Search NASA⌕ Search

SEARCH · Search NASA

Results for “Two dimensional materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Planar tunneling spectroscopy on van der Waals superconductors with AlO x junction grown by atomic layer deposition

Here, we demonstrate a method for fabricating a high-quality AlO x -based planar tunnel junction using atomic layer deposition, integrated with the exfoliation and transfer techniques for van der Waals (vdW) materials. The tunneling spectroscopy results on exfoliated Bi 2 Sr 2 CaCu 2 O 8+δ and 2H-NbSe 2 vdW superconductors are highly consistent with that obtained by ultrahigh vacuum scanning tunneling spectroscopy on atomically clean surfaces. The planar tunneling devices enable high-precision spectroscopy over a wide range of temperatures and magnetic fields and reveal novel features and stark contrast between high-T C cuprates and conventional superconductors. This method represents a universally applicable technique for probing the electronic structure of various two-dimensional vdW materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field Programmable Gate Arrays for Enhancing the Speed and Energy Efficiency of Quantum Dynamics Simulations

We present the first application of field programmable gate arrays (FPGAs) as new, customizable hardware architectures for carrying out fast and energy-efficient quantum dynamics simulations of large chemical/material systems. Instead of tailoring the software to fixed hardware, which is the typical case for writing quantum chemistry code for central processing units (CPUs) and graphics processing units (GPUs), FPGAs allow us to directly customize the underlying hardware (even at the level of specific electrical signals in the circuit) to give a truly optimized computational performance for quantum dynamics calculations. By offloading the most intensive and repetitive calculations onto an FPGA, we show that the computational performance of our real-time electron dynamics calculations can even exceed that of optimized commercial mathematical libraries running on high-performance GPUs. In addition to this impressive computational speedup, we show that FPGAs are immensely energy-efficient and consume 4 times less energy than modern GPU or CPU architectures. These energy savings are a practical and important metric for supercomputing centers (many of which exceed over $1 million in power costs alone), as exascale computing capabilities become more widespread and commonplace. Taken together, the implementation techniques and performance metrics of our study demonstrate that FPGAs could play a promising role in upcoming quantum chemistry and materials science applications, particularly for the acceleration and energy-efficient execution of quantum dynamics calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bicrystallography-informed Frenkel–Kontorova model for interlayer dislocations in strained 2D heterostructures

In recent years, van der Waals (vdW) heterostructures and homostructures, which consist of stacks of two-dimensional (2D) materials, have risen to prominence due to their association with exotic quantum phenomena originating from correlated electronic states harbored by them. Atomistic scale relaxation effects play an extremely important role in the electronic scale quantum physics of these systems, providing means of manipulation of these materials and allowing them to be tailored for emergent technologies. We investigate such structural relaxation effects in this work using atomistic and mesoscale models, within the context of twisted bilayer graphene — a well-known heterostructure system that features moiré patterns arising from the lattices of the two graphene layers. For small twist angles, atomic relaxation effects in this system are associated with the natural emergence of interface dislocations or strain solitons, which result from the cyclic nature of the generalized stacking fault energy (GSFE), that measures the interface energy based on the relative movement of the two layers. Here, in this work, we first demonstrate using atomistic simulations that atomic reconstruction in bilayer graphene under a large twist also results from interface dislocations, although the Burgers vectors of such dislocations are considerably smaller than those observed in small-twist systems. To reveal the translational invariance of the heterointerface responsible for the formation of such dislocations, we derive the translational symmetry of the GSFE of a 2D heterostructure using the notions of coincident site lattices (CSLs) and displacement shift complete lattices (DSCLs). The workhorse for this exercise is a recently developed Smith normal form bicrystallography framework. Next, we construct a bicrystallography-informed and frame-invariant Frenkel–Kontorova model, which can predict the formation of strain solitons in arbitrary 2D heterostructures, and apply it to study a heterostrained, large-twist bilayer graphene system. Our mesoscale model is found to produce results consistent with atomistic simulations. We anticipate that the model will be invaluable in predicting structural relaxation and for providing insights into various heterostructure systems, especially in cases where the fundamental unit cell is large and therefore, atomistic simulations are computationally expensive.

