Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Decomposition of forest products buried in landfills

Highlights: • This study tracked chemical changes of wood and paper in landfills. • A decomposition index was developed to quantify carbohydrate biodegradation. • Newsprint biodegradation as measured here is greater than previous reports. • The field results correlate well with previous laboratory measurements. - Abstract: The objective of this study was to investigate the decomposition of selected wood and paper products in landfills. The decomposition of these products under anaerobic landfill conditions results in the generation of biogenic carbon dioxide and methane, while the un-decomposed portion represents a biogenic carbon sink. Information on the decomposition of these municipal waste components is used to estimate national methane emissions inventories, for attribution of carbon storage credits, and to assess the life-cycle greenhouse gas impacts of wood and paper products. Hardwood (HW), softwood (SW), plywood (PW), oriented strand board (OSB), particleboard (PB), medium-density fiberboard (MDF), newsprint (NP), corrugated container (CC) and copy paper (CP) were buried in landfills operated with leachate recirculation, and were excavated after approximately 1.5 and 2.5 yr. Samples were analyzed for cellulose (C), hemicellulose (H), lignin (L), volatile solids (VS), and organic carbon (OC). A holocellulose decomposition index (HOD) and carbon storage factor (CSF) were calculated to evaluate the extent of solids decomposition and carbon storage. Samples of OSB made from HW exhibited cellulose plus hemicellulose (C + H) loss of up to 38%, while loss for the other wood types was 0–10% in most samples. The C + H loss was up to 81%, 95% and 96% for NP, CP and CC, respectively. The CSFs for wood and paper samples ranged from 0.34 to 0.47 and 0.02 to 0.27 g OC g{sup −1} dry material, respectively. These results, in general, correlated well with an earlier laboratory-scale study, though NP and CC decomposition measured in this study were higher than previously reported.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A CLOSER VIEW OF THE RADIO-FIR CORRELATION: DISENTANGLING THE CONTRIBUTIONS OF STAR FORMATION AND ACTIVE GALACTIC NUCLEUS ACTIVITY

We extend the Unified Radio Catalog, a catalog of sources detected by various (NVSS, FIRST, WENSS, GB6) radio surveys, and SDSS, to IR wavelengths by matching it to the IRAS Point and Faint Source catalogs. By fitting each NVSS-selected galaxy's NUV-NIR spectral energy distribution (SED) with stellar population synthesis models we