Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMODYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Thermodynamic properties of calcium-magnesium alloys determined by emf measurements

The thermodynamic properties of calcium-magnesium alloys were determined by electromotive force (emf) measurements using a Ca(in Bi)vertical bar CaF2 vertical bar Ca(in Mg) cell over the temperature range 713-1048 K. The activity and partial molar Gibbs free energy of calcium in magnesium were calculated for nine Ca-Mg alloys, calcium mole fractions varying from x(ca) = 0.01 to 0.80. Thermodynamic properties of magnesium in calcium and the molar Gibbs free energy of mixing were estimated using the Gibbs-Duhem relationship. In the all-liquid region at 1010 K, the activity of calcium in magnesium was found to range between 8.8 x 10(-4) and 0.94 versus pure calcium. The molecular interaction volume model (MIVM) was used to model the activity coefficient of Ca and Mg in Ca-Mg liquid alloys. Based on this work, Ca-Mg alloys show promise as the negative electrode of a liquid metal battery in which calcium is the itinerant species: alloying with Mg results in both a decrease in operating temperature and suppression of Ca metal solubility in the molten salt electrolyte. (C) 2012 Elsevier Ltd. All rights reserved.

Newhouse, JM↗

A fast and accurate modeling approach for water and steam thermodynamics with practical applications in district heating system simulation

In U.S. district heating (DH) systems, steam is the most common heat transport medium. Industry demand for new advanced modeling capabilities of complete steam DH systems is increasing; however, the existing models for water/steam thermodynamics are too slow for large system simulations because of computationally expensive algebraic loops that require the solution to nonlinear systems of equations. For practical applications, this work presents a novel split-medium approach that implements numerically efficient liquid water models alongside various water/steam models, breaking costly algebraic loops by decoupling mass and energy balance equations. New component models for steam DH systems are also presented. We implemented the models in the equation based Modelica language and evaluated accuracy and computing speed across multiple scales: from fundamental thermodynamic properties to complete districts featuring 10 to 200 buildings. Compared to district models with the IF97 water/steam model and equipment models from the Modelica Standard Library, the new implementation improves the scaling rate for large districts from cubic to quadratic with negligible compromise to accuracy. Additionally, for an annual simulation with 180 buildings, this translates to a computing time reduction from 33 to 1-1.5 h. These results are critically important for industry practitioners to simulate steam DH systems at large scales.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of particle size on thermodynamics and lithium ion transport in electrodes made of Ti 2 Nb 2 O 9 microparticles or nanoparticles

This study compares the charging mechanisms, thermodynamics, lithium ion transport, and operando isothermal calorimetry in lithium-ion battery electrodes made of Ti 2 Nb 2 O 9 microparticles or nanoparticles synthesized by solid-state or sol-gel methods, respectively. First, electrochemical testing showed that electrodes made of Ti 2 Nb 2 O 9 nanoparticles exhibited larger specific capacity, smaller polarization, and better capacity retention at large currents than those made of Ti 2 Nb 2 O 9 microparticles. Furthermore, potentiometric entropy measurements revealed that electrodes made of either Ti 2 Nb 2 O 9 microparticles or nanoparticles showed similar thermodynamics behavior governed by lithium intercalation in solid solution, as confirmed by in situ XRD measurements. However, electrodes made of Ti 2 Nb 2 O 9 nanoparticles featured smaller overpotential and faster lithium ion transport than those made of Ti 2 Nb 2 O 9 microparticles. In fact, operando isothermal calorimetry revealed smaller instantaneous and time-averaged irreversible heat generation rates at electrodes made of Ti 2 Nb 2 O 9 nanoparticles, highlighting their smaller resistive losses and larger electrical conductivity. Finally, the measured total heat generation over a charging/discharging cycle matched the measured net electrical energy loss. Overall, Ti 2 Nb 2 O 9 nanoparticles synthesized by the novel sol-gel method displayed excellent cycling performance and reduced heat generation as a fast-charging lithium-ion battery anode material. These features present major advantages for actual battery systems including larger energy and power densities, simpler thermal management, and enhanced safety.

25 ENERGY STORAGE↗

Thermodynamic modeling of double azeotropy systems

Azeotropes are boiling liquid mixtures which have identical vapor and liquid compositions. Known as polyazeotropy, azeotropic mixtures may exhibit more than one azeotrope at a given temperature or pressure. While the thermodynamic condition for azeotrope formation in vapor-liquid equilibrium is well established, thermodynamic modeling of mixtures exhibiting polyazeotropy remains challenging and prior modeling studies often failed to satisfactorily correlate the polyazeotropic behavior of associating systems. Based on the association NRTL model, this study presents successful correlation and analysis of double azeotrope formation for three diverse systems: strongly associating methanol + diethylamine binary, weakly associating ammonia + pentafluoroethane binary, and non-associating benzene + hexafluorobenzene binary systems. Furthermore, these systems exhibit polyazeotropic behavior as the temperature increases and approaches their Bancroft points.

