Search NASA⌕ Search

SEARCH · Search NASA

Results for “Viewpoints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Numerical approximations to nonlinear conservation laws with locally varying time and space grids

Numerical approximations to the initial value problem for nonlinear systems of conservation laws are considered. The considered system is said to be hyperbolic when all eigenvalues of every real linear combination of the Jacobian matrices are real. Solutions may develop discontinuities in finite time, even when the initial data are smooth. In the investigation, explicit finite difference methods which use locally varying time grids are considered. The global CFL restriction is replaced by a local restriction. The numerical flux function is studied from a finite volume viewpoint, and a differencing technique is developed at interface points between regions of distinct time increments.

Osher, S.↗

Mass loss from evolved stars. II - Radio continuum emission and evolution to planetary nebulae

The radio continuum properties of cool evolved stars are investigated from the viewpoint of mass loss mechanisms and evolution through the planetary nebula stage. The VLA was used to search 32 high mass loss rate objects for 6-cm continuum emission, leading to the detection of NGC 7027, CRL 618, R Aqr, IRC + 10216, and Omicron Ceti. The evolution of such objects to the planetary nebula stage was studied by calculating the propagation of an ionization front into the remnant neutral envelope that is produced by continuous mass loss in the red giant stage. It is found that none of the stars has a hot, compact companion, except for the known cases of R Aqr and Mira, and that envelope fractional ionization is in most cases as small as less than about 0.001.

Spergel, D. N.↗

Life test results of hydride compressors for cryogenic refrigerators

A development status assessment is made, from the viewpoint of system durability, for the hydride compressors used in such cryogenic refrigerators as that of the JPL, which has operated at 29 K for 500 hours and at lower temperatures for over 1000. Attention is given to a novel hydride compressor unit which has operated through 35,000 cycles and exhibits negligible degradation of check valves, hydride particle size, and expansion valves. The power requirement for liquid hydrogen cooling can be halved through the use of recuperative hot water heating methods, making this system comparable in power use to liquid hydrogen refrigeration systems operating on electricity. Due to the lack of moving parts in hydride refrigerator designs, potential service lifetimes of many years, and perhaps decades, are being projected.

Jones, J. A.↗

Aerospace technology and commercial nuclear power; Proceedings of the Workshop Conference, Williamsburg, VA, November 18-20, 1981

An attempt has been made to compare the technologies, institutions and procedures of the aerospace and commercial nuclear power industries, in order to characterize similarities and contrasts as well as to identify the most fruitful means by which to transfer information, technology, and procedures between the two industries. The seven working groups involved in this study took as their topics powerplant design formulation and effectiveness, plant safety and operations, powerplant control technology and integration, economic and financial analyses, public relations, and the management of nuclear waste and spent fuel. Consequential differences are noted between the two industries in matters of certification and licencing procedures, assignment of responsibility for both safety and financial performance, and public viewpoint. Areas for beneficial interaction include systems management and control and safety system technology. No individual items are abstracted in this volume

Grey, J.↗

Hostile environmental conditions facing candidate alloys for the automotive Stirling engine

The materials research program in support of the Automotive Stirling Engine Project focuses on the hot heater head of the engine including the heater head tubes, cylinders, and regenerator housings, which are considered to be the most critical components from a materials viewpoint. The specific areas of investigation in the program involve hydrogen permeability testing, doping of the hydrogen working fluid to reduce permeability rates, oxidation/corrosion studies, creep-rupture evaluation, and assessing effects of hydrogen environment on mechanical properties. Emphasis is placed on the materials challenges that result from the use of hydrogen as the working fluid. Previously announced in STAR as N81-26236

Stephens, J. R.↗

Space Systems Technology Conference, Costa Mesa, CA, June 5-7, 1984, Technical Papers

Space station technology is considered along with a shuttle tethered satellite system development program, the development of advanced orbital maintenance/servicing techniques for EVA applications, human systems interfaces for space stations, materials and structures for space applications, progress in space nuclear reactor power systems technology development with the aid of the SP-100 Program, and the design of reliable power systems for communications satellites. Attention is given to problems and concepts of space station guidance and control, spacecraft data management hardware state-of-the-art, progressive autonomy, and automation in teleoperation from a man-machine interface viewpoint. A space exploration outlook is provided, and the space power systems of the early 21st century are discussed.

Source record↗

DC-10-10 winglet flight test program management

This paper discusses the McDonnell Douglas/NASA DC-10-10 winglet flight test program from a program management viewpoint. The program was conducted to obtain flight test data on the same airplane with and without winglets for direct comparison. As occasionally happens in flight tests, unexpected events occur. This program was encumbered by a low-speed buffet anomaly that required several configuration modifications before satisfactory performance could be attained. This paper relates the management techniques utilized to accommodate the unplanned increases in program scope and still complete the program on time and below the budgeted cost.

