Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Effect of driving voltages in dual capacitively coupled radio frequency plasma: A study by nonlinear global model

On the basis of nonlinear global model, a dual frequency capacitively coupled radio frequency plasma driven by 13.56 MHz and 27.12 MHz has been studied to investigate the influences of driving voltages on the generation of dc self-bias and plasma heating. Fluid equations for the ions inside the plasma sheath have been considered to determine the voltage-charge relations of the plasma sheath. Geometrically symmetric as well as asymmetric cases with finite geometrical asymmetry of 1.2 (ratio of electrodes area) have been considered to make the study more reasonable to experiment. The electrical asymmetry effect (EAE) and finite geometrical asymmetry is found to work differently in controlling the dc self-bias. The amount of EAE has been primarily controlled by the phase angle between the two consecutive harmonics waveforms. The incorporation of the finite geometrical asymmetry in the calculations shift the dc self-bias towards negative polarity direction while increasing the amount of EAE is found to increase the dc self-bias in either direction. For phase angle between the two waveforms ϕ = 0 and ϕ = π/2, the amount of EAE increases significantly with increasing the low frequency voltage, whereas no such increase in the amount of EAE is found with increasing high frequency voltage. In contrast to the geometrically symmetric case, where the variation of the dc self-bias with driving voltages for phase angle ϕ = 0 and π/2 are just opposite in polarity, the variation for the geometrically asymmetric case is different for ϕ = 0 and π/2. In asymmetric case, for ϕ = 0, the dc self-bias increases towards the negative direction with increasing both the low and high frequency voltages, but for the ϕ = π/2, the dc-self bias is increased towards positive direction with increasing low frequency voltage while dc self-bias increases towards negative direction with increasing high frequency voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation and decay of low temperature plasma packets in arrays of dielectric microchannels

Propagation of ionization waves in an atmospheric pressure, rare gas background has been observed in arrays of parallel microchannels fabricated in nanostructured alumina (Al{sub 2}O{sub 3}). Propelled by the accumulation of charge on the microchannel wall, packets of low temperature, nonequilibrium plasma propagate at a uniform velocity of {approx}20 km-s{sup -1} in 230 {mu}m wide, 3.5 cm long channels flanked by Al electrodes buried in the Al{sub 2}O{sub 3} wall. Temporally and spatially resolved images of the microchannel plasmas show the ionization wave to have a mean length of {approx}5.2 mm and the dominant mechanism for volumetric electron loss to be dissociative recombination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of confinement in a toroidal plasma subject to strong radial electric fields

The toroidal ring of plasma contained in the NASA Lewis Bumpy Torus facility may be biased to positive or negative potentials approaching 50 kV by applying dc voltages of the respective polarity to 12 or fewer midplane electrode rings. The radial electric fields, which are responsible for raising the ions to high energies by E x B/B-squared drift, then point out of or into the plasma. A preliminary report is given on the identification and optimization of independent variables which affect the ion density and confinement time in the Bumpy Torus plasma. The independent variables include the polarity, position, and number of the midplane electrode rings, the method of gas injection, and the polarity and strength of a weak vertical magnetic field. Some characteristic data taken under conditions where most of the independent variables were optimized are presented. The highest value of the electron number density on the plasma axis is 3.2 trillion per cu cm, the highest ion heating efficiency is 47%, and the longest particle containment time is 2.0 msec.

Roth, J. R.↗

Increasing Efficiency of Energy Output to an Electron Diode by Means of Auxiliary Discharge Generated by Prepulse

This paper examines the source of submicrosecond electron beam with an explosive emission cathode, where the main voltage pulse is preceded by an additional pulse (prepulse). Prepulse with an amplitude of 60 kV and duration of 100 ns is formed by a separate capacitive storage unit, the energy storage of which constitutes 4% of energy storage of the capacitive storage unit of the main discharge circuit. Prepulse allowed reducing the diode resistance on the pulse front to single Ohm units, improving diode matching with the generator and increasing the efficiency of energy output from the low-resistance capacitive storage unit to electron beam by 17%. When amplitude of accelerating voltage pulse is 100 kV, around 65% of energy is inserted into the diode at voltage of over 50 kV. For comparison, when working without a prepulse the share of inserted energy at voltage of over 50 kV does not exceed 35% of the full energy dissipated in the diode. A distinctive feature of the source circuit is absence of the system of additional auxiliary discharge electrodes that is typical for most circuits of diodes with preliminary plasma filling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axial x-ray backlighting of wire-array Z-pinches using X pinches