2D heterostructures↗

Tailorable multifunctionalities in ultrathin 2D Bi-based layered supercell structures

Two-dimensional (2D) materials with robust ferromagnetic behavior have attracted great interest because of their potential applications in next-generation nanoelectronic devices. Aside from graphene and transition metal dichalcogenides, Bi-based layered oxide materials are a group of prospective candidates due to their superior room-temperature multiferroic response. In this work, an ultrathin Bi 3 Fe 2 Mn 2 O 10+δ layered supercell (BFMO322 LS) structure was deposited on an LaAlO 3 (LAO) (001) substrate using pulsed laser deposition. Microstructural analysis suggests that a layered supercell (LS) structure consisting of two-layer-thick Bi–O slabs and two-layer-thick Mn/Fe–O octahedra slabs was formed on top of the pseudo-perovskite interlayer (IL). A robust saturation magnetization value of 129 and 96 emu cm -3 is achieved in a 12.3 nm thick film in the in-plane (IP) and out-of-plane (OP) directions, respectively. The ferromagnetism, dielectric permittivity, and optical bandgap of the ultrathin BFMO films can be effectively tuned by thickness and morphology variation. In addition, the anisotropy of all ultrathin BFMO films switches from OP dominating to IP dominating as the thickness increases. This study demonstrates the ultrathin BFMO film with tunable multifunctionalities as a promising candidate for novel integrated spintronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel Pd 2 Se 3 Two-Dimensional Phase Driven by Interlayer Fusion in Layered PdSe 2

Two-dimensional (2D) materials are easily fabricated when their bulk form has a layered structure. The monolayer form in layered transition-metal dichalcogenides is typically the same as a single layer of the bulk material. Yet, PdSe 2 presents a puzzle. Its monolayer form has been theoretically shown to be stable, but there have been no reports that monolayer PdSe 2 has been fabricated. Here, combining atomic-scale imaging in a scanning transmission electron microscope and density functional theory, we show that the preferred monolayer form of this material amounts to a melding of two bulk monolayers accompanied by the emission of Se atoms so that the resulting stoichiometry is Pd 2 Se 3 . We further verify the interlayer melding mechanism by creating Se vacancies in situ in the layered PdSe 2 matrix using electron irradiation. The discovery that strong interlayer interactions can be induced by defects and lead to the formation of new 2D materials opens a new venue for the exploration of defect engineering and novel 2D structures.

36 MATERIALS SCIENCE↗

Temperature-Dependent Thermal Boundary Conductance of Monolayer MoS 2 by Raman Thermometry

The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS 2 with AlN and SiO 2 , using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in such experiments, which we characterize here for the first time above room temperature. We obtain TBC ~ 15 MW m –2 K –1 near room temperature, increasing as ~ T 0.65 in the range 300–600 K. The similar TBC of MoS 2 with the two substrates indicates that MoS 2 is the “softer” material with weaker phonon irradiance, and the relatively low TBC signifies that such interfaces present a key bottleneck in energy dissipation from 2D devices. As a result, our approach is needed to correctly perform Raman thermometry of 2D materials, and our findings are key for understanding energy coupling at the nanoscale.

2D materials↗

Shubnikov–de Haas oscillations of biaxial-strain-tuned superconductors in pulsed magnetic field up to 60 T

Two-dimensional (2D) materials have gained increasing prominence not only in fundamental research but also in daily applications. However, to fully harness their potential, it is crucial to optimize their properties with an external parameter and track the electronic structure simultaneously. Magnetotransport over a wide magnetic field range is a powerful method to probe the electronic structure and, for metallic 2D materials, quantum oscillations superimposed on the transport signals encode Fermi surface parameters. In this manuscript, we utilize biaxial strain as an external tuning parameter and investigate the effects of strain on the electronic properties of two quasi-2D superconductors, MoTe 2 and RbV 3 Sb 5 , by measuring their magnetoresistance in pulsed magnetic fields up to 60 T. With a careful selection of insulating substrates, we demonstrate the possibility of both the compressive and tensile biaxial strains imposed on MoTe 2 and RbV 3 Sb 5 , respectively. For both systems, the applied strain has led to superconducting critical temperature enhancement compared to their free-standing counterparts, proving the effectiveness of this biaxial strain method at cryogenic temperatures. Clear quantum oscillations in the magnetoresistance—the Shubnikov–de Haas (SdH) effect—are obtained in both samples. In strained MoTe 2 , the magnetoresistance exhibits a nearly quadratic dependence on the magnetic field and remains non-saturating even at the highest field, whereas in strained RbV 3 Sb 5 , two SdH frequencies showed a substantial enhancement in effective mass values, hinting at a possible enhancement of charge fluctuations. Our results demonstrate that combining biaxial strain and pulsed magnetic field paves the way for studying 2D materials under unprecedented conditions.

