Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modeling Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

On multidomain multiscale modeling and simulation of a novel partial pressure and temperature swing adsorptive reactor ($\mathrm{PPTSAR}$) with application to the water gas shift reaction

Here in this work, a dynamic, multidomain, multiscale model of a novel Partial Pressure and Temperature Swing Adsorptive Reactor (PPTSAR) Process is developed and simulated for a Water Gas Shift Reaction (WGSR) application. The proposed model couples the reactor wall, catalyst/adsorbent pellet, and fluid mixture domains at their respective scales to comprehensively model mass, momentum, and energy transport phenomena occurring within each domain. The resulting model elucidates the PPTSAR’s start-up, transient, and long-term, periodic, dynamic behavior, during both adsorption/reaction and desorption operating modes. In the WGSR application considered, the use of two PPTSARs is shown to allow continuous operation that delivers CO conversion greater than 95% with simultaneous complete CO 2 capture.

42 ENGINEERING↗

Fully three-dimensional simulation and modeling of a dense plasma focus

A dense plasma focus (DPF) is a pulsed-power machine that electromagnetically accelerates and cylindrically compresses a shocked plasma in a Z-pinch. The pinch results in a brief (~ 100 ns) pulse of X-rays, and, for some working gases, also a pulse of neutrons. A great deal of experimental research has been done into the physics of DPF reactions, and there exist mathematical models describing its behavior during the different time phases of the reaction. Two of the phases, known as the inverse pinch and the rundown, are approximately governed by magnetohydrodynamics, and there are a number of well-established codes for simulating these phases in two dimensions or in three dimensions under the assumption of axial symmetry. There has been little success, however, in developing fully three-dimensional simulations. In this work we present three-dimensional simulations of DPF reactions and demonstrate that three-dimensional simulations predict qualitatively and quantitatively different behavior than their two-dimensional counterparts. One of the most important quantities to predict is the time duration between the formation of the gas shock and Z-pinch, and the three-dimensional simulations more faithfully represent experimental results for this time duration and are essential for accurate prediction of future experiments.

Dense plasma focus, magnetohydrodynamics, simulati↗

A top-down assessment using OMI NO 2 suggests an underestimate in the NO x emissions inventory in Seoul, South Korea, during KORUS-AQ

Abstract. In this work, we investigate the NO x emissions inventory inSeoul, South Korea, using a regional ozone monitoring instrument (OMI) NO 2 product derived from the standard NASA product. We first develop a regional OMI NO 2 product by recalculating the air mass factors using a high-resolution (4 km × 4 km) WRF-Chem model simulation, which better captures the NO 2 profile shapes in urban regions. We then apply a model-derived spatial averaging kernel to further downscale the retrieval and account for the subpixel variability. These two modifications yield OMI NO 2 values in the regional product that are1.37 times larger in the Seoul metropolitan region and >2 times larger near substantial point sources. These two modifications also yield an OMI NO 2 product that is in better agreement with the Pandora NO 2 spectrometer measurements acquired during the South Korea–United States Air Quality (KORUS-AQ) field campaign. NO x emissions are then derived for the Seoul metropolitan area during the KORUS-AQ field campaign using a top-down approach with the standard and regional NASA OMI NO 2 products. We first apply the top-down approach to a model simulation to ensure that the method is appropriate: the WRF-Chem simulation utilizing the bottom-up emissions inventory yields a NO x emissions rate of 227±94 kt yr –1 , while the bottom-up inventory itself within a 40 km radius of Seoul yields a NO x emissions rate of198 kt yr –1 . Using the top-down approach on the regional OMI NO 2 product, we derive the NO x emissions rate from Seoul to be 484±201 kt yr –1 , and a 353±146 kt yr –1 NO x emissions rate using the standard NASA OMI NO 2 product. This suggests an underestimate of 53 % and 36 % in the bottom-up inventory using the regional and standard NASA OMI NO 2 products respectively. To supplement this finding, we compare the NO 2 and NO y simulated by WRF-Chem to observations of the same quantity acquired by aircraft and find a model underestimate.When NO x emissions in the WRF-Chem model are increased by a factor of 2.13 in the Seoul metropolitan area, there is better agreement with KORUS-AQ aircraft observations and the recalculated OMI NO 2 tropospheric columns. Finally, we show that by using a WRF-Chem simulation with an updated emissions inventory to recalculate the air mass factor (AMF),there are small differences ( ~8 %) in OMI NO 2 compared tousing the original WRF-Chem simulation to derive the AMF. This suggests that changes in model resolution have a larger effect on the AMF calculation than modifications to the South Korean emissions inventory. Furthermore the current work is focused on South Korea using OMI, the methodology developed in this work can be applied to other world regions using TROPOMI and future satellite datasets (e.g., GEMS and TEMPO) to produce high-quality region-specific top-down NO x emissions estimates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HIGH-FIDELITY SIMULATION-DRIVEN MODEL DEVELOPMENT FOR COARSE-GRAINED COMPUTATIONAL FLUID DYNAMICS