For the first time, a geometry has been developed to allow for an axial imaging system for wire-array Z-pinch experiments that produce high-resolution x-ray images. The new geometry required a significant redesign of the electrode hardware. Calibrated areal density measurements of the Z-pinch plasma including wire cores, coronal plasma, streaming plasma, and the precursor were obtained. The system used eight-wire molybdenum (Mo) X pinches in series with and directly below the Z-pinch axis to provide micron-scale x-rays sources for point-projection radiography. The images formed on the x-ray sensitive film had a 15 mm diameter field of view at the center height of the array and a magnification of about 7.5:1. Titanium (Ti) filters in front of the film transmitted radiation in the spectral range of 3-5 keV. For calibration, a separate film with the same thickness Ti filter was placed the same distance from the X pinch. This film had an unobstructed path that bypasses the Z-pinch but included step wedges for calibration of the Z-pinch plasma. The step wedges had thicknesses of tungsten (W) ranging from 0.015 to 1.1 {mu}m to obtain areal density measurements of the W plasma from the wire-array. Images had subnanosecond temporal resolution and about 10 {mu}m spatial resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental study of the plasma effect on the generation of microwave radiation in systems with a virtual cathode

Results are presented from experimental studies of the plasma effect on the generation of microwave radiation in systems with a virtual cathode. Using a triode with a virtual cathode as an example, it is shown that the cathode and anode plasmas reduce the generation efficiency; in particular, the power of the generated microwave radiation decreases and the radiation frequency and the microwave pulse duration change appreciably. It is demonstrated that, at high microwave powers, the power radiated into free space can be reduced by the plasma generated at the surface of the output window. This plasma appears due to discharges developing on the window surface under the combined action of bremsstrahlung, UV radiation, electrons and ions arriving from the beam formation zone, and the microwave electric field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotopic characterisation of prebiotic synthesis of organic material

Many primitive meteorites contain an insoluble organic material, much like terrestrial kerogen, whose mode of origin is currently unknown. When sujbected to stepwise decomposition, this material, unlike its terrestrial counterpart, reveals characteristic release patterns for the stable isotopes of carbon, hydrogen and nitrogen as a function of fractional release of each element. The purpose of this study is to try to match those release patterns using organic matter synthesised in the laboratory under controlled conditions. If successful, such a study would shed light on the origin of kerogen-like organic matter in the early solar system and, by extension, on prebiotic organic synthesis in general. The range of possible syntheses, starting materials and reaction conditions to be investigated is considerable. Samples analysed to date include: a heavy oil produced by Fischer-Tropsch-type catalysis of CO + H2; a solid residue generated by a plasma discharge in CO + H2 + N2; a solid deposited on the electrodes of a Miller-Urey synthesis operating on CH4 + H2O + N2; and a solid residue formed by polymerization of light hydrocarbons procured by a Miller-Urey discharge acting on CH4. Significant structure is observed in the release patterns for the carbon and hydrogen isotopes from the synthetic samples, though there is little evidence for isotopic fractionation during the analysis itself.

Kerridge, J. F.↗

Mathematical Model Of Variable-Polarity Plasma Arc Welding

Mathematical model of variable-polarity plasma arc (VPPA) welding process developed for use in predicting characteristics of welds and thus serves as guide for selection of process parameters. Parameters include welding electric currents in, and durations of, straight and reverse polarities; rates of flow of plasma and shielding gases; and sizes and relative positions of welding electrode, welding orifice, and workpiece.

Hung, R. J.↗

Stepped gradient fuel electrode and method for making the same

The present invention provides for a method of depositing a stepped-gradient fuel electrode onto a fuel cell support 2 and the resulting fuel cell, that comprises placing a solid oxide fuel cell support that has at least an air electrode layer 4 and an electrolyte layer 6 into an atmospheric plasma spraying chamber and measuring spray parameters of an atmospheric plasma spray to obtain reactive oxides, conductive metal and graphite phases. Then spraying the spray parameters onto the solid oxide fuel cell support to produce multiple sub-layers 8 on the solid oxide fuel cell support, and adjusting a hydrogen usage of the atmospheric plasma spray. The adjusting of the hydrogen usage comprises using high hydrogen levels for the initial spraying of the sub-layers producing a first gradient region, and a lower hydrogen level for subsequent spraying of the sub-layers, producing a second gradient region.

Huang, Keqin↗

Optical and Kinetic Characteristics of an Atmospheric Pressure Pulsed Discharge in Helium with Iron Vapor

The emission spectrum of a near-cathode plasma of a pulsed discharge in atmospheric pressure helium reveals spectral lines of electrode material. Numerical simulation of the kinetics by the Monte Carlo method shows that starting with a fraction of percent, the addition of iron atoms to helium strongly affect the ionization-drift characteristics of electrons in gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron avalanches and diffused {gamma}-mode in radio-frequency capacitively coupled atmospheric-pressure microplasmas

Space-, time- and wavelength-resolved optical emission profiles suggest that the helium emission at 706 nm can be used to indicate the presence of high energy electrons and estimate the sheath in helium rf discharges containing small concentration of air impurities. Furthermore, the experimental data supports the theoretical predictions of energetic electron avalanches transiting across the discharge gap in rf microdischarges and the absence of an {alpha}-mode. Nonetheless, microdischarges sustained between bare metal electrodes and operating in the {gamma}-mode can produce diffuse glowlike discharges rather than the typical radially constricted plasmas observed in millimeter-size rf atmospheric-pressure {gamma} discharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Some aspects of ion sheath dynamics under the action of pulsed voltage

