Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Observations of Gravity Waves in the Middle Atmosphere of Mars

Gravity waves are ubiquitous throughout the atmosphere of Mars. Their propagation and dissipation influence the circulation and thermal structure of the middle and upper atmosphere. Yet there have been few studies of gravity wave characteristics in the middle atmosphere, a region that is critical for their propagation from generation in the lower atmosphere to dissipation and associated exchanges of momentum and energy in the upper atmosphere. There have been few studies because few atmospheric profiles span the middle atmosphere with the kilometer-scale or smaller vertical resolution that is Required to characterize gravity waves. Here we report the characterization of gravity waves in the middle atmosphere using 12 high-resolution atmospheric density profiles. Four of these were acquired from a ground-based stellar occultation from 1976 that yielded immersion and emersion profiles on opposite sides of the planet, and the remaining eight were measured during atmospheric entry by landers and rovers. Predominant wavelengths were 3–14 km, and amplitudes were generally 0.8%–2.5%. Where static stability is large and positive, gravity waves grow efficiently. In other instances, static stability is not large and positive over a wide altitude range, and gravity wave amplitudes do not behave as neatly. These observations of gravity waves in the middle atmosphere of Mars can be used to test gravity wave parameterizations in large-scale general circulation models and to investigate predictions for how gravity wave propagation and dissipation influence the circulation and thermal structure of the middle and upper atmosphere.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Role of tilt grain boundaries on the structural integrity of WSe 2 monolayers

Transition metal dichalcogenides (TMDCs) are potential materials for future optoelectronic devices. Grain boundaries (GBs) can significantly influence the optoelectronic properties of TMDC materials. Here, we have investigated the mechanical characteristics of tungsten diselenide (WSe 2 ) monolayers and failure process with symmetric tilt GBs using ReaxFF molecular dynamics simulations. In particular, the effects of topological defects, loading rates, and temperatures are investigated. We considered nine different grain boundary structures of monolayer WSe 2 , of which six are armchair (AC) tilt structures, and the remaining three are zigzag (ZZ) tilt structures. Our results indicate that both tensile strength and fracture strain of WSe 2 with symmetric tilt GBs decrease as the temperature increases. We revealed an interfacial phase transition for high-angle GBs reduces the elastic strain energy within the interface at finite temperatures. Furthermore, brittle cracking is the dominant failure mode in the WSe 2 monolayer with tilted GBs. WSe 2 GB structures showed more strain rate sensitivity at high temperatures than at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thickness and temperature dependence of the atomic-scale structure of SrRuO 3 thin films

The temperature-dependent layer-resolved structure of 3 to 44 unit cell thick SrRuO 3 (SRO) films grown on Nb-doped SrTiO 3 substrates is investigated using a combination of high-resolution synchrotron x-ray diffraction and high-resolution electron microscopy to understand the role that structural distortions play in suppressing ferromagnetism in ultra-thin SRO films. The oxygen octahedral tilts and rotations and Sr displacements characteristic of the bulk orthorhombic phase are found to be strongly dependent on temperature, the film thickness, and the distance away from the film–substrate interface. For thicknesses, t, above the critical thickness for ferromagnetism (t > 3 uc), the orthorhombic distortions decrease with increasing temperature above T C . Below T C , the structure of the films remains constant due to the magneto-structural coupling observed in bulk SRO. The orthorhombic distortions are found to be suppressed in the 2–3 interfacial layers due to structural coupling with the SrTiO 3 substrate and correlate with the critical thickness for ferromagnetism in uncapped SRO films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Profile of Twenty-Three Human Milk Oligosaccharides in Han Chinese Mothers throughout Postpartum 1 year

Human milk oligosaccharides (HMOs) are multifunctional carbohydrates in breast milk, which are composed by a variety of structures. This study aimed to identified HMOs concentration profile, milk microbiota composition, and the associations with major maternal characteristics in Han Chinese mothers in the one-year lactation period. Seventeen healthy mothers aged from 28 to 36 years, who gave birth to healthy term infants, were recruited. Carbohydrates were detected using the MIRIS human milk analyzer (HMA), and twenty-three HMOs were quantified using ultra-performance liquid chromatography-triple quadrupole mass spectrometry (UPLC-MS). Results showed that carbohydrates were relatively stable, while total HMO concentrations ranged from 1.74 to 9.72 g/L and decreased gradually over lactation in breast milk. Based on the structure, seven sialylated HMOs concentration showed the significant decline ( p < 0.05 ) after three months in lactation. In addition, the relationships between maternal factors, containing the lactation period, genetic status, delivery mode, parity, and milk microbiota profile, and the HMO composition in healthy women, which still need further investigations, were observed.