Nuclear reactor safety analysis requires identifying various credible accident scenarios and determining their consequences. For a full-scale nuclear power plant system behavior, it is impossible to obtain sufficient experimental data for a broad range of risk-significant accident scenarios. In single-phase flow convective problems, Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) can provide us with high fidelity results when physical data are unavailable. However, these methods are computationally expensive and cannot be afforded for simulation of long transient scenarios in nuclear accidents despite extraordinary advances in high performance scientific computing over the past decades. The major issue is the inability to make the transient computation parallel, thus making number of time steps required in high-fidelity methods unaffordable for long transients. In this work, we propose to apply a high fidelity simulation-driven approach to model sub-grid scale (SGS) effect in Coarse Grained Computational Fluid Dynamics CG-CFD. This approach aims to develop a statistical surrogate model instead of the deterministic SGS model. We chose to start with a turbulent natural convection case with volumetric heating in a horizontal fluid layer with a rigid, insulated lower boundary and isothermal (cold) upper boundary. This scenario of unstable stratification is relevant to turbulent natural convection in a molten corium pool during a severe nuclear reactor accident, as well as in containment mixing and passive cooling. The presented approach demonstrates how to create a correction for the CG-CFD solution by modifying the energy balance equation. A global correction for the temperature equation proves to achieve a significant improvement to the prediction of steady state temperature distribution through the fluid layer.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On the Linearity of Local and Regional Temperature Changes from 1.5°C to 2°C of Global Warming

Because of the Paris Agreement it is imperative there is greater understanding of the consequences of limiting global warming to the target 1.5° and 2°C levels above preindustrial conditions. It is challenging to quantify changes across a small increment of global warming, so a pattern-scaling approach may be considered. Here we investigate the validity of such an approach by comprehensively examining how well local temperatures and warming trends in a 1.5°C world predict local temperatures at global warming of 2°C. Ensembles of transient coupled climate simulations from multiple models under different scenarios were compared and individual model responses were analyzed. For many places, the multimodel forced response of seasonal-average temperatures is approximately linear with global warming between 1.5° and 2°C. Yet, individual model results vary and large contributions from nonlinear changes in unforced variability or the forced response cannot be ruled out. In some regions, such as East Asia, models simulate substantially greater warming than is expected from linear scaling. Examining East Asia during boreal summer, we find that increased warming in the simulated 2°C world relative to scaling up from 1.5°C is related to reduced anthropogenic aerosol emissions. Our results indicate that, where forcings other than those due to greenhouse gas emissions change, the warming experienced in a 1.5°C world is a poor predictor for local climate at 2°C of global warming. In addition to the analysis of the linearity in the forced climate change signal, we find that natural variability remains a substantial contribution to uncertainty at these low-warming targets.

54 ENVIRONMENTAL SCIENCES↗

A coupled thermo-hydro-mechanical model for simulating leakoff-dominated hydraulic fracturing with application to geologic carbon storage

A potential risk of injecting CO2 into storage reservoirs with marginal permeability (≲ 10 mD (1 mD = 10 –15 m 2 )) is that commercial injection rates could induce fracturing of the reservoir and/or the caprock. Such fracturing is essentially fluid-driven fracturing in the leakoff-dominated regime. Recent studies suggested that fracturing, if contained within the lower portion of the caprock complex, could substantially improve the injectivity without compromising the overall seal integrity. Modeling this phenomenon entails complex coupled interactions among the fluids, the fracture, the reservoir, and the caprock. Here, we develop a simple method to capture all these interplays in high fidelity by sequentially coupling a hydraulic fracturing module with a coupled thermal-hydrological-mechanical (THM) model for nonisothermal multiphase flow. The model was made numerically tractable by taking advantage of self-stabilizing features of leakoff-dominated fracturing. The model is validated against the PKN solution in the leakoff-dominated regime. Moreover, we employ the model to study thermo-poromechanical responses of a fluid-driven fracture in a field-scale carbon storage reservoir that is loosely based on the In Salah project's Krechba reservoir. The model reveals complex yet intriguing behaviors of the reservoir-caprock-fluid system with fracturing induced by cold CO 2 injection. We also study the effects of the in situ stress contrast between the reservoir and caprock and thermal contraction on the vertical containment of the fracture. The proposed model proves effective in simulating practical problems on length and time scales relevant to geological carbon storage.

