Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FILAMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Divertor leg filaments in NSTX-U

This study presents the first observation of divertor localized turbulence in the NSTX-Upgrade spherical tokamak. Previous work in NSTX discharges described fluctuations on the divertor target due to blobs generated on the low field side midplane. In the region that shows disconnection from upstream turbulence (private flux region and proximity of the strike point), divertor-localized fluctuations are observed via imaging of C III and D-α emission in diverted L-mode discharges and are characterized in this paper. Field-aligned filaments connected to the divertor target plate are radially localized at the separatrix on the outer divertor leg and in the private flux region on the inner divertor leg. These are limited to the region below the X-point with fluctuation levels up to 10%–20%. The filaments have comparable poloidal and radial correlation lengths (10–100 ion gyroradii ρ i ) and parallel correlation lengths of several meters. Toroidal mode numbers are in the range of 10–30 and 2–10 for outer and inner leg filaments. The poloidal motion of outer leg filaments has the same direction and comparable magnitude to advection due to E x B drift calculated by the multi-fluid edge transport code UEDGE with inclusion of cross field drifts. Disconnection between inner and outer leg filaments as well as the absence of correlation with upstream turbulence support the hypothesis of X-point disconnection for divertor leg filaments. Simulations with the ArbiTER linear eigenvalue solver and a resistive-balooning model were performed with a simulation grid limited to the divertor legs. Instabilities localized to the bad curvature side of the divertor legs were observed, in qualitative agreement with the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

VLA observations of solar active regions at 6 cm wavelength

Synthesized maps of two solar active regions obtained from observations with the Very Large Array (VLA) with 9-arcsec resolution are presented. The most intense sources in these regions are found to be associated with filamentary structures and magnetic neutral lines as shown in H-alpha and photospheric magnetograms. These sources are not located directly over sunspots in disagreement with earlier observations. EUV and X-ray observations have suggested that similar structures should be visible at cm wavelengths around but, outside of, sunspots if the magnetic field is sufficiently strong. These results are consistent with the locations of hot (greater than 1,000,000 K) plasmas in active regions expected from generalization based on optical photographs. Given the sizes of the radio sources, the volume emission measures of soft X-rays observed from OSO-8 rule out the possibility of thermal bremsstrahlung being of any significance, as far as the 6 cm emission is concerned. Therefore, gyroresonance absorption process is the most likely cause of 6 cm emission from these sources, and its likelihood is enhanced by the magnetic field geometry that is known to exist over filaments and neutral lines.

Kundu, M. R.↗

Fungal elemental profiling unleashed through rapid laser-induced breakdown spectroscopy (LIBS)

ABSTRACT Elemental profiling of fungal species as a phenotyping tool is an understudied topic and is typically performed to examine plant tissue or non-biological materials. Traditional analytical techniques such as inductively coupled plasma–optical emission spectroscopy (ICP-OES) and inductively coupled plasma–mass spectrometry (ICP-MS) have been used to identify elemental profiles of fungi; however, these techniques can be cumbersome due to the difficulty of preparing samples. Additionally, the instruments used for these techniques can be expensive to procure and operate. Laser-induced breakdown spectroscopy (LIBS) is an alternative elemental analytical technique—one that is sensitive across the periodic table, easy to use on various sample types, and is cost-effective in both procurement and operation. LIBS has not been used on axenic filamentous fungal isolates grown in substrate media. In this work, as a proof of concept, we used LIBS on two genetically distinct fungal species grown on a nutrient-rich and nutrient-poor substrate media to determine whether robust elemental profiles can be detected and whether differences between the fungal isolates can be identified. Our results demonstrate a distinct correlation between fungal species and their elemental profile, regardless of the substrate media, as the same strains shared a similar uptake of carbon, zinc, phosphorus, manganese, and magnesium, which could play a vital role in their survival and propagation. Independently, each fungal species exhibited a unique elemental profile. This work demonstrates a unique and valuable approach to rapidly phenotype fungi through optical spectroscopy, and this approach can be critical in understanding these fungi's behavior and interactions with the environment. IMPORTANCE Historically, ionomics, the elemental profiling of an organism or materials, has been used to understand the elemental composition in waste materials to identify and recycle heavy metals or rare earth elements, identify the soil composition in space exploration on the moon or Mars, or understand human disorders or disease. To our knowledge, ionomic profiling of microbes, particularly fungi, has not been investigated to answer applied and fundamental biological questions. The reason is that current ionomic analytical techniques can be laborious in sample preparation, fail to measure all potential elements accurately, are cost-prohibitive, or provide inconsistent results across replications. In our previous efforts, we explored whether laser-induced breakdown spectroscopy (LIBS) could be used in determining the elemental profiles of poplar tissue, which was successful. In this proof-of-concept endeavor, we undertook a transdisciplinary effort between applied and fundamental mycology and elemental analytical techniques to address the biological question of how LIBS can used for fungi grown axenically in a nutrient-rich and nutrient-poor environment.