Xun, Yiping↗
DOE OSTI2025

Secondary electron emission for reticulated carbon foam surfaces using direct measurements and spectroscopic analysis

This study investigates secondary electron emission (SEE) characteristics of reticulated foams using direct measurements and analytical modeling. Total SEE was quantified, revealing suppression of up to 44% in carbon foam structures compared to planar graphite surfaces. An optimal geometric configuration was identified and supported by analytical models. SEE angular dependence experiments showed diverse behaviors: fiber-like behavior and directional dependence for pore and ligaments on the mm scale, with fuzz-like characteristics when the foam features are between 10–100 µm. Electron energy analyzer measurements showed that carbon foams preferentially suppress inelastic backscattered electrons (BSEs) more so than true secondary electrons (SEs). The analysis indicated a larger fraction of low-energy SE generation in foams compared to flat surfaces due to increased emission from curved fiber ligaments and tertiary SEs from high-energy BSEs. These findings have implications for design and optimization of materials with tailored electron emission properties for applications like plasma-facing components, spacecraft materials, and accelerator surfaces.

Auger↗
DOE OSTI2025

In Situ Study of Resistive Switching in a Nitride‐Based Memristive Device

Abstract Resistive switching (RS) devices with ultra‐low‐voltage threshold and reliable switching repeatability exhibits great potential applications in energy‐efficient data storage and neuromorphic computing. Understanding switching mechanisms at nanoscale is critical to design RS devices with improved performance. In this work, a lamella memristive device using focused ion beam (FIB) method based on the metal/TiO x /TiN/Si structure device is fabricated. In situ transmission electron microscopy (TEM) and current–voltage ( I–V ) characteristic demonstrate that the lamella device shows a volatile RS behavior with a threshold switching at ≈ ± 0.4 V. In situ scanning transmission electron microscopy (STEM) experiments with electron energy loss spectroscopy (EELS) reveal that the charge carriers such as oxygen vacancies migrate under positive/negative DC bias and modulate Schottky barriers at the top and bottom metal/semiconductor interfaces. The RS mechanism of the lamella device is based on the Schottky barriers modulation and Joule heating assisted electric field triggered thermal runaway (FTTR) occurred at the metal/semiconductor interfaces. The fundamental insights gained from this study presents a perspective on interface‐type RS devices processing and opens up new technological opportunities of fabricating ultra‐low‐energy memristive devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Urbanization Impact on Regional Climate and Extreme Weather: Current Understanding, Uncertainties, and Future Research Directions

Abstract Urban environments lie at the confluence of social, cultural, and economic activities and have unique biophysical characteristics due to continued infrastructure development that generally replaces natural landscapes with built-up structures. The vast majority of studies on urban perturbation of local weather and climate have been centered on the urban heat island (UHI) effect, referring to the higher temperature in cities compared to their natural surroundings. Besides the UHI effect and heat waves, urbanization also impacts atmospheric moisture, wind, boundary layer structure, cloud formation, dispersion of air pollutants, precipitation, and storms. In this review article, we first introduce the datasets and methods used in studying urban areas and their impacts through both observation and modeling and then summarize the scientific insights on the impact of urbanization on various aspects of regional climate and extreme weather based on more than 500 studies. We also highlight the major research gaps and challenges in our understanding of the impacts of urbanization and provide our perspective and recommendations for future research priorities and directions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Edge dislocation mediated anomalous charge transfer in face centered cubic high entropy alloys

The charge transfer in alloys dictates their structural and functional properties. The presence of the line defect can influence the charge transfer characteristics in alloys. The edge dislocation-volume misfit interaction in high entropy alloys is a critical area of interest concerning the development of accurate solid solution strengthening models for these materials. The evolution of the volume misfit of atoms is either studied empirically using Vegard's law or mechanistically using \emph{ab initio} calculations, without considering the effect of edge dislocation on charge transfer explicitly. In this work, we show the influence of edge dislocation on the charge transfer in CoCrFeMnNi, CoCrNi and CoNi using large-scale \emph{ab initio} calculations. The anomalous charge transfer characteristics, in terms of deviations from electronegativity trends, are demonstrated, which are dictated by electronegativity equalisation rather than pair-atom interactions. The deviation of atomic volume in the compressive and tensile stress regions of the edge dislocation is rationalised in terms of anomalous magneto-volume fluctuations in such alloys.