42 ENGINEERING↗

Geologic hydrogen as an emerging fuel: experimental insights, thermodynamics, kinetics, and reactive transport modeling

Geologic hydrogen (GeoH 2 ) is emerging as a viable clean energy source. It is largely produced through serpentinization, a geological process in which ultramafic rocks react with water under suitable temperature and pressure. Here, this review synthesizes the current understanding of H 2 generation by serpentinization, with an emphasis on reaction mechanisms, kinetics, and thermodynamics, as well as on modeling flow and transport of reacting fluids in geological formations. We describe the role of mineral assemblages, such as olivine and pyroxene, fluid-rock interactions, and catalytic surfaces, in influencing GeoH 2 yield and reaction rates. By integrating models of reaction kinetics, subsurface reactive flow and transport, and the serpentinization process, and by accounting for the thermodynamic state of the system, this review aims to guide future GeoH 2 research and to evaluate the potential of natural hydrogen as a sustainable clean energy source.

Moradi, Rasoul [Univ. of Southern California, Los ↗

A probabilistic perspective on thermodynamic parameter uncertainties: Understanding aqueous speciation of mercury

Speciation plays an important role in determining the fate and transport of metals in terrestrial surface and subsurface systems. Equilibrium speciation modeling in aqueous systems relies on thermodynamic constants (log K values) of complexes, which are subject to uncertainties. In this study, using Monte Carlo (MC) simulations with Latin hypercube sampling (LHS) we systematically analyze the propagation of thermodynamic constant uncertainty through speciation modeling of an inorganic mercury-sulfide-chloride-water system. We find that seemingly small variances of the input log K normal distributions can lead to output species concentrations spanning multiple orders of magnitude, with highly skewed probability distributions. When equilibrium with mineral metacinnabar (β-HgS(s)) is neglected, the relative uncertainty of each output species is strongly positively correlated with the skewness of its concentration probability distribution, i.e., the lowest uncertainty occurs when the species concentration probability distribution is the most negatively skewed as its concentration approaches the total element concentration limit. The highest uncertainty in the identity of dominant species is located around species equivalence points. For cases where the mineral equilibrium is included, we derive analytical probability density functions for the log concentrations of all major species in the system. The mineral log K uncertainty is found to be an important contributor to all output concentration uncertainties. The analysis of combined effects of both pH and total sulfide concentration on output concentration uncertainties shows that high concentration uncertainties occur under highly sulfidic alkaline conditions and low uncertainties at low pH and sulfide concentrations. Finally, an analysis as presented here can distinguish between conditions that require a full uncertainty analysis and those for which the classical deterministic speciation modeling suffices.

58 GEOSCIENCES↗

Modeling of coupled thermodynamic and geomechanical performance of underground compressed air energy storage in lined rock caverns

We applied coupled nonisothermal, multiphase fluid flow and geomechanical numerical modeling to study the coupled thermodynamic and geomechanical performance of underground compressed air energy storage (CAES) in concrete-lined rock caverns. The paper focuses on CAES in lined caverns at relatively shallow depth (e.g., 100 m depth) in which a typical CAES operational pressure of 5 to 8 MPa is significantly higher than both ambient fluid pressure and in situ stress. We simulated a storage operation that included cyclic compression and decompression of air in the cavern, and investigated how pressure, temperature and stress evolve over several months of operation. We analyzed two different lining options, both with a 50 cm thick low permeability concrete lining, but in one case with an internal synthetic seal such as steel or rubber. For our simulated CAES system, the thermodynamic analysis showed that 96.7% of the energy injected during compression could be recovered during subsequent decompression, while 3.3% of the energy was lost by heat conduction to the surrounding media. Our geomechanical analysis showed that tensile effective stresses as high as 8 MPa could develop in the lining as a result of the air pressure exerted on the inner surface of the lining, whereas thermal stresses were relatively smaller and compressive. With the option of an internal synthetic seal, the maximum effective tensile stress was reduced from 8 to 5 MPa, but was still in substantial tension. We performed one simulation in which the tensile tangential stresses resulted in radial cracks and air leakage though the lining. This air leakage, however, was minor (about 0.16% of the air mass loss from one daily compression) in terms of CAES operational efficiency, and did not significantly impact the overall energy balance of the system. However, despite being minor in terms of energy balance, the air leakage resulted in a distinct pressure increase in the surrounding rock that could be quickly detected using pressure monitoring outside the concrete lining.