58 GEOSCIENCES↗

Multiscale Model for Simulating Fission-Induced Recrystallization in U-Mo Alloy

U-Mo alloy is one of the most promising fuels for the future high performance research and test reactors due to its high uranium loading density and stable irradiation behavior. However, a major concern to its qualification is the fuel swelling at high fission density due to the formation of large fission-gas bubbles. The fission-induced recrystallization further expedites the formation and growth of gas bubbles. So far, the exact mechanism of recrystallization is still unclear. One possible driving force for recrystallization is the production of point defects and interstitial loops due to irradiation. Following this, we developed a multi-scale model by integrating the rate-theory and phase-field models to study microstructural evolutions in irradiated U-Mo alloy, i.e., fission-induced gas bubble evolution and recrystallization. Density function theory (DFT) calculations are utilized to predict the defect formation energies, diffusivities of defects, the interfacial energy of gas bubble, and the elastic constants of U-Mo alloy, etc. The dislocation density evolution is predicted by the rate-theory developed by Jeff. The grain subdivision occurs once the dislocation density is above a critical value. The grain growth coupled with gas bubbles evolution is modeled using a multi-phase phase-field model. The effects of fission rate and initial grain microstructure on the recrystallization process are systematically investigated. The simulated dislocation density, sub-grain size distribution, and volume fraction of the recrystallization grains under different fission density are comparable with experimental data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of the accuracy of an offline seasonally-varying matrix transport model for simulating ideal age

Newton-Krylov solvers for ocean tracers have the potential to greatly decrease the computational costs of spinning up deep-ocean tracers, which can take several thousand model years to reach equilibrium with surface processes. One version of the algorithm uses offline tracer transport matrices to simulate an annual cycle of tracer concentrations and applies Newton’s method to find concentrations that are periodic in time. Here we present the impact of time-averaging the transport matrices on the equilibrium values of an ideal-age tracer. We compared annually-averaged, monthly-averaged, and 5-day-averaged transport matrices to an online simulation using the ocean component of the Community Earth System Model (CESM) with a nominal horizontal resolution of 1° × 1° and 60 vertical levels. We found that increasing the time resolution of the offline transport model reduced a low age bias from 12% for the annually-averaged transport matrices, to 4% for the monthly-averaged transport matrices, and to less than 2% for the transport matrices constructed from 5-day averages. The largest differences were in areas with strong seasonal changes in the circulation, such as the Northern Indian Ocean. As a result, for many applications the relatively small bias obtained using the offline model makes the offline approach attractive because it uses significantly less computer resources and is simpler to set up and run.

54 ENVIRONMENTAL SCIENCES↗

Engineering challenges for detectors at the ILC

Over the last years two proposals for experiments at the ILC have been developed, ILD and SID. Extensive R&D has been carried out around the world to develop the needed technologies. Furthermore a first round of engineering studies was made as part of the ILC TDR to understand the integration of these different sub-systems into coherent and integrated detector concepts. Among the key challenges for the sub detectors are the extreme low mass/low power requirements or the extreme channel densities needed in particle flow based detectors. Throughout these studies special care was taken to ensure that the engineering models and the simulation models, used in studies of the physics capabilities of the detectors, stay synchronized. In the near future, the models will need to be evolved to take the special requirements of the potential ILC site in Japan into account. Furthermore, the state of the integration of the detectors, and the future directions, will be discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observations Indicate That Clouds Amplify Mechanisms of Southern Ocean Heat Uptake

