, including the coarse grains, potential casting defects, and a bimodal size distribution of γ' precipitates, were detrimental to the tensile behavior, whereas the coarse-scale grains had a positive effect on the creep performance because diffusional creep was the dominant creep mechanism.
Here, the chloride-induced stress corrosion cracking (CISCC) mechanism of cold spray (CS) coating on a galvanically similar substrate is investigated. Arc welded 304L stainless steel (SS) specimens are loaded into four-point bend fixtures, cold sprayed with 304L SS, then immersed in boiling MgCl 2 . Interconnected porosity forms through crevice corrosion along CS splat boundaries, allowing corrosive species to penetrate through the CS layer. Nevertheless, the substrate is resistant to CISCC likely because of compressive stress introduced by peening during CS particle impacts. These findings underscore the importance of residual stress in the environmental degradation of CS coatings or repairs of engineering structures.
Organic-inorganic metal halide hybrids are an important class of crystalline materials with exceptional structural and property tunability. Recently metal halide perovskites with ABX 3 structure have been extensively investigated as new generation semiconductors for various optoelectronic devices, including photovoltaic cells, light emitting diodes, photodetectors, and lasers, for their exceptional optical and electronic properties. By controlling the morphological dimensionality, low dimensional metal halide perovskites, including 2D perovskite nanoplatelets, 1D perovskite nanowires, and 0D perovskite quantum dots, have been developed to exhibit distinct properties from their bulk counterparts, due to quantum size effects. Besides ABX 3 perovskites, organic-inorganic metal halide hybrids, containing the same fundamental building block of metal halide octahedra (BX 6 ), can also be assembled to possess other types of crystallographic structures. Using appropriate organic and inorganic components, low dimensional organic-inorganic metal halide hybrids with 2D, quasi-2D, corrugated-2D, 1D, and 0D structures at the molecular level have been developed and studied. Due to the strong quantum confinement and site isolation, these low dimensional metal halide hybrids at the molecular level exhibit remarkable and unique properties that are significantly different from those of ABX 3 perovskites. In light of the rapid development of low dimensional metal halide perovskites and hybrids, it is indeed timely to review the recent progress in these areas. Also, there is a need to clarify the difference between morphological low dimensional metal halide perovskites and molecular level low dimensional metal halide hybrids, as currently the terminologies of low dimensional perovskites are not appropriately used in many cases. Finally, in this review article, we discuss the synthesis, characterization, application, and computational studies of low dimensional metal halide perovskites and hybrids.
In this paper, we report the formation of partially amorphous Mn-Si precipitates due to laser welding of face centered cubic (fcc) 304 stainless steel. Transmission electron microscopy and precession electron diffraction studies in the heat affected zone (HAZ) of the weldment indicate the formation of these precipitates in grain interiors. Precipitates have MnSi stoichiometry and the partially crystalline regions have a lattice constant of 0.45 nm. It is surmised that the rapid cooling rates during the laser weld melt pool solidification process may be sufficient to inhibit the complete crystallization of these precipitates.
Not Available
Here, second phase intermetallic particles in an advanced accident-tolerant FeCrAl (Fe-13Cr-5Al-2Mo) alloy are formed in the α-Fe matrix during processing. These particles are prominently related to the added Y. Neutron irradiation to ~7 displacements per atom (dpa) with a dose rate of ~8.16 × 10 -7 dpa/s at 282 °C resulted in the amorphization of these precipitates which could degrade the mechanical properties of the FeCrAl alloys. Analytical electron microscopy and diffraction analysis combined with structural freedom analysis have been used to investigate the radiation resistance of the second phase particles. Radiation tolerance is closely linked to the particle Fe-Y content and can be tailored using the structure freedom value.
Na 2 OsO 4 is an unusual quantum material that, in contrast to the common 5d 2 oxides with spins = 1, owns a magnetically silent ground state with spin = 0 and a band gap at Fermi level attributed to a distortion in the OsO 6 octahedral sites. In this semiconductor, our low-temperature electrical transport measurements indicate an anomaly at 6.3 K with a power-law behavior inclining through the semiconductor-to-metal transition observed at 23 GPa. Even more peculiarly, we discover that before this transition, the material becomes more insulating instead of merely turning into a metal according to the conventional wisdom. Furthermore, to investigate the underlying mechanisms, we applied experimental and theoretical methods to examine the electronic and crystal structures comprehensively, and conclude that the enhanced insulating state at high pressure originates from the enlarged distortion of the OsO 6 . It is such a distortion that widens the band gap and decreases the electron occupancy in Os’s t 2 g orbital through an interplay of the lattice, charge, and orbital in the material, which is responsible for the changes observed in our experiments.
