Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Structural analysis of emerging ferrite: Doped nickel zinc ferrite

Ni{sub 0.6-x}Zn{sub 0.4}Co{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.033, 0.264) nanoparticles were synthesized by sol-gel method and annealed at 900°C. Structural properties of all prepared samples were examined with X-ray diffraction (XRD). The partial formation of hematite (α-Fe{sub 2}O{sub 3}) secondary phase with spinel phase cubic structure of undoped and cobalt doped nickel zinc ferrite was found by XRD peaks. The variation in crystallite size and other structural parameters with cobalt doping has been calculated for most prominent peak (113) of XRD and has been explained on the basis of cations ionic radii difference.

36 MATERIALS SCIENCE↗

Hydrogen-doped In{sub 2}O{sub 3} transparent conducting oxide films prepared by solid-phase crystallization method

We have characterized amorphous to crystalline transformation of hydrogen (H)-doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:H) films by transmission electron microscopy, thermal desorption spectroscopy, spectroscopic ellipsometry, and Hall measurements. The In{sub 2}O{sub 3}:H films that show a mixed-phase structure embedded with small density of crystalline grains in a large volume fraction of amorphous phase have been fabricated at room temperature by the sputtering of an In{sub 2}O{sub 3} ceramic target with introduction of H{sub 2}O vapor, and the films have been postannealed in vacuum to crystallize the amorphous phase. With increasing annealing temperature up to 200 deg. C, the film shows a large increase in Hall mobility ({mu}{sub Hall}) from 42 to 110 cm{sup 2}/V s and a decrease in carrier density (N{sub Hall}) from 4.6x10{sup 20} to 2.1x10{sup 20} cm{sup -3} with slight decrease in resistivity. The change in {mu}{sub Hall} and N{sub Hall} with annealing temperature is strongly correlated with the volume fractions of the amorphous and crystalline phases in the films. Analyses of dielectric functions of the films using the Drude model revealed that the high electron mobility in the crystallized films is attributed mainly to longer relaxation time rather than smaller effective mass, as compared with as-deposited films. Temperature-dependent Hall analysis, relationship between N{sub Hall} and {mu}{sub Hall}, and comparison between {mu}{sub Hall} and optical mobility showed that (i) scattering processes inside amorphous and/or crystalline matrices limit the mobility, (ii) doubly charged ionized impurity scattering is reduced by crystallization, and (iii) phonon scattering becomes dominant after crystallization in the In{sub 2}O{sub 3}:H films. The above results suggest that H-doping reduces carrier scattering in the crystallized In{sub 2}O{sub 3}:H and structural rearrangements during crystallization eliminate oxygen deficiency and generate H{sup +} that acts as a singly charged donor. In this article, we discuss the transport properties with the variation in microscopic and chemical structures in the In{sub 2}O{sub 3}:H films.

36 MATERIALS SCIENCE↗

Non-uniform Mg distribution in GaN epilayers grown on mesa structures for applications in GaN power electronics

A strong variation in the luminescence characteristics in Mg-doped GaN grown on mesa structures has been observed, with the sidewall luminescence being different from that of the flat regions. A comparison with the luminescence characteristics of Mg-doped GaN epilayers with different Mg concentrations indicates that the sidewall has a significantly lower Mg content. Here, this observed non-uniform Mg distribution is attributed to the dependence of Mg incorporation efficiency on the crystal orientation of the growth surface, which should impact the electrical performance of power devices.

36 MATERIALS SCIENCE↗

Planck intermediate results: XXIV. Constraints on variations in fundamental constants*

