Search NASA⌕ Search

SEARCH · Search NASA

Results for “Matrix diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Holistic comparison of environmental barrier coating material candidates through design of a figure of merit

The first figure of merit for environmental barrier coating (EBC) materials was designed through a ranking system for material properties pertaining to established EBC failure modes in service. Seven past, present, and novel EBC candidate materials were used in the figure of merit design: SiO 2 , Ba 0.75 Sr 0.25 Al 2 Si 2 O 8 (BSAS), HfSiO 4 , Yb 2 Si 2 O 7 , Yb 2 SiO 5 , Yb 2 O 3 , and YbPO 4 . Utilizing compiled data from the literature, the presented figure of merit verified Yb 2 Si 2 O 7 as the state-of-the-art candidate with optimal EBC properties and inferred that YbPO 4 should be considered as a potentially viable EBC material candidate. Further, the figure of merit allows for a holistic comparison of EBC candidates and informs experimental and computational search efforts for next-generation complex EBCs. Clear knowledge gaps found through this work include CaO–MgO–Al 2 O 3 –SiO 2 (CMAS)-resistant coatings, EBC lifetimes before delamination, and oxidant diffusion rates in relevant EBC microstructures. It was shown that while some materials show promise for solving a single key failure mode for EBCs (i.e., CMAS reactivity), a community-wide goal should be placed on materials development to achieve acceptable resistance against all major failure modes, which are interconnected. Novel compositionally complex EBC materials, in addition to layered EBC architectures, show promise for the optimization of material properties for long-lifetime EBCs in combustion environments.

36 MATERIALS SCIENCE↗

Reassessment of uncertainties for the PU-MET-INTER-002 benchmark - 14432

Uncertainty for the PU-MET-INTER-002 benchmark of ZPR-6/10 was unusually large for a ZPR assembly and was dominated by the uncertainties in matrix tube pitch and composition uncertainties for plutonium, graphite and stainless steel plates. The original uncertainty analysis for PU-MET-INTER-002 was limited by computer resources, software and the nuclear data available in 2002, all of which have been improved since. An as-built Monte Carlo model of ZPR-6/10 was used to quantify components of the transformation from the detailed model to a simplified RZ benchmark in 2002. Compositional uncertainties were estimated based upon TWODANT calculations of the RZ benchmark model (20 group, S{sub 8} - P{sub 1}). MC{sup 2}-2 was used with END/B-V.2 data to generate homogenized cross section data for TWODANT. The MC{sup 2}-2 calculations did not account for lattice cell spatial heterogeneity which was driven by the manual process required to generate ∼80 modifications to the deterministic model and by the software limitations of MC{sup 2}-2. Improvements to DIF3D-VARIANT, development of the MC{sup 2}-3 and BuildZPRModel codes, and better computer resources make accurate 3D transport calculations of reactivity changes practical today. BuildZPRModel imports the as-built geometry and creates a 'drawer' homogenized DIF3D model where each radial DIF3D mesh is the exact size of a single ZPR matrix tube and drawer. A MC{sup 2}-3 input is constructed for each drawer to produce homogenized cross section data where the spatial cell heterogeneity is captured by solving a 1D MOC transport calculation on the ultrafine energy group level. Collapsing 3D drawers into 1D MC{sup 2}-3 drawer models follows conventional procedures and is done by BuildZPRModel. MCNP6 was used to re-compute relevant geometry components of the uncertainty using ENDF/B-VII.0 data with the as-built model. Changes in the geometry components compared with earlier results are insignificant. DIF3D calculations of the compositional uncertainties were performed using 33, 70, 116, 230, 425, and 703 group energy structures and selectively combined with P{sub 3}-P{sub 7} transport approximations and P{sub 1} and P{sub 3} scattering kernels. 3D diffusion theory calculations were also performed for comparison. Many composition uncertainty components were essentially unchanged with the updated methodology. However, the dominant experimental uncertainty for PU-MET-INTER-002 is the composition of stainless steel. The new calculations reduce the stainless steel uncertainty from ∼115 pcm to ∼70 pcm which significantly reduces the total uncertainty for PU-MET-INTER-002. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The Schwinger-Keldysh coset construction