59 BASIC BIOLOGICAL SCIENCES↗

Fungal elemental profiling unleashed through rapid laser-induced breakdown spectroscopy (LIBS)

Elemental profiling of fungal species as a phenotyping tool is an understudied topic and is typically performed to examine plant tissue or non-biological materials. Traditional analytical techniques such as inductively coupled plasma–optical emission spectroscopy (ICP-OES) and inductively coupled plasma–mass spectrometry (ICP-MS) have been used to identify elemental profiles of fungi; however, these techniques can be cumbersome due to the difficulty of preparing samples. Additionally, the instruments used for these techniques can be expensive to procure and operate. Laser-induced breakdown spectroscopy (LIBS) is an alternative elemental analytical technique—one that is sensitive across the periodic table, easy to use on various sample types, and is cost-effective in both procurement and operation. LIBS has not been used on axenic filamentous fungal isolates grown in substrate media. In this work, as a proof of concept, we used LIBS on two genetically distinct fungal species grown on a nutrient-rich and nutrient-poor substrate media to determine whether robust elemental profiles can be detected and whether differences between the fungal isolates can be identified. This data set contains the raw LIBS spectral data for the summarized results described inRush, et. al. 2024

elemental profiling↗

Reverse Current Model for Coronal Mass Ejection Cavity Formation

In this work, we present a new model for explaining the three-part structure of coronal mass ejections (CMEs). The model proposes that the cavity in a CME forms because a rising electric current in the core prominence induces an oppositely directed electric current in the background plasma; this eddy current is required to satisfy the frozen-in magnetic flux condition in the background plasma. The magnetic force between the inner-core electric current and the oppositely directed induced eddy current propels the background plasma away from the core, creating a cavity and a density pileup at the cavity edge. The cavity radius saturates when an inward restoring force from magnetic and hydrodynamic pressure in the region outside the cavity edge balances the outward magnetic force. The model is supported by (i) laboratory experiments showing the development of a cavity as a result of the repulsion of an induced reverse current by a rising inner-core flux-rope current, (ii) 3D numerical magnetohydrodynamic (MHD) simulations that reproduce the laboratory experiments in quantitative detail, and (iii) an analytic model that describes cavity formation as a result of the plasma containing the induced reverse current being repelled from the inner core. This analytic model offers broad applicability because the predicted cavity widths are relatively independent of both the current injection mechanism and the injection timescale.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTIPLE SHOCK STRUCTURES IN A RADIO-SELECTED CLUSTER OF GALAXIES

We present a new radio-selected cluster of galaxies, 0217+70, using observations from the Very Large Array and archival optical and X-ray data. The new cluster is one of only seven known that has candidate double peripheral radio relics, and the second of those with a giant radio halo (GRH), as well. It also contains unusual diffuse radio filaments interior to the peripheral relics and a clumpy, elongated X-ray structure. All of these indicate a very actively evolving system, with ongoing accretion and merger activity, illuminating a network of shocks, such as those first seen in numerical simulations. The peripheral relics are most easily understood as outgoing spherical merger shocks with large variations in brightness along them, likely reflecting the inhomogeneities in the shocks' magnetic fields. The interior filaments could be projections of substructures from the sheet-like peripheral shocks or they might be separate structures due to multiple accretion events. ROSAT images show large-scale diffuse X-ray emission coincident with the GRH and additional patchy diffuse emission that suggests a recent merger event. This uniquely rich set of radio shocks and halo offer the possibility, with deeper X-ray and optical data and higher resolution radio observations, of testing the models of how shocks and turbulence couple to the relativistic plasma. The cluster 0217+70 is also overluminous in the radio compared with the empirical radio-X-ray correlation for clusters-the third example of such a system. This new population of diffuse radio emission opens up the possibility of probing low-mass cluster mergers with upcoming deep radio continuum surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