Agar, J. R.↗

On initial orbit determination

The classical methods of initial orbit determination are brought together within a larger viewpoint. This new synthesis stresses that all such techniques follow one of three approaches. Either they seek to compute the orbital element set, or its equivalent, by attacking the differential equations of motion (Laplace), the first integrals of the equations of motion (Taff), or the solution itself (Gauss). The particular technique pursued within a given type of approach should depend upon the nature of the observational data, the amount of a priori information one is willing to presume, and the object of the exercise. This might be a binary star system, a moon, a minor planet, or an artificial satellite. The efficacy of some algorithms for each approach is discussed briefly. Unfortunately, none of them work very well. Extensions of these techniques to radars or laser radars are trivial and have provided no new insights into the overall problem.

Taff, L. G.↗

Stirling material technology

The Stirling engine is an external combustion engine that offers the advantage of high fuel economy, low emissions, low noise, and low vibrations compared to current internal combustion automotive engines. The most critical component from a materials viewpoint is the heater head consisting of the cylinders, heating tubes, and regenerator housing. Materials requirements for the heater head include compatibility with hydrogen, resistance to hydrogen permeation, high temperature oxidation/corrosion resistance, and high temperature creep-rupture and fatigue properties. A materials research and technology program identified the wrought alloys CG-27 and 12RN72 and the cast alloys XF-818, NASAUT 4G-A1, and NASACC-1 as candidate replacements for the cobalt containing alloys used in current prototype engines. It is concluded that manufacture of the engine is feasible from low cost iron-base alloys rather than the cobalt alloys used in prototype engines. Results of research that lead to this conclusion are presented.

Titran, R. H.↗

Missions/Planning Panel

A panel discussion was held to develop a viewpoint of space power technology needs and state of readiness for future mission scenarios. Among the points made in the discussion, it was agreed that missions, particularly the far term ones, do serve to drive technology; however, as the missions become nearer term, issues of schedule and cost severely limit the willingness to accept risk. There are, in fact, no rewards to a mission manager for introducing new technology. Mission downscaling is the usual response to technology limitations. All panelists agreed that there exists a serious gap between when technologists feel their job is done and what mission managers need for decision. Typically a two to three year engineering development gap exists. It is essential to take technologies to the engineering model level and conduct a flight demonstration to close this gap. All agreed that increased effort should be made to achieve stronger interactions between planners and technologists and that workshops like the present one are a step in the right direction. Technologists need mission credibility and vice versa.

Fordyce, J. S.↗

High Temperature Thermoelectric Energy Conversion

The electronic and thermal transport properties of the most promising material systems for high temperature thermoelectric energy conversion are discussed from a theoretical and experimental viewpoint. Rare earth chalcogenides and boron-rich borides are considered in terms of thermal conductivity and transport mechanisms. Rare earth chalcogenides are generally n-type semiconductors and boron-rich borides are generally p-type semiconductors.

Wood, C.↗

Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally homogeneous surface-roughness treatment for rotor and stator elements

A theory is presented, based on a simple modification of Hirs' turbulent lubrication equations, to account for different but directionally-homogeneous surface roughness treatments for the rotor and stator of annular seals. The theoretical results agree with von Pragenau's predictions that a damper seal which uses a smooth rotor and a rough stator yields more net damping than a conventional seal which has the same roughness for both the rotor and stator. Experimental results for four stators confirm that properly-designed roughened stators yield higher net damping values and substantially less leakage than seals with smooth surfaces. The best seal from both damping and leakage viewpoints uses a round-hole-pattern stator. Initial results for this stator suggest that, within limits, seals can be designed to yield specified ratios of stiffness to damping.

Childs, D. W.↗

Simulation evaluation of two VTOL control/display systems in IMC approach and shipboard landing

Two control/display systems, which differed in overall complexity but were both designed for VTOL flight operations to and from small ships in instrument meteorological conditions (IMC), were tested using the Ames Flight Simulator for Advanced Aircraft (FSAA). Both systems have attitude command in transition and horizontal-velocity command in hover; the more complex system also has longitudinal-acceleration and flightpath-angle command in transition, and vertical-velocity command in hover. The most important overall distinction between the two systems for the viewpoint of implementation is that in one - the more complex - engine power and nozzle position are operated indirectly through flight controllers, whereas in the other they are operated directly by the pilot. Simulated landings were made on a moving model of a DD 963 Spruance-class destroyer. Acceptable transitions can be performed in turbulence of 3 m/sec rms using either system. Acceptable landings up to sea state 6 can be performed using the more complex system, and up to sea state 5 using the other system.