The coset construction is a tool for systematically building low energy effective actions for Nambu-Goldstone modes. This technique is typically used to compute time-ordered correlators appropriate for S-matrix computations for systems in their ground state. In this paper, we extend this technique to the Schwinger-Keldysh formalism, which enables one to calculate a wider variety of correlators and applies also to systems in a mixed state. We focus our attention on internal symmetries and demonstrate that, after identifying the appropriate symmetry breaking pattern, Schwinger-Keldysh effective actions for Nambu-Goldstone modes can be constructed using the standard rules of the coset construction. Particular emphasis is placed on the thermal state and ensuring that correlators satisfy the KMS relation. We also discuss explicitly the power counting scheme underlying our effective actions. We comment on the similarities and differences between our approach and others that have previously appeared in the literature. In particular, our prescription does not require the introduction of additional “diffusive” symmetries and retains the full non-linear structure generated by the coset construction. We conclude with a series of explicit examples, including a computation of the finite-temperature two-point functions of conserved spin currents in non-relativistic paramagnets, antiferromagnets, and ferromagnets. Along the way, we also clarify the discrete symmetries that set antiferromagnets apart from ferromagnets, and point out that the dynamical KMS symmetry must be implemented in different ways in these two systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microstructure and mechanical properties of NiCoCrAlYTa alloy processed by press and sintering route

Nickel-based superalloys such as NiCoCrAlY are widely used in high-temperature applications, such as gas turbine components in the energy and aerospace industries, due to their strength, high elastic modulus, and high-temperature oxidation resistance. However, the processing of these alloys is complex and costly, and the alloys are currently used as a bond coat in thermal barrier coatings. In this work, the effect of cold press and sintering processing parameters on the microstructure and mechanical properties of NiCoCrAlY alloy were studied using the powder metallurgy route as a new way to obtain NiCoCrAlYTa samples from a gas atomized prealloyed powder feedstock. High mechanical strength and adequate densification up to 98% were achieved. The most suitable compaction pressure and sintering temperature were determined for NiCoCrAlYTa alloy through microstructure characterization. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive spectroscopy microanalysis (EDS) were performed to confirm the expected γ-Ni matrix and β-NiAl phase distribution. Additionally, the results demonstrated the unexpected presence of carbides and Ni–Y-rich zones in the microstructure due to the powder metallurgy processing parameters used. Thus, microhardness, nanoindentation and uniaxial compression tests were conducted to correlate the microstructure of the alloy samples with their mechanical properties under the different studied conditions. The results show that the compaction pressure did not significantly affect the mechanical properties of the alloy samples. In this work, the compaction pressures of 400, 700 and 1000 MPa were used. The sintering temperature of 1200 °C for NiCoCrAlYTa alloy was preferred; above this temperature, the improvement in mechanical properties is not significant due to grain coarsening, whereas a lower temperature produces a decrease in mechanical properties due to high porosity and poor solid-state diffusion. - Graphical abstract: Display Omitted - Highlights: • We made NiCoCrAlYTa alloy by a conventional powder metallurgy route. • High densification and adequate strength were observed. • The presence of unexpected carbides found along γ/γ and γ/β grain boundaries was detected. • The effect of cold press and sintering processing parameters on the microstructure and mechanical properties were studied.

36 MATERIALS SCIENCE↗

Evidence for the existence and ecological relevance of fast-cycling mineral-associated organic matter

Longstanding theories and models classify mineral-associated organic matter as the large ( ~ 60%) but slow-cycling and persistent portion of soil organic matter. Strong physico-chemical interactions and diffusion limitations restrict the turnover of mineral-associated organic matter, allowing carbon and nitrogen bound therein to persist in soil for as long as centuries to millennia. However, mineral-associated organic matter is a chemically and functionally diverse pool with a substantial portion cycling at relatively fast (i.e., minutes to years) timescales. Despite a growing body of evidence for the heterogenous and multi-pool nature of mineral-associated organic matter, we lack consensus on how to conceptualize and directly quantify fast-cycling mineral-associated organic matter and its ecological significance. We demonstrate that the dynamic qualities of fast-cycling mineral-associated organic matter vary based on 1) the chemistry of the mineral particles and organic matter, 2) the complex set of interactions between organic matter and the mineral matrix, and 3) the presence and strength of destabilizing forces that lead to decomposition or loss of mineral-associated organic matter (i.e., plant-microbe interactions, agricultural intensification, and climate change). Finally, we discuss potential implications and research opportunities for how we measure, manage, and model the dynamic subfraction of this otherwise persistent pool of soil organic matter.

