Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Mechanism of Formation of Li 7 P 3 S 11 Solid Electrolytes through Liquid Phase Synthesis

Crystalline Li7P3S11 is a promising solid electrolyte for all solid state lithium/lithium ion batteries. A controllable liquid phase synthesis of Li7P3S11 is more desirable compared to conventional mechanochemical synthesis, but recent attempts suffer from reduced ionic conductivities. Here we elucidate the formation mechanism of crystalline Li7P3S11 synthesized in the liquid phase (acetonitrile, or ACN). We conclude that the crystalline Li7P3S11 forms through a two-step reaction: 1) formation of solid Li3PS4∙ACN and amorphous Li2S∙P2S5 phases in the liquid phase; 2) solid-state conversion of the two phases. The implication of this two-step reaction mechanism to the morphology control and the transport properties of liquid phase synthesized Li7P3S11 is identified and discussed.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2018

Crystal Structures, Local Atomic Environments, and Ion Diffusion Mechanisms of Scandium-Substituted Sodium Superionic Conductor (NASICON) Solid Electrolytes

The importance of exploring new solid electrolytes for all-solid-state batteries has led to significant interest in NASICON-type materials. In this work, the Sc 3+ -substituted NASICON compositions Na 3 Sc x Zr 2– x (SiO 4 ) 2- x (PO 4 ) 1+ x (termed N3) and Na 2 Sc y Zr 2- y (SiO 4 ) 1- y (PO 4 ) 2+ y (termed N2) ( x , y = 0–1) are studied as model Na + -ion conducting electrolytes for solid-state batteries. The influence of Sc 3+ substitution on the crystal structures and local atomic environments has been characterized by powder X-ray diffraction (XRD) and neutron powder diffraction (NPD), as well as solid-state 23 Na, 31 P, and 29 Si nuclear magnetic resonance (NMR) spectroscopy. A phase transition between 295 and 473 K from monoclinic C 2/ c to rhombohedral $R\bar{3}c$ is observed for the N3 compositions, while N2 compositions crystallize in a rhombohedral $R\bar{3}c$ unit cell in this temperature range. Alternating current (AC) impedance spectroscopy, molecular dynamics (MD), and high temperature 23 Na NMR studies are in good agreement, showing that, with a higher Sc 3+ concentration, the ionic conductivity (of about 10 -4 S/cm at 473 K) decreases and the activation energy for ion diffusion increases. 23 Na NMR experiments indicate that the nature of the Na + -ion motion is two-dimensional on the local atomic scale of NMR although the long-range diffusion pathways are three-dimensional. In addition, a combination of MD, bond valence, maximum entropy/Rietveld, and van Hove correlation methods has been used to reveal that the Na + -ion diffusion in these NASICON materials is three-dimensional and that there is a continuous exchange of sodium ions between Na(1) and Na(2) sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Reaction Kinetic Model of Dilute Acid-Catalyzed Hemicellulose Hydrolysis of Corn Stover under High-Solid Conditions

High solid conditions are desirable in pretreatment of lignocellulosic biomass. An advanced dilute-acid pretreatment reactor has been developed at National Renewable Energy Laboratory (NREL). It is a continuous auger-driven reactor that can be operated with high-solid charge at high temperature and with short residence time resulting high productivity and high sugar concentration. Here, we investigated the kinetics of the reactions associated with dilute-acid pretreatment of corn stover, covering the reaction conditions of the NREL reactor operation: 155-185 C, 1-2 wt% sulfuric acid concentration, and 1:2 solid to liquid ratio. The experimental data were fitted to a first-order biphasic model which assumes that xylan is comprised of two different fragments: fast and slow reacting fractions. Due to the high solid loading condition, significant amount of xylose oligomers was observed during the pretreatment. We also included the oligomers as an intermediate entity in the kinetic model. The effect of acid concentration was incorporated into the pre-exponential factor of Arrhenius equation. The kinetic model with bestfit kinetic parameters has shown good agreement with experimental data. The kinetic parameter values of the proposed model were noticeably different from those previously reported. The activation energies of xylan hydrolysis are lower and the acid exponents are higher than the average of literature values. The proposed model can serve as a useful tool for design and operation of pretreatment system pertaining to corn stover.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of Local Structural Distortions on Antiferroelectric–Ferroelectric Phase Transition in Dilute Solid Solutions of K x Na 1– x NbO 3

