Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Dynamic ground effects

A research program is underway at the NASA Langley Research Center to study the effect of rate of descent on ground effects. A series of powered models were tested in the Vortex Research Facility under conditions with rate of descent and in the 14 x 22 Foot Subsonic Tunnel under identical conditions but without rate of descent. These results indicate that the rate of descent can have a significant impact on ground effects particularly if vectored or reversed thrust is used.

Paulson, John W., Jr.↗

Nuclear propulsion - A vital technology for the exploration of Mars and the planets beyond

The physics and technology issues and performance potential of various direct thrust fission and fusion propulsion concepts are examined. Next to chemical propulsion the solid core fission thermal rocket (SCR) is the only other concept to be experimentally tested at the power (approx 1.5 to 5.0 GW) and thrust levels (approx 0.33 to 1.11 MN) required for manned Mars missions. With a specific impulse of approx 850 s, the SCR can perform various near-earth, cislunar and interplanetary missions with lower mass and cost requirements than its chemical counterpart. The gas core fission thermal rocket, with a specific power and impulse of approx 50 kW/kg and 5000 s offers the potential for quick courier trips to Mars (of about 80 days) or longer duration exploration cargo missions (lasting about 280 days) with starting masses of about 1000 m tons. Convenient transportation to the outer Solar System will require the development of magnetic and inertial fusion rockets (IFRs). Possessing specific powers and impulses of approx 100 kW/kg and 200-300 kilosecs, IFRs will usher in the era of the true Solar System class spaceship. Even Pluto will be accessible with roundtrip times of less than 2 years and starting masses of about 1500 m tons.

Borowski, Stanley K.↗

Confusion-limited galaxy fields. II - Classical analyses

Chokshi and Wright presented a detailed model for simulating angular distribution of galaxy images in fields that extended to very high redshifts. Standard tools are used to analyze these simulated galaxy fields for the Omega(O) = 0 and the Omega(O) = 1 cases in order to test the discriminatory power of these tools. Classical number-magnitude diagrams and surface brightness-color-color diagrams are employed to study crowded galaxy fields. An attempt is made to separate the effects due to stellar evolution in galaxies from those due to the space time geometry. The results show that this discrimination is maximized at near-infrared wavelengths where the stellar photospheres are still visible but stellar evolution effects are less severe than those observed at optical wavelenghts. Rapid evolution of the stars on the asymptotic giant branch is easily recognized in the simulated data for both cosmologies and serves to discriminate between the two extreme values of Omega(O). Measurements of total magnitudes of individual galaxies are not essential for studying light distribution in galaxies as a function of redshift. Calculations for the extragalactic background radiation are carried out using the simulated data, and compared to integrals over the evolutionary models used.

Chokshi, Arati↗

On the stability of the creep substructure in NaCl single crystals

Microstructural observations were conducted on NaCl single crystals after creep. The microstructure after a stress increase followed by a stress decrease consisted primarily of cells; no significant number of subgrains were observed although they were present in the microstructures produced during uninterrupted tests. Prestraining in the exponential creep regime produced an uniform distribution of dislocations and a few subboundaries which transformed to equiaxed subgrains when tested in the power law creep region. This substructure was similar to that observed in an as-received specimen deformed to an equivalent strain. Prior creep in the power law creep region produced equiaxed subgrains whose boundaries were found to be mechanically stable when the specimen was retested in the exponential creep region. The role of subboundary migration in the formation of new subgrains is discussed.

Raj, S. V.↗

Free piston space Stirling technology program

MTI recently completed an initial technology feasibility program for NASA by designing, fabricating and testing a space power demonstrator engine (SPDE). This program, which confirms the potential of free-piston Stirling engines, provided the major impetus to initiate a free-piston Stirling space engine (SSE) technology program. The accomplishments of the SPDE program are reviewed, and an overview of the SSE technology program and technical status to date is provided. It is shown that progress in both programs continues to justify its potential for either nuclear or solar space power missions.