Abstract The Southern Ocean has absorbed most of the excess heat associated with anthropogenic greenhouse gas emissions. Since Southern Ocean observations are sparse in certain regions and seasons, much of our knowledge of ocean heat uptake is based on climate model simulations. However, climate models still inadequately represent some properties of Southern Ocean clouds, and they have not identified the mechanisms by which clouds may affect Southern Ocean heat uptake (SOHU). Here, we use the ERA5 and JRA‐55 reanalyses to assess the influence of clouds and other atmospheric processes on SOHU from 1979 to 2020. We find that years with the highest SOHU between 45° and 65°S are dominated by ocean heat uptake anomalies during winter and spring, but not during summer or fall. Winter and spring cloud cover are up to 7% higher when SOHU is up to 5.5 W/m 2 higher than the climatological seasonal mean, with the largest increases in the South Pacific Ocean. Clouds also contain more liquid water. These changes in cloud properties increase downwelling longwave radiation, amplifying ocean heat uptake. Cloud changes are also concomitant with a more stable lower atmosphere, which suppresses turbulent heat fluxes out of the surface. Overall, we find that SOHU is likely not mediated by enhanced surface shortwave absorption over the observational time period. A better understanding of how atmospheric processes impact ocean heat uptake may help improve our understanding of ocean heat uptake mechanisms in the current generation of climate models.

54 ENVIRONMENTAL SCIENCES↗

Increasing Hurricane Intensification Rate Near the US Atlantic Coast

Hurricanes often cause severe damage and loss of life, and storms that intensify close to the coast pose a particularly serious threat. While changes in hurricane intensification and environment have been examined at basin scales previously, near-coastal changes have not been adequately explored. In this study, we address this using a suite of observations and climate model simulations. Over the 40-year period of 1979–2018, the mean 24-hr hurricane intensification rate increased by ~1.2 kt 6-hr –1 near the US Atlantic coast. However, a significant increase in intensification did not occur near the Gulf coast over the same period. The enhanced hurricane intensification along the Atlantic coast is consistent with an increasingly favorable dynamic and thermodynamic environment there, which is well simulated by climate models over the historical period. Further, multi-model projections suggest a continued enhancement of the storm environment and hurricane intensification near the Atlantic coast in the future.

54 ENVIRONMENTAL SCIENCES↗

Thermal conductivity measurements of proton-heated warm dense aluminum

Thermal conductivity is one of the most crucial physical properties of matter when it comes to understanding heat transport, hydrodynamic evolution, and energy balance in systems ranging from astrophysical objects to fusion plasmas. In the warm dense matter regime, experimental data are very scarce so that many theoretical models remain untested. Here we present the first thermal conductivity measurements of aluminum at 0.5–2.7 g/cc and 2–10 eV, using a recently developed platform of differential heating. A temperature gradient is induced in a Au/Al dual-layer target by proton heating, and subsequent heat flow from the hotter Au to the Al rear surface is detected by two simultaneous time-resolved diagnostics. A systematic data set allows for constraining both thermal conductivity and equation-of-state models. Simulations using Purgatorio model or Sesame S27314 for Al thermal conductivity and LEOS for Au/Al release equation-of-state show good agreement with data after 15 ps. Discrepancy still exists at early time 0–15 ps, likely due to non-equilibrium conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of flux ropes in the magnetotail: A three-dimensional global hybrid simulation

Flux ropes in the Earth's magnetotail are widely believed to play a crucial role in energy transport during substorms and the generation of energetic particles. Previous kinetic simulations are limited to the local-scale regime, and thus cannot be used to study the structure associated with the geomagnetic field and the global-scale evolution of the flux ropes. Here, the evolution of flux ropes in the magnetotail under a steady southward interplanetary magnetic field are studied with a newly developed three-dimensional global hybrid simulation model for dynamics ranging from the ion Larmor radius to the global convection time scales. Magnetic reconnection with multiple X-lines is found to take place in the near-tail current sheet at geocentric solar magnetospheric distances x=−30R{sub E}∼−15R{sub E} around the equatorial plane (z=0). The magnetotail reconnection layer is turbulent, with a nonuniform structure and unsteady evolution, and exhibits properties of typical collisionless fast reconnection with the Hall effect. A number of small-scale flux ropes are generated through the multiple X-line reconnection. The diameter of the flux ropes is several R{sub E}, and the spatial scale of the flux ropes in the dawn-dusk direction is on the order of several R{sub E} and does not extend across the entire section of the magnetotail, contrary to previous models and MHD simulation results and showing the importance of the three-dimensional effects. The nonuniform and unsteady multiple X-line reconnection with particle kinetic effects leads to various kinds of flux rope evolution: The small-scale flux ropes propagate earthward or tailward after formation, and eventually merge into the near-Earth region or the mid-/distant-tail plasmoid, respectively. During the propagation, some of the flux ropes can be tilted in the geocentric solar magnetospheric (x,y) plane with respect to the y (dawn-dusk) axis. Coalescence between flux ropes is also observed. At the same time, the evolution of the flux ropes in the multiple X-line reconnection layer can also lead to the acceleration and heating of ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Light-Duty Vehicle Attribute Projections (Years 2015-2030)

