Search NASA⌕ Search

SEARCH · Search NASA

Results for “MINORITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Phase Characteristics of a Number of U-Pu-Am-Np-Zr Metallic Alloys for Use as Fast Reactor Fuels

Metallic fuel alloys consisting of uranium, plutonium, and zirconium with minor additions of americium and neptunium are under evaluation for potential use to transmute long-lived transuranic actinide isotopes in fast reactors. A series of test designs for the Advanced Fuel Cycle Initiative (AFCI) have been irradiated in the Advanced Test Reactor (ATR), designated as the AFC-1 and AFC-2 designs. Metal fuel compositions in these designs have included varying amounts of U, Pu, Zr, and minor actinides (Am, Np). Investigations into the phase behavior and relationships based on the alloy constituents have been conducted using x-ray diffraction and differential thermal analysis. Results of these investigations, along with proposed relationships between observed behavior and alloy composition, are provided. In general, observed behaviors can be predicted by a ternary U-Pu-Zr phase diagram, with transition temperatures being most dependent on U content. Furthermore, the enthalpy associated with transitions is strongly dependent on the as-cast microstructural characteristics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Core materials development for the fuel cycle R&D program

The Fuel Cycle Research and Development program is investigating methods of burning minor actinides in a transmutation fuel. One of the challenges of achieving this goal is to develop fuels capable of reaching extreme burnup levels (e.g. 40%). To achieve such high burnup levels’ fast reactor core materials (cladding and duct) must be able to withstand very high doses (>300 dpa design goal) while in contact with the coolant and the fuel. Thus, these materials must withstand radiation effects that promote low temperature embrittlement, radiation induced segregation, high temperature helium embrittlement, swelling, accelerated creep, corrosion with the coolant, and chemical interaction with the fuel (FCCI). To develop and qualify materials to a total fluence greater than 200 dpa requires development of advanced alloys and irradiations in fast reactors to test these alloys. Test specimens of ferritic/martensitic alloys (T91/HT-9) previously irradiated in the FFTF reactor up to 210 dpa at a temperature range of 350– 750 °C are presently being tested. This includes analysis of a duct made of HT-9 after irradiation to a total dose of 155 dpa at temperatures from 370 to 510 °C. Compact tension, charpy and tensile specimens have been machined from this duct and mechanical testing as well as SANS and Mossbauer spectroscopy are currently being performed. Initial results from compression testing and Charpy testing reveal a strong increase in yield stress (~400 MPa) and a large increase in DBTT (up to 230 °C) for specimens irradiated at 383 °C to a dose of 28 dpa. Less hardening and a smaller increase in DBTT was observed for specimens irradiated at higher temperatures up to 500 °C. Advanced radiation tolerant materials are also being developed to enable the desired extreme fuel burnup levels. Specifically, coatings are being developed to minimize FCCI, and research is underway to fabricate large heats of radiation tolerant oxide dispersion steels with homogeneous oxide dispersions.

Maloy, S. A.↗

Redox-Dependent Solubility of Technetium in Low Activity Waste Glass

The solubility of technetium was measured in a Hanford low activity waste glass simulant. The simulant glass was melted, quenched and pulverized to make a stock of powdered glass. A series of glass samples were prepared using the powdered glass and varying amounts of solid potassium pertechnetate. Samples were melted at 1000°C in sealed fused quartz ampoules. After cooling, the bulk glass and the salt phase above the glass (when present) were sampled for physical and chemical characterization. Technetium was found in the bulk glass up to 2000 ppm (using the glass as prepared) and 3000 ppm (using slightly reducing conditions). The chemical form of technetium obtained by x-ray absorption near edge spectroscopy can be mainly assigned to isolated Tc(IV), with a minority of Tc(VII) in some glasses and TcO 2 in two glasses. The concentration and speciation of technetium depends on glass redox and amount of technetium added. Solid crystals of pertechnetate salts were found in the salt cake layer that formed at the top of some glasses during the melt.