Any variation in the fundamental physical constants, more particularly in the fine structure constant, α, or in the mass of the electron, me, affects the recombination history of the Universe and cause an imprint on the cosmic microwave background angular power spectra. We demonstrate that the Planck data allow one to improve the constraint on the time variation of the fine structure constant at redshift z ∼ 10 3 by about a factor of 5 compared to WMAP data, as well as to break the degeneracy with the Hubble constant, H 0 . In addition to α, we can set a constraint on the variation in the mass of the electron, me, and in the simultaneous variation of the two constants. We study in detail the degeneracies between fundamental constants and the cosmological parameters, in order to compare the limits obtained from Planck and WMAP and to determine the constraining power gained by including other cosmological probes. We conclude that independent time variations of the fine structure constant and of the mass of the electron are constrained by Planck to Δα/α = (3.6 ± 3.7) × 10 -3 and Δme/me = (4 ± 11) × 10 -3 at the 68% confidence level. We also investigate the possibility of a spatial variation of the fine structure constant. The relative amplitude of a dipolar spatial variation in α (corresponding to a gradient across our Hubble volume) is constrained to be δα/α = (-2.4 ± 3.7) × 10 -2 .

79 ASTRONOMY AND ASTROPHYSICS↗

Electrical properties of silicon schottky diodes containing metal films of various compositions

Au{sub x}Ti{sub 100{sub -}} {sub x}/n-Si Schottky diodes are fabricated and studied; in addition, the electrical properties of diodes containing metal films with varying composition (x = 0, 14, 30, 38, 60, 80, and 100) are also studied. Using X-ray phase analysis, it is established that the film of Au{sub 38}Ti{sub 62} composition has the amorphous structure, while the remaining films Au{sub x}Ti{sub 100-x} possess the polycrystalline structure. The main parameters of the Schottky diodes are determined in relation to the composition and structure of the metal films. As a result, it is shown that the electrical properties of Au{sub x}Ti{sub 100-x}/n-Si Schottky diodes are related to variations in the composition and structure of metal films.

36 MATERIALS SCIENCE↗

Solution structure of the N-terminal domain of proteasome lid subunit Rpn5

The 26S proteasome is the major protein degradation machinery in living cells. The Rpn5 protein is one scaffolding subunit in the lid subcomplex of the 19S regulatory particle in the proteasome holoenzyme. Herein we report the solution structure of the N-terminal domain (NTD) of yeast Rpn5 at high resolution by NMR spectroscopy. The results show that Rpn5 NTD adopts α-solenoid-like fold in right-handed superhelical configuration formed by a number of α-helices. Structural comparisons with currently available cryo-EM structures reveal local structural differences in the first three helices between yeast and human Rpn5. The results further highlight the conformational flexibility in three possible protein interaction sites. Moreover, the structures of the NTD show large variations among different PCI-containing Rpn subunits. Our current results provide atomic-level structural basis for further investigations of protein-protein interactions and the proteasome assembly pathway.

60 APPLIED LIFE SCIENCES↗

Structural transformation in nickel doped zinc oxide nanostructures

Graphical abstract: Display Omitted Highlights: ► A systematic study of 1–10% Ni doped ZnO nanostructures (Ni:ZnO NS). ► Effect of Ni concentration on properties of Ni:ZnO NS was intensively investigated. ► Structural transformation in Ni:ZnO NS demonstrated through characterizations. ► Alteration in vibrational modes of Ni:ZnO NS were meticulously analyzed. ► Intricacies of structural evolution, from particles to rods, were comprehended. -- Abstract: In this article, structural transformation in nickel doped zinc oxide nanostructures is reported. The ZnO nanostructures are synthesized with 1–10% of nickel doping through a chemical precipitation method. The undoped and doped nanostructures were systematically investigated employing X-ray diffraction (XRD), transmission and scanning electron microscopy (TEM/SEM), Fourier transform infrared (FTIR) and micro-Raman spectroscopy (μRS). The wurtzite phase of the material and associated lattice parameters were ascertained through XRD analysis. TEM/SEM images reveal the structural transformation of ZnO nanostructures with variation in nickel doping. The study of vibrational modes of nanostructures at different stages of structural transformation, as performed through FTIR and Raman spectroscopy, assist in deciphering the pivotal role of doping concentration in gradual evolution of nickel doped ZnO structure from nanoparticles to nanorods.