HEAVY ION FUSION SCIENCE VIRTUAL NATIONAL LABORATORY2nd QUARTER 2010 MILESTONE REPORTDevelop the theory connecting pyrometer and streak camera spectrometer data to the material properties of beam heatedtargets and compare to the data

This milestone has been accomplished. We have extended the theory that connects pyrometer and streak spectrometer data to material temperature on several fronts and have compared theory to NDCX-I experiments. For the case of NDCX-I, the data suggests that as the metallic foils are heated they break into droplets (cf. HIFS VNL Milestone Report FY 2009 Q4). Evaporation of the metallic surface will occur, but optical emission should be directly observable from the solid or liquid surface of the foil or from droplets. However, the emissivity of hot material may be changed from the cold material and interference effects will alter the spectrum emitted from small droplets. These effects have been incorporated into a theory of emission from droplets. We have measured emission using streaked spectrometry and together with theory of emission from heated droplets have inferred the temperature of a gold foil heated by the NDCX-I experiment. The intensity measured by the spectrometer is proportional to the emissivity times the blackbody intensity at the temperature of the foil or droplets. Traditionally, a functional form for the emissivity as a function of wavelength (such as a quadratic) is assumed and the three unknown emissivity parameters (for the case of a quadratic) and the temperature are obtained by minimizing the deviations from the fit. In the case of the NDCX-I experiment, two minima were obtained: at 7200 K and 2400 K. The best fit was at 7200 K. However, when the actual measured emissivity of gold was used and when the theoretical corrections for droplet interference effects were made for emission from droplets having radii in the range 0.2 to 2.0 microns, the corrected emissivity was consistent with the 2400 K value, whereas the fit emissivity at 7200 K shows no similarity to the corrected emissivity curves. Further, an estimate of the temperature obtained from beam heating is consistent with the lower value. This exercise proved to be a warning to be skeptical of assuming functional forms when they are unknown, and also represents a first success of the droplet emission theory. The thermal optical emission from a hot metal surface is polarized (for observation angles that are not normal to the surface). By observing the intensity of both polarizations at two or more observation angles the emissivity can be inferred directly, and the temperature at the surface unambiguously determined. Emission from the spolarization (where the E-field is parallel to the surface and normal to the wave vector) is generally less intense than emission from the p-polarization (E-field that is normal to the s-polarization E-field and the wave vector.) The emissivity and temperature may be inferred directly without assuming any specific functional form for the emissivity or resorting to published data tables (which usually do not apply when temperatures reach the WDM regime). We have derived the theory of polarized emission from hot metals, and consider an improved method of temperature determination that takes advantage of polarization measurements, which we call polarization pyrometry. Thus far we have successfully applied the theory to electrically heated metallic filaments, and will apply the theory to beam heated targets when chamber space constraints are removed that will make it feasible to observe the targets at multiple angles. For the case of experiments on NDCX-II, hydrodynamic expansion on a nanosecond timescale that is comparable to the heating time will result in an expanding fluid, with a strong (but finite) density and temperature gradient. Emission will be observed from positions in the foil near the critical density (where the observation photon frequency is equal to the local plasma frequency). By assuming a brightness temperature equal to the local fluid temperature at the critical frequency, a time history of the emission spectrum from an expanding foil can be synthesized from a hydrodynamic simulation of the target. We find that observations from the ultraviolet to the infrared will allow a probing of the target at different depths, and will allow a test of specific equations of state. Improved versions of this theory that integrate the electric field along a ray from the interior of the metal to observation point are being constructed to give a more accurate description of the emitted spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiwavelength Study of Equatorial Coronal-Hole Jets

Jets (transient/collimated plasma ejections) occur frequently throughout the solar corona and contribute mass/energy to the corona and solar wind. By combining numerical simulations and high-resolution observations, we have made substantial progress recently on determining the energy buildup and release processes in these jets. Here we describe a study of 27 equatorial coronal-hole jets using Solar Dynamics Observatory/Atmospheric Imaging Assembly and Helioseismic and Magnetic Imager observations on 2013 June 27–28 and 2014 January 8–10. Out of 27 jets, 18 (67%) are associated with mini-filament ejections; the other nine (33%) do not show mini-filament eruptions but do exhibit mini-flare arcades and other eruptive signatures. This indicates that every jet in our sample involved a filament-channel eruption. From the complete set of events, six jets (22%) are apparently associated with tiny flux-cancellation events at the polarity inversion line, and two jets (7%) are associated with sympathetic eruptions of filaments from neighboring bright points. Potential-field extrapolations of the source-region photospheric magnetic fields reveal that all jets originated in the fan-spine topology of an embedded bipole associated with an extreme ultraviolet coronal bright point. Hence, all our jets are in agreement with the breakout model of solar eruptions. We present selected examples and discuss the implications for the jet energy buildup and initiation mechanisms.