Ghosh, Swarnava [ORNL] (ORCID:0000000338005264)↗
DOE OSTI2019

Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects

Additive manufacturing provides an appealing means to process titanium alloy parts with new levels of conformability, complexity, and weight reduction. However, due to the heating/cooling rates and heat transfer associated with directed energy source material processing, the as-built AM parts contain unique material and microstructural features. In order to confidently manufacture fatigue critical additive manufactured (AM) Ti-6Al-4V parts, a better understanding of the interrelationships between powder feedstock, AM processes, structure of the processed parts, their resulting mechanical properties, and their performance under realistic loadings is necessary. Part I of this two-part collection focuses on the powder-process-structure relationships and how powder feedstock, manufacturing, and post-processing conditions can affect the microstructure and defect features that ultimately contribute to the fatigue performance of Ti-6Al-4V parts. The material and physical phenomena inherent to the AM process of Ti-6Al-4V are discussed in detail and related to the phase composition/structure, grain morphology, surface characteristics, defect size/distribution, and post-process treatments available for AM parts. This investigation is the foundation for the structure-performance relationships that will be covered in detail in Part II.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Large-scale paleo water-table rise in a deep desert aquifer recorded by dissolved noble gases

Illuminating past hydrological and climatological conditions in arid regions may provide insights into future trends in groundwater availability. The main objective of this study is to explore paleorecharge processes in the deep regional Nubian Sandstone Aquifer (NSA), which stretches below the hyperarid deserts of the Sinai Peninsula (Egypt) and the Negev (Israel), using dissolved noble gas data. Extremely high amounts of dissolved excess air (Ne concentrations up to 4 × solubility equilibrium) were observed in the ancient ( 81 Kr-depleted) groundwater that was recharged during past pluvial epochs in the basin. Here, the observed unique excess air signal and the clear spatiotemporal structure of the noble gas compositions in the aquifer are hypothesized to reflect two major characteristics of the groundwater system: (a) large-scale, long-term rises in the water table that facilitate the entrapment and dissolution of air bubbles under increased hydrostatic pressure, and (b) the geological settings in the southern recharge area in Sinai, including an almost horizontal position of the layers and intercalation of low-permeability rock formations within the aquifer, which inefficiently reject air bubbles from groundwater, thereby allowing for substantial entrapment of bubbles that dissolve as the water table rises. Enhanced dissolution of entrapped air was also observed in other paleo-groundwater-containing regional sandstone aquifers across North Africa, which, together with the recent findings from the NSA, suggest that largescale water table fluctuations have likely extensively occurred during past pluvial periods over these (and possibly other) arid regions. A preliminary assessment of noble gas recharge temperatures (NGTs) indicates an apparent decoupling of surface and water table temperatures in the case of deep aquifers with a thick (hundreds of m) unsaturated zone. This observed decoupling calls for a re-evaluation of previously obtained NGT records and a need for future work to consider the modification of NGTs due to soil air fractionation and geothermal heating of the underlying deep unsaturated zones.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Disentangling error structures of precipitation datasets using decision trees

