Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Magnetization dynamics and interface studies in ion-beam sputtered Si/CoFeB(8)/MgO(4)/CoFeB(8)/Ta(5) structures

The interface roughness, Boron distribution in bulk CoFeB and at interface, Gilbert damping constant (α), and inhomogeneous broadening in ion-beam sputtered Si/CoFeB(8)/MgO(4)/CoFeB(8)/Ta(5) structures are found to be sensitive to the MgO growth process. The ion-assist and reactive growth processes that result in sharper interfaces of width ∼0.5 nm lead to smaller α of 0.0050 ± 0.0003 and 0.0060 ± 0.0002 and inhomogeneous broadening ΔH{sub 0} of 3 ± 0.3 and 1 ± 0.3 Oe, respectively. On the other hand, the post-oxidation method results in rough interface and higher retention of Boron in CoFeB leading to higher values for α and ΔH{sub 0} as 0.0080 ± 0.0006 and 5 ± 0.3 Oe, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid sintering of TiO{sub 2} photoelectrodes using intense pulsed white light for flexible dye-sensitized solar cells

Intense pulsed white light (IPWL) sintering was carried out at room temperature, which is suitable dye-sensitized solar cells (DSSCs) fabrication process on plastic substrates for the mass production. Five seconds irradiation of IPWL on TiO{sub 2} electrode significantly improves the photocurrent density and power conversion efficiency of DSSCs by more than 110% and 115%, respectively, compared to the DSSCs without IPWL treatment. These improvements were mainly attributed to the enhanced interconnection between the TiO{sub 2} nanoparticles induced by IPWL illumination, which is confirmed by the impedance spectra analysis.

36 MATERIALS SCIENCE↗

Synthesis of dense nano cobalt-hydroxyapatite by modified electroless deposition technique

Cobalt-hydroxyapatite (Co-HA) composites was successfully prepared by simple electroless deposition process of Co on the surface of hydroxyapatite (HA) particles. Co deposition was carried out in an alkaline bath with sodium hypophosphite as a reducing agent. The electroless process was carried out without sensitization and activation steps. The deposition of Co onto HA was characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The Co-HA composite powder was compacted and sintered at 1250°C. The Co particles were homogeneously dispersed in the HA matrix after sintering and the mechanical properties of composites was enhanced to 100 % with 3 % wt Co and gradually decreased at higher Co content.

36 MATERIALS SCIENCE↗

Advanced Autonomous Welding for Refabrication and Follow-On Testing of Previously Irradiated Nuclear Fuel

The performance of follow-on experiments using irradiated nuclear fuel at any point in its lifecycle is a critical step in understanding phenomena and behavior. Transient experiments with high-burnup fuel can deepen the understanding of fuel fragmentation, relocations, and dispersal under loss-of-coolant accidents. An advanced autonomous welding process to refabricate commercial fuel rods inside a hot cell was created and tested to enable flexible experiment approaches on fuels irradiated in commercial and test reactors. Irradiated light water reactor fuel test pins from experiments performed at the Advanced Test Reactor (ATR) at Idaho National Laboratory were used to demonstrate the refabrication process. The welding process was found to be sensitive to welding parameters but flexible such that multiple passes could be performed on the same location until a hermetic weld was obtained. The refabrication of rodlets and successful welds was also found to be sensitive to the preparation of the irradiated cladding and endcaps. Thorough defueling of the fuel at the weld location and proper sizing of the endcaps and backing material mitigated these issues. The use of strategically located heat sinks in contact with the cladding and endcap materials also increased welding and refabrication success. For this work, the test pins were sectioned to remove the original endcaps and fuel was removed from both ends of each rodlet. The reassembly of the rodlets was then completed in four steps, which included the press fitting of new endcaps, the circumferential welding of rodlet endcaps to the cladding, rodlet pressurization in a pressure chamber, and seal welding the rodlet under pressure. The integrity of the refabricated rodlets was then verified via helium leak checking inside a vacuum chamber. The advanced welding system is capable of refabricating rodlets up to 380 mm in length, and repressurizing them up to 15 500 kPa. The refabricated lengths of the rodlets used in this work ranged from 149 to 165 mm and the refabricated fuel stack heights ranged from 70.4 to 79.8 mm. Here, the rodlets were pressurized with argon to an average pressure of 3617 kPa, and the average leak rate after refabrication was 6.7 • 10 -8 cm 3 • s -1 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