The fundamental principles that govern antiferroelectric (AFE)–ferroelectric (FE) transitions are not well understood for many solid solutions of perovskite compounds. For example, crystal chemical considerations based on the average Goldschmidt tolerance factor or ionic polarizability do not precisely predict the boundary between the AFE and FE phases in dilute solid solutions of alkali niobates, such as K x Na 1– x NbO 3 ( x ≤ 0.02). Here, based on detailed structural analysis from neutron total scattering experiments, we provide insights about how the relative local distortions around the A- and B-sites of the ABO 3 perovskite structure affect the AFE/FE order of the average crystallographic phases in K x Na 1– x NbO 3 . Specifically, we show that a higher (lower) ratio of B-site-centered distortions over A-site-centered distortions drives transition toward a long-range FE (AFE) phase, which is based on a competition between the long-range polarizing field of the Nb–O dipoles and the disordering effect of local distortions around the A-site. Our study provides a predictive tool for designing complex solid-solution perovskites with tunable (anti)ferroelectric polarization properties, which can be of interest for various energy-related applications such as high-density energy storage and solid-state cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Method for Obtaining Liquid–Solid Adsorption Rates from Molecular Dynamics Simulations: Applied to Methanol on Pt(111) in H 2 O

Adsorption is an important step in heterogeneous catalysis as it predetermines how many reactant molecules can participate in a surface reaction per unit time. While the rate of adsorption processes is well studied in gas–solid adsorption in both theory and experiment, such rates are still not well studied for liquid–solid adsorption. This is partly because the ever-changing configurations of liquid-phase solvent molecules impede the ability to study a molecule approaching a surface from a liquid phase by either experiment or theory. In this work, we develop a method using molecular dynamics (MD) simulations to study the rate of adsorption in liquid–solid adsorption processes. Specifically, we use MD to model the diffusion of a methanol molecule in aqueous solvent and its adsorption to a Pt(111) surface. We find that by approximating the solute motion as following the same displacement rates as a random walk model, the adsorbed and non-adsorbed states of the methanol molecule near the Pt(111) surface can be discerned and quantified. In particular, this methodology enables extracting a sticking coefficient and a macroscopically relatable adsorption rate. This method can be applied to arbitrary types of reactants and surfaces, as well as different liquid environments, thus providing a general tool for predicting quantitative adsorption rates of liquid–solid adsorption systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Enhancing the Sensitivity of Solid-State NMR Experiments with Very Low Gyromagnetic Ratio Nuclei with Fast Magic Angle Spinning and Proton Detection

Many transition metals commonly encountered in inorganic materials and organometallic compounds possess NMR-active nuclei with very low gyromagnetic ratios (γ) such as 89 Y, 103 Rh, 109 Ag, and 183 W. A low-γ leads to poor NMR sensitivity and other experimental challenges. Consequently, nuclei with low-γ are often impossible to study with conventional solid-state NMR methods. In this paper, we combine fast magic angle spinning (MAS) and proton detection to enhance the sensitivity of solid-state NMR experiments with very low-γ nuclei by 1–2 orders of magnitude. Coherence transfer between 1 H and low-γ nuclei was performed with low-power double quantum (DQ) or zero quantum (ZQ) cross-polarization (CP) or dipolar refocused insensitive nuclei enhanced by polarization transfer (D-RINEPT). Comparison of the absolute sensitivity of CP NMR experiments performed with proton detection with 1.3 mm rotors and direct detection with 4 mm rotors shows that proton detection with a 1.3 mm rotor provides a significant boost in absolute sensitivity, while requiring approximately 1/40 th of the material required to fill a 4 mm rotor. Fast MAS and proton detection were applied to obtain 89 Y and 103 Rh solid-state NMR spectra of organometallic complexes. Finally, these results demonstrate that proton detection and fast MAS represents a general approach to enable and accelerate solid-state NMR experiments with very low-γ nuclei.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Additive Molar Volumes in Amorphous Ca/Sr Carbonate Solid Solutions

The development of predictive models of minor element incorporation in crystalline carbonate end products requires an understanding of the fundamental controls on metastable intermediate phase composition. In this study, we used small-angle X-ray scattering (SAXS), X-ray pair distribution function (PDF), thermogravimetric analysis (TGA), inductively coupled plasma mass spectrometry (ICP-MS), and transmission electron microscopy (TEM) to determine the composition-dependent density of an amorphous calcium–strontium carbonate (ACSC) solid solution. The amorphous calcium carbonate (ACC) and strontium carbonate (ASC) measured densities were ρ ACC = 2.19 ± 0.04 g/cm 3 and ρ ASC = 2.97 ± 0.05 g/cm 3 . Throughout our work, the experiments showed a dependence of the water content of the amorphous solid solution on the Sr mole fraction. An equation that relates the molar volume to the average cation radius, the carbonate ion radius, and the water volume was parameterized for hydrated crystalline carbonates and predicted well the molar volume of the ACSC solid solution. This finding indicates that, as for hydrated crystalline carbonates, the molar volumes of amorphous carbonates are additive and that water is a structural component of ACSC. Ab initio molecular dynamics (AIMD) simulations of the ACSC solid solutions showed strong linear correlations between calculated molar volumes and Sr and H 2 O contents, thus supporting the experimental results. In conclusion, our findings highlight the need to consider the full CaCO 3 –MeCO 3 –H 2 O ternary when quantifying metal cation incorporation in ACC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Computational Study of Short-Pulse Laser-Induced Generation of Crystal Defects in Ni-Based Single-Phase Binary Solid–Solution Alloys