Characterizing error structures in precipitation products not only facilitates their proper applications for scientific and practical purposes but also helps improve their retrieval algorithms and processing methods. Despite the fact that multiple precipitation products have been assessed in the literature, factors that affect their error structures remain inadequately addressed. By interpreting 60 binary decision trees, this study disentangles the error characteristics of precipitation products in terms of their spatiotemporal patterns and geographical factors. Three independent precipitation products - two satellite-based and one reanalysis datasets: the Integrated Multi-satellitE Retrievals for GPM (Global Precipitation Measurement) late run (IMERG-L), Soil Moisture to Rain-Advanced SCATterometer (SM2RAIN-ASCAT), and the Modern-Era Retrospective analysis for Research and Applications, Version 2 uncorrected precipitation output (MERRA2-UC), are evaluated across the contiguous United States from 2010 to 2019. Here, the ground-based Stage IV precipitation dataset is used as the ground truth. Results indicate that the MERRA2-UC outperforms the IMERG-L and SM2RAIN-ASCAT with higher accuracy and more stable interannual patterns for the analysis period. Decision trees cross-assess three spatiotemporal factors and find that the underestimation of MERRA2-UC occurs in the east of the Rocky Mountains, and SM2RAIN-ASCAT underestimates precipitation over high latitudes, especially in winter. Additionally, the decision tree method ascribes system errors to nine different geographical characteristics, of which the distance to the coast, soil type, and DEM are the three dominant features. On the other hand, the land cover type, topography position index, and aspect are three relatively weak factors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Substituent Effects on Transient, Carbodiimide-Induced Geometry Changes in Diphenic Acids

Nucleotide-induced conformational changes in motor proteins are key to many important cell functions. Inspired by this biological behavior, we report a simple chemically fueled system that exhibits carbodiimide-induced geometry changes. Bridging via transient anhydride formation leads to a significant reduction of the twist about the biaryl bond of substituted diphenic acids, giving a simple molecular clamp. The kinetics are well-described by a simple mechanism, allowing structure–property effects to be determined. The kinetic parameters can be used to derive important characteristics of the system such as the efficiencies (anhydride yields), maximum anhydride concentrations, and overall lifetimes. Transient diphenic anhydrides tolerate steric hindrance ortho to the biaryl bond but are significantly affected by electronic effects, with electron-deficient substituents giving lower yields, peak conversions, and lifetimes. Furthermore, the results provide useful guidelines for the design of functional systems incorporating diphenic acid units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Influence of Water-Soluble Compounds from Unpretreated Corn Stover Pellets on Enzymatic Hydrolysis of Cellulose

Aqueous extractives are minor and non-structural compounds in biomass that can be extracted using solvents, while contributing significantly to lignocellulose characteristics. Yet their roles in enzyme-mediated processing of lignocellulosic biomass remain elusive. Here, we examine the composition and features of extractives derived from untreated pelleted corn stover as well as their effects on enzymatic hydrolysis. Unlike the observations described in previous reports, we find that water extractable material improves the enzymatic hydrolysis of extractive-free stover by 67% with a glucose yield increase from 12% to 20% with 6 FPU cellulase per g glucan, whereas the enzyme activities are diminished when using microcrystalline cellulose as a substrate. The different behavior of corn stover and microcrystalline cellulose is likely attributed to the presence of lignin, which may interact with inhibitory compounds such as phenolics, mitigating the detrimental impacts of soluble inhibitors or insoluble lignin or both. These findings advance our fundamental understanding of the intrinsic behavior of extractives and help to optimize the schemes for efficient and cost-competitive enzymatic conversion of lignocellulose.

09 BIOMASS FUELS↗
DOE OSTI2019

Episodes of Warm-Air Advection Causing Cloud-Surface Decoupling During the MARCUS

It has been understood for decades that advection of a cloud-topped marine boundary layer (CTBL) over warmer sea surface causes the stratification (or decoupling) of the CTBL via the entrainment feedback, a mechanism commonly known as “deepening-warming” decoupling that is typical in subtropics. This study focuses on the opposite direction of advection, that is, low-level warm air advection (LLWAA), and its impacts on the decoupling degree of a CTBL. Our hypothesis is that LLWAA stabilizes a CTBL, causing a decoupling of the CTBL. It is tested for three LLWAA episodes observed during the Measurements of Aerosols, Radiation, and CloUds over the Southern Ocean (MARCUS) field campaign between the Hobart (43°S, 147°E), Australia, and several Antarctic coast stations. By synthesizing the shipborne measurements of CTBL structure, Himawari-8 satellite imagery of cloud fields, and reanalysis of meteorological field, four common characteristics of CTBLs under the LLWAA are found: (1) CTBLs are highly stratified to the extent that penetrations of cumulus into main temperature inversions, which are common for subtropical decoupled CTBLs, do not exist; (2) sea surface temperature is 1–2 K lower than the near-surface air temperature; (3) clouds manifest stratiform with lifetime as long as several tens of hours; and (4) they locate in warm sectors of middle-latitude cyclones. Possible mechanisms for the maintenance of decoupled clouds under LLWAA are discussed in terms of dynamic and thermodynamic factors. Lapse rates of the decoupled CTBLs are markedly lower than those commonly used for passive satellite estimation of cloud top heights.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Spatio–Temporal Coarse–Graining Decomposition of the Global Ocean Geostrophic Kinetic Energy