LAW glass↗

Postirradiation examination on metallic fuel in the AFC-2 irradiation test series

In this paper, irradiation experiments on metallic fuel alloys containing rare earth additions to simulate potential carry-over from pyro-metallurgical reprocessing and minor actinide additions were performed in the Idaho National Laboratory Advanced Test Reactor. These tests were designated AFC-2A and AFC-2B. Additionally irradiation experiments were also performed on metallic fuel alloys containing minor actinide additions that were fabricated by different techniques. These tests were designated AFC-2E. These pins were removed from the reactor after achieving burnups between 6 and 11% fission per initial heave metal atom. Examination of these pins revealed that they were unintentionally operated beyond their desired power and temperature conditions. Highlights from the postirradiation examination of these experiments is discussed. A variety of issue contributed to the poor performance of these irradiation tests including capsule design, reactor power variations and fabrication issues. While all the issues contributed, the major issue was determined to be unanticipated variations in reactor power. Through comparisons between these experiments and historical off-normal experiments, it was possible to conclude bound the operating temperatures of these experiments. There likely was some in-pile melting in the rare earth addition experiments (AFC-2A, AFC-2B), but it is not likely that there was in-pile melting in the fabrication technique experiments (AFC-2E).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of fluidized bed chemical vapor deposition ZrC coatings on PyC/YSZ kernels deposited under differing conditions

In this study, coated fuel particle architectures with ZrC coatings are candidate fuels for advanced power reactors and space nuclear propulsion (SNP) concepts. Owing to its relevance to SNP, the composition, microstructure, and mechanical properties of eight ZrC coatings prepared by fluidized bed chemical vapor deposition were evaluated. Evaluation by SEM and EBSD showed that all grains were columnar. Across the various examined samples, minor axis diameters varied between 0.3 and 1.1 μm, and major axis diameters varied between 0.4 and 2.3 μm. Major and minor diameters increased with thickness particularly at higher deposition temperatures in which the major grain axis (from an ellipse fit to the grain shape) increased by 2.5 μm over the entire coating. Coatings with higher reactive gas flows and Zr/C concentrations closer to 1 were observed to contain nanocrystalline graphite deposits. Reactive gas flow doubling led to increases in coating thickness from around 10–15 μm to around 22–27 μm.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase stability of some actinides with brannerite structure at high pressures

Structure behavior of actinide brannerites ThTi{sub 2}O{sub 6}, Y{sub 0.5}U{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}O{sub 6} and their analog oxide CeTi{sub 2}O{sub 6} was studied at high pressure by using in situ x-ray diffraction, Raman scattering and infra-red absorption techniques, respectively. Brannerite structure was found to be not stable and started to become amorphous at pressures above 20 GPa. Some minor crystalline phase(s) due to phase decomposition was observed in all the three samples during pressurization. In addition, the observed bulk modulus indicated that the actinide-bearing brannerites are more compressible than their analog compound CeTi{sub 2}O{sub 6}, which may be related to the asymmetric 5f electron orbits of actinide elements. - Graphical abstract: Actinide-bearing compounds with brannerite structure and their analog CeTi{sub 2}O{sub 6} are not stable at high pressure. They were amorphized after {approx}20 GPa and a minor pressure-induced phase transition or decomposition process was always observed before amorphization. Highlights: > Phase stability of three brannerites CeTi{sub 2}O{sub 6}, ThTi{sub 2}O{sub 6}, and (U,Y)(Ti,Nb){sub 2}O{sub 6} at high pressures. > Brannerite structure was not stable and became amorphous after {approx}20 GPa. > Actinide-bearing brannerites are easier compressed than their analog compound CeTi{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural characterization and low-temperature physical properties of p-type single-crystal K{sub 8}Ga{sub 8.5}Sn{sub 37.5} grown by self-flux method

Single-crystal K{sub 8}Ga{sub 8.5}Sn{sub 37.5} was synthesized employing a self-flux method where Ga and Sn were used as fluxes. Single-crystal X-ray diffraction analyses revealed that this composition crystallizes in a cubic structure with the Pm3{sup ¯}n space group (number sign 223, a=11.9345(16) Å, V=1699.9(4) Å{sup 3}, Z=1, and R/wR=0.0187/0.0382). A large dynamic disorder and anisotropic atomic displacement parameters were observed for K atoms inside the larger polyhedra in the crystal structure of K{sub 8}Ga{sub 8.5}Sn{sub 37.5}. Electrical properties measurements indicate p-type conduction with onset of minority charge carrier conduction at temperatures above 270 K. - Graphical abstract: Single-crystal K{sub 8}Ga{sub 8.5}Sn{sub 37.5} was synthesized via a double-flux method where Ga and Sn were used as fluxes. Large disorder for K inside the larger polyhedra in the crystal structure of K{sub 8}Ga{sub 8.5}Sn{sub 37.5} was observed. Measurements of the electronic properties indicate p-type conduction with the onset of minority charge carrier conduction at temperatures above 270 K. Highlights: • Single-crystal K{sub 8}Ga{sub 8.5}Sn{sub 37.5} synthesized for the first time, and fully structurally characterized. • Large disorder for K inside the larger polyhedra in the crystal structure of K{sub 8}Ga{sub 8.5}Sn{sub 37.5.} • Electronic properties indicate p-type conduction with relatively low thermal conductivity.