Sun Activity↗

Numerical Stress Analysis during Cooldown and Compressive Loading in an Imperfect Nb 3 Sn Wire

In this paper, high field superconductors are critical to the success of next step magnetic fusion confinement devices such as ITER and DEMO. The low-temperature superconducting material that is currently favored for these applications, Nb 3 Sn, is susceptible to performance due to its brittleness and high strain-sensitivity. Under extreme loads, an irreversible degradation in the maximum critical current density has been shown to occur and believed to be strongly influenced by two factors: plasticity and cracked filaments. Cracks in filaments are induced when sufficiently high stress concentrations occur in the wire. In this paper, we explore using finite element analysis the impact that voids have on the stress distributions and peak stresses under two loading conditions: transverse compressive loading in a 2D model, and a full cool down phase in a 3D model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge-localized-mode simulation in CFETR steady-state scenario

We report the EPED1 model and self-consistent core-pedestal coupling in integrated modeling are used to design the pedestal structure of the China Fusion Engineering Testing Reactor (CFETR) steady-state scenario. The key parameters, such as β p and q 95 , are based on the grassy edge-localized-mode (ELM) experimental database. In this work, we use the BOUT++ six-field two-fluid code to simulate the onset of the ELM in the CFETR steady-state scenario. The ELM size is around 0.2% in nonlinear simulations, which is in the experimental range of the grassy ELM discharges, 0.1%–1% observed in multiple tokamak devices. Linear and nonlinear simulations show that the dominant high-n ballooning modes peak around n = 40. Compared to type-I ELM crashing dynamics, grassy ELM crashing has a smaller initial crash and is then followed by three phases of turbulence spreading, which are dominated by multi-modes, a high-n mode of n = 45 and low-n mode of n = 5, respectively. In contras to type-I ELM, the perturbation of the high-n mode has a narrow width around ψ = 0.95, and magnetic island formation and reconnection occur only beyond ψ = 0.95, leading to a small initial crash. Mode–mode interaction in the multi-mode coexistence stage stops the growth of individual modes and reduces the transport of particles and heat, and these are the two reasons why the ELM size is small. In–out asymmetry of transient heat flux with a ratio of E out /E in = 3.5 is found during grassy ELM crash. The rise and delay times of the heat flux match the calculation from the free-streaming model. To evaluate the erosion of the divertor target, the energy fluence at the outer divertor target is calculated, which is 0.029 MJ m -2 , 5.5 times smaller than the tungsten melting limit 0.16 MJ m -2 . The calculated energy fluency still follows the experimental scaling law from type-I ELM experiments. The fluctuation eddies in the toroidal direction show a filament structure at the outer mid-plane. Parallel heat flux patterns with a toroidal mode number n = 10 are found at the outer divertor with an amplitude of 680 MW m -2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compound streams, magnetic clouds, and major geomagnetic storms

Data from ISEE 3, Helios A, and Helios B were used to identify the components of two compound streams and to determine their configurations. In one case, ejecta containing a magnetic cloud associated with a disappearing quiescent filament were interacting with a corotating stream. In the second case, ejecta containing a magnetic cloud associated with a 2B flare were overtaking ejecta from a different source. Each of these compound streams produced an unusually large geomagnetic storm, on April 3, 1979, and on April 25, 1979, respectively. The largest geomagnetic storm in the period 1968-1986, which occurred on July 13, 1982, was associated with a compound stream. Thirty geomagnetic storms with A(p) greater than 90 occurred between 1972 and 1983, and there are interplanetary magnetic field and plasma data for 17 of these events. The data suggest that most large geomagnetic storms are associated with compound streams and/or magnetic clouds.

