Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Thermal history sensors for non-destructive temperature measurements in harsh environments

The operating temperature is a critical physical parameter in many engineering applications, however, can be very challenging to measure in certain environments, particularly when access is limited or on rotating components. A new quantitative non-destructive temperature measurement technique has been proposed which relies on thermally induced permanent changes in ceramic phosphors. This technique has several distinct advantages over current methods for many different applications. The robust ceramic material stores the temperature information allowing long term thermal exposures in harsh environment to be measured at a convenient time. Additionally, rare earth dopants make the ceramic phosphorescent so that the temperature information can be interpreted by automated interrogation of the phosphorescent light. This technique has been demonstrated by application of YAG doped with dysprosium and europium as coatings through the air-plasma spray process. Either material can be used to measure temperature over a wide range, namely between 300°C and 900°C. Furthermore, results show that the material records the peak exposure temperature and prolonged exposure at lower temperatures would have no effect on the temperature measurement. This indicates that these materials could be used to measure peak operating temperatures in long-term testing.

36 MATERIALS SCIENCE↗

Strengthening of C/SiC Composites by Electrophoretic Deposition of CNTs on a SiC Coating

The current study reports the enhancement of mechanical properties of carbon fiber-reinforced silicon carbide ceramic matrix composites (C/SiC CMCs) by the application of a carbon nanotube/silicon carbide (CNT/SiC) coating. CNTs were deposited on the surfaces of C/SiC composites using electrophoretic deposition (EPD), after which infiltration by SiC was achieved through a chemical vapor infiltration process. An EPD duration of 5 min was associated with a 40% increase in the ultimate flexural strength relative to that of composites with a pure SiC coating. The observed enhancement was rationalized by the microstructural observations of SiC infiltration into the porous CNT morphology and the subsequent formation of CNT/SiC layers on the surfaces of the composites and by the inherent toughness of the SiC whiskers. The flexural strength decreased with EPD durations greater than 5 min due to the formation of thick CNT meshes, which decreased the open porosity and thereby obstructed further SiC infiltration. This is a viable methodology for the improvement of mechanical properties of CMCs by the introduction of a ceramic coating containing CNT.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermoelectric conversion via laser-induced voltage in highly textured polycrystalline Na{sub x}CoO{sub 2} ceramic

We have studied and analyzed the laser-induced voltage effect in highly c-axis-oriented polycrystalline Na{sub x}CoO{sub 2}. The textured and layered stacking Na{sub x}CoO{sub 2} (x {approx} 0.7) bulks were prepared by a solid-state reaction process. Under the irradiation on Na{sub 0.67}CoO{sub 2} bulk surface with pulsed laser ({lambda} = 248 nm), the induced voltage signals were observed on the inclined surface with rise time 30 ns-43 ns and peak voltage 200 mV-500 mV; the voltage peak values show a linear dependence of laser energy densities. The crystal grains orientation plays a critical role in voltage peak value whether in film or texture bulk. The transverse voltage signal brings the information of thermoelectric anisotropy. In Na{sub x}CoO{sub 2} band structure, the Fermi surface is different in the ab plane and along the c axis, leading to anisotropy of Seebeck coefficient. Additionally, the artificial structure of the inclined surface for highly textured bulk enables us to obtain a transverse voltage on inclined surface. These results demonstrated the layered textured bulk has potential applications in waste-heat conversion via transverse thermoelectric effect.

36 MATERIALS SCIENCE↗

Progress in development of SiC-based joints resistant to neutron irradiation

This study fills a knowledge gap regarding neutron-irradiation resistance of SiC joints for nuclear applications, by investigating high-dose neutron irradiation effects on the strength of selected joints and low-dose neutron irradiation effects on recently developed joints fabricated by state of the art processing methods. The joining methods used for the high-dose radiation study included pressure-assisted liquid-phase sintering (LPS) of SiC nanopowder, pressureless calcia-alumina glass ceramics joining, and reaction sintering of Ti-Si-C powders with hot-pressing. The joints were neutron-irradiated at 530 °C to 20 displacements per atom (dpa). Other joining methods included low-pressure LPS of cold-pressed SiC green body, pressureless reaction sintered Ti-Si-C powder joint, spark plasma–sintered Ti diffusion bond, and hot-pressed Ti diffusion bond, which were irradiated at ~500 °C to ~2 dpa. There was no notable degradation of torsional strengths of the joints following the high-dose irradiation. The irradiation-induced degradation at low neutron dose was highly dependent on joint type.