36 MATERIALS SCIENCE↗

The beneficial influence of tellurium on the thermoelectric properties of Mo{sub 3−x}Fe{sub x}Sb{sub 7}

Various materials of the formulas Mo{sub 3−x}Fe{sub x}Sb{sub 7} and Mo{sub 2.6}Fe{sub 0.4}Sb{sub 7−y}Te{sub y} have been prepared by solid state synthesis at 873 K, starting from the elements in the stoichiometric ratios. The Fe content can be as high as x=0.45, while attempts to incorporate 0.5 Fe lead to the formation of FeSb{sub 2} as a minor side product. At x=0.4, the Te content can vary within 0≤y≤0.75, while the sample with y=1.0 shows FeSb{sub 2} as a minor phase. The materials were densified via hot-pressing, and their thermoelectric properties determined. Increasing both the Fe and the Te content leads to a decrease in the p-type carrier concentration, and thus an increase in Seebeck coefficient and a decrease in both electrical and thermal conductivity. In the end, the best thermoelectric properties were obtained in case of Mo{sub 2.6}Fe{sub 0.4}Sb{sub 6.25}Te{sub 0.75}, i.e. at the edge of the phase range, culminating in a figure-of-merit of zT=0.34 at 800 K. - Graphical abstract: Figure-of-merit of Mo{sub 3−x}Fe{sub x}Sb{sub 7−y}Te{sub y}. - Highlights: • Various Mo{sub 3−x}Fe{sub x}Sb{sub 7−y}Te{sub y} materials were synthesized and characterized. • In each case, the thermoelectric figure-of-merit increases rapidly with increasing temperature. • Higher Fe content and higher Te content cause a decrease of the p-type charge carriers. • With increasing Fe and Te, the Seebeck coefficient increases, while the electrical and thermal conductivity decreases. • Mo{sub 2.6}Fe{sub 0.4}Sb{sub 6.25}Te{sub 0.75} shows the best thermoelectric properties of this series.

36 MATERIALS SCIENCE↗

Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys

The microstructure of a cobalt-base alloy (Co-Cr-Mo) obtained by the investment casting process was studied. This alloy complies with the ASTM F75 standard and is widely used in the manufacturing of orthopedic implants because of its high strength, good corrosion resistance and excellent biocompatibility properties. This work focuses on the resulting microstructures arising from samples poured under industrial environment conditions, of three different Co-Cr-Mo alloys. For this purpose, we used: 1) an alloy built up from commercial purity constituents, 2) a remelted alloy and 3) a certified alloy for comparison. The characterization of the samples was achieved by using optical microscopy (OM) with a colorant etchant to identify the present phases and scanning electron microscopy (SE-SEM) and energy dispersion spectrometry (EDS) techniques for a better identification. In general the as-cast microstructure is a Co-fcc dendritic matrix with the presence of a secondary phase, such as the M{sub 23}C{sub 6} carbides precipitated at grain boundaries and interdendritic zones. These precipitates are the main strengthening mechanism in this type of alloys. Other minority phases were also reported and their presence could be linked to the cooling rate and the manufacturing process variables and environment. - Research Highlights: {yields}The solidification microstructure of an ASTM-F75 type alloy were studied. {yields}The alloys were poured under an industrial environment. {yields}Carbides and sigma phase identified by color metallography and scanning microscopy (SEM and EDS). {yields}Two carbide morphologies were detected 'blocky type' and 'pearlite type'. {yields}Minority phases were also detected.