Single-phase concentrated solid–solution alloys exhibit enhanced mechanical characteristics and radiation damage resistance, making them promising candidate materials for applications involving an exposure to rapid localized energy deposition. We use large-scale atomistic modeling to investigate the mechanisms of the generation of vacancies, dislocations, stacking faults, and twin boundaries in Ni, Ni 50 Fe 50 , Ni 80 Fe 20 , and Ni 80 Cr 20 targets irradiated by short laser pulses in the regime of melting and resolidification. The decrease in the thermal conductivity and strengthening of the electron–phonon coupling due to the intrinsic chemical disorder in the solid-solution alloys are found to have important implications on localization of the energy deposition and generation of thermoelastic stresses. The interaction of the laser-induced stress waves with the melting front is found to play a key role in roughening of the crystal–liquid interface and generation of dislocations upon the solidification. A common feature revealed in the structural analysis of all irradiated targets is the presence of high vacancy concentrations exceeding the equilibrium values at the melting temperature by about an order of magnitude. On the basis of the results of molecular dynamics simulations of solidification occurring at fixed levels of undercooling, the generation of vacancies is correlated with the velocity of the solidification front, and the processes responsible for creating the strong vacancy supersaturation are revealed. The suppression of the vacancy generation in the solid–solution alloys is also revealed and related to combined effect of enhanced vacancy mobility and higher energy of the vacancy formation in the alloy systems. The analysis of the first atomic shells surrounding the vacancy sites in Ni–Fe alloys uncovers the preference for the vacancy sites to be surrounded by Fe atoms and suggests that atomic-scale chemical heterogeneities may play an important role in defining the behavior and properties of the single-phase concentrated solid-solution alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tunable Solid Acid Catalyst Thin Films Prepared by Atomic Layer Deposition

Solid acid catalysts, including zeolites and amorphous silica-aluminas (ASAs), are industrially important materials widely used in the fuel and petrochemical industries. The versatility of zeolites is due to the Brønsted acidity of the bridging hydroxyl and shape selectivity that can be tailored during and after synthesis. This is in contrast to amorphous silica-alumina, where tailoring acidity is a major challenge as the Brønsted acid structure in ASA is still debated. In both cases, however, the pore size and acidity cannot be tuned independently, and this is particularly limiting in the application of biomass conversion, where zeolite pores are too small for the molecules of interest. Herein, we present a method using atomic layer deposition (ALD) to prepare thin films of solid acid materials where the ratio of Brønsted to Lewis acid sites can be tuned precisely. This capability, combined with the sub-nm pore size control afforded by ALD yields a powerful and flexible method for synthesizing solid acid catalysts inside virtually any mesoporous host. We demonstrate the utility of these materials in two acid-catalyzed reactions relevant to biomass conversion: (1) Meerwein–Ponndorf–Verley–Oppenauer (MPVO) reaction and dehydration of fructose and (2) cascade reaction of glucose to 5-hydroxymethylfurfural. Finally, we propose a plausible structure for the Brønsted acid sites in our materials based on infrared spectroscopy and solid-state nuclear magnetic resonance measurements and density functional theory calculations and argue that this same structure might apply to conventional ASAs as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facile Strategy to Prepare Poly(ionic liquid)-Coated Solid Polymer Electrolytes through Layer-by-Layer Assembly