Dochat, G. R.↗

Advanced sensors and instrumentation

NASA is currently investigating the readiness of Advanced Sensors and Instrumentation to meet the requirements of new initiatives in space. The following technical objectives and technologies are briefly discussed: smart and nonintrusive sensors; onboard signal and data processing; high capacity and rate adaptive data acquisition systems; onboard computing; high capacity and rate onboard storage; efficient onboard data distribution; high capacity telemetry; ground and flight test support instrumentation; power distribution; and workstations, video/lighting. The requirements for high fidelity data (accuracy, frequency, quantity, spatial resolution) in hostile environments will continue to push the technology developers and users to extend the performance of their products and to develop new generations.

Calloway, Raymond S.↗

Limits on cold dark matter cosmologies from new anisotropy bounds on the cosmic microwave background

A self-consistent method is presented for comparing theoretical predictions of and observational upper limits on CMB anisotropy. New bounds on CDM cosmologies set by the UCSB South Pole experiment on the 1 deg angular scale are presented. An upper limit of 4.0 x 10 to the -5th is placed on the rms differential temperature anisotropy to a 95 percent confidence level and a power of the test beta = 55 percent. A lower limit of about 0.6/b is placed on the density parameter of cold dark matter universes with greater than about 3 percent baryon abundance and a Hubble constant of 50 km/s/Mpc, where b is the bias factor, equal to unity only if light traces mass.

Vittorio, Nicola↗

Electrooxidation of organics in waste water

Electrooxidation is a means of removing organic solutes directly from waste waters without the use of chemical expendables. Research sponsored by NASA is currently being pursued to demonstrate the feasibility of the concept for oxidation of organic impurities common to urine, shower waters and space-habitat humidity condensates. Electrooxidation of urine and waste water ersatz was experimentally demonstrated. This paper discusses the electrooxidation principle, reaction kinetics, efficiency, power, size, experimental test results and water-reclamation applications. Process operating potentials and the use of anodic oxidation potentials that are sufficiently low to avoid oxygen formation and chloride oxidation are described. The design of an electrochemical system that incorporates a membrane-based electrolyte based on parametric test data and current fuel-cell technology is presented.

Hitchens, G. D.↗

Long Duration Exposure Facility (LDEF) low temperature heat pipe experiment package (HEPP) flight results

The Low Temperature Heat Pipe Flight Experiment (HEPP) is a fairly complicated thermal control experiment that was designed to evaluate the performance of two different low temperature ethan heat pipes. A total of 388 days of continuous operation with an axially grooved aluminum transporter heat pipe and an axially grooved stainless steel heat pipe diode was demonstrated before the EPDS batteries lost power. Preliminary postflight tests showed that the heat pipes are still functioning. A summary of the flight data analysis for the heat pipes and the related support systems is presented.

Mcintosh, Roy↗

Latex samples for RAMSES electrophoresis experiment on IML 2

The objectives of these reported studies were to provide ground based support services for the flight experiment team for the RAMSES experiment to be flown aboard IML-2. The specific areas of support included consultation on the performance of particle based electrophoresis studies, development of methods for the preparation of suitable samples for the flight hardware, the screening of particles to obtain suitable candidates for the flight experiment, and the electrophoretic characterization of sample particle preparations. The first phases of these studies were performed under this contract, while the follow on work was performed under grant number NAG8 1081, 'Preparation and Characterization of Latex Samples for RAMSES Experiment on IML 2.' During this first phase of the experiment the following benchmarks were achieved: Methods were tested for the concentration and resuspension of latex samples in the greater than 0.4 micron diameter range to provide moderately high solids content samples free of particle aggregation which interferred with the normal functioning of the RAMSES hardware. Various candidate latex preparations were screened and two candidate types of latex were identified for use in the flight experiments, carboxylate modified latex (CML) and acrylic acid-acrylamide modified latex (AAM). These latexes have relatively hydrophilic surfaces, are not prone to aggregate, and display sufficiently low electrophoretic mobilities in the flight buffer so that they can be used to make mixtures to test the resolving power of the flight hardware.