Merrick, V. K.↗

Profile design for wings and propellers

It has now become customary to develop profiles for wings and propellers for a given employment of the aircraft. This is possible because methods and computers are available to study an entire series of variants in comparatively short time. The basic viewpoints for profile design are presented. It is shown that laminarization has its advantages in almost all cases, including the design of a turbine blade and the design of the profile of an airliner. The requirements which profiles have to satisfy are discussed along with the possibilities for increasing lift on profiles.

Quast, A.↗

Ocean Modeling of the North Atlantic

Present modeling of the North Atlantic is inadequate and can be improved in a number of ways. A number of important physical processes are listed in five categories from the viewpoints of how they are treated in isolation, how they are usually represented in present ocean basin models, and how they may be better represented in future models. In the first two categories of vertical boundary processes and internal vertical mixing, parameterizations exist which can easily be incorporated into models and which will have important effects on the simulated structure of the North Atlantic. For the third catagory (mesoscale eddy effects), adequate parameterizations do not exist; but the order of magnitude of the effects is known from observational and process-model studies. A horizontal grid spacing of 100 km or less in required to allow parameterizations with this order of magnitude, as well as to resolve the time-averaged ocean fields. In the fourth category of large scale transports improvements are suggested by way of increased vertical resolution and by the requirement that lateral mixing due to eddies takes place on isopycnal surfaces. Model incorporation of the latter phenomenta is underway. In the fifth category of miscellaneous high-latitude processes, formulations for the treatment of sea ice are available for use. However, the treatment of gravitational instability, which is crucial to deepwater formation in the Atlantic Ocean, will require additional refinements to account for the unresolved physics of chimney formations in the open ocean and buoyant plumes near ocean boundaries.

Albert J Semtner↗

Real-Time Multiprocessor Programming Language (RTMPL) user's manual

A real-time multiprocessor programming language (RTMPL) has been developed to provide for high-order programming of real-time simulations on systems of distributed computers. RTMPL is a structured, engineering-oriented language. The RTMPL utility supports a variety of multiprocessor configurations and types by generating assembly language programs according to user-specified targeting information. Many programming functions are assumed by the utility (e.g., data transfer and scaling) to reduce the programming chore. This manual describes RTMPL from a user's viewpoint. Source generation, applications, utility operation, and utility output are detailed. An example simulation is generated to illustrate many RTMPL features.

Arpasi, D. J.↗

Space station configuration and flight dynamics identification

The Space Station will be assembled in low earth orbit by a combination of deployable and space erectable modules that are progressively integrated during successive flights of the Shuttle. The crew assisted space construction will result in a configuration which is a large scale composite of structural elements having connectivity with a wide range of possible end conditions and imprecisely known dynamic characteristics. The generic applications of Flight Dynamics Identification to the candidate Space Station configurations currently under consideration are described. Identification functions are categorized, and the various methods for extracting parameter estimates are correlated with the sensing of parameter estimates are correlated with the sensing of specific characteristics of interest to both engineering subsystems and users of the Station's commercial and scientific facilities. Onboard implementation architecture and constraints are discussed from the viewpoint of maximizing integration of the Identification process with the flight subsystem's data and signal flow.

Metter, E.↗

Gravity waves from the stratosphere to the mesosphere, part 1.3B

The propagation of gravity waves from the stratosphere to the mesosphere has important implications both for observers and those who are attempting to parameterize wave breaking in global models. As they propagate from the tropopause to their breaking level (here, assumed to be the mesosphere), gravity waves can encounter a refractive environment since the vertical group velocity is a function of the background wind. They may be focussed or scattered or dissipated before reaching the mesosphere. It is even conceivable that gravity waves may break stop breaking, and begin breaking again at high altitudes with a resultant loss of wave energy in the intervening region. From a modeling viewpoint, the important concern for large-scale flows is the total upward flux of gravity wave (pseudo) momentum entering the stratosphere and mesosphere. The refraction of gravity waves also presents a difficult problem for observers since waves passing through the tropopause may arrive a thousand kilometers upstream in the mesosphere. Since mesosphere - stratosphere - troposphere (MST) radars sense tropospheric and mesospheric conditions most accurately, they are ideally suited to assess the total gravity-wave flux through the tropopause and stratospause. Networks of radars making coordinated measurements may be required to accurately determine the upward flux of momentum as well as the flux convergence between layers.

Schoeberl, M. R.↗