This report describes the approach and results associated with projecting vehicle attributes for future light-duty vehicle classes and powertrains, from year 2015 to 2030. The focus is the California light-duty vehicle market and the projected attributes include fuel economy, acceleration, driving range (total and all-electric), and manufacturer suggested retail price from year 2015 to year 2030. Attributes are weighted by California vehicle sales, which are projected using a historically validated consumer choice model - the Automotive Deployment Option Projection Tool (ADOPT) - integrated with a modeling framework that simulates vehicle fuel economy, cost, and acceleration performance while optimizing vehicle components - the Future Automotive Systems Technology Simulator model (FASTSim). Both models were developed at the National Renewable Energy Laboratory and have been adapted to represent the future California light-duty vehicle market for the present report. The analysis includes several scenarios pertaining to electricity and, essentially, electric vehicle demand in California, as established by the Energy Commission. Results suggest that implementation of certain policies, such as the Corporate Average Fuel Economy standards, impacts vehicle attribute projections. The results also show that standards and policy targets are not exclusively met by changes in vehicle attributes, but also through shifts in market demand and sales for certain vehicle powertrains.

33 ADVANCED PROPULSION SYSTEMS↗

Physics Models in Detector Simulation [PowerPoint]

This talk provides an overview of the detector simulation physics models needs of HEP experiments and is restricted to LHC experiments (ALICE, ATLAS, CMS, LHCb) and Belle II and will be focused on the Geant4 toolkit. Other experiments are discussed in other talks. This talk also discuss differences and commonalities among experiments and will identify opportunities for collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tidal Resource Gaps Analysis Technical Report

The tidal resource gaps project was created to address a growing body of evidence that models underpredict tidal current speeds compared to measurements at a number of the top-ranking tidal energy sites. In response, this project compared opportunistic tidal power density measurements from 16 tidal energy hot spot sites with estimates from resource assessment data to identify discrepancies. To improve the accuracy of resource estimates from model data, updated data from eight improved model simulations were obtained. Model improvements included grid refinement, domain coupling, and the use of unstructured or nested grids. New resource estimates were calculated from the updated models, and these data were used to update the tidal hot spots-a list of promising tidal energy sites around the United States.

16 TIDAL AND WAVE POWER↗

Evaluation of Black Carbon Estimations in Global Aerosol Models

We evaluate black carbon (BC) model predictions from the AeroCom model intercomparison project by considering the diversity among year 2000 model simulations and comparing model predictions with available measurements. These model-measurement intercomparisons include BC surface and aircraft concentrations, aerosol absorption optical depth (AAOD) from AERONET and OMI retrievals and BC column estimations based on AERONET. In regions other than Asia, most models are biased high compared to surface concentration measurements. However compared with (column) AAOD or BC burden retreivals, the models are generally biased low. The average ratio of model to retrieved AAOD is less than 0.7 in South American and 0.6 in African biomass burning regions; both of these regions lack surface concentration measurements. In Asia the average model to observed ratio is 0.6 for AAOD and 0.5 for BC surface concentrations. Compared with aircraft measurements over the Americas at latitudes between 0 and 50N, the average model is a factor of 10 larger than observed, and most models exceed the measured BC standard deviation in the mid to upper troposphere. At higher latitudes the average model to aircraft BC is 0.6 and underestimate the observed BC loading in the lower and middle troposphere associated with springtime Arctic haze. Low model bias for AAOD but overestimation of surface and upper atmospheric BC concentrations at lower latitudes suggests that most models are underestimating BC absorption and should improve estimates for refractive index, particle size, and optical effects of BC coating. Retrieval uncertainties and/or differences with model diagnostic treatment may also contribute to the model-measurement disparity. Largest AeroCom model diversity occurred in northern Eurasia and the remote Arctic, regions influenced by anthropogenic sources. Changing emissions, aging, removal, or optical properties within a single model generated a smaller change in model predictions than the range represented by the full set of AeroCom models. Upper tropospheric concentrations of BC mass from the aircraft measurements are suggested to provide a unique new benchmark to test scavenging and vertical dispersion of BC in global models.

09 BIOMASS FUELS↗