Biological and medical sciences↗

A phase-field model for hydride formation in polycrystalline metals: Application to δ-hydride in zirconium alloys

We report a phase-field model for simulating metal hydride formation involving large volume expansion in single- and polycrystals. As an example, we consider δ-hydride formation in α-zirconium (Zr), which involves both displacive crystallographic structural change and hydrogen diffusion process. Thermodynamic Gibbs energy functions are extracted from the available thermodynamic database based on the sublattice model for the interstitial solid solutions. Solute-grain boundary interactions and inhomogeneous elasticity of polycrystals are taken into consideration within the context of diffuse-interface description. The stress-free transformation strains of multiple variants for hcp -Zr (α) to fcc -hydride (δ) transformation are derived based on the well-established orientation relationship between the α and δ phases as well as the corresponding temperature-dependent lattice parameters. In particular, to account for the large volume expansion, we introduced the mixed interfacial coherency concept between those phases—basal planes are coherent and prismatic planes are semi-coherent in computing the strain energy contribution to the thermodynamics. We analyzed the morphological characteristics of hydrides involving multiple structural variants and their interactions with grain boundaries. Moreover, our simulation study allows for the exploration of the possible hydride re-orientation mechanisms when precipitating under applied tensile load, taking into account the variation in the interfacial coherency between hydrides and matrix, their elastic interactions with the applied stress, as well as their morphology-dependent interactions with grain boundaries. Here, the phase-field model presented here is generally applicable to hydride formation in any binary metal–hydrogen systems.

36 MATERIALS SCIENCE↗

On the Degradation of the Effectiveness of Nonlinear Diffusion Acceleration with Parallel Block Jacobi Splitting

MOOSE's radiation transport module Rattlesnake comprises a first order S N solver that can be accelerated with a flexible Nonlinear Diffusion Acceleration. At each NDA iteration, the streaming and collision operator of the S{sub N} equations are (approximately) inverted using a transport sweep. When executed on multiple processors parallel block Jacobi (PBJ) splitting is utilized lagging the processor sub-domain's incoming angular fluxes making the implemented method asynchronous, i.e. the convergence properties of NDA become dependent on the number of concurrent tasks and details of the partitioning. Within this work, we study the NDA convergence properties for the two-dimensional C5G7 benchmark problem PBJ with p = 1, 2, 4, 8, 12, 16, 24, 32, 48, 60, 72, 96 and 144 concurrent tasks. Rosa studied the convergence properties of PBJ splitting methods with and without transport synthetic acceleration (TSA) in slab geometry and two-dimensional Cartesian geometry, respectively. Rosa's iteration scheme lags both the incoming angular fluxes and the scattering source making it very similar to the method described here. Rosa found by means of Fourier analysis that convergence of unaccelerated PBJ can degrade for optically thin subdomains, i.e. for a large number of processors given a fixed domain size. Depending on the choice of parameters application of TSA can lead to an effective algorithm. In contrast to Rosa's work, this work focuses on PBJ splitting for NDA accelerated solution of the multigroup eigenvalue problem. Later, Zerr and Anistratov used their integral transport matrix method in conjunction with PBJ. This iteration scheme is different as it does not lag the scattering source. Nevertheless, Fourier analysis with Diamond Difference spatial discretization showed that the method degrades with increasing the overall size of the spatial domain while keeping the sub-domain size constant. In the case of an infinite medium, the observed spectral radius becomes unity. These references establish the iterative performance of PBJ for one-group fixed source problems discretized on rectangular cells, but for the Rattlesnake first order NDA method, an emphasis lies on multigroup eigenvalue problems. In this setting, the additional complication arises that the low order equations are not exactly inverted, but only to some iterative criterion. Further, as the low order problem is solved using Jacobian-Free Newton Krylov methods, a suitable preconditioner for the GMRES iterations is required. As the effectiveness of the preconditioners may decrease when more concurrent processes are used, we expect the low order solve to impact the overall effectiveness of the NDA method in parallel execution as well. Therefore, this work focuses on the question of how detrimental the asynchronicity of the high and low order iterative solutions is for the effectiveness of NDA solutions of realistic, unstructured grid, multigroup eigenvalue problems. The iterative convergence properties of Rattlesnake's NDA method for multigroup eigenvalue problems are studied for varying number of concurrent processes. Rattlesnake's NDA method is asynchronous because the high order transport sweep uses PBJ splitting and because the low order solve's preconditioners, algebraic multigrid and additive Schwarz, are asynchronous. We found that up to 144 processes the number of Picard iterations increases by a factor of 2-3 affecting but not destroying NDA's parallel performance for the C5G7 benchmark problem, a representative LWR (light water reactor) configuration. The solution of the NDA low order eigenvalue problem posed greater problems than expected for the solvers currently available in Rattlesnake mainly because of problems to effectively precondition the modified low-order problem. As a matter of fact, the low order problem becomes an advection-diffusion problem. Non-robustness was observed for the AMG preconditioned coarse mesh acceleration for more than 60 concurrent processes, which was fixed by increasing the number of permissible V-cycles per AMG call. For fine mesh acceleration AMG proved to be ineffective and we resorted to ASM. For both AMG and ASM, increasing number of linear iterations per nonlinear are observed when increasing the number of processes, but for ASM this problem appears to be worse. The results from this work also indicate that initial development efforts should be diverted from implementation of a high-order parallel sweeping algorithm to the effective and robust iterative solution of the low order NDA multigroup eigenvalue problem. (authors)