Burlaga, L. F.↗

SMALL-SCALE, DYNAMIC BRIGHT BLOBS IN SOLAR FILAMENTS AND ACTIVE REGIONS

High-cadence high spatial resolution observations in H{alpha} with the Swedish 1 m Solar Telescope on La Palma have revealed the existence of small-scale highly dynamic bright blobs. A fast wavelength tuning spectropolarimeter provides spectral information of these structures. The blobs slide along thin magnetic threads at speeds in the range from 45 km s{sup -1} to 111 km s{sup -1}. The blobs have a slightly elongated shape and their lengths increase by a factor of three from close to half an arcsecond when they first appear until they disappear one to two minutes later. The brightest blobs show the highest speed. The widths of the H{alpha} line emission of the blobs correspond to non-thermal velocities in the plasma less than 10 km s{sup -1}, which implies that they are not the result of shock-driven heating. The dynamic character of the bright blobs is similar to what can be expected from an MHD fast-mode pulse.

79 ASTRONOMY AND ASTROPHYSICS↗

OBSERVATIONAL ASPECTS OF THE THREE-DIMENSIONAL CORONAL STRUCTURE OVER A SOLAR ACTIVITY CYCLE

Solar rotational tomography is applied to almost eleven years of Large Angle Spectrometric Coronagraph C2/Solar and Heliospheric Observatory data, revealing for the first time the behavior of the large-scale coronal density structures, also known as streamers, over almost a full solar activity cycle. This study gives an overview of the main results of this project. (1) Streamers are most often shaped as extended, narrow plasma sheets. The sheets can be extremely narrow at times (<=0.14 x 10{sup 6} km at 4 R{sub sun}). This is over twice their heliocentric angular thickness at 1 AU. (2) At most times outside the height of solar maximum, there are two separate stable large helmet streamer belts extending from mid-latitudes (in both north and south). At solar minimum, the streamers converge and join near the equator, giving the impression of a single large helmet streamer. Outside of solar minimum, the two streamers do not join, forming separate high-density sheets in the extended corona (one in the north, another in the south). At solar maximum, streamers rise radially from their source regions, while during the ascending and descending activity phases, streamers are skewed toward the equator. (3) For most of the activity cycle, streamers share the same latitudinal extent as filaments on the disk, showing that large-scale stable streamers are closely linked to the same large-scale photospheric magnetic configuration, which give rise to large filaments. (4) The poleward footpoints of the streamers are often above crown polar filaments and the equatorial footpoints are above filaments or active regions (or above the photospheric neutral lines which underlie these structures). The high-density structures arising from the equatorial active regions either rise and form the equatorial footpoints of mid-latitude quiescent streamers, or form unstable streamers at the equator, not connected to the quiescent streamer structure at higher latitude (so there are often three streamer sheets sharing the same extended longitudinal region). (5) Comparison between the tomography results and a potential field source surface model shows that streamers are not necessarily associated with a magnetic polarity reversal, but rather are regions containing field lines arising from widely separated sources at the Sun. We call these convergence sheets. (6) There is considerable differential rotation of streamers at high latitudes, which makes comparison between disk and coronal structure complicated. The presence of differential rotation has implications for many areas of coronal and heliospheric research.

79 ASTRONOMY AND ASTROPHYSICS↗

Excitation of long electrostatic solitary waves in ion beam neutralization process

Unusually long electrostatic solitary waves (ESWs) are discovered in a particle-in-cell simulation study of the process of ion beam neutralization by electron emission from a filament. These ESWs are long because the density perturbation responses to the potential wells created by the ESWs are very small. Notably, the density perturbation is small because the trapped (positive) and untrapped (negative) electron density perturbations nearly compensate each other because of a non-Maxwellian electron velocity distribution in the beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

VLA observations of the coronal plasma

VLA observations at 20 cm wavelength specify the brightness temperature and magnetic structure of plasma constrained within coronal loops in solar active regions. Comparisons with simultaneous SMM observations at soft x ray wavelengths lead to measurements of physical parameters like electron density, electron temperature and magnetic field strength. Such comparisons also indicate coronal loops can be detected at either radio or x ray wavelengths while remaining invisible in the other spectral domain, and that the dominant radiation mechanisms can be thermal bremsstrahlung or thermal gyroresonance radiation. VLA observations at the longer 90 cm wavelength reveal the thermal emission of a hot transition sheath enveloping a cooler, underlying H alpha filament seen in absorption. The 20 cm VLA observations indicate that the precursor, impulsive and post-flare components of solar flares originate in spatially separated and resolved sources. The 90 cm VLA data indicate that time-correlated radio bursts can occur in active regions on opposite sides of the solar equator. These regions are apparently linked by large scale, trans-equatorial magnetic loops at least 2.6 x 10(exp 5) km (or 6 feet) long; these loops act as magnetic conduits for relativistic electrons moving at one-third the velocity of light.