Seaman, Geoffrey V. F.↗

Power control electronics for cryogenic instrumentation

In order to achieve a high-efficiency high-density cryogenic instrumentation system, the power processing electronics should be placed in the cold environment along with the sensors and signal-processing electronics. The typical instrumentation system requires low voltage dc usually obtained from processing line frequency ac power. Switch-mode power conversion topologies such as forward, flyback, push-pull, and half-bridge are used for high-efficiency power processing using pulse-width modulation (PWM) or resonant control. This paper presents several PWM and multiresonant power control circuits, implemented using commercially available CMOS and BiCMOS integrated circuits, and their performance at liquid-nitrogen temperature (77 K) as compared to their room temperature (300 K) performance. The operation of integrated circuits at cryogenic temperatures results in an improved performance in terms of increased speed, reduced latch-up susceptibility, reduced leakage current, and reduced thermal noise. However, the switching noise increased at 77 K compared to 300 K. The power control circuits tested in the laboratory did successfully restart at 77 K.

Ray, Biswajit↗

Dynamic and Transient Performance of Turbofan/Turboshaft Convertible Engine With Variable Inlet Guide Vanes

A convertible engine called the CEST TF34, using the variable inlet guide vane method of power change, was tested on an outdoor stand at the NASA Lewis Research Center with a waterbrake dynamometer for the shaft load. A new digital electronic system, in conjunction with a modified standard TF34 hydromechanical fuel control, kept engine operation stable and safely within limits. All planned testing was completed successfully. Steady-state performance and acoustic characteristics were reported previously and are referenced. This report presents results of transient and dynamic tests. The transient tests measured engine response to several rapid changes in thrust and torque commands at constant fan (shaft) speed. Limited results from dynamic tests using the pseudorandom binary noise technique are also presented. Performance of the waterbrake dynamometer is discussed in an appendix.

McArdle, Jack G.↗

Configurable Hardware And Software For Multiple Related Uses

Control Monitor Unit (CMU) is system of configurable hardware and software undergoing development for use in controlling and monitoring complex systems of equipment. Provides comprehensive array of capabilities for such functions as processing equipment-test data for calibration and diagnosis, controlling operation of equipment in real time, simulating operation of equipment, and processing large streams of scientific-measurement data. Automates many of ground operations involved in preparing and testing spacecraft prior to launch. Also useful in variety of similar applications; for example, testing aircraft, ships, power plants, and automated production lines.

Uhrlaub, David R.↗

STS-81 Flight Day 10

On this tenth day of the STS-81 mission, the flight crew, Cmdr. Michael A. Baker, Pilot Brent W. Jett, Mission Specialists, John M. Grunsfeld, Marsha S. Ivins, Peter J.K. Wisoff, and John Blaha, prepare for the return back to earth. The shuttle's key flight control systems are checked for entry and landing phase of the mission. Commander Mike Baker and Pilot Brent Jett activate one of Atlantis' three hydraulic power units to test the shuttle's aerosurfaces. Baker and Jett fire Atlantis' steering jets in a routine prelanding checkout. The astronauts also test a medical restraint system in the Spacehab module, placing two crewmembers in the device. Crewmembers then begin to stow items away in the crew cabin, initiate the scheduled deactivation of Spacehab systems and associated hardware.

Source record↗

Sorption cooling of astrophysics science instruments

The current status of continuous and periodic operation sorption cryocooler development for astrophysics missions requiring refrigeration to 4 K and below, is reviewed. These coolers are suited for the cooling of detectors in planned astrophysics missions such as the exploration of neighboring planetary systems planet finder array (ExNPS PFA). The cooler requirements imposed by these missions include a ten-year life, zero vibration, zero electromagnetic interference and electromagnetic charging operation, and the ability to scale designs to provide low refrigeration capability with low power consumption. Spaceflight test results are summarized for the brilliant eyes 10 K sorption cryocooler experiment. This experiment successfully validated flight cooler performance and provided characterization of all sorption cooler design parameters which may have shown sensitivity to microgravity effects. Ground test results from a continuous 25 K cooler planned for use in a long duration airborne balloon experiment are presented. A NASA program to develop 30 K, 10 K and 4 K vibration-free coolers for astrophysics missions is outlined.