36 MATERIALS SCIENCE↗

Describing the Influence of Ball-milling on the Amorphization of Flubendazole Using the PDF and RMC Methods with X-ray Powder Diffraction Data

Flubendazole (FBZ) is a poorly water-soluble drug, and different methodologies have been proposed to improve its oral bioavailability. Obtaining the amorphous drug phase is an alternative to improve its water solubility. Several techniques for drug amorphization, such as spray drying, lyophilization, melt quenching, solvent-evaporation, and ball milling, can yield various types of structural disorder and possibly render variations in physicochemical properties. Herein, we focus on evaluating the influence of the ball-milling process on the amorphization of FBZ. The characterization of the average global and local structures before, during, and after the milling process is described by sequential Rietveld refinements, pair distribution function analysis, and the Reverse Monte Carlo method. In conclusion, we show that preserving the local structure (nearest molecules) can be responsible for avoiding the fast structure recrystallization commonly observed when using the solvent-evaporation process for the studied drug.

60 APPLIED LIFE SCIENCES↗

Berry-like phases in structured atoms and molecules

Quantum mechanical phases arising from a periodically varying Hamiltonian are considered. These phases are derived from the eigenvalues of a stationary, 'dressed' Hamiltonian that is able to treat internal atomic or molecular structure in addition to the time variation. In the limit of an adiabatic time variation, the usual Berry phase is recovered. For more rapid variation, nonadiabatic corrections to the Berry phase are recovered in perturbation theory, and their explicit dependence on internal structure emerges. Simple demonstrations of this formalism are given, to particles containing interacting spins, and to molecules in electric fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stoichiometric control of DNA-grafted colloid self-assembly

Significance Recently, there has been an increased interest in understanding the self-assembly of DNA-grafted colloids into different morphologies. Conventional approaches assume that the critical design parameters are the size and number of DNA grafts on each particle. Stoichiometry is viewed as a secondary variable and its exact role in this context is unresolved. In contrast with these expectations, our experiments show that the equilibrium lattice structure can be tuned through variations in the imposed stoichiometry. These findings are captured through simple extensions of the complementary contact model. Stoichiometry is thus shown to be a powerful handle to control these self-assembled structures.

36 MATERIALS SCIENCE↗

Transforming the representation of the boundary layer and low clouds for high-resolution regional climate modeling: Final report

Stratocumulus and shallow cumulus clouds in subtropical oceanic regions (e.g., Southeast Pacific) cover thousands of square kilometers and play a key role in regulating global climate (e.g., Klein and Hartmann, 1993). Numerical modeling is an essential tool to study these clouds in regional and global systems, but the current generation of climate and weather models has difficulties in representing them in a realistic way (e.g., Siebesma et al., 2004; Stevens et al., 2007; Teixeira et al., 2011). While numerical models resolve the large-scale flow, subgrid-scale parameterizations are needed to estimate small-scale properties (e.g. boundary layer turbulence and convection, clouds, radiation), which have significant influence on the resolved scale due to the complex nonlinear nature of the atmosphere. To represent the contribution of these fine-scale processes to the resolved scale, climate models use various parameterizations, which are the main pieces in the model that contribute to the low clouds dynamics and therefore are the major sources of errors or approximations in their representation. In this project, we aim to 1) improve our understanding of the physical processes in thermal circulation and cloud formation, 2) examine the performance and sensitivity of various parameterizations in the regional weather model (Weather Research and Forecasting model; WRF), and 3) develop, implement, and evaluate the advanced boundary layer parameterization in the regional model to better represent stratocumulus, shallow cumulus, and their transition. Thus, this project includes three major corresponding studies. We find that the mean diurnal cycle is sensitive to model domain in ways that reveal the existence of different contributions originating from the Southeast Pacific land-masses. The experiments suggest that diurnal variations in circulations and thermal structures over this region are influenced by convection over the Peruvian sector of the Andes cordillera, while the mostly dry mountain-breeze circulations force an additional component that results in semi-diurnal variations near the coast. A series of numerical tests, however, reveal sensitivity of the simulations to the choice of vertical grid, limiting the possibility of solid quantitative statements on the amplitudes and phases of the diurnal and semidiurnal components across the domain. According to our experiments, the Mellor-Yamada-Nakanishi-Niino (MYNN) boundary layer scheme and the WSM6 microphysics scheme is the combination of schemes that performs best. For that combination, mean cloud cover, liquid water path, and cloud depth are fairly wellsimulated, while mean cloud top height remains too low in comparison to observations. Both microphysics and boundary layer schemes contribute to the spread in liquid water path and cloud depth, although the microphysics contribution is slightly more prominent. Boundary layer schemes are the primary contributors to cloud top height, degree of adiabaticity, and cloud cover. Cloud top height is closely related to surface fluxes and boundary layer structure. Thus, our study infers that an appropriate tuning of cloud top height would likely improve the low-cloud representation in the model. Finally, we show that entrainment governs the degree of adiabaticity, while boundary layer decoupling is a control on cloud cover. In the intercomparison study using WRF single-column model experiments, most parameterizations show a poor agreement of the vertical boundary layer structure when compared with large-eddy simulation models. We also implement a new Total-Energy/Mass- Flux boundary layer scheme into the WRF model and evaluate its ability to simulate both stratocumulus and shallow cumulus clouds. Result comparisons against large-eddy simulation show that this advanced parameterization based on the new Eddy-Diffusivity/Mass-Flux approach provides a better performance than other boundary layer parameterizations.