36 MATERIALS SCIENCE↗

Novel yellowish-green emitting luminescence in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} phosphor

Graphical abstract: The phosphor has two separated emission centers with the dependent emission intensity on Eu{sup 2+} doping. There is a red-shift in the emission due to energy transfer with increasing the Eu{sup 2+}-doping. - Highlights: • Green-origin-emitting phosphors of Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} were firstly prepared by chemical sol–gel method. • The tunable luminescence color was realized by the changing Eu{sup 2+}-doping in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}. • Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers with the emission depending on Eu{sup 2+} doping. • Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} phosphor has an excellent thermal stability on the temperature quenching. - Abstract: Color tunable green-origin-emitting phosphor of Eu{sup 2+}-doped phosphate-silicate Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} was prepared by chemical sol–gel method. The X-ray powder diffraction, the photoluminescence excitation and emission spectra, time resolved spectra, and thermal stability were measured. The excitation spectra can well match with the emission light of near UV-LED chips (360–400 nm). The tunable luminescence was realized by changing Eu{sup 2+}-doping concentration. Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers, which were suggested to originate from two Ca{sup 2+} sites in the host. With increasing Eu{sup 2+} doping concentrations, the green emission band shifts to long wavelength. Energy transfer between the two different Eu{sup 2+} ions is discussed by analyzing the photoluminescence excitation and emission spectra, concentration-dependent luminescence intensity, and lifetimes. The dependence of the luminescence intensity of Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} on temperatures was measured. The activation energy (ΔE) for thermal quenching was reported.

36 MATERIALS SCIENCE↗

Lithium stoichiometry of solid electrolytes based on tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}

Graphical abstract: - Highlights: • We prepared Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) by the citrate–nitrate method. • We studied phase composition and conductivity of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x}. • We proposed a simple method to determine the carbonate impurity content in the solid electrolytes. • The synthesized solid electrolytes Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 7–9) have 1.32–3.49 wt.% Li{sub 2}CO{sub 3}. • The composition with x = 9 has high total conductivity, 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. - Abstract: Samples of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) were synthesized with the citrate–nitrate method. Neutron diffraction studies have shown the presence of lithium carbonate impurities in the synthesized compounds. We propose a simple and effective method to determine the carbonate impurity content in the solid electrolytes. The technique is based on the measurement of the carbon dioxide volume produced from the interaction of the investigated material with acid. Determined in this way, the content of Li{sub 2}CO{sub 3} in the synthesized electrolytes Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}, Li{sub 8}La{sub 3}Zr{sub 2}O{sub 12.5} and Li{sub 9}La{sub 3}Zr{sub 2}O{sub 13} are 1.32 ± 0.04, 1.95 ± 0.06 and 3.49 ± 0.10 wt.%, respectively. From the obtained data, the actual lithium content per formula unit of complex oxide was calculated for the synthesized compounds. The composition with x = 9 had the highest total conductivity, σ = 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. All the investigated electrolytes have an activation energy of approximately 50 kJ mol{sup −1}.

36 MATERIALS SCIENCE↗

Transitions in Wetting Behavior Between Liquid Ag-CuO Alloys and Al2O3Substrates

Reactive air brazing (RAB) is a method for joining ceramics with applications in high temperature technologies such as gas separation and solid oxide fuel cell (SOFC) components. An understanding of wetting behavior is critical for optimization of the brazing process. In the current study, the wetting behavior of Ag-CuO on Al2O3 was evaluated. Based on in-situ contact angle measurements, three regions of wetting behavior were identified in the composition range of 0 to 40 mol% CuO. The first transition, a 20° decrease between 2 mol% CuO and 4 mol% CuO, was attributed to the liquid composition miscibility gap, and the second, a 10° decrease between 10 mol% CuO and 20 mol% CuO, was hypothesized to be dominated by the formation of a reaction product. Small, discontinuous reaction regions were identified via electron probe microanalysis (EPMA) but could not be verified with X-ray photoelectron spectroscopy analysis (XPS).

air brazing↗

Microstructure and Electrical Transport Properties of Bi{sub 3}TiNbO{sub 9} High-Temperature Piezoceramics

High-density ceramic samples of the Bi{sub 3}TiNbO{sub 9} ferroelectric phase with a layered perovskite-like structure have been produced by tape casting slurry technology and hot pressing processes. The samples have been characterized by X-ray diffraction and dielectric, piezoelectric, and pyroelectric measurements. The results demonstrate that the samples have a well-defined texture due to the preferential orientation of the basal planes of their platelike grains across the pressing axis or along the film casting direction. The Curie temperature of the samples has been determined to be T{sub C} = 1180 K. The samples have anisotropic electrical transport characteristics. Their piezoelectric constants d{sub 33} in directions perpendicular and parallel to the texture plane is 22 and 5 pC/N, respectively. The conclusion has been drawn that the synthesized materials are potentially attractive for producing high-temperature piezoelectric elements.