97 MATHEMATICS AND COMPUTING↗

A Novel NASICON‐Type Na 4 MnCr(PO 4 ) 3 Demonstrating the Energy Density Record of Phosphate Cathodes for Sodium‐Ion Batteries

Abstract Sodium‐ion batteries (SIBs) have attracted incremental attention as a promising candidate for grid‐scale energy‐storage applications. To meet practical requirements, searching for new cathode materials with high energy density is of great importance. Herein, a novel Na superionic conductor (NASICON)‐type Na 4 MnCr(PO 4 ) 3 is developed as a high‐energy cathode for SIBs. The Na 4 MnCr(PO 4 ) 3 nanoparticles homogeneously embedded in a carbon matrix can present an extraordinary reversible capacity of 160.5 mA h g −1 with three‐electron reaction at ≈3.53 V during the Na + extraction/insertion process, realizing an unprecedentedly high energy density of 566.5 Wh kg −1 in the phosphate cathodes for SIBs. It is intriguing to reveal the underlying mechanism of the unique Mn 2+ /Mn 3+ , Mn 3+ /Mn 4+ , and Cr 3+ /Cr 4+ redox couples via X‐ray absorption near‐edge structure spectroscopy. The whole electrochemical reaction undergoes highly reversible single‐phase and biphasic transitions with a moderate volume change of 7.7% through in situ X‐ray diffraction and ex situ high‐energy synchrotron X‐ray diffraction. Combining density functional theory (DFT) calculations with the galvanostatic intermittent titration technique, the superior performance is ascribed to the low ionic‐migration energy barrier and desirable Na‐ion diffusion kinetics. The present work can offer a new insight into the design of multielectron‐reaction cathode materials for SIBs.

Zhang, Jian↗

Feature-space assessment of electrical impedance tomography coregistered with computed tomography in detecting multiple contrast targets

