Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROFILE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

SITCOMTN-164: AnaCal Shear Profile of Abell 360 in LSSTComCam Data Preview 1

This technote presents the measurement of the weak-lensing shear profile for the Abell 360 galaxy cluster using LSSTComCam data processed with the AnaCal pipeline. We detail the procedures involved in bright-star masking, source selection, and the estimation of tangential and cross shear around the cluster center. The resulting shear profiles provide key insights into the mass distribution of Abell 360 and demonstrate the capabilities of AnaCal in processing early LSST data, with the tangential shear profile detected at 5σ significance.

79 ASTRONOMY AND ASTROPHYSICS↗

Pre-photolithographic GaAs surface treatment for improved photoresist adhesion during wet chemical etching and improved wet etch profiles.

Results of several experiments aimed at remedying photoresist adhesion failure during spray wet chemical etching of InGaP/GaAs NPN HBTs are reported. Several factors were identified that could influence adhesion and a Design of Experiment (DOE) approach was used to study the effects and interactions of selected factors. The most significant adhesion improvement identified is the incorporation of a native oxide etch immediately prior to the photoresist coat. In addition to improving adhesion, this pre-coat treatment also alters the wet etch profile of (100) GaAs so that the reaction limited etch is more isotropic compared to wafers without surface treatment; the profiles have a positive taper in both the [011] and [011] directions, but the taper angles are not identical. The altered profiles have allowed us to predictably yield fully probe-able HBTs with 5 x 5 {micro}m emitters using 5200 {angstrom} evaporated metal without planarization.

36 MATERIALS SCIENCE↗

Measured and predicted temperature profiles along MEMS bridges at pressures from 0.05 to 625 torr.

We will present experimental and computational investigations of the thermal performance of microelectromechanical systems (MEMS) as a function of the surrounding gas pressure. Lowering the pressure in MEMS packages reduces gas damping, providing increased sensitivity for certain MEMS sensors; however, such packaging also dramatically affects their thermal performance since energy transfer to the environment is substantially reduced. High-spatial-resolution Raman thermometry was used to measure the temperature profiles on electrically heated, polycrystalline silicon bridges that are nominally 10 microns wide, 2.25 microns thick, 12 microns above the substrate, and either 200 or 400 microns long in nitrogen atmospheres with pressures ranging from 0.05 to 625 Torr. Finite element modeling of the thermal behavior of the MEMS bridges is performed and compared to the experimental results. Noncontinuum gas effects are incorporated into the continuum finite element model by imposing temperature discontinuities at gas-solid interfaces that are determined from noncontinuum simulations. The experimental and simulation results indicate that at pressures below 0.5 Torr the gas-phase heat transfer is negligible compared to heat conduction through the thermal actuator legs. As the pressure increases above 0.5 Torr, the gas-phase heat transfer becomes more significant. At ambient pressures, gas-phase heat transfer drastically impacts the thermal performance. The measured and simulated temperature profiles are in qualitative agreement in the present study. Quantitative agreement between experimental and simulated temperature profiles requires accurate knowledge of temperature-dependent thermophysical properties, the device geometry, and the thermal accommodation coefficient.

99 GENERAL AND MISCELLANEOUS↗

Definition and Implementation of a SAML-XAMCL Profile for Authorization Interoperability Across Grid Middleware in OSG and EGEE

In order to ensure interoperability between middleware and authorization infrastructures used in the Open Science Grid (OSG) and the Enabling Grids for E-science (EGEE) projects, an Authorization Interoperability activity was initiated in 2006. The interoperability goal was met in two phases: firstly, agreeing on a common authorization query interface and protocol with an associated profile that ensures standardized use of attributes and obligations; and secondly implementing, testing, and deploying on OSG and EGEE, middleware that supports the interoperability protocol and profile. The activity has involved people from OSG, EGEE, the Globus Toolkit project, and the Condor project. This paper presents a summary of the agreed-upon protocol, profile and the software components involved.

97 MATHEMATICS AND COMPUTING↗

The effects of shockwave profile shape and shock obliquity on spallation in Cu and Ta: kinetic and stress-state effects on damage evolution(u)