Lang, Kenneth R.↗

Magnetic clouds, helicity conservation, and intrinsic scale flux ropes

An intrinsic-scale flux-rope model for interplanetary magnetic clouds, incorporating conservation of magnetic helicity, flux and mass is found to adequately explain clouds' average thermodynamic and magnetic properties. In spite their continuous expansion as they balloon into interplanetary space, magnetic clouds maintain high temperatures. This is shown to be due to magnetic energy dissipation. The temperature of an expanding cloud is shown to pass through a maximum above its starting temperature if the initial plasma beta in the cloud is less than 2/3. Excess magnetic pressure inside the cloud is not an important driver of the expansion as it is almost balanced by the tension in the helical field lines. It is conservation of magnetic helicity and flux that requires that clouds expand radially as they move away from the Sun. Comparison with published data shows good agreement between measured cloud properties and theory. Parameters determined from theoretical fits to the data, when extended back to the Sun, are consistent with the origin of interplanetary magnetic clouds in solar filament eruptions. A possible extension of the heating mechanism discussed here to heating of the solar corona is discussed.

Kumar, A.↗

The Physics of Cooling Flow Clusters with Central Radio Sources

Central galaxies in rich clusters are the sites of cluster cooling flows, with large masses of gas cooling through part of the X-ray band. Many of these galaxies host powerful radio sources. These sources can displace and compress the X-ray gas leading to enhanced cooling and star formation. We observed the bright cooling flow Abell 2626 with a strangely distorted central radio source. We wished to understand the interaction of radio and X-ray thermal plasma, and to determine the dynamical nature of this cluster. One aim was to constrain the source of additional pressure in radio "holes" in the X-ray emission needed to support overlying shells of X-ray gas. We also aimed to study the problem of the lack of kT < 1-2 keV gas in cooling flows by searching for abundance inhomogeneities, heating from the radio source, and excess absorption. We also have a Chandra observation of this cluster. There were problems with the pipeline processing of this data due to a telemetry dropout. We are publishing the Chandra and XMM data together. Delays with the Chandra data have slowed up the publication. At the center of the cluster, there is a complex interaction of the odd, Z-shaped radio source, and the X-ray plasma. However, there are no clear radio bubbles. Also, the cluster SO galaxy IC 5337, which is projected 1.5 arcmin west of the cluster center, has unusual tail-like structures in both the radio and X-ray. It appears to be falling into the cluster center. There is a hot, probably shocked region of gas to the southwest, which is apparently due to the merger of a subcluster in this part of the system. There is also a merging subcluster to the northeast. The axes of these two mergers agrees with a supercluster filament structure.

Sarazin, Craig L.↗

VLA observations of the coronal plasma

VLA observations at 20 cm wavelength specify the brightness temperature and magnetic structure of plasma constrained within coronal loops in solar active regions. Comparisons with simultaneous SMM observations at soft X-ray wavelengths lead to measurements of physical parameters like electron density, electron temperature and magnetic field strength. Such comparisons also indicate coronal loops can be detected at either radio X-ray wavelengths while remaining invisible in the other spectral domain and that the dominant radiation mechanisms can be thermal bremsstrahlung or thermal gyroresonance radiation. VLA observations at the longer 90 cm wavelength reveal the thermal emission of a hot transition sheath enveloping a cooler, underlying H alpha filament seen in absorption. The 20 cm VLA observations indicate that the precursor, impulsive and post-flare components of solar flares originate in spatially separated and resolved sources. The 90 cm VLA data indicate that time-correlated radio bursts can occur in active regions on opposite sides of the solar equator. These regions are apparently linked by large scale, trans-equatorial magnetic loops at least 2.6 x 10(exp 5) km (or 6 feet) long; these loops act as magnetic conduits for relativistic electrons moving at one-third the velocity of light.

Lang, Kenneth R.↗