POPULATION STUDY FOR {gamma}-RAY PULSARS WITH THE OUTER GAP MODEL

Inspired by the increase of the population of {gamma}-ray emitting pulsars by the Fermi telescope, we perform a population study for {gamma}-ray emitting canonical pulsars. We use a Monte Carlo technique to simulate the Galactic population of neutron stars and the radio pulsars. For each simulated neutron star, we consider the {gamma}-ray emission from the outer gap accelerator in the magnetosphere. In our outer gap model, we apply the gap closure mechanism proposed by Takata et al., in which both photon-photon pair-creation and magnetic pair-creation processes are considered. Simulating the sensitivities of previous major radio surveys, our simulation predicts that there are {approx}18-23 radio-loud and {approx}26-34 {gamma}-ray-selected {gamma}-ray pulsars, which can be detected with a {gamma}-ray flux F{sub {gamma}} {>=} 10{sup -10} erg cm{sup -2} s{sup -1}. Applying the sensitivity of the six month observation of the Fermi telescope, 40-61 radio-selected and 36-75 {gamma}-ray selected pulsars are detected within our simulation. We show that the distributions of various pulsar parameters for the simulated {gamma}-ray pulsars can be consistent with the observed distribution of the {gamma}-ray pulsars detected by the Fermi telescope. We also predict that {approx}64 radio-loud and {approx}340 {gamma}-ray-selected pulsars irradiate the Earth with a flux F{sub {gamma}} {>=} 10{sup -11} erg cm{sup -2} s{sup -1}, and most of those {gamma}-ray pulsars are distributed with a distance greater than 1 kpc and a flux F{sub {gamma}} {approx} 10{sup -11} erg cm{sup -2} s{sup -1}. The ratio between the radio-selected and {gamma}-ray-selected pulsars depends on the sensitivity of the radio surveys. We also discuss the Galactic distribution of the unidentified Fermi sources and the canonical {gamma}-ray pulsars.

79 ASTRONOMY AND ASTROPHYSICS↗

THE MASS-METALLICITY RELATION WITH THE DIRECT METHOD ON STACKED SPECTRA OF SDSS GALAXIES

The relation between galaxy stellar mass and gas-phase metallicity is a sensitive diagnostic of the main processes that drive galaxy evolution, namely cosmological gas inflow, metal production in stars, and gas outflow via galactic winds. We employed the direct method to measure the metallicities of {approx}200,000 star-forming galaxies from the Sloan Digital Sky Survey that were stacked in bins of (1) stellar mass and (2) both stellar mass and star formation rate (SFR) to significantly enhance the signal-to-noise ratio of the weak [O III] {lambda}4363 and [O II] {lambda}{lambda}7320, 7330 auroral lines required to apply the direct method. These metallicity measurements span three decades in stellar mass from log(M{sub *}/M{sub Sun }) = 7.4-10.5, which allows the direct method mass-metallicity relation to simultaneously capture the high-mass turnover and extend a full decade lower in mass than previous studies that employed more uncertain strong line methods. The direct method mass-metallicity relation rises steeply at low mass (O/H {proportional_to} M{sub *} {sup 1/2}) until it turns over at log(M{sub *}/M{sub Sun }) = 8.9 and asymptotes to 12 + log(O/H) = 8.8 at high mass. The direct method mass-metallicity relation has a steeper slope, a lower turnover mass, and a factor of two to three greater dependence on SFR than strong line mass-metallicity relations. Furthermore, the SFR-dependence appears monotonic with stellar mass, unlike strong line mass-metallicity relations. We also measure the N/O abundance ratio, an important tracer of star formation history, and find the clear signature of primary and secondary nitrogen enrichment. N/O correlates tightly with oxygen abundance, and even more so with stellar mass.