2D materials↗

Generation of out-of-plane ferroelectric behavior in a one-atom-thick monolayer

Ferroelectricity with out-of-plane polarization has so far been found in several two-dimensional (2D) materials, including monolayers comprising three to five planes of atoms, e.g. α-In 2 Se 3 and MoTe 2 . Here, we explore the generation of out-of-plane polarization within a one-atom-thick monolayer material, namely hexagonal boron nitride. We performed density-functional-theory calculations to explore inducing ferroelectric-like distortions through incorporation of isovalent substitutional impurities that are larger than the host atoms. This disparity in bond lengths causes a buckling of the h-BN, either up or down, which amounts to a dipole with two equivalent energies and opposing orientations. We tested several impurities to explore the magnitude of the induced dipole and the switching energy barrier for dipole inversion. The effects of strain, dipole–dipole interactions, and vertical heterostructures with graphene are further explored. Our results suggest a highly-tunable system with ground state antiferroelectricity and metastable ferroelectricity. Finally, we expect that this work will help foster new ways to include functionality in layered 2D-material-based applications.

36 MATERIALS SCIENCE↗

Shubnikov-de Haas oscillations of biaxial-strain-tuned superconductors in pulsed magnetic field up to 60 T

Two-dimensional (2D) materials have gained increasing prominence not only in fundamental research but also in daily applications. However, to fully harness their potential, it is crucial to optimize their properties with an external parameter and track the electronic structure simultaneously. Magnetotransport over a wide magnetic field range is a powerful method to probe the electronic structure and, for metallic 2D materials, quantum oscillations superimposed on the transport signals encode Fermi surface parameters. In this manuscript, we utilize biaxial strain as an external tuning parameter and investigate the effects of strain on the electronic properties of two quasi-2D superconductors, MoTe 2 and RbV 3 Sb 5 , by measuring their magnetoresistance in pulsed magnetic fields up to 60 T. With a careful selection of insulating substrates, we demonstrate the possibility of both the compressive and tensile biaxial strains imposed on MoTe 2 and RbV 3 Sb 5 , respectively. For both systems, the applied strain has led to superconducting critical temperature enhancement compared to their free-standing counterparts, proving the effectiveness of this biaxial strain method at cryogenic temperatures. Clear quantum oscillations in the magnetoresistance—the Shubnikov–de Haas (SdH) effect—are obtained in both samples. In strained MoTe 2 , the magnetoresistance exhibits a nearly quadratic dependence on the magnetic field and remains non-saturating even at the highest field, whereas in strained RbV 3 Sb 5 , two SdH frequencies showed a substantial enhancement in effective mass values, hinting at a possible enhancement of charge fluctuations. Our results demonstrate that combining biaxial strain and pulsed magnetic field paves the way for studying 2D materials under unprecedented conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE-EPSCoR Final Report Period: September 1, 2008- August 31, 2016

In this project, multifunctional nanostructured spintronic and magnetoelectric materials were investigated by experimental and computational efforts for applications in energy efficient electronic systems that integrate functionalities and thus have the potential to enable a new generation of faster responding devices and increased integration densities. The team systematically investigated transition metal (TM)-doped ZnO nanostructures, silicide nanorods, magnetoelectric oxides, and ferroelectric/ferromagnetic heterostructures. In what follows, we report the progress made by researchers during the above period in developing and understanding of 1) Spintronics nanostructures; 2) Resistive switching phenomenon in oxides for memory devices; 3) Magnetoelectric multiferroics; 4) Novel high-k gate oxides for logic devices; 5) Two dimensional (2D) materials; and 6) Theoretical studies in the above fields.