Purpose: Fusion of electrical impedance tomography (EIT) with computed tomography (CT) can be useful as a clinical tool for providing additional physiological information about tissues, but requires suitable fusion algorithms and validation procedures. This work explores the feasibility of fusing EIT and CT images using an algorithm for coregistration. The imaging performance is validated through feature space assessment on phantom contrast targets. Methods: EIT data were acquired by scanning a phantom using a circuit, configured for injecting current through 16 electrodes, placed around the phantom. A conductivity image of the phantom was obtained from the data using electrical impedance and diffuse optical tomography reconstruction software (EIDORS). A CT image of the phantom was also acquired. The EIT and CT images were fused using a region of interest (ROI) coregistration fusion algorithm. Phantom imaging experiments were carried out on objects of different contrasts, sizes, and positions. The conductive medium of the phantoms was made of a tissue-mimicking bolus material that is routinely used in clinical radiation therapy settings. To validate the imaging performance in detecting different contrasts, the ROI of the phantom was filled with distilled water and normal saline. Spatially separated cylindrical objects of different sizes were used for validating the imaging performance in multiple target detection. Analyses of the CT, EIT and the EIT/CT phantom images were carried out based on the variations of contrast, correlation, energy, and homogeneity, using a gray level co-occurrence matrix (GLCM). A reference image of the phantom was simulated using EIDORS, and the performances of the CT and EIT imaging systems were evaluated and compared against the performance of the EIT/CT system using various feature metrics, detectability, and structural similarity index measures. Results: In detecting distilled and normal saline water in bolus medium, EIT as a stand-alone imaging system showed contrast discrimination of 47%, while the CT imaging system showed a discrimination of only 1.5%. The structural similarity index measure showed a drop of 24% with EIT imaging compared to CT imaging. The average detectability measure for CT imaging was found to be 2.375 ± 0.19 before fusion. After complementing with EIT information, the detectability measure increased to 11.06 ± 2.04. Based on the feature metrics, the functional imaging quality of CT and EIT were found to be 2.29% and 86%, respectively, before fusion. Structural imaging quality was found to be 66% for CT and 16% for EIT. After fusion, functional imaging quality improved in CT imaging from 2.29% to 42% and the structural imaging quality of EIT imaging changed from 16% to 66%. The improvement in image quality was also observed in detecting objects of different sizes. Conclusions: The authors found a significant improvement in the contrast detectability performance of CT imaging when complemented with functional imaging information from EIT. Along with the feature assessment metrics, the concept of complementing CT with EIT imaging can lead to an EIT/CT imaging modality which might fully utilize the functional imaging abilities of EIT imaging, thereby enhancing the quality of care in the areas of cancer diagnosis and radiotherapy treatment planning.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Two-Level Convergence Theory for Multigrid Reduction in Time (MGRIT)

Here we develop a two-grid convergence theory for the parallel-in-time scheme known as multigrid reduction in time (MGRIT), as it is implemented in the open-source package [XBraid: Parallel Multigrid in Time, http://llnl.gov/casc/xbraid]. MGRIT is a scalable and multilevel approach to parallel-in-time simulations that nonintrusively uses existing time-stepping schemes, and in a specific two-level setting it is equivalent to the widely known parareal algorithm. The goal of this paper is twofold. First, we present a two-level MGRIT convergence analysis for linear problems where the spatial discretization matrix can be diagonalized, and then apply this analysis to our two basic model problems, the heat equation and the advection equation. One important assumption is that the coarse and fine time-grid propagators can be diagaonalized by the same set of eigenvectors, which is often the case when the same spatial discretization operator is used on the coarse and fine time grids. In many cases, the MGRIT algorithm is guaranteed to converge, and we demonstrate numerically that the theoretically predicted convergence rates are sharp in practice for our model problems. Second, we explore how the convergence of MGRIT compares to the stability of the chosen time-stepping scheme. In particular, we demonstrate that a stable time-stepping scheme does not necessarily imply convergence of MGRIT, although MGRIT with FCF-relaxation always converges for the diffusion dominated problems considered here.

97 MATHEMATICS AND COMPUTING↗

Regenerative Carbonate-Based Thermochemical Energy Storage System for Concentrating Solar Power