79 ASTRONOMY AND ASTROPHYSICS↗

Study of synchronous RF pulsing in dual frequency capacitively coupled plasma

Low-pressure multi-frequency capacitively coupled plasmas (CCPs) are used for numerous etch and deposition applications in the semiconductor industry. Pulsing of the radio-frequency (RF) sources enables control of neutral and charged species in the plasma on a millisecond timescale. The synchronous (i.e. simultaneous, in-phase) pulsing of both power sources in a dual frequency CCP is examined in this article. Due to the low gas pressure, modeling has been done using the electrostatic particle-in-cell/Monte Carlo collision method. Here, the objective of this work is to investigate the sensitivity of the plasma properties to small changes in timing during synchronous pulsing of the two RF sources. It is demonstrated that small deviations in the on and off times of the two RF sources can lead to major changes in the plasma characteristics. This high sensitivity is of concern for process repeatability but can be utilized to enable better control of the dynamics of plasma-surface interaction. In the simulations, the pulsing parameters (on and off times and ramp rates) are varied and the temporal evolution of plasma characteristics such as electron density (n e ), species current at the electrode, and electron temperature are examined. It is demonstrated that if the low-frequency (LF) source is turned off a few μs before (or after) the high-frequency source, n e during the off-state is significantly higher (or lower) due to the frequency coupling effect. Similarly, turning on the LF source with a small delay results in a sharp increase in the plasma density when the RF sources are turned on.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Satellites, core hole excitations, and spin-resolved electronic structure in the spectroscopy of half-metallic CrO 2

Photoelectron satellites—the structures appearing on the low kinetic or high binding-energy side of the “main” or “elastic” photopeak—betray the complex many-body interactions set in motion by the sudden creation of the core hole. In this work, we demonstrate, using the technologically important ferromagnetic half-metal CrO 2 , how such satellites can manifest themselves in other core-level spectroscopies of the material and how they can reveal important details pertinent to its electronic structure. Specifically, we identify a fluorescence satellite in the Cr 𝐿 3 resonant x-ray-emission spectra that radiates at a constant emission energy across the Cr 𝐿 3 x-ray edge with energy ≈1.3 eV above the ordinary valence fluorescence. Here, we provide evidence that this feature arises from the valence recombination of the Cr 2⁢𝑝 core hole “dressed” by the same shakeup charge-transfer process present in both the Cr x-ray photoelectron and the Cr x-ray absorption spectra with its energy uniquely measuring the exchange splitting of the Cr 3⁢𝑑 level. Further analysis of the x-ray emission data reveals three additional features that radiate at constant loss energy that are attributed to combinations of Cr 3⁢𝑑⁢(𝑡 2⁢𝑔 ) → Cr 3⁢𝑑⁢(𝑡 2⁢𝑔 ), charge-transfer O 2⁢𝑝→Cr 3⁢𝑑, and crystal-field Cr⁢ 3⁢𝑑⁡(𝑡 2⁢𝑔 )→Cr⁢ 3⁢𝑑⁡(𝑒 𝑔 ) excitations. These assignments and their energies are supported by density-functional theory calculations, the accuracy of which we demonstrate by hard x-ray valence-photoemission measurements. Atomic multiplet calculations, which include crystal-field effects, help interpret x-ray photoelectron and x-ray absorption spectra of the covalently mixed Cr ion. Resonant Cr K-𝐿 2,3 ⁢𝐿 2,3 Auger-electron emission spectra support a ligand-to-metal nature of the charge-transfer process while highlighting the charge sensitivity differences between photon-in/electron-out and photon-in/photon-out spectroscopies.

36 MATERIALS SCIENCE↗

Anomalous thermal effect in Zr Te 5 observed via photothermal measurements

In this study, we explore the magneto-thermoelectric power (MTP) of $ZrTe$ 5 , a canonical Dirac semimetal, through a novel photothermal technique. Unlike conventional thermoelectric studies that rely on on-chip heaters and are limited by fabrication processes, especially for stress-sensitive materials, our approach utilizes photothermal effects to induce temperature gradients. Our experiments, applying a magnetic field approximately parallel and transverse to the photocurrent detection direction, reveal that the photothermal method efficiently and reliably extracts both diagonal and off-diagonal components of the thermoelectric coefficient of $ZrTe$ 5 . Here, we observe that the longitudinal MTP reproduces features previously reported in thermal transport studies, while the photoinduced transverse MTP confirms the anomalous Nernst effect. This photothermal measurement technique opens new avenues for investigating transport properties in a wide range of quantum materials, both in 3D and 2D systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of uncertainties in reaction Q values on nucleosynthesis in type I x-ray bursts