25 ENERGY STORAGE↗

Low temperature heat capacity and thermodynamic functions of anion bearing sodalites Na 8 Al 6 Si 6 O 24 X 2 (X = SO 4 , ReO 4 , Cl, I)

Heat capacities of sulfate, perrhenate, chloride, and iodide sodalites with the ideal formula Na 8 Al 6 Si 6 O 24 X 2 (X = SO 4 , ReO 4 , Cl, I) were measured from 2 K to 300 K using a Quantum Design Physical Property Measurement System (PPMS). From the heat capacity data, the standard thermodynamic functions were determined. All four sodalites undergo a phase transition below room temperature for which thermodynamic parameters were determined. Additionally, the heat capacity of one of the constituent compounds (NaReO 4 ) was measured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and thermodynamic effects of hydration in Na-zeolite A (LTA) from low-temperature heat capacity

Zeolite A (Linde Type A; LTA) is an industrially important porous mineral that has recently been shown to exhibit framework flexibility upon changes in hydration level. Here, to investigate the flexibility transition from a thermodynamic perspective, we have performed heat capacity measurements on sodium zeolite A at seven incremental hydration levels ranging from zero to equilibrium with ambient air. Excess low-frequency vibrations beyond the predictions of the Debye model are found in all samples, and the frequency of these vibrations increases as a function of hydration level. This suggests that an increase in hydration causes a decrease in at least one type of framework flexibility for sodium zeolite A. In addition, a subtle excess heat capacity contribution from 150 to 280 K is observed only for low and intermediate hydration levels, which may arise from a transformation tied to framework flexibility previously observed in zeolite A via gas absorption calorimetry. Values of the standard thermodynamic functions C p,m °, Δ 0 T S m °, Δ 0 T H m °, and Φ m ° are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical Verification of Equilibrium Thermodynamic Computations in Nuclear Fuel Performance Codes

There is an increasing desire to integrate thermodynamic computations directly into multi-physics nuclear fuel performance and safety codes. These computations provide, among other matters, boundary conditions in heat and mass transport modules in predicting fuel behaviour. Precision must be maintained in computations involving fission and activation products with very low concentrations which may nonetheless have significant radiological consequences. Also, there is the concern about the propagation of numerical errors in multi-physics codes. A method to numerically verify equilibrium thermodynamic computations is therefore necessary to satisfy rigorous quality assurance standards of the nuclear industry without significantly impeding computational performance. A technique is presented that can be applied to systems of any number of phases and system components. The technique is reliable and comprehensive in ensuring that all conceivable equilibrium constants have been satisfied without having to formulate each one of a potentially very large number.

Piro, Markus↗

Oxidation and Hydrogen Uptake in Zirconium, Zircaloy-2 and Zircaloy-4: Computational Thermodynamics and Ab Initio Calculations

Zirconium-based alloys Zircaloy-2 and Zircaloy-4 are widely used in nuclear industry as cladding materials for BWRs and PWRs, respectively. Over more than 60 years these materials displayed a very good combination of properties such as low neutron absorption, creep behavior, stress-corrosion cracking resistance, reduced hydrogen uptake, corrosion, and/or oxidation, especially in the case of Zircaloy-4. However, over the last couple of years energetic efforts were undertaken to improve their oxidation resistance during off-normal temperature excursions, as well as to further improve upon the already achieved levels of mechanical behavior and reduced hydrogen uptake. In order to facilitate the development of such novel materials, it is very important to achieve not only engineering control, but also scientific understanding of the underlying material degradation mechanisms, both in working conditions and in storage of spent nuclear fuel. This paper strives to contribute to these efforts by constructing the thermodynamic models of both alloys, constructing of the respective phase diagrams, and oxidation mechanisms. A special emphasis was placed upon the role of zirconium suboxides in hydrogen uptake reduction and the atomic mechanisms of oxidation. To that end, computational thermodynamics calculations were conducted concurrently with first-principles atomistic modeling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermodynamic assessment of the U–La–O system

The CALPHAD methodology was used to develop a thermodynamic assessment of the U-La-O system. The solid solution and liquid phases are described with the compound energy formalism and the partially ionic two-sublattice liquid model respectively. A density functional theory (DFT) calculation for the lattice stability of the fictive lanthanum oxide fluorite structure compound is used to determine the Gibbs energies for the La containing end-members in the CEF model for U 1-y La y O 2+x . Experimental thermodynamic and phase equilibria data were then used in optimizations to develop representations of the phases in the system that can be extended to include other actinide and fission products to develop multi-component models. The models that comprise this assessment very well reproduce experimentally determined oxygen potentials and the observed phase relations for the U-La-O system.