The time evolution of an unsteady cathode ion sheath in plasma has been studied numerically. The calculations demonstrate the presence of spikes in the ion current density and electric field strength at the cathode. The amplitudes of these spikes significantly exceeds the steady-state level, which agrees with data from other studies. Approximate formulas are derived that describe the spike amplitudes as functions of the rise time and amplitude of the applied voltage pulse, the mass and charge of ions, and the density and temperature of plasma electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A comparison of diamond growth rate using in-liquid and conventional plasma chemical vapor deposition methods

In order to make high-speed deposition of diamond effective, diamond growth rates for gas-phase microwave plasma chemical vapor deposition and in-liquid microwave plasma chemical vapor deposition are compared. A mixed gas of methane and hydrogen is used as the source gas for the gas-phase deposition, and a methanol solution of ethanol is used as the source liquid for the in-liquid deposition. The experimental system pressure is in the range of 60-150 kPa. While the growth rate of diamond increases as the pressure increases, the amount of input microwave energy per unit volume of diamond is 1 kW h/mm{sup 3} regardless of the method used. Since the in-liquid deposition method provides a superior cooling effect through the evaporation of the liquid itself, a higher electric input power can be applied to the electrodes under higher pressure environments. The growth rate of in-liquid microwave plasma chemical vapor deposition process is found to be greater than conventional gas-phase microwave plasma chemical vapor deposition process under the same pressure conditions.

36 MATERIALS SCIENCE↗

Resistance switching at the Al/SrTiO{sub 3-x}N{sub y} anode interface

The electroformation and resistance switching behavior of Al/SrTiO{sub 3-x}N{sub y}/Al have been investigated. The resistance of Al/SrTiO{sub 3-x}N{sub y}/Al irreversibly increases when voltages higher than a certain threshold voltage are applied. A bistable resistance switching develops at one of the Al electrodes that performs as the anode. The formation of stacking faults in SrTiO{sub 3-x}N{sub y} during preparation by microwave plasma treatment is a prerequisite for the occurrence of switching as confirmed by site-specific high resolution transmission electron microscopy at the electrode interfaces. The resistance switching effect is discussed by considering the role of stacking fault defects in the oxygen/nitrogen diffusion at the anode metal-oxynitride interface.

36 MATERIALS SCIENCE↗

Plasma nitriding monitoring reactor: A model reactor for studying plasma nitriding processes using an active screen

A laboratory scale plasma nitriding monitoring reactor (PLANIMOR) has been designed to study the basics of active screen plasma nitriding (ASPN) processes. PLANIMOR consists of a tube reactor vessel, made of borosilicate glass, enabling optical emission spectroscopy (OES) and infrared absorption spectroscopy. The linear setup of the electrode system of the reactor has the advantages to apply the diagnostic approaches on each part of the plasma process, separately. Furthermore, possible changes of the electrical field and of the heat generation, as they could appear in down-scaled cylindrical ASPN reactors, are avoided. PLANIMOR has been used for the nitriding of steel samples, achieving similar results as in an industrial scale ASPN reactor. A compact spectrometer using an external cavity quantum cascade laser combined with an optical multi-pass cell has been applied for the detection of molecular reaction products. This allowed the determination of the concentrations of four stable molecular species (CH{sub 4}, C{sub 2}H{sub 2}, HCN, and NH{sub 3}). With the help of OES, the rotational temperature of the screen plasma could be determined.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimization of confinement in a toroidal plasma subject to strong radial electric fields

A preliminary report on the identification and optimization of independent variables which affect the ion density and confinement time in a bumpy torus plasma is presented. The independent variables include the polarity, position, and number of the midplane electrode rings, the method of gas injection, and the polarity and strength of a weak vertical magnetic field. Some characteristic data taken under condition when most of the independent variables were optimized are presented. The highest value of the electron number density on the plasma axis is 3.2 x 10 to the 12th power/cc, the highest ion heating efficiency is 47 percent, and the longest particle containment time is 2.0 milliseconds.

Roth, J. R.↗

Phase-shift effect in capacitively coupled plasmas with two radio frequency or very high frequency sources

A two-dimensional fluid model was built to study the argon discharge in a capacitively coupled plasma reactor and the full set of Maxwell equations is included in the model to understand the electromagnetic effect in the capacitive discharge. Two electrical sources are applied to the top and bottom electrodes in our simulations and the phase-shift effect is focused on. We distinguish the difference of the phase-shift effect on the plasma uniformity in the traditional radio frequency discharge and in the very high frequency discharge where the standing wave effect dominates. It is found that in the discharges with frequency 13.56 MHz, the control of phase difference can less the influence of the electrostatic edge effect, and it gets the best radial uniformity of plasma density at the phase difference {pi}. But in the very high frequency discharges, the standing wave effect plays an important role. The standing wave effect can be counteracted at the phase difference 0, and be enhanced at the phase difference {pi}. The standing wave effect and the edge effect are balanced at some phase-shift value between 0 and {pi}, which is determined by discharge parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