36 MATERIALS SCIENCE↗

Effect of Zr on microstructures and mechanical properties of an Al-Mg-Si-Cu-Cr alloy prepared by low frequency electromagnetic casting

The Al-1.6Mg-1.2Si-1.1Cu-0.15Cr (all in wt. %) alloys with and without Zr addition prepared by low frequency electromagnetic casting process were investigated by using the optical microscope, scanning electron microscope and transmission electron microscope equipped with energy dispersive analytical X-ray. The effects of Al{sub 3}Zr phases on the microstructures and mechanical properties during solidification, homogenization, hot extrusion and solid solution were studied. The results show that Al{sub 3}Zr phases reduce the grain size by ∼ 29% and promote the formation of an equiaxed grain structure during solidification. Numerous spherical Al{sub 3}Zr dispersoids with 35–60 nm in diameters precipitate during homogenization, and these fine dispersoids change little during subsequent hot extrusion and solid solution. Adding 0.15 wt. % Zr results in no recrystallization after hot extrusion and partial recrystallization after solid solution, while the recrystallized grain size is 400–550 μm in extrusion direction in the Zr-free alloy. In addition, adding 0.15 wt. % Zr can obviously promote Q′ phase precipitation, while the β″ phases are predominant in the alloy without Zr. Adding 0.15 wt. % Zr, the ultimate tensile strength of the T6 treated alloy increases by 45 MPa, while the elongation remains about 16.7%. - Highlights: • Minor Zr can refine as-cast grains of the LFEC Al-Mg-Si-Cu-Cr alloy. • L1{sub 2} Al{sub 3}Zr phases with 35–60 nm in diameter precipitate during homogenization. • L1{sub 2} and DO{sub 22} Al{sub 3}Zr phases result in partial recrystallization after solid solution. • Minor Zr can promote the precipitation of Q′ phases. • Mechanical properties of Al-Mg-Si-Cu-Cr-Zr alloy are higher than those of AA7005.

36 MATERIALS SCIENCE↗

Residual glass and crystalline phases in a barium disilicate glass–ceramic

Investigations about the presence of residual glass are scarce, despite its fundamental role in the crystallization kinetics and luminescent properties of barium disilicate glass–ceramics (BaO·2SiO{sub 2}–BS{sub 2}) with a quasi-stoichiometric composition. Non-isothermal (DTA/DSC) experiments have demonstrated that BS{sub 2} presents a polymorphic transformation, where the h-BS{sub 2} (monoclinic structure) phase is completely transformed in l-BS{sub 2} (orthorhombic structure) at temperatures higher than 1020 °C (10 °C/min). In this study, BS{sub 2} monolithic samples were heat-treated at 1000 °C (BS2-10) and 1100 °C (BS2-11) in a DSC furnace at a heating rate of 10 °C/min. In addition, the crystalline and amorphous phases were characterized and quantified by Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) experiments, respectively. Although the complete polymorphic transformation from h-BS2 to l-BS2 was achieved at 1100 °C, our results demonstrated that BS2-11 contains a minor, albeit not negligible, amount of residual glass. - Highlights: • The crystalline and amorphous phases in a barium disilicate glass were characterized and quantified by XRD and TEM. • The BS2-10 sample was constituted by two main crystalline phases, which consists of 2 polymorphic forms: h-BS2 and l-BS2. • The orthorhombic BS2 phase (l-BS2) was predominant at 1100 °C. • The complete polymorphic transformation from h-BS2 to l-BS2 was achieved at 1100 °C. • Nevertheless, our XRD and TEM results demonstrated that BS2-11 contains a minor amount of residual glass.

36 MATERIALS SCIENCE↗

Precipitation in Mg-Gd-Y-Zr Alloy: Atomic-scale insights into structures and transformations

This paper reports on a comprehensive investigation, using atomic-scaled C{sub s} corrected high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), of the precipitation in Mg-9.28Gd-2.93Y-0.35Zr, including structures of the precipitates and several structural transformation processes. The precipitation sequence is identified as: Super saturated solid solution → clusters → nucleation β{sup '} (major)/ β{sub H} (minor)→ precipitate β{sup '} (major)/ β{sub M} , β{sub T}{sup '} (minor)→β{sub 1} → β(Equilibrium). Under peak-age condition, the strengthening structure is independent defect-free β{sup '} with little interaction among each other. Under over-age condition, the β{sup '} precipitates start to interact with each other, during which coarsening and orientation transformation of β{sup '} precipitates take place. The coarsening and orientation transformation, in which some RE atoms in the precipitates need to change their positions, are achieved by β{sub M} and β{sub T}{sup '} as transitional structures. - Highlights: • The precipitation in Mg-Gd-Y-Zr is comprehensively investigated by advanced atomic-scale Cs-corrected HAADF-STEM. • Various novel precipitate structures are unraveled. • Four types of interfaces between the precipitates are fully characterized. • The structural transformation processes of the precipitates are revealed.