Widespread research over the past five decades has provided a wealth of experimental data and insight concerning shock hardening and the spallation response of materials subjected to square-topped shock-wave loading profiles. Less quantitative data have been gathered on the effect of direct, in-contact, high explosive (HE)-driven Taylor wave (or triangular-wave) loading profile shock loading on the shock hardening, damage evolution, or spallation response of materials. Explosive loading induces an impulse dubbed a 'Taylor Wave'. This is a significantly different loading history than that achieved by a square-topped impulse in terms of both the pulse duration at a fixed peak pressure, and a different unloading strain rate from the peak Hugoniot state achieved. The goal of this research is to quantify the influence of shockwave obliquity on the spallation response of copper and tantalum by subjecting plates of each material to HE-driven sweeping detonation-wave loading and quantify both the wave propagation and the post-mortem damage evolution. This talk will summarize our current understanding of damage evolution during sweeping detonation-wave spallation loading in Cu and Ta and show comparisons to modeling simulations. The spallation responses of Cu and Ta are both shown to be critically dependent on the shockwave profile and the stress-state of the shock. Based on variations in the specifics of the shock drive (pulse shape, peak stress, shock obliquity) and sample geometry in Cu and Ta, 'spall strength' varies by over a factor of two and the details of the mechanisms of the damage evolution is seen to vary. Simplistic models of spallation, such as P{sub min} based on 1-D square-top shock data lack the physics to capture the influence of kinetics on damage evolution such as that operative during sweeping detonation loading. Such considerations are important for the development of predictive models of damage evolution and spallation in metals and alloys.

36 MATERIALS SCIENCE↗

High voltage photo-switch package module having encapsulation with profiled metallized concavities

A photo-conductive switch package module having a photo-conductive substrate or wafer with opposing electrode-interface surfaces metalized with first metallic layers formed thereon, and encapsulated with a dielectric encapsulation material such as for example epoxy. The first metallic layers are exposed through the encapsulation via encapsulation concavities which have a known contour profile, such as a Rogowski edge profile. Second metallic layers are then formed to line the concavities and come in contact with the first metal layer, to form profiled and metalized encapsulation concavities which mitigate enhancement points at the edges of electrodes matingly seated in the concavities. One or more optical waveguides may also be bonded to the substrate for coupling light into the photo-conductive wafer, with the encapsulation also encapsulating the waveguides.

36 MATERIALS SCIENCE↗

Data Transfer Advisor with Transport Profiling Optimization

The network infrastructures have been rapidly upgraded in many high-performance networks (HPNs). However, such infrastructure investment has not led to corresponding performance improvement in big data transfer, especially at the application layer, largely due to the complexity of optimizing transport control on end hosts. We design and implement ProbData, a PRofiling Optimization Based DAta Transfer Advisor, to help users determine the most effective data transfer method with the most appropriate control parameter values to achieve the best data transfer performance. ProbData employs a profiling optimization based approach to exploit the optimal operational zone of various data transfer methods in support of big data transfer in extreme scale scientific applications. We present a theoretical framework of the optimized profiling approach employed in ProbData as wellas its detailed design and implementation. The advising procedure and performance benefits of ProbData are illustrated and evaluated by proof-of-concept experiments in real-life networks.

Rao, Nageswara S.↗

Validation of the Fast and Thermal Neutron Flux Profiles in the Advanced Test Reactor for the AGR-3/4 Experiment

The AGR-3/4 experiment was designed to irradiate TRISO particle fuel in the Advanced Test Reactor (ATR) at the Idaho National Laboratory. Temperature control of the test capsules containing the TRISO particles was important since the goal was to measure diffusion rates of fission product elements through graphite as a function of temperature. During the experiment, differences were observed between temperatures measured by the thermocouples and temperatures calculated with the thermal analysis model. To rule out the possibility that the used ATR driver fuel elements were the root cause of these temperature differences, an experiment was devised to measure the axial fast and thermal neutron flux profiles in the northeast flux trap containing the AGR-3/4 experiment. An important input parameter to the thermal analysis model was the calculated compact heat rates from the MCNP physics model. To verify these calculated heat rates were consistent with the ATR driver fuel element loading and operating lobe power, axial flux wires were inserted into ATR northeast flux trap. The measured fast and thermal neutron axial flux profiles derived from the flux wire activation showed excellent agreement with the calculated flux profiles. This agreement dispelled any concerns that the used ATR fuel elements in the northeast lobe might have introduced unusual axial flux variation. In addition, the agreement provided a validation basis for the physics calculation, specifically, (1) MCNP physics model, (2) Monte Carlo depletion methodology, (3) method used to load the ATR driver fuel, and (4) ATR measured lobe power data used in the calculation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Poster Abstract: Investigating Occupancy Profiles Using Convolutional Neural Networks: Preprint

In this paper, we implement a convolutional neural networks based autoencoder to investigate occupancy profiles. We use the American time use survey data, which contains 191,558 schedules with binary occupancy information. Our results suggest that the trained filters provide an important insight of occupancy profiles (i.e., dominant and distinct patterns), and the latent space compresses the profiles with representative information.