36 MATERIALS SCIENCE↗

Atom-by-atom fabrication with electron beams

Assembling matter atom-by-atom into functional devices is the ultimate goal of nanotechnology. The possibility of achieving this goal is intrinsically dependent on the ability to visualize matter at the atomic level, induce and control atomic-scale motion, facilitate and direct chemical reactions, and coordinate and guide fabrication processes towards desired structures atom-by-atom. In this Perspective, we summarize recent progress in chemical transformations, material alterations and atomic dynamics studies enabled by the converged, atomic-sized electron beam of an aberration-corrected scanning transmission electron microscope. We discuss how such top-down observations have led to the concept of controllable, beam-induced processes and then of bottom-up, atom-by-atom assembly via electron-beam control. Finally, the progress in this field, from electron-beam-induced material transformations to atomically precise doping and multi-atom assembly, is reviewed, as are the associated engineering, theoretical and big-data challenges.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning Interface Electronic Properties via Chiral Two‐Dimensional Metal‐Organic Frameworks

Control over structural symmetries in nanomaterials offers a powerful approach to engineer electronic properties. For instance, breaking of mirror symmetries in two-dimensional (2D) materials with a hexagonal lattice can lead to nontrivial electronic topologies and correlated-electron phenomena. Yet, the impact of structural chirality on the electronic properties of 2D materials and interfaces remains underexplored. Here, how chiral phases of a 2D metal-organic framework (MOF) with a hexagonal lattice—consisting of hexaazatriphenylene molecules coordinated to Cu atoms—scatter, confine, and perturb the Shockley surface state (SS) electrons of an underlying Ag(111) substrate is investigated. Via low-temperature scanning tunneling microscopy and spectroscopy, noncontact atomic force microscopy, and numerical calculations based on an electronic plane-wave expansion method, modifications of the Ag(111) SS band structure are shown and quantified, including gap openings and lifts of band degeneracies, driven exclusively by the structural chirality of the 2D MOF phases. These findings highlight how structural symmetries, in particular chirality, affect electronic states at material interfaces, expanding on the toolkit for designing 2D materials with tailored electronic properties.

band structure engineering↗

Influence of Disorder on the Electronic Properties and Magnetotransport of Ti 3 C 2 T x Single-Flake Devices

The exploration of MXenes for electronic applications is a rapidly growing field in materials science. However, most research has focused on MXene films, with only a limited number of studies addressing the characterization of single-flake devices. In this work, we investigate the electronic and magnetotransport properties of Ti 3 C 2 T x single-flake devices, exploring the influence of structural defectivity on their transport mechanisms. We show that negative magnetoresistance present at low temperatures in single flake samples arises from weak localization, which we analyze to extract the phase coherence length of single-layer and multi-layer flakes. The study of magnetoresistance for this metallic MXene shows that the material exhibits quantum transport phenomena when intrinsic electronic behavior dominates. Moreover, by increasing the defect density via thermal annealing in ultrahigh vacuum, we uncover and characterize the metal-to-disordered metal transition in Ti 3 C 2 T x , shedding light on new properties and enriching fundamental knowledge about MXenes.

MXenes↗

Multi-reward Reinforcement Learning Based Bond-Order Potential to Study Strain-Assisted Phase Transitions in Phosphorene

Here, we introduce a multi-reward reinforcement learning (RL) approach to train a flexible bond-order potential (BOP) for 2D phosphorene based on ab initio training data sets. Our approach is based on a continuous action space Monte Carlo tree search algorithm that is general and scalable and presents an efficient multiobjective optimization scheme for high-dimensional materials design problems. As a proof-of-concept, we deploy this scheme to parametrize multiple structural and dynamical properties of 2D phosphorene polymorphs. Our RL-trained BOP model adequately captures the structure, energetics, transformation barriers, equation of state, elastic constants, and phonon dispersions of various 2D P polymorphs. We use this model to probe the impact of temperature and strain rate on the phase transition from black (α-P) to blue phosphorene (β-P) through molecular dynamics simulations. A decrease in critical strain for this phase transition with increase in temperature is observed, and the underlying atomistic mechanisms are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Breaking of Inversion Symmetry and Interlayer Electronic Coupling in Bilayer Graphene Heterostructure by Structural Implementation of High Electric Displacement Fields