Southern Research has developed a thermochemical energy storage (TCES) technology that utilizes the endothermic-exothermic reversible carbonation of calcium oxide (lime) to store thermal energy at high-temperatures, such as those achieved by next generation concentrating solar power (CSP) facilities. The major challenges addressed in the development of this system include refining a high capacity, yet durable sorbent material and designing a low thermal resistance low-cost heat exchanger reactor system to move heat between the sorbent and a heat transfer fluid under conditions relevant for CSP operation (e.g., energy density, reaction kinetics, heat flow). The proprietary stabilized sorbent was developed by Precision Combustion, Inc. (PCI). A factorial matrix of sorbent compositions covering the design space was tested using accelerated high throughput screening in a thermo-gravimetric analyzer. Several promising formulations were selected for more thorough evaluation and one formulation with high capacity (0.38 g CO 2 /g sorbent) and durability (>99.7% capacity retention over 100 cycles) was chosen as a basis for further development of the energy storage reactor system. In parallel with this effort, a full range of currently available commercial and developmental heat exchange reactor systems and sorbent loading methods were examined through literature research and contacts with commercial vendors. Process models were developed to examine if a heat exchange reactor system and balance of plant can meet required TCES performance and cost targets, optimizing tradeoffs between thermal performance, exergetic efficiency, and cost. Reactor types evaluated included many forms, from microchannel reactor, to diffusion bonded heat exchanger, to shell and tube heat exchangers. The most viable design for application to a supercritical CO 2 power cycle operating at 200-300 bar pressure and >700°C was determined to be a combination of a diffusion bonded heat exchanger with a shell and tube reactor. A bench scale reactor system was then designed and constructed to test sorbent performance under more commercially relevant conditions. This system utilizes a tube-in tube reactor design containing approximately 250 grams sorbent and is able to operate under a wide range of temperature, pressure and flow conditions as needed to explore system performance under a variety of operating conditions. A variety of sorbent loading methods may be tested using the reactor design. Initial bench test results over 25 cycles showed very high sorbent stability (>99%) and sufficient capacity (>0.28 g CO 2 /g sorbent) for an economical commercial-scale system. Initial technoeconomic evaluation of the proposed storage system show that the sorbent cost should not have a significant impact on overall system cost, and that the largest cost impacts come from the heat exchanger reactor and balance of plant equipment, including compressors and gas storage, due to the high temperatures for sCO 2 cycles. Current estimated system costs are $47/kWhth based on current material and equipment cost estimates.

14 SOLAR ENERGY↗

Bimetallic oxamato complexes synthesized into mesoporous matrix as precursor to tunable nanosized oxide

Highlights: • The bimetallic oxamato complexes as single-source precursor. • We prepared into a porous silica glass tunable nanosized oxide powders. • X-ray diffraction shows the formation of CeO{sub 2}/CuO and spinel cobaltite. • The different number of IDC allows control of the nanoparticle size. - Abstract: The bimetallic complexes were employed to prepare into a porous silica glass tunable nanosized oxide powders through the single source precursor (SSP) method. These materials were prepared by first anchoring of [Cu(opba)]{sup 2−} [opba = ortho-phenylenebis(oxamato)], second by reaction in situ with second metal [Co(II) or Ce(III)] and followed by a thermal treatment. The different number of impregnation–decomposition cycles (IDC) allows control of the nanoparticle size. X-ray diffraction shows the formation of mixture CeO{sub 2}–CuO and spinel copper cobaltite. Raman spectroscopy confirmed the formation of such phases. Transmission electron microscopy images revealed that spinel cobaltite particles (8 IDC) present a mean size of about 9 nm, whereas for the CeO{sub 2}–CuO phase the particle diameters are 4 nm (2 IDC) and 8 nm (6 IDC). For CeO{sub 2}–CuO the diffuse reflectance spectroscopy indicates a consistent red shift in band gap from 3.41 to 2.87 eV with increasing of particle size due to quantum confinement effect.

36 MATERIALS SCIENCE↗

Microstructural and infiltration properties of woven preforms during chemical vapor infiltration

Interface-resolved direct numerical simulations (DNSs) of chemical vapor infiltration (CVI) have been performed over a range of furnace-operating conditions (Thiele moduli) and for practical woven preform geometries. A level-set method is used to resolve the geometry of the initial preform at tow scale. The interface between the vapor and solid phase is then evolved in time through the entire CVI densification cycle, fully resolving the time-varying topology between the two phases. In contrast to previous level-set methods for CVI simulation, the physical reaction and diffusion processes govern the level-set movement in the current approach. The surface deposition kinetics is described by the usual one-step model. In this paper, the DNS data are used to study the evolving porosity, surface-to-volume ratio, and flow infiltration properties (permeability and effective diffusivities). Additionally, comparisons are made to popularly-assumed structure functions and the standard, Kozeny–Carmen porous media model commonly employed in modeled CFD simulations of CVI. The virtual DNS experiments reveal a Thiele modulus and preform geometry (fabric layup) dependence which the existing microstructural and infiltration models are not able to describe throughout the entire densification process. The DNS-based, woven geometry-specific correlations can be applied directly to mean-field, furnace-scale CFD simulations.