Nucleosynthesis in type I X-ray bursts may involve up to several thousand nuclear processes. The majority of these processes have only been determined theoretically due to the lack of sufficient experimental information. Accurate reaction Q-values are essential for reliable theoretical estimates of reaction rates. Those reactions with small Q-values (<1 MeV) are of particular interest in these environments as they may represent waiting points for a continuous abundance flow toward heavier-mass nuclei. To explore the nature of these waiting points, we have performed a comprehensive series of post-processing calculations which examine the sensitivity of nucleosynthesis in type I X-ray bursts to uncertainties in reaction Q-values. We discuss and list the relatively few critical masses for which measurements could better constrain the results of our studies. In particular, we stress the importance of measuring the mass of {sup 65}As to obtain an experimental Q-value for the {sup 64}Ge(p,{gamma}){sup 65}As reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental Test of the Ratio Method for Nuclear-Reaction Analysis

Nuclear halos are exotic quantal structures observed far from stability. They are mostly studied through reactions. The ratio of angular cross sections for breakup and scattering is predicted to be independent of the reaction process and to be very sensitive to the halo structure. Here, we test this new observable experimentally for the first time on the collision of 11 Be on C at 22.8 MeV/nucleon and using existing data on Pb at 19.1 MeV/nucleon. The theoretical predictions are verified, which offers the possibility of developing a new spectroscopic tool to study nuclear structure far from stability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New physics at a Super Flavor Factory

The potential of a Super Flavor Factory (SFF) for searches of new physics is reviewed. While very high luminosity B physics is assumed to be at the core of the program, its scope for extensive charm and {tau} studies are also emphasized. The possibility to run at the {Upsilon}(5S) is also discussed; in principle, this could provide very clean measurements of B{sub s} decays. The strength and reach of a SFF are most notably due to the possibility of examining an impressive array of very clean observables. The angles and the sides of the unitarity triangle can be determined with unprecedented accuracy. These serve as a reference for new physics (NP) sensitive decays such as B{sup +}{yields}{tau}{sup +}{nu}{sub {tau}} and penguin dominated hadronic decay modes, providing tests of generic NP scenarios with an accuracy of a few percent. Besides very precise studies of direct and time dependent CP asymmetries in radiative B decays and forward-backward asymmetry studies in B{yields}X{sub s}l{sup +}l{sup -} and numerous null tests using B, charm, and {tau} decays are also likely to provide powerful insights into NP. The dramatic increase in luminosity at a SFF will also open up entirely new avenues for probing NP observables, e.g., by allowing sensitive studies using theoretically clean processes such as B{yields}X{sub s}{nu}{nu}. The SFF is envisioned to be a crucial tool for essential studies of flavor in the CERN Large Hadron Collider era and will extend the reach of the Large Hadron Collider in many important ways.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

WE-D-BRE-02: BEST IN PHYSICS (THERAPY) - Radiogenomic Modeling of Normal Tissue Toxicities in Prostate Cancer Patients Receiving Hypofractionated Radiotherapy