14 SOLAR ENERGY↗

Talbot-Lau X-Ray Deflectometry for Dynamic Density Profile Measurements

X-ray phase contrast imaging with transmission gratings for density profile measurements is being developed for dynamic experimental applications. Talbot-Lau deflectometry is a new method of measuring x-ray refraction in addition to attenuation and ultra-small angle scattering that has recently been developed for static imaging, primarily for medical and industrial applications. A flash x-ray source, with a spot size much larger than the continuous microfocus sources of static imaging systems, must be used to obtain density profiles from fast-evolving systems, and only a single exposure can be obtained. These new challenges are addressed by introducing an asymmetric setup and developing a forward modeling technique to infer an electron density profile from a single-image, low spatial–resolution system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of in-core neutron noise measurements for axial void profile reconstruction in boiling water reactors

A possibility to reconstruct the axial void profile from the simulated in-core neutron noise which is caused by density fluctuations in a Boiling Water Reactor (BWR) heated channel is considered. For this purpose, a self-contained model of the two-phase flow regime is constructed which has quantitatively and qualitatively similar properties to those observed in real BWRs. The model is subsequently used to simulate the signals of neutron detectors induced by the corresponding perturbations in the flow density. The bubbles are generated randomly in both space and time using Monte-Carlo techniques. The axial distribution of the bubble production is chosen such that the mean axial void fraction and void velocity follow the actual values of BWRs. The induced neutron noise signals are calculated and then processed by the standard signal analysis methods such as Auto-Power Spectral Density (APSD) and Cross-Power Spectral Density (CPSD). Two methods for axial void and velocity profiles reconstruction are discussed: the first one is based on the change of the break frequency of the neutron auto-power spectrum with axial core elevation, while the second refers to the estimation of transit times of propagating steam fluctuations between different axial detector positions. This paper summarizes the principles of the model and presents a numerical testing of the qualitative applicability to estimate the required parameters for the reconstruction of the void fraction profile from the neutron noise measurements. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of local environment on Ly$α$ line profile in DESI/ODIN LAEs

Lyman-Alpha Emitters (LAEs) are star-forming galaxies with significant Ly$α$ emission and are often used as tracers of large-scale structure at high redshift. We explore the relationship between the Ly$α$ line profile and environmental density with spectroscopy from the Dark Energy Spectroscopic Instrument (DESI) of LAEs selected with narrow-band photometry through the One-hundred-deg$^2$ DECam Imaging in Narrowbands (ODIN) survey. We use LAE surface density maps in the N419 (z $\sim$ 2.45) and N501 (z $\sim$ 3.12) narrow bands to probe the relationship between local environmental density and the Ly$α$ line profile. In both narrow bands, we stack the LAE spectra in bins of environmental density and inside and outside of protocluster regions. The N501 data shows $\sim$15% higher Ly$α$ line luminosity for galaxies in protoclusters, suggesting increased star formation in these regions. However, the line luminosity is not appreciably greater in protocluster galaxies in the N419 band, suggesting a potential redshift evolution of this effect. The shape of the line profile itself does not vary with environmental density, suggesting that line shape changes are caused by local effects independent of a galaxy's environment. These data indicate a potential relationship between LAE local environmental density, ionized gas distribution, and Ly$α$ line luminosity.

Uzsoy, Ana M. [Harvard-Smithsonian Ctr. Astrophys.↗

Cosmological constraints from the Planck cluster catalogue with DES shear profiles and Chandra observations

We present cosmological constraints from the Planck PSZ2 cosmological cluster sample, using weak-lensing shear profiles from Dark Energy Survey (DES) data and X-ray observations from the Chandra telescope for the mass calibration. We compute hydrostatic mass estimates for all clusters in the PSZ2 sample with a scaling relation between their Sunyaev-Zeldovich signal and X-ray derived hydrostatic mass, calibrated with the Chandra data. We introduce a method to correct these masses with a hydrostatic mass bias using shear profiles from wide-field galaxy surveys. We simultaneously fit the number counts of the PSZ2 sample and the mass calibration with the DES data, finding $Ω_\text{m}=0.312^{+0.018}_{-0.024}$, $σ_8=0.777\pm 0.024$, $S_8\equiv σ_8 \sqrt{Ω_\text{m} / 0.3}=0.791^{+0.023}_{-0.021}$, and $(1-b)=0.844^{+0.055}_{-0.062}$ for our baseline analysis when combined with BAO data. When considering a hydrostatic mass bias evolving with mass, we find $Ω_\text{m}=0.353^{+0.025}_{-0.031}$, $σ_8=0.751\pm 0.023$, and $S_8=0.814^{+0.019}_{-0.020}$. We verify the robustness of our results by exploring a variety of analysis settings, with a particular focus on the definition of the halo centre used for the extraction of shear profiles. We compare our results with a number of other analyses, in particular two recent analyses of cluster samples obtained from SPT and eROSITA data that share the same mass calibration data set. We find that our results are in overall agreement with most late-time probes, in very mild tension with CMB results (1.6$σ$), and in significant tension with results from eROSITA clusters (2.9$σ$). We confirm that our mass calibration is consistent with the eROSITA analysis by comparing masses for clusters present in both Planck and eROSITA samples, eliminating it as a potential cause of tension.