The inability of solid polymer electrolytes to preserve strong mechanical strength with high ionic conductivity hinders the commercialization of lithium metal batteries (LMBs). The success of fabricating layer-by-layer (LbL)-assembled electrolytes has realized the application of flexible solid polymer electrolytes in electrochemical devices. Here, we demonstrate a rational strategy to construct solid electrolytes coated with multiple ultrathin layers of polyanions (poly(sodium 4-styrenesulfonate)) and polycations (linear poly(1-butyl-3-(4-vinylbenzyl)-1H-imidazolium chloride) (BVIC)/linear poly(PEG 4 -VIC)/SiO 2 -g-poly(PEG 4 -VIC)) using an LbL assembly method. Poly(ionic liquid) backbones and PEG side groups are employed to facilitate the transport of lithium ions via the segmental motion of the macromolecular matrix. The fabricated free-standing membranes exhibited good ionic conductivities of 9.03–10 × 10 –4 S cm –1 . Furthermore, a Li/LiFePO 4 cell assembled with the LbL-membrane electrolytes exhibits an initial high discharge capacity of 143–158 mAhg –1 at 60 °C with high columbic efficiency. In conclusion, this approach, which combines polymer synthesis and LbL self-assembly, is an effective and facile route to fabricate solid polymer electrolyte membranes with superior ionic conductivity and mechanical robustness, which are useful for electrochemical devices and high-voltage battery applications.

25 ENERGY STORAGE↗
DOE OSTI2016

Fabrication, testing and simulation of all solid state three dimensional Li-ion batteries

Realization of safe, long cycle life and simple to package solid-state rechargeable batteries with high energy and power density has been a long-standing goal of the energy storage community. [1,2] Much of the research activity has been focused on developing new solid electrolytes with high Li ionic conductivity. In addition, LiPON, the only solid electrolyte currently used in commercial thin film solid state Li-ion batteris (SSLIBs), has a conductivity of ~10 -6 S/cm, compared to ~0.01 S/cm typically observed for liquid organic electrolytes [3] .

25 ENERGY STORAGE↗
DOE OSTI2020

High-Energy All-Solid-State Organic–Lithium Batteries Based on Ceramic Electrolytes

Recent studies have identified unique properties of organic battery electrode materials such as moderate redox potentials and mechanical softness which are uniquely beneficial for all-solid-state batteries based on ceramic electrolytes. Here, we further explore the promise of organic materials and demonstrate a sulfide electrolyte- based organic-lithium battery with a specific energy of 828 Wh kg –1 , rivaling the state-of- the-art of all-solid-state batteries. Two innovation steps are responsible for the accomplishment. First, the combination of lithium anode and the high-capacity cathode material pyrene-4,5,9,10-tetraone ensures a high theoretical specific energy. Second, the microstructure of the organic cathode is optimized with the introduction of cryomilling, a technique common to processing soft materials but not familiar to electrode fabrication. The cathode material utilization increases to 99.5% as a result, up from the 55–89% previously reported for ceramic electrolyte-based solid-state organic batteries. In conclusion, the improvement highlights the special requirements of solid-state organic electrodes for microstructural engineering while preserving the chemical integrity of components.

25 ENERGY STORAGE↗
DOE OSTI2023

Lithiation Gradients and Tortuosity Factors in Thick NMC111-Argyrodite Solid-State Cathodes

Achieving high energy density in all-solid-state lithium batteries will require the design of thick cathodes, and these will need to operate reversibly under normal use conditions. We use high-energy depth-profiling X-ray diffraction to measure the localized lithium content of Li 1-x Ni 1/3 Mn 1/3 Co 1/3 O 2 (NMC111) through the thickness of 110 μm thick composite cathodes. The composite cathodes consisted of NMC111 of varying mass loadings mixed with argyrodite solid electrolyte Li 6 PS 5 Cl (LPSC). During cycling at C/10, substantial lithiation gradients developed, and varying the NMC111 loading altered the nature of these gradients. Microstructural analysis and cathode modeling showed this was due to high tortuosities in the cathodes. This was particularly true in the solid electrolyte phase, which experienced a marked increase in tortuosity factor during the initial charge. Our results demonstrate that current distributions are observed in sulfide-based composites and that these will be an important consideration for practical design of all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Elucidating Polymer Binder Entanglement in Freestanding Sulfide Solid-State Electrolyte Membranes

This study advances the development of flexible, sheet-type sulfide solid-state electrolytes (SSEs) for use in all-solid-state batteries, emphasizing the important and previously insufficiently investigated role of polymer binder entanglement. Here, the molecular weight of polymer binders is pivotal in crafting robust, freestanding SSE films. Our research uncovers a dual impact: higher molecular weight binders bolster the structural integrity of SSE films but elevate grain boundary resistance and diminish critical current density, whereas lower molecular weight poly(isobutylene) films, despite their more uniform distribution, lack the essential strain hardening or strength for sustained active material contact. Crucially, full cells employing higher molecular weight binders demonstrate improved discharge capacity retention, contrasting sharply with the notable capacity degradation in lower molecular weight cells. Our findings not only deepen the comprehension of binder influences in solid-state batteries but also chart a course for refining all-solid-state battery technologies, a key stride for the future of energy storage solutions.