36 MATERIALS SCIENCE↗

The effect of Mn/Ni on thermodynamic properties of critical nucleus in Fe-Cu-Mn (Ni) ternary alloys

The aging- or radiation-induced hardening of Cu/Mn/Ni precipitates in Fe alloys is one of property degradation mechanisms in structural materials in nuclear reactors. Experiments show that aging or radiation leads the formation of Cu-rich precipitates, and the addition of Mn or Ni elements enhances the precipitation kinetics. In this study, the phase-field model coupled with the constrained string method have been applied to investigate the thermodynamic properties of critical nuclei such as the minimum energy path of Cu/Mn/Ni precipitation in Fe-Cu-Mn and Fe-Cu-Ni ternary alloys. The chemical free energies used in the model are taken from CALPHAD. The simulation results show that the formation of Cu/Mn/Ni clusters needs to overcome an energy barrier, and the precipitate has a Core-Shell structure. The thermodynamic properties of the critical nucleus are influenced by temperature and Cu/Mn/Ni overall concentrations, which are in accordance with the simulation results as well as the experimental observations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Synthesis and thermodynamics of uranium-incorporated α-Fe 2 O 3 nanoparticles

Hematite nanoparticles were synthesized with U(VI) in circumneutral water through a coprecipitation and hydrothermal treatment process. XRD, TEM, and EXAFS analyses reveal that uranium may aggregate along grain boundaries and occupy Fe sites within hematite. The described synthesis method produces crystalline, single-phase iron oxide nanoparticles absent of surface-bound uranyl complexes. EXAFS data were comparable to spectra from existing studies whose syntheses were more representative of naturally occurring, extended aging processes. Herein this work provides and validates an accelerated method of synthesizing uranium-immobilized iron oxide nanoparticles for further mechanistic studies. High temperature oxide melt solution calorimetry measurements were performed to calculate the thermodynamic stability of uranium-incorporated iron oxide nanoparticles. Increasing uranium content within hematite resulted in more positive formation enthalpies. Standard formation enthalpies of U x Fe 2–2x O 3 were as high as 76.88 ± 2.83 kJ/mol relative to their binary oxides, or -764.04 ± 3.74 kJ/mol relative to their constituent elements, at x = 0.037. Data on the thermodynamic stability of uranium retention pathways may assist in predicting waste uranyl remobilization, as well as in developing more effective methods to retain uranium captured from aqueous environments.

36 MATERIALS SCIENCE↗

Ab initio modeling and thermodynamics of hydrated plutonium oxalates

An ab initio study on the plutonium oxalate hydrates: Pu 2 (C 2 O 4 ) 3 ·10H 2 O and Pu(C 2 O 4 ) 2 ·6H 2 O, using PBE exchange-correlation with D3 dispersion correction and Hubbard correction for the plutonium atoms, was performed and compared to experimental vibrational spectral and thermodynamic property values. Here we demonstrated that this technique can accurately predict the experimental infrared spectra Pu(III) oxalate hydrate, as well as the Raman peak of PuO 2 (used to calculate the thermodynamic properties of the oxalates). For Pu(IV) oxalate hydrate we found that our predicted structure agreed qualitatively with PXRD measurements, the only available experimental determination of the structure. Using this method at standard temperature and pressure, we predicted standard enthalpies of formation of -6,755 kJ mol -1 and -3,923 kJ mol -1 and standard Gibbs free energy of formation of -5,899 kJ mol -1 and -3,386 kJ mol -1 for Pu 2 (C 2 O 4 ) 3 ·10H 2 O and Pu(C 2 O 4 ) 2 ·6H 2 O, respectively.

36 MATERIALS SCIENCE↗

Experimental determination and thermodynamic modeling of the Ni-Re binary system

The phase diagram of the Ni-Re binary system has been partially reinvestigated by chemical, structural and thermal characterization of the arc melted alloys. The experimental results obtained during the present investigation were combined with the literature data and a new phase diagram of the Ni-Re binary system is proposed. In comparison with the Ni-Re phase diagram proposed by Nash et al. in 1985 [1], significant differences in the homogeneity domains, freezing ranges and peritectic reaction temperature were evidenced. On the other hand, thermodynamic modeling of the studied system by using the new experimental information has also been carried out with the help of the CALPHAD method. The calculated Ni-Re phase diagram showed a good agreement with the selected experimental information. - Graphical abstract: Ni-Re phase diagram according to the present study. Highlights: Black-Right-Pointing-Pointer Re-investigation of the Ni-Re phase diagram. Black-Right-Pointing-Pointer Extended phase field of the hcp phase. Black-Right-Pointing-Pointer Different freezing ranges and peritectic reaction temperature. Black-Right-Pointing-Pointer Thermodynamic modeling of the studied system by using the CALPHAD method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic calculations of the thermodynamic properties of mixing for tetravalent metal dioxide solid solutions: (Zr, Th, Ce)O{sub 2}