36 MATERIALS SCIENCE↗

Effect of La{sub 2}O{sub 3}, CoO, Cr{sub 2}O{sub 3} and MoO{sub 3} nucleating agents on crystallization behavior and magnetic properties of ferromagnetic glass-ceramic in the system Fe{sub 2}O{sub 3}{center_dot}CaO{center_dot}ZnO{center_dot}SiO{sub 2}

Highlights: Black-Right-Pointing-Pointer Crystallization of magnetic glass ceramic with different nucleating agents. Black-Right-Pointing-Pointer The effect of La{sub 2}O{sub 3}, CoO, Cr{sub 2}O{sub 3} and MoO{sub 3} as nucleating agents was studied. Black-Right-Pointing-Pointer XRD for as prepared samples revealed crystallization of pure magnetite. Black-Right-Pointing-Pointer Heat treatment revealed minor calcium silicate, hematite and cristobalite. Black-Right-Pointing-Pointer TEM revealed crystallization of crystallite size in the range 50-100 nm. -- Abstract: Preparation and characterization of ferromagnetic glass ceramic in the system Fe{sub 2}O{sub 3}{center_dot}CaO{center_dot}ZnO{center_dot}SiO{sub 2} with different nucleating agents was studied. The effect of La{sub 2}O{sub 3}, CoO, Cr{sub 2}O{sub 3} and MoO{sub 3} as nucleating agents was investigated. Differential thermal analysis; X-ray diffraction and transmission electron microscope were used to investigate thermal behavior, sequence of crystallization and microstructure of the samples. XRD analysis for as prepared samples revealed the crystallization of single magnetite phase. Heat treatment at 900 Degree-Sign C/2 h revealed the appearance of minor amounts of calcium silicate, hematite and cristobalite beside magnetite. TEM revealed crystallization of crystallite size in the range 50-100 nm. Lattice parameters, cell volume and crystallite size were stimulated from XRD data. Magnetic properties of quenched samples were measured under 20 kG.

36 MATERIALS SCIENCE↗

Improvement of the photoluminescent intensity of ZnTa{sub 2}O{sub 6}:Pr{sup 3+} phosphor

Highlights: • The optimal luminescence intensity was obtained for 0.4 mol% Pr{sup 3+} doped ZnTa{sub 2}O{sub 6}. • The ZnTa{sub 2}O{sub 6}:Pr{sup 3+} has a colour index matching an ideal red emission. • The cross relaxation process led to a decrease in red emission at higher Pr{sup 3+} concentrations. • The blue emission continues to increase at higher Pr{sup 3+} concentrations. • The persistent luminescent increases with an increase in Pr{sup 3+} concentration. - Abstract: A red emitting ZnTa{sub 2}O{sub 6}:Pr{sup 3+} phosphor with Commission Internationale de l‘Eclairage coordinates that match those of an ideal red emission was prepared by solid state chemical reaction. X-ray diffraction confirmed that a pure orthorhombic phase of ZnTa{sub 2}O{sub 6} was crystallized. A homogeneous distribution of the Pr{sup 3+} ions was confirmed from the analysis of the time of flight secondary ion mass spectroscopy overlay images. In addition to the reflectance at 259 nm associated with band-to-band absorption, minor reflectance peaks associated with f-f transitions of Pr{sup 3+} were observed at 420–500 nm. The main red emission peak was split into minor peaks located at 608, 619 and 639 nm that were assigned to {sup 1}D{sub 2} ⟶ {sup 3}H{sub 4}, {sup 3}P{sub 0} ⟶ {sup 3}H{sub 6} and {sup 3}P{sub 0} ⟶ {sup 3}F{sub 2} transitions of Pr{sup 3+}, respectively. With increasing concentration of Pr{sup 3+}, a relatively weak blue emission was observed at 488 nm and this phenomenon maybe attributed to virtual charge transfer or/and inter cross relaxation effects. The decay characteristics of the persistent emission were also calculated.