All-inorganic lead-free halide double perovskites offer a promising avenue toward non-toxic, stable optoelectronic materials, properties that are missing in their prominent lead-containing counterparts. Their large thermopowers and high carrier mobilities also make them promising for thermoelectric applications. Here, in this work, we present a first-principles study of the lattice vibrations and thermal transport behaviors of Cs 2 SnI 6 and γ-CsSnI 3 , two prototypical compounds in this materials class. We show that conventional static zero temperature density functional theory (DFT) calculations severely underestimate the lattice thermal conductivities (κ l ) of these compounds, indicating the importance of dynamical effects. By calculating anharmonic renormalized phonon dispersions, we show that some optic phonons significantly harden with increasing temperature (T), which reduces the scattering of heat carrying phonons and enhances calculated κ l values when compared with standard zero temperature DFT. Furthermore, we demonstrate that coherence contributions to κ l , arising from wave like phonon tunneling, are important in both compounds. Overall, calculated κ l with temperature-dependent interatomic force constants, built from particle and coherence contributions, are in good agreement with available measured data, for both magnitude and temperature dependence. Large anharmonicity combined with low phonon group velocities yield ultralow values, with room temperature values of 0.26 W/m-K and 0.72 W/m-K predicted for Cs 2 SnI 6 and γ-CsSnI 3 , respectively. We further show that the lattice dynamics of these compounds are highly anharmonic, largely mediated by rotation of the SnI6 octahedra and localized modes originating from Cs rattling motion. These thermal characteristics combined with their previously computed excellent electronic properties make these perovskites promising candidates for optoelectronic and room temperature thermoelectric applications.
Sulfur species dissolution, precipitation and phase transformation during the charge and discharge process strongly affect the performance of lithium sulfur (Li–S) batteries. Interface properties between electrode and electrolyte play an important role in these batteries. Four kinds of binders with different functionalities, which differs both in chemical and electrical properties, are employed to study how the interface properties affect the battery reaction mechanism. The phase transformation of sulfur species is studied in detail. Remarkable differences are observed among sulfur cathodes with different binders. More solid-phase sulfur species precipitation is observed with binders that have carbonyl functional groups, like poly(9, 9-dioctylfluorene-co-fluorenone-co-methylbenzoic ester) (PFM) and poly(vinylpyrrolidone) (PVP), in both fully charged and discharged states. Also, the improved conductivity from introducing conductive binders greatly promotes sulfur species precipitation. These findings suggest that the contributions from functional groups affinity and binder conductivity lead to more sulfur transformation into the solid phase, so the shuttle effect can be greatly reduced, and a better cell performance can be obtained.
Here, phonon scattering by point defects via mass differences and strain fluctuations could effectively reduce the lattice thermal conductivity. The atomic mass difference can be maximized by introducing the vacancies thus leading to a significant phonon scattering. Usually, the vacancies are introduced by tuning the stoichiometry or forming solid solution with certain compound that contains intrinsically high concentration of vacancies. In this work, we demonstrate that vacancies can be effectively induced by the self-compensation effect via chemical doping. Indium (In) vacancies in InSb were induced by Te-doping and a substantial reduction in thermal conductivity was observed. Room temperature lattice thermal conductivity of the melted and then hot-pressed InSb (without In vacancies) is ~ 14.5 W m –1 K –1 but only ~ 3.8 W m –1 K –1 for InSb 0.96 Te 0.04 (with In vacancies), a reduction of ~ 74%. The advantage of using this strategy for phonon engineering lies in the fact that a substantial reduction in thermal conductivity can be achieved even when the dopant concentration is rather low. Since the self-compensation effect is widely observed in different compounds, it indicates that the vacancy engineering strategy used here is also applicable to a variety of other materials to effectively reduce the lattice thermal conductivity.