The thermodynamic mixing properties for isometric Th{sub x}Ce{sub 1-x}O{sub 2}, Ce{sub x}Zr{sub 1-x}O{sub 2}, and Th{sub x}Zr{sub 1-x}O{sub 2} were determined using quantum-mechanical calculations and subsequent Monte-Carlo simulations. Although the Th{sub x}Ce{sub 1-x}O{sub 2} binary indicates exsolution below 600 K, the energy gain due to exsolution is small (E{sub exsoln}=1.5 kJ/(mol cations) at 200 K). The energy gain for exsolution is significant for the binaries containing Zr; at 1000 K, E{sub exsoln}=6 kJ/(mol cations) for the Ce{sub x}Zr{sub 1-x}O{sub 2} binary, and E{sub exsoln}=17 kJ/(mol cations) for the Th{sub x}Zr{sub 1-x}O{sub 2} binary. The binaries containing Zr have limited miscibility and cation ordering (at 200 K for x=0.5). At 1673 K, only 4.0 and 0.25 mol% ZrO{sub 2} can be incorporated into CeO{sub 2} and ThO{sub 2}, respectively. Solid-solution calculations for the tetragonal Th{sub x}Zr{sub 1-x}O{sub 2} binary show decreased mixing enthalpy due to the increased end-member stability of tetragonal ZrO{sub 2}. Inclusion of the monoclinic ZrO{sub 2} is predicted to further reduce the mixing enthalpy for binaries containing Zr. - Graphical abstract: Temperature-composition phase diagram showing miscibility gaps for the isometric Th{sub x}Ce{sub 1-x}O{sub 2}, isometric Ce{sub x}Zr{sub 1-x}O{sub 2}, isometric Th{sub x}Zr{sub 1-x}O{sub 2}, and tetragonal Th{sub x}Zr{sub 1-x}O{sub 2} binaries at low composition (0<x<0.025), where the solid solidus is an average of the linear and Margules approximations for the incorporation limit (x{sub inc}), and the dotted solidus lines are the Margules approximation (above the average) and the linear approximation (below the average). Highlights: Black-Right-Pointing-Pointer {Delta}H{sub mix}, {Delta}G{sub mix}, and {Delta}S{sub mix} of Th{sub x}Ce{sub 1-x}O{sub 2}, Th{sub x}Zr{sub 1-x}O{sub 2}, and Ce{sub x}Zr{sub 1-x}O{sub 2} binaries are calculated. Black-Right-Pointing-Pointer Cation ordering is identified at low T for binaries containing ZrO{sub 2}. Black-Right-Pointing-Pointer Phase diagrams are estimated based on DFT and Monte-Carlo calculations. Black-Right-Pointing-Pointer DFT and Monte-Carlo calculations are in agreement with experimental (and previous computational) results, where available. Black-Right-Pointing-Pointer Increased thermodynamic stability of monoclinic and tetragonal ZrO{sub 2} end-member affects solid solution binaries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic stability of elemental boron allotropes with varying numbers of interstitial atoms

Elemental boron exists in multiple allotropes, each characterized by structures containing icosahedral subunits. These structures have interstitial sites between the icosahedral subunits that are partially occupied. The number of atoms in the unit cell varies depending on the occupancy of these interstitial sites. Here we have investigated the thermodynamic stability of boron allotropes for different numbers of atoms in the unit cell by calculating the free energies, including the contribution of phonons. It has been found that β-rhombohedral boron is most stable with 107 atoms/cell at low temperatures, while it becomes most stable with 105 atoms/cell above 1700 K. This suggests the occurrence of a phase transition at this temperature, which could account for the large variation in the number of atoms in the unit cell for β-rhombohedral boron samples. α-tetragonal boron is consistently most stable with 52 atom/cell and becomes unstable with more than 52 atoms/cell. Similar to β-rhombohedral boron, β-tetragonal boron may undergo a phase transition between 192 and 190 atoms/cell configurations. However, the thermodynamic stability of pure β-tetragonal boron has been questioned in comparison with other allotropes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