36 MATERIALS SCIENCE↗

Potentiometric Sensor for Real-Time Remote Surveillance of Actinides in Molten Salts

A potentiometric sensor is being developed at the Idaho National Laboratory for real-time remote surveillance of actinides during electrorefining of spent nuclear fuel. During electrorefining, fuel in metallic form is oxidized at the anode while refined uranium metal is reduced at the cathode in a high temperature electrochemical cell containing LiCl-KCl-UCl3 electrolyte. Actinides present in the fuel chemically react with UCl3 and form stable metal chlorides that accumulate in the electrolyte. This sensor will be used for process control and safeguarding of activities in the electrorefiner by monitoring the concentrations of actinides in the electrolyte. The work presented focuses on developing a solid-state cation conducting ceramic sensor for detecting varying concentrations of trivalent actinide metal cations in eutectic LiCl-KCl molten salt. To understand the basic mechanisms for actinide sensor applications in molten salts, gadolinium was used as a surrogate for actinides. The ß?-Al2O3 was selected as the solid-state electrolyte for sensor fabrication based on cationic conductivity and other factors. In the present work Gd3+-ß?-Al2O3 was prepared by ion exchange reactions between trivalent Gd3+ from GdCl3 and K+-, Na+-, and Sr2+-ß?-Al2O3 precursors. Scanning electron microscopy (SEM) was used for characterization of Gd3+-ß?-Al2O3 samples. Microfocus X-ray Diffraction (µ-XRD) was used in conjunction with SEM energy dispersive X-ray spectroscopy (EDS) to identify phase content and elemental composition. The Gd3+-ß?-Al2O3 materials were tested for mechanical and chemical stability by exposing them to molten LiCl-KCl based salts. The effect of annealing on the exchanged material was studied to determine improvements in material integrity post ion exchange. The stability of the ß?-Al2O3 phase after annealing was verified by µ-XRD. Preliminary sensor tests with different assembly designs will also be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determination of Natural Beryllium (Be) in Soil and Swipe Samples Utilizing Yttrium/Beryllium Ratio

1. Objective: A method to determine whether beryllium (Be) components in surface swipe samples are from a natural source is needed. 2. Methods: Soil samples and surface swipes from area facilities were analyzed for marker elements to identify source pathways for beryllium (Be). To be useful, the natural marker element must be present at reasonably consistent levels across the site, must correlate with the Be concentration, and not have the potential to be present from non-natural sources. 3. Results: The research on marker elements used to identify source pathways for beryllium (Be) concentrations demonstrates a clear correlation between Be and yttrium (Y) in natural soils on the Nevada National Security Site. The Y/Be ratio is proposed as a method to characterize the source of Be in soil and surface swipe samples and to aid in recommendations for follow up actions. Swipe samples are analyzed using an ICP/MS method and compared with results from soil samples. Natural soil constituent levels and the Y/Be Ratio range is determined for the occupied and historical facilities and surrounding areas. Y/Be ratios within the statistical range established indicate the Be is from a natural source. Y/Be ratios lower than this range indicate the presence of another Be source, and may then be correlated to alloy, ceramic, or other operational sources by the ratios of copper, nickel, cobalt, uranium, and/or niobium. Example case studies of evaluations of buildings with historical operational beryllium usage, current ongoing technical processes, and heavy equipment used in large building demolitions are included demonstrating the value of the ratio approach. 4. Conclusions: This differentiation is valuable as there is no known correlation between natural beryllium in soil and beryllium disease.

54 ENVIRONMENTAL SCIENCES↗

Maturing ceramic am and establishing a qualification framework at los alamos national laboratory

We successfully produced specimens made from porcelain resin (Tethon3D) in three different orientations (Z=45mm, Z=4mm and Z=3mm) without any cracks or delamination, both before and after post-processing. Four-point flexural tests were conducted on these specimens. Among the three orientations, specimens printed in the Z=4mm direction showed the best flexural strength, followed by Z=3mm and Z=45mm.