54 ENVIRONMENTAL SCIENCES↗

Ultra-sensitive pressure dependence of bandgap of rutile-GeO{sub 2} revealed by many body perturbation theory

The reported values of bandgap of rutile GeO{sub 2} calculated by the standard density functional theory within local-density approximation (LDA)/generalized gradient approximation (GGA) show a wide variation (∼2 eV), whose origin remains unresolved. Here, we investigate the reasons for this variation by studying the electronic structure of rutile-GeO{sub 2} using many-body perturbation theory within the GW framework. The bandgap as well as valence bandwidth at Γ-point of rutile phase shows a strong dependence on volume change, which is independent of bandgap underestimation problem of LDA/GGA. This strong dependence originates from a change in hybridization among O-p and Ge-(s and p) orbitals. Furthermore, the parabolic nature of first conduction band along X-Γ-M direction changes towards a linear dispersion with volume expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Is there further evidence for spatial variation of fundamental constants?

Indications of spatial variation of the fine-structure constant, {alpha}, based on study of quasar absorption systems have recently been reported [J. K. Webb, J. A. King, M. T. Murphy, V. V. Flambaum, R. F. Carswell, and M. B. Bainbridge, arXiv:1008.3907.]. The physics that causes this {alpha}-variation should have other observable manifestations, and this motivates us to look for complementary astrophysical effects. In this paper we propose a method to test whether spatial variation of fundamental constants existed during the epoch of big bang nucleosynthesis and study existing measurements of deuterium abundance for a signal. We also examine existing quasar absorption spectra data that are sensitive to variation of the electron-to-proton mass ratio {mu} and x={alpha}{sup 2{mu}}g{sub p} for spatial variation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

MODEL COMPARISON FOR THE DENSITY STRUCTURE ACROSS SOLAR CORONAL WAVEGUIDES

The spatial variation of physical quantities, such as the mass density, across solar atmospheric waveguides governs the timescales and spatial scales for wave damping and energy dissipation. The direct measurement of the spatial distribution of density, however, is difficult, and indirect seismology inversion methods have been suggested as an alternative. We applied Bayesian inference, model comparison, and model-averaging techniques to the inference of the cross-field density structuring in solar magnetic waveguides using information on periods and damping times for resonantly damped magnetohydrodynamic transverse kink oscillations. Three commonly employed alternative profiles were used to model the variation of the mass density across the waveguide boundary. Parameter inference enabled us to obtain information on physical quantities such as the Alfvén travel time, the density contrast, and the transverse inhomogeneity length scale. The inference results from alternative density models were compared and their differences quantified. Then, the relative plausibility of the considered models was assessed by performing model comparison. Our results indicate that the evidence in favor of any of the three models is minimal, unless the oscillations are strongly damped. In such a circumstance, the application of model-averaging techniques enables the computation of an evidence-weighted inference that takes into account the plausibility of each model in the calculation of a combined inversion for the unknown physical parameters.

79 ASTRONOMY AND ASTROPHYSICS↗