Wade, Lawrence A.↗

Technology Projections for Solar Dynamic Power

Solar Dynamic power systems can offer many potential benefits to Earth orbiting satellites including high solar-to-electric efficiency, long life without performance degradation, and high power capability. A recent integrated system test of a 2 kilowatt SD power system in a simulated space environment has successfully demonstrated technology readiness for space flight. Conceptual design studies of SD power systems have addressed several potential mission applications: a 10 kilowatt LEO satellite, a low power Space Based Radar, and a 30 kilowatt GEO communications satellite. The studies show that with moderate component development, SD systems can exhibit excellent mass and deployed area characteristics. Using the conceptual design studies as a basis, a SD technology roadmap was generated which identifies the component advances necessary to assure SD systems a competitive advantage for future NASA, DOD, and commercial missions.

Mason, Lee S.↗

Exotic Molecules in Space: A Coordinated Astronomical Laboratory and Theoretical Study

The past three years have been a period of great progress in our laboratory investigation of molecules of astrophysical interest-the most productive by far in the 20-year history of a research program which has led to the discovery of over 20% of the 123 known interstellar and circumstellar molecules. Most of the discoveries made during this period have been the result of the construction in late 1995 and early 1996 of a Fourier transform microwave spectrometer working in the centimeter-wave band. The sensitivity of this instrument from the moment that it was turned on has exceeded our expectations by an order of magnitude. The Table below shows the 46 new molecules which have been discovered. Most are carbon chains, the dominant type of molecule which has been found in space. Several comments with respect to these molecules should be made: 1. There are probably no mistakes in any of the identifications, since these have been confirmed by the standard, powerful assays and tests used to check spectroscopic identifications: isotopic substitution, quantum calculations of the expected molecular structures, detection of hyperfine structure, Zeeman effect, etc. 2. The radio laboratory astrophysics of the entire set is complete for the time being, in the sense that essentially all the astronomically interesting radio transitions (including hfs when present) are either directly measured or can now be calculated from the derived spectroscopic constants to better than 1 part per million (or 0.3 km s-1 in radial velocity, and often much better than that). 3. Six of the forty six new molecules have already been identified in space, in every case but one on the basis of our laboratory measurements. 4. Sensitive as they are, our laboratory techniques are far from fundamental limits on sensitivity, and 5. One of the principal motivations of our research is to close the fairly small mass and size gap, now only a factor of a few, between the smallest postulated interstellar grains and the largest identified interstellar molecules.

Thaddeus, Patrick↗

Nonlinear Shock Acceleration and Photon Emission in Supernova Remnants

We have extended a simple model of nonlinear diffusive shock acceleration (Berezhko & Ellison 1999: Ellison &, Berezhko 1999a) to include the injection and acceleration of electrons and the production of photons from bremsstrahlung, synchrotron, inverse Compton, and pion-decay processes. We argue that, the results of this model, which is simpler to use than more elaborate ones, offer a significant improvement, over test-particle, power-law spectra which are often used in astrophysical applications of diffusive shock acceleration. With an evolutionary supernova remnant (SNR) model to obtain shock parameters as functions of ambient interstellar medium parameters and time, we predict broad-band continuum photon emission from supernova remnants in general, and SN1006 in particular, showing that our results compare well with the more complete time-dependent and spherically symmetric nonlinear model of Berezhko, Ksenofontov, & Petukhov (1999a). We discuss the implications nonlinear shock acceleration has for X-ray line emission, and use our model to describe how ambient conditions determine the TeV/radio flux ratio, an important parameter for gamma-ray observations of radio SNRs.

Ellison, Donald C.↗