We expand on a recent determination of the first global energy spectrum of the ocean’s surface geostrophic circulation using a coarse-graining (CG) method. We compare spectra from CG to those from spherical harmonics by treating land in a manner consistent with the boundary conditions. While the two methods yield qualitatively consistent domain-averaged results, spherical harmonics spectra are too noisy at gyre-scales (> 1000 km). More importantly, spherical harmonics are inherently global and cannot provide local information connecting scales with currents geographically. CG shows that the extra-tropics mesoscales (100–500 km) have a root-mean-square (rms) velocity of ~15 cm/s, which increases to ~30–40 cm/s locally in the Gulf Stream and Kuroshio and to ~16–28 cm/s in the ACC. There is notable hemispheric asymmetry in mesoscale energy-per-area, which is higher in the north due to continental boundaries. We estimate that ≈25–50% of total geostrophic energy is at scales smaller than 100 km, and is un(der)-resolved by pre-SWOT satellite products. Spectra of the time-mean circulation show that most of its energy (up to 70%) resides in stationary eddies with characteristic scales smaller than (< 500 km). This highlights the preponderance of ‘standing’ small-scale structures in the global ocean due to the temporally coherent forcing by boundaries. By coarse-graining in space and time, we compute the first spatio-temporal global spectrum of geostrophic circulation from AVISO and NEMO. These spectra show that every length-scale evolves over a wide range of time-scales with a consistent peak at ≈200 km and ≈2–3 weeks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Polarization rotation in a ferroelectric BaTiO 3 film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO 3 thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film’s top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method’s compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural, magneto transport and magnetic properties of Ruddlesden–Popper La 2-2x Sr 1+2x Mn 2 O 7 (0.42≤x≤0.52) layered manganites

The magneto transport of Ruddlesden–Popper, La 2-2x Sr 1+2x Mn 2 O 7 (0.42≤x≤0.52), 2-dimensional bilayered manganites have been investigated in a broad temperature range. The samples have been synthesized using the solid-state reaction method. Rietveld refinement of the X-ray diffraction data indicates the tetragonal structure formation with I4/mmm space group. The resistivity curves of the samples present a general characteristic of metal-insulator (MI) transition at certain temperature (T MI ). Besides, for samples with x = 0.48, 0.50, and 0.52, at a certain temperature (T CO ) well below T MI the charge ordering is also evident. Furthermore, the samples display a shallow upturn in resistivity below T min due to the Kondo like spin scattering effect, weak localization and electron-phonon interaction. The high temperature semiconducting (T>T MI ) region, the resistivity curve follows the 3D Mott’s variable hopping transport mechanism. The overall suppression of resistivity accounts for a substantial magnetoresistance by applying a magnetic field and the characteristic change in T MI , T CO , and T min are discussed. Temperature-dependent magnetization demonstrates the suppression of ferromagnetism and evident of antiferromagnetic nature with an apparent charge ordering with increasing concentration of Sr 2+ .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Many-body effects in the X-ray absorption spectra of liquid water

Significance In X-ray absorption spectroscopy, an electron–hole excitation probes the local atomic environment. The interpretation of the spectra requires challenging theoretical calculations, particularly in a system like liquid water, where quantum many-body effects and molecular disorder play an important role. Recent advances in theory and simulation make possible new calculations that are in good agreement with experiment, without recourse to commonly adopted approximations. Based on these calculations, the three features observed in the experimental spectra are unambiguously attributed to excitonic effects with different characteristic correlation lengths, which are distinctively affected by perturbations of the underlying H-bond structure induced by temperature changes and/or by isotopic substitution. The emerging picture of the water structure is fully consistent with the conventional tetrahedral model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