Aymerich, G. [Orsay, IAS; AIM, Saclay] (ORCID:0009↗

A very high sensitivity RF pulse profile measurement system.

A technique for characterizing the pulse profile of a radio-frequency (RF) amplifier over a very wide power range under fast-pulsing conditions is presented. A pulse-modulated transmitter is used to drive a device under test (DUT) with a phase-coded signal that allows for an increased measurement range beyond standard techniques. A measurement receiver that samples points on the output pulse power profile and performs the necessary signal processing and coherent pulse integration, improving the detectability of low-power signals, is described. The measurement technique is applied to two sample amplifiers under fast-pulsing conditions with a pulsewidth of 250 ns at 3-GHz carrier frequency. A full measurement range of greater than 160 dB is achieved, extending the current state of the art in pulse-profiling techniques.

42 ENGINEERING↗

PARASITIC PROFILE MEASUREMENT OF 1 MW NEUTRON PRODUCTION BEAM AT SNS SUPERCONDUCTING LINAC

A laser wire system has been developed in the Spallation Neutron Source (SNS) superconducting linac (SCL). The SNS laser wire system has a capability of measuring profiles of an operational hydrogen ion beam at 9 cryomodule stations along the SCL by using a single light source. This talk reports our recent study of the laser wire profile measurement performance. Parasitic profile measurements have been conducted at multiple locations of SCL on an operational one-megawatt neutron production beam that SNS recently achieved as a new world record. We will also discuss novel beam diagnostics capabilities at the SNS SCL by using the laser wire system.

43 PARTICLE ACCELERATORS↗

Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles

Abstract Current flowing through an electrolyte is accompanied by continuum motion of ions and solvent, species concentration profiles, and the electric field. While, historically, the understanding of electrolyte transport has predominantly relied on interpreting macroscopic voltage (or current) measurements, recent advances in imaging and spectroscopic techniques allow velocity and concentration profiles to be probed directly. Such detailed information creates exciting opportunities—ranging from verifying theories describing transport in previously studied Li‐ion electrolytes, to new approaches for measuring properties as well as accurately and precisely quantifying transport in more complex electrolytes. Such emerging directions are herein discussed.

25 ENERGY STORAGE↗

Proteomic analysis of hair shafts from monozygotic twins: Expression profiles and genetically variant peptides

Forensic association of hair shaft evidence with individuals is currently assessed by comparing mitochondrial DNA haplotypes of reference and casework samples, primarily for exclusionary purposes. Present work tests and validates more recent proteomic approaches to extract quantitative transcriptional and genetic information from hair samples of monozygotic twin pairs, which would be predicted to partition away from unrelated individuals if the datasets contain identifying information. Protein expression profiles and polymorphic, genetically variant hair peptides were generated from ten pairs of monozygotic twins. Profiling using the protein tryptic digests revealed that samples from identical twins had typically an order of magnitude fewer protein expression differences than unrelated individuals. The data did not indicate that the degree of difference within twin pairs increased with age. In parallel, data from the digests were used to detect genetically variant peptides that result from common nonsynonymous single nucleotide polymorphisms in genes expressed in the hair follicle. Compilation of the variants permitted sorting of the samples by hierarchical clustering, permitting accurate matching of twin pairs. The results demonstrate that genetic differences are detectable by proteomic methods and provide a framework for developing quantitative statistical estimates of personal identification that increase the value of hair shaft evidence.

59 BASIC BIOLOGICAL SCIENCES↗

An Investigation of Hydrogen Depth Profiling Using ToF-SIMS

Hydrogen depth distributions in silicon, zinc oxide and glass are of great interest in material research and industry. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has been used for hydrogen depth profiling for many years. However, some critical information, such as optimal instrumental settings and detection limits, is not easily available from previous publications. In this work, optimal instrumental settings and detection limits of hydrogen in silicon, zinc oxide and common glass were investigated. The recommended experimental settings for hydrogen depth profiling using ToF-SIMS are: (1) keeping pressure in the analysis chamber as low as possible, (2) using a cesium beam for sputtering and monitoring the H{sup -} signal, (3) employing monatomic ion analysis beams with the highest currents, and (4) using interlace mode. In addition, monatomic secondary ions from a matrix are recommended as references to normalize the H{sup -} signal. Detection limits of hydrogen are limited by pressure of residual gases in the analysis chamber. The base pressure of the analysis chamber (with samples) is about 7 x 10{sup -10} mbar in this study, and the corresponding detection limits of hydrogen in silicon, zinc oxide, and common glass are 1.3 x 10{sup 18} atoms/cm{sup 3}, 1.8 x 10{sup 18} atoms/cm{sup 3}, and 5.6 x 10{sup 18} atoms/cm{sup 3}, respectively.

08 HYDROGEN↗