36 MATERIALS SCIENCE↗

Assessment the leaching characteristics and long-term leaching behavior of some radionuclides from synthesized zeolite cement matrix

Highlights: • Synthesis and characterization of zeolite cement synthesized from fly ash • Leaching tests were used to assess the release rate of {sup 85}Sr and {sup 60}Co radionuclides. • Simple mathematical models were used to detect leaching mechanisms. • Long-term leaching behavior of {sup 85}Sr and {sup 60}Co from cementitious matrix was assessed. The development of cementitious materials remains a vital goal to produce valuable products with good mechanical, physical and chemical properties suitable for the safe disposal of concentrated radionuclides resulted from the treatment of contaminated solutions. In this paper, zeolite cement with good properties was laboratory synthesized from industrial by-products fly ash and characterized using various characterization techniques. The leaching characteristics of strontium and cobalt radionuclides from the synthesized zeolite cement were scrutinized conforming with the standard leaching methodology of International Atomic Energy Authority (IAEA). A mechanical strength assessment was executed to characterize the extent of immobilization process of the solidified matrices. The cumulative leaching fraction (φ) of the two studied radionuclides was found to be less than 5% in all examined conditions, which implies the applicability of the IAEA-recommended methodology for estimating the diffusion coefficient. The experimental leaching data were regressed nonlinearly to various mathematical kinetic models to assess the controlling leaching mechanism and to determine the leaching parameters. The regression results indicated that strontium ({sup 85}Sr) and cobalt ({sup 60}Co) leaching resulted from two succeeding mechanisms: as first order kinetic reaction, and then diffusion. The calculated values of leachability indices signify that the performance of each of the studied matrices is within an acceptable range. A simplified mathematical model, rooted in the first order reaction and diffusion mechanisms, was simulated to predict the radionuclides leaching rates from zeolite cement matrices. By comparing the synthesized zeolite cement with other cementitious materials, it can be concluded that the synthesized material can be classified as an efficient material suitable to immobilize {sup 85}Sr and {sup 60}Co from radioactive wastes. The acquired findings demonstrated that the studied immobilized waste matrices have acceptable mechanical effectiveness.

36 MATERIALS SCIENCE↗

Entropy-driven structure and dynamics in carbon nanocrystallites

New carbon composite materials are being developed that contain carbon nanocrystallites in the range of 5 17 A in radius dispersed within an amorphous carbon matrix. Evaluating the applicability of these materials for use in battery electrodes requires a molecular-level understanding of the thermodynamic, structural, and dynamic properties of the nanocrystallites. Herein, molecular dynamics simulations reveal the molecular-level mechanisms for such experimental observations as the increased spacing between carbon planes in nanocrystallites as a function of decreasing crystallite size. As the width of this spacing impacts Li-ion capacity, an explanation of the origin of this distance is relevant to understanding anode performance. It is thus shown that the structural configuration of these crystallites is a function of entropy. The magnitude of out-of-plane ripples, binding energy between layers, and frequency of characteristic planar modes are reported over a range of nanocrystallite sizes and temperatures. This fundamental information for layered carbon nanocrystallites may be used to explain enhanced lithium ion diffusion within the carbon composites.

Nanocrystallite Carbon↗

Monte Carlo based investigation of Berry phase for depth resolved characterization of biomedical scattering samples

The propagation of light in turbid media is an active area of research with relevance to numerous investigational fields, e.g., biomedical diagnostics and therapeutics. The statistical random-walk nature of photon propagation through turbid media is ideal for computational based modeling and simulation. Ready access to super computing resources provide a means for attaining brute force solutions to stochastic light-matter interactions entailing scattering by facilitating timely propagation of sufficient (>10million) photons while tracking characteristic parameters based on the incorporated physics of the problem. One such model that works well for isotropic but fails for anisotropic scatter, which is the case for many biomedical sample scattering problems, is the diffusion approximation. In this report, we address this by utilizing Berry phase (BP) evolution as a means for capturing anisotropic scattering characteristics of samples in the preceding depth where the diffusion approximation fails. We extend the polarization sensitive Monte Carlo method of Ramella-Roman, et al.,1 to include the computationally intensive tracking of photon trajectory in addition to polarization state at every scattering event. To speed-up the computations, which entail the appropriate rotations of reference frames, the code was parallelized using OpenMP. The results presented reveal that BP is strongly correlated to the photon penetration depth, thus potentiating the possibility of polarimetric depth resolved characterization of highly scattering samples, e.g., biological tissues.