Controlling the interlayer coupling in two-dimensional (2D) materials generates novel electronic and topological phases. Its effective implementation is commonly done with a transverse electric field. However, phases generated by high displacement fields are elusive in this standard approach. Here, we introduce an exceptionally large displacement field by structural modification of a model system: AB-stacked bilayer graphene (BLG) on a SiC(0001) surface. We show that upon intercalation of gadolinium, electronic states in the top graphene layers exhibit a significant difference in the on-site potential energy, which effectively breaks the interlayer coupling between them. As a result, for energies close to the corresponding Dirac points, the BLG system behaves like two electronically isolated single graphene layers. This is proven by local scanning tunneling microscopy (STM)/spectroscopy, corroborated by density functional theory, tight binding, and multiprobe STM transport. Further, the work presents metal intercalation as a promising approach for the synthesis of 2D graphene heterostructures with electronic phases generated by giant displacement fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Conductivity and Thermopower near the 2D Metal-Insulator transition, Final Technical Report

STUDIES OF STRONGLY-INTERACTING 2D ELECTRON SYSTEMS – There is a great deal of current interest in the properties of systems in which the interaction between electrons (their potential energy) is large compared to their kinetic energy. We have investigated an apparent, unexpected metal-insulator transition inferred from the behavior of the temperature-dependence of the resistivity; moreover, detailed analysis of the behavior of the magnetoresistance suggests that the electrons’ effective mass diverges, supporting this scenario. Whether this is a true phase transition or crossover behavior has been strenuously debated over the past 20 years. Our measurements have now shown that the thermoelectric power of these 2D materials diverges at a finite density, providing clear evidence that this is, in fact, a phase transition to a new low-density phase which may be a precursor or a direct transition to the long sought-after electronic crystal predicted by Eugene Wigner in 1934.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing Variable Dependences in Hexagonal Boron Nitride Synthesis via Machine Learning

Wafer-scale monolayer two-dimensional (2D) materials have been realized by epitaxial chemical vapor deposition (CVD) in recent years. To scale up the synthesis of 2D materials, a systematic analysis of how the growth dynamics depend on the growth parameters is essential to unravel its mechanisms. However, the studies of CVD-grown 2D materials mostly adopted the control variate method and considered each parameter as an independent variable, which is not comprehensive for 2D materials growth optimization. Herein, we synthesized a representative 2D material, monolayer hexagonal boron nitride (hBN), on single-crystalline Cu (111) by epitaxial chemical vapor deposition and varied the growth parameters to regulate the hBN domain sizes. Furthermore, we explored the correlation between two growth parameters and provided the growth windows for large flake sizes by the Gaussian process. Here, this new analysis approach based on machine learning provides a more comprehensive understanding of the growth mechanism for 2D materials.

36 MATERIALS SCIENCE↗

Trends in Carbon, Oxygen, and Nitrogen Core in the X-ray Absorption Spectroscopy of Carbon Nanomaterials: A Guide for the Perplexed

Successful deployment of carbon nanomaterials in many applications, such as sensing, energy storage, and catalysis, relies on the selection, synthesis, and tailoring of the surface properties. Predictive analysis of the behavior is difficult without detailed knowledge of the differences between various carbon nanomaterials and their surface functionalization, thus leaving the selection process to traditional trial-and-error work. The present characterization fills this knowledge gap for carbon nanomaterial surface properties with respect to chemical states and functionalization. We present an overview of the chemical trends that can be extracted from soft X-ray absorption spectroscopy (XAS) spectra on an extended set of nonideal carbon nanomaterials as a function of sp 2 bonded carbon and bond ordering. In particular, the surface chemical state, the presence of long-range order in the carbon matrix, and a qualitative estimation of the amount of oxygen and nitrogen and their respective functional group formation on the material surface, together with the detailed material fabrication parameters, are reported. The results expand our understanding of carbon nanomaterial functionalization, which can support material selection in practice, provided that the specifications of the application are known.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