25 ENERGY STORAGE↗
DOE OSTI2026

Pressure Heterogeneity and Material Utilization in Thin-Film Solid-State Cathodes

Intimate interfacial contact between the solid electrolyte and the cathode active material is critical for maximizing cathode utilization in solid-state batteries. However, volume changes during electrochemical cycling induce internal stresses that drive interfacial degradation, particularly under nonuniform stack pressure. In this study, we employ in situ energy-dispersive X-ray diffraction tomography to visualize and quantify reaction heterogeneities across a 3 mm-diameter solid-state cathode with a well-defined interface. Our results reveal that regions under a lower stack pressure exhibit reduced material utilization and reversibility, which negatively affect the high-pressure regions. Interfacial degradation further impedes lithium-ion transport and amplifies microscale reaction heterogeneity. These findings highlight the critical role of stack pressure distribution in governing interfacial stability and electrochemical performance, offering important design insights into practical solid-state battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Solid-State Chemistries Stable with High-Energy Cathodes for Lithium-Ion Batteries

In the pursuit of higher-energy-density lithium-ion batteries, one big challenge is the stability of high-capacity or high-voltage cathodes with electrolytes. An understanding of how different chemistries interact with high-energy cathodes is required to enable the rational design of coatings or solid electrolyte materials that offer long-term stability with the cathode. Herein, we systematically evaluated the thermodynamic stability among a broad range of solid-state chemistries with common cathodes. Our thermodynamic analyses confirmed that the strong reactivity of lithiated and delithiated cathodes greatly limits the possible choice of materials that are stable with the cathode under voltage cycling. Our computation reaffirmed previously demonstrated coating and solid electrolyte chemistries and suggested several new stable chemistries. In particular, the lithium phosphates and lithium ternary fluorides, which have high oxidation limits, are promising solid-state chemistries stable with high-voltage cathodes. Our research offers guiding principles for selecting materials with long-term stability with high-energy cathodes for next-generation lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Comparative Analysis of Reactivity of Al and Ga Doped Garnet Solid State Electrolyte at the Interface with Li Metal

Lithium garnet (Li 7 La 3 Zr 2 O 12 , LLZO) based solid electrolytes are leading candidate materials for all-solid-state batteries with lithium metal anodes because of their high ionic conductivity, high mechanical toughness, and superior electrochemical stability. While doping LLZO with Al and Ga increases its ionic conductivity by stabilizing the cubic phase, the impact of dopants on its (electro)chemical stability at the interfaces with Li metal is critical. Here, our study of differences between Al- and Ga-doped LLZO when interfaced with lithium metal using X-ray photoelectron spectroscopy and density functional theory shows a higher propensity of Ga to move across LLZO interface with Li metal and form Ga-Li alloy. Additionally, neutron diffraction reveals loss of cubic phase resulting from the loss of dopant that explains electrochemical behavior differences between Ga- and Al-doped LLZO. Overall, our study reveals the key role of dopant chemistry in enabling stable solid electrolyte materials for all-solid-state batteries.

Klenk, Matthew↗
DOE OSTI2023

Atomistic Origins of Reversible Noncatalytic Gas–Solid Interfacial Reactions

Noncatalytic gas-solid reactions are a large group of heterogeneous reactions that are usually assumed to occur irreversibly because of the strong driving force to favor the forward direction toward the product formation. Using the example of Ni oxidation into NiO with CO 2 , herein we demonstrate the existence of the reverse element that results in the NiO reduction from the countering effect of the gaseous product of CO. Using in-situ electron microscopy observations and atomistic modeling, we show that the oxidation process occurs via preferential CO 2 adsorption along step edges that results in step-flow growth of NiO layers, and the presence of Ni atoms on the flat NiO surface promotes the nucleation of NiO layers. Simultaneously, the NiO reduction happens via preferential step-edge adsorption of CO that leads to the receding motion of atomic steps, and the presence of Ni vacancies in the NiO surface facilitates the CO adsorption induced surface pitting. Based on the in-situ TEM observations, temperature and CO 2 pressure effect maps are constructed to illustrate the spatiotemporal dynamics of the competing NiO redox reactions. We report, these results demonstrate the rich gas-solid surface reaction dynamics induced by the co-existing forward and reverse reaction elements and have practical applicability in manipulating gas-solid reactions via controlling the gas environment or atomic structure of the solid surface to steer the reaction toward the desired direction.

25 ENERGY STORAGE↗