back scattered Mueller matrix↗

Influence of Thermal Annealing on Free Carrier Concentration in (GaN) 1– x (ZnO) x Semiconductors

It has been previously demonstrated that the efficiency of (GaN) 1–x (ZnO) x semiconductors for solar water splitting can be improved by thermal annealing, though the origin of this improvement was not resolved. In the present work, it is shown that annealing reduces the free carrier (electron) concentration of (GaN) 1–x (ZnO) x . The time-, temperature-, and atmosphere-dependent changes were followed through two simple techniques: indirect diffuse reflectance measurements from 0.5 to 3.0 eV which show very high sensitivity to the free carrier response at the lowest energies and EPR measurements which directly probe the number of unpaired electrons. For the thermal annealing of investigated compositions, it is found that temperatures of 250 °C and below do not measurably change the free carrier concentration, a gradual reduction of the free carrier concentration occurs over a time period of many hours at 350 °C, and the complete elimination of free carriers happens within an hour at 550 °C. These changes are driven by an oxidative process which is effectively suppressed under actively reducing atmospheres (H 2 , NH 3 ) but which can still occur under nominally inert gases (N 2 , Ar). Surprisingly, it is found that the N 2 gas released during thermal oxidation of (GaN) 1–x (ZnO) x samples remains trapped within the solid matrix and is not expelled until temperatures of about 900 °C, a result directly confirmed through neutron pair-distribution fuction (PDF) measurements which show a new peak at the 1.1 Å bond length of molecular nitrogen after annealing. Preliminary comparative photoelectrochemical (PEC) measurements of the influence of free carrier concentration on photoactivity for water oxidation were carried out for a sample with x = 0.64. Samples annealed to eliminate free carriers exhibited no photoactivity for water oxidation, while a complex dependence on carrier concentration was observed for samples with intermediate free carrier concentrations. The methods demonstrated here provide an important approach for quantifying (and controlling) the carrier concentrations of semiconductors which are only available in the form of loose powders, as is commonly the case for oxynitride compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering defect energy landscape of CoCrFeNi high-entropy alloys by the introduction of additional dopants

The concept of high-entropy alloys (HEAs) focusing on tuning the overall chemical complexity represents a novel alloy design strategy. In contrast, alloying of a metallic matrix with minor doping elements with limited and localized tunability has been a common practice to improve material performance. Combining the idea of globally engineering defect energy landscape in HEAs and the localized doping strategy in dilute alloys, in this work, we explore doping effects of minor elements in a HEA matrix to further enhance the overall and localized chemical tunability, aiming to improve its irradiation resistance. Specifically, we study the influence of minor Al, Cu, Ti, and Pd substitutional doping elements on defect energetics in a CoCrFeNi model HEA based on density-functional theory (DFT) calculations. The DFT results indicate that the formation and migration energies of vacancies can be strongly influenced when a dopant is introduced at the first nearest neighbor shells around a vacancy. On the other hand, interstitial energetics are only slightly affected. Among the four elements, Ti and Pd generally decrease vacancy formation energies and increase vacancy migration energies more significantly than Al and Cu. The doping effects become more pronounced when the concentration of the substitutional dopants increases. Based on the energy distributions obtained from DFT, we build a kinetic Monte Carlo (kMC) model to assess the impact of dopants on vacancy-mediated diffusivity in the doped HEAs. Our results suggest that Ti and Pd can lower the tracer diffusivity in the considered HEAs and act as trapping sites, whereas Cu may enhance the atomic transport. This work indicates that substitutional doping in HEAs is an effective strategy in metallurgy to further tune the defect and transport properties of complex alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