Purpose: It has been realized that inter-patient radiation sensitivity variability is a multifactorial process involving dosimetric, clinical, and genetic factors. Therefore, we explore a new framework to integrate physical, clinical, and biological data denoted as radiogenomic modeling. In demonstrating the feasibility of this work, we investigate the association of genetic variants (copy number variations [CNVs] and single nucleotide polymorphisms [SNPs]) with radiation induced rectal bleeding (RB) and erectile dysfunction (ED) while taking into account dosimetric and clinical variables in prostate cancer patients treated with curative irradiation. Methods: A cohort of 62 prostate cancer patients who underwent hypofractionated radiotherapy (66 Gy in 22 fractions) was retrospectively genotyped for CNV and SNP rs25489 in the xrcc1 DNA repair gene. Dosevolume metrics were extracted from treatment plans of 54 patients who had complete dosimetric profiles. Treatment outcomes were considered to be a Result of functional mapping of radiogenomic input variables according to a logit transformation. Model orders were estimated using resampling by leave-one out cross-validation (LOO-CV). Radiogenomic model performance was evaluated using area under the ROC curve (AUC) and LOO-CV. For continuous univariate dosimetric and clinical variables, Spearmans rank coefficients were calculated and p-values reported accordingly. In the case of binary variables, Chi-squared statistics and contingency table calculations were used. Results: Ten patients were found to have three copies of xrcc1 CNV (RB: χ2=14.6 [p<0.001] and ED: χ2=4.88[p=0.0272]) and twelve had heterozygous rs25489 SNP (RB: χ2=0.278[p=0.599] and ED: χ2=0.112[p=0.732]). LOO-CV identified penile bulb D60 as the only significant QUANTEC predictor (rs=0.312 [p=0.0145]) for ED. Radiogenomic modeling yielded statistically significant, cross-validated NTCP models for RB (rs=0.243[p=0.0443], AUC=0.665) and ED (rs=0.276[p=0.0217], AUC=0.754). Conclusion: The radiogenomic modeling approach presented herein has been shown to identify NTCP models which have increased predictive power. Furthermore, CNVs appears to be useful genetic variants when added to dosimetric NTCP models. This work was partially supported by CIHR grant MOP-114910.

60 APPLIED LIFE SCIENCES↗

Engineering Corynebacterium glutamicum to produce the biogasoline isopentenol from plant biomass hydrolysates

Abstract Background Many microbes used for the rapid discovery and development of metabolic pathways have sensitivities to final products and process reagents. Isopentenol (3-methyl-3-buten-1-ol), a biogasoline candidate, has an established heterologous gene pathway but is toxic to several microbial hosts. Reagents used in the pretreatment of plant biomass, such as ionic liquids, also inhibit growth of many host strains. We explored the use of Corynebacterium glutamicum as an alternative host to address these constraints. Results We found C. glutamicum ATCC 13032 to be tolerant to both the final product, isopentenol, as well to three classes of ionic liquids. A heterologous mevalonate-based isopentenol pathway was engineered in C. glutamicum . Targeted proteomics for the heterologous pathway proteins indicated that the 3-hydroxy-3-methylglutaryl-coenzyme A reductase protein, HmgR, is a potential rate-limiting enzyme in this synthetic pathway. Isopentenol titers were improved from undetectable to 1.25 g/L by combining three approaches: media optimization; substitution of an NADH-dependent HmgR homolog from Silicibacter pomeroyi ; and development of a C. glutamicum ∆poxB ∆ldhA host chassis. Conclusions We describe the successful expression of a heterologous mevalonate-based pathway in the Gram-positive industrial microorganism, C. glutamicum, for the production of the biogasoline candidate, isopentenol. We identified critical genetic factors to harness the isopentenol pathway in C. glutamicum . Further media and cultivation optimization enabled isopentenol production from sorghum biomass hydrolysates.

09 BIOMASS FUELS↗

Spectral induced polarization signatures of abiotic FeS precipitation

In recent years, geophysical methods have been shown to be sensitive to microbial induced mineralization processes. The spectral induced polarization (SIP) method appears to be very promising for monitoring mineralization and microbial processes. With this work, we study the links of mineralization and SIP signals, in the absence of microbial activity. We recorded the SIP response during abiotic FeS precipitation. We show that the SIP signals are diagnostic of FeS mineralization and can be differentiated from SIP signals from bio-mineralization processes. More specifically the imaginary conductivity shows almost linear dependence on the amount of FeS precipitating out of solution, above the threshold value 0.006 gr under our experimental conditions. This research has direct implications for the use of the SIP method as a monitoring, and decision making, tool for sustainable remediation of metals in contaminated soils and groundwater.