36 MATERIALS SCIENCE↗

Impedance Spectroscopy Study of the Electrical Properties of Cation-Substituted Barium Hexaaluminate Ceramics

We report on the behavior of frequency and temperature dependences of the impedance of a measuring cell in the form of a parallel-plate capacitor filled with barium hexaaluminate ceramics with four aluminum cations replaced by iron (BaO · 2Fe{sub 2}O{sub 3} · 4Al{sub 2}O{sub 3}). The measurements have been performed in the frequency range of 0.5–10{sup 8} Hz at temperatures of 20-375°C. A technique for determining the electrical properties of the investigated ceramics is proposed, which is based on an equivalent electric circuit allowing the recorded impedance spectra to be approximated with sufficiently high accuracy. The established spectral features are indicative of the presence of two electric relaxation times different from each other by three orders of magnitude. This fact is explained by the difference between the charge transport processes in the bulk of crystallites and thin intercrystallite spacers, for which the charge activation energies have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Influence of the Cobalt Content on the Strength Properties of Tungsten Carbide Ceramics under Dynamic Loads

Based on the registration and analysis of the full wave profiles, the Hugoniot elastic limit and spall strength of ceramics based on tungsten carbide with different cobalt content are measured. We also study the influence of the cobalt content on the mechanical characteristics of tungsten carbide such as hardness, fracture strength, Young’s modulus, shear modulus, and sound velocity. It is shown that in the process of spalling, the failure stresses grow and the dynamic elastic limit decreases almost linearly within the scatter of their values with growing cobalt content; moreover, the value of the Hugoniot elastic limit is abruptly practically halved as the cobalt content grows from 0 to 2 wt %.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of high level nuclear waste glass samples following extended melter idling

The Savannah River Site Defense Waste Processing Facility (DWPF) melter was recently idled with glass remaining in the melt pool and riser for approximately three months. This situation presented a unique opportunity to collect and analyze glass samples since outages of this duration are uncommon. The objective of this study was to obtain insight into the potential for crystal formation in the glass resulting from an extended idling period. The results will be used to support development of a crystal-tolerant approach for operation of the high-level waste melter at the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Two glass pour stream samples were collected from DWPF when the melter was restarted after idling for three months. The samples did not contain crystallization that was detectible by X-ray diffraction. Electron microscopy identified occasional spinel and noble metal crystals of no practical significance. Occasional platinum particles were observed by microscopy as an artifact of the sample collection method. Reduction/oxidation measurements showed that the pour stream glasses were fully oxidized, which was expected after the extended idling period. Chemical analysis of the pour stream glasses revealed slight differences in the concentrations of some oxides relative to analyses of the melter feed composition prior to the idling period. While these differences may be within the analytical error of the laboratories, the trends indicate that there may have been some amount of volatility associated with some of the glass components, and that there may have been interaction of the glass with the refractory components of the melter. These changes in composition, although small, can be attributed to the idling of the melter for an extended period. The changes in glass composition resulted in a 70-100 °C increase in the predicted spinel liquidus temperature (TL) for the pour stream glass samples relative to the analysis of the melter feed prior to the outage. This indicates that the potential for spinel crystallization increased as a result of idling for an extended period. However, the predicted TL of the pour stream glasses remained 150-200 °C below the mean melt pool temperature of about 1125 °C during the idling period. Given the change in predicted TL over the three month outage, the results indicate that it is important to have a thorough understanding of spinel crystallization within the melter for WTP to operate with a volume percent crystallization constraint. This knowledge will enable process control routines to be developed that avoid bulk crystallization in the melter and allow for recovery from off-normal events. The current WTP crystal-tolerant glass program will develop an improved understanding of spinel crystallization in the WTP melter to allow for operation at maximum waste loading in glass composition systems limited by predictions of spinel crystallization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reduced-temperature processing and consolidation of ultra-refractory Ta4HfC5

TaC, HfC, and WC powders were subjected to high-energy milling and hot pressing to produce Ta4HfC5, a composite of Ta(4)HfC5 + 30 vol.% WC, and a composite of Ta4HfC5 + 50 vol.% WC. Sub-micron powders were examined after four different milling intervals prior to hot pressing. XRD was used to verify proper phase formation. SEM, relative density, and hardness measurements were used to examine the resulting phases. Hot pressed compacts of Ta4HfC5 showed densification as high as 98.6% along with Vickers hardness values of 21.4 GPa. Similarly, Ta4HfC5 + 30 vol.% WC exhibited 99% densification with a Vickers hardness of 22.5 GPa. These levels of densification were achieved at 1500 degrees C, which is lower than any previously reported sintering temperature for Ta4HfC5. Microhardness values measured in this study were higher than those previously reported for Ta4HfC5. The WC additions to Ta4HfC5 were found to improve densification and increase microhardness. (C) 2013 Elsevier Ltd. All rights reserved.

36 MATERIALS SCIENCE↗