36 MATERIALS SCIENCE↗

Simple coating synthesis and enhanced luminescence behaviour of LiLa(MoO4)2:Eu3+@NaF

Highlights: • LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06} @ (NaF){sub y wt} were synthesized with a simple coating method. • PL intensity can be enhanced as high as 4.80 times by coating NaF. • Enhancement PL intensity is a major effect, and increasing R is a minor effect. • LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06} @ (NaF){sub 0.025 wt} was a phosphor with high R values (R = 5.89). - Abstract: A series of LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}@ (NaF){sub y wt} were prepared with a simple coating method. XRD results confirm that NaF coating will cause the slight expand of the lattice volume for the sample. Strongly enhanced emission effect inducing by NaF coating is observed. The emission spectra (PL) intensity of the optimal sample, LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06} @ (NaF){sub 0.025wt} is as high as 4.8 times of that of LiLa(MoO{sub 4}){sub 2}:Eu{sup 3+}{sub 0.06}. Furthermore, dual emission properties inducing by NaF coating are observed. Enhancement emission of Eu{sup 3+} is a major effect, and increasing R is a minor effect. The optimal coating content of NaF is 2.5 wt%, which the corresponding chromaticity coordinates excited at 465 nm is x = 0.6650, y = 0.3347, which is nearly as same as the NTSC (National Television Standard Committee) standard values for red (x = 0.67, y = 0.33). So, it is a potential red-emitting phosphor with high R values (R = 5.89) for blue light-based white LED.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spine stereotactic body radiation therapy plans: Achieving dose coverage, conformity, and dose falloff

We report our experience of establishing planning objectives to achieve dose coverage, conformity, and dose falloff for spine stereotactic body radiation therapy (SBRT) plans. Patients with spine lesions were treated using SBRT in our institution since September 2009. Since September 2011, we established the following planning objectives for our SBRT spine plans in addition to the cord dose constraints: (1) dose coverage—prescription dose (PD) to cover at least 95% planning target volume (PTV) and 90% PD to cover at least 99% PTV; (2) conformity index (CI)—ratio of prescription isodose volume (PIV) to the PTV < 1.2; (3) dose falloff—ratio of 50% PIV to the PTV (R{sub 50%}); (4) and maximum dose in percentage of PD at 2 cm from PTV in any direction (D{sub 2cm}) to follow Radiation Therapy Oncology Group (RTOG) 0915. We have retrospectively reviewed 66 separate spine lesions treated between September 2009 and December 2012 (31 treated before September 2011 [group 1] and 35 treated after [group 2]). The χ{sup 2} test was used to examine the difference in parameters between groups. The PTV V{sub 100%} {sub PD} ≥ 95% objective was met in 29.0% of group 1 vs 91.4% of group 2 (p < 0.01) plans. The PTV V{sub 90%} {sub PD} ≥ 99% objective was met in 38.7% of group 1 vs 88.6% of group 2 (p < 0.01) plans. Overall, 4 plans in group 1 had CI > 1.2 vs none in group 2 (p = 0.04). For D{sub 2cm}, 48.3% plans yielded a minor violation of the objectives and 16.1% a major violation for group 1, whereas 17.1% exhibited a minor violation and 2.9% a major violation for group 2 (p < 0.01). Spine SBRT plans can be improved on dose coverage, conformity, and dose falloff employing a combination of RTOG spine and lung SBRT protocol planning objectives.

61 RADIATION PROTECTION AND DOSIMETRY↗

Evaluation of Neutron Reactions on Iron Isotopes for CIELO and ENDF/B-VIII.0

A new suite of evaluations for {sup 54,56,57,58}Fe has been developed in the framework of the CIELO international collaboration. New resolved resonance ranges were evaluated for {sup 54}Fe and {sup 57}Fe, while modifications were applied to resonances in {sup 56}Fe. The low energy part of the {sup 56}Fe file is almost totally based on measurements. At higher energies in {sup 56}Fe and in the whole fast neutron range for minor isotopes the evaluation consists of model predictions carefully adjusted to available experimental data. We also make use of the high quality and well experimentally-constrained dosimetry evaluations from the IRDFF library. Special attention was dedicated to the elastic angular distributions, which were found to affect results of the integral benchmarking. The new set of iron evaluations was developed in concert with other CIELO evaluations and they were tested together in the integral experiments before being adopted for the ENDF/B-VIII.0 library.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