54 ENVIRONMENTAL SCIENCES↗

Data for A Consolidated Bioprocess Design to Produce Multiple High-Value Platform Chemicals from Lignocellulosic Biomass and Its Technoeconomic Feasibility

5-hydroxymethyl furfural (HMF) and furfurals are DOE-listed platform chemicals that can be derived from the renewable carbon in the lignocellulosic biomasses and have the potential to replace petroleum-derived alternatives. High substrate cost and use of expensive solvents limit the economic feasibility of bio-based HMF production on an industrially relevant scale. The study presents an experimental optimized condition that maximizes the chemical-free production of HMF and furfurals without lowering the yield of total fermentable sugars from Saccharum bagasse. Hydrothermal pretreatment at 210 °C for 15 min yielded approximately 10%, 12%, and 46% of HMF, furfurals, and fermentable sugars per gram of dry biomass, respectively. Additionally, the study proposes a consolidated bioprocess model to produce and recover four high-value bioproducts i.e., HMF, furfurals, ethanol, and acetic acid based on the experimental results and evaluates its technoeconomic feasibility considering HMF as the main product. The minimum selling price (MSP) of HMF was estimated to be 930.6 USD/t which is competitive with its petroleum-derived precursor alternative p-xylene (1,113 USD/t). The sensitivity analysis performed for the process parameters suggests that pretreatment cost and revenues from coproducts immensely influence the MSP of HMF. The preliminary technoeconomic analysis performed on the consolidated bioprocess design indicates that additional revenue streams from diversified coproducts in biorefineries aid in lowering the MSP of high-value bioproducts.

Conversion↗

Rapid estimation of photosynthetic leaf traits of tropical plants in diverse environmental conditions using reflectance spectroscopy

Tropical forests are one of the main carbon sinks on Earth, but the magnitude of CO 2 absorbed by tropical vegetation remains uncertain. Terrestrial biosphere models (TBMs) are commonly used to estimate the CO 2 absorbed by forests, but their performance is highly sensitive to the parameterization of processes that control leaf-level CO 2 exchange. Direct measurements of leaf respiratory and photosynthetic traits that determine vegetation CO 2 fluxes are critical, but traditional approaches are time-consuming. Reflectance spectroscopy can be a viable alternative for the estimation of these traits and, because data collection is markedly quicker than traditional gas exchange, the approach can enable the rapid assembly of large datasets. However, the application of spectroscopy to estimate photosynthetic traits across a wide range of tropical species, leaf ages and light environments has not been extensively studied. Here, we used leaf reflectance spectroscopy together with partial least-squares regression (PLSR) modeling to estimate leaf respiration ( R dark25 ), the maximum rate of carboxylation by the enzyme Rubisco ( V cmax25 ), the maximum rate of electron transport ( J max25 ), and the triose phosphate utilization rate ( T p25 ), all normalized to 25°C. We collected data from three tropical forest sites and included leaves from fifty-three species sampled at different leaf phenological stages and different leaf light environments. Our resulting spectra-trait models validated on randomly sampled data showed good predictive performance for V cmax25 , J max25 , T p25 and R dark25 (RMSE of 13, 20, 1.5 and 0.3 μmol m -2 s -1 , and R 2 of 0.74, 0.73, 0.64 and 0.58, respectively). The models showed similar performance when applied to leaves of species not included in the training dataset, illustrating that the approach is robust for capturing the main axes of trait variation in tropical species. We discuss the utility of the spectra-trait and traditional gas exchange approaches for enhancing tropical plant trait studies and improving the parameterization of TBMs.

54 ENVIRONMENTAL SCIENCES↗

A Study of QCD Radiation in VBF Higgs Production with Vincia and Pythia

We discuss and illustrate the properties of several parton-shower algorithms available in Pythia and Vincia, in the context of Higgs production via vector boson fusion (VBF). In particular, the distinctive colour topology of VBF processes allows to define observables sensitive to the coherent radiation pattern of additional jets. We study a set of such observables, using the Vincia sector-antenna shower as our main reference, and contrast it to Pythia's transverse-momentum-ordered DGLAP shower as well as Pythia's dipole-improved shower. We then investigate the robustness of these predictions as successive levels of higher-order perturbative matrix elements are incorporated, including next-to-leading-order matched and tree-level merged calculations, using Powheg Box and Sherpa respectively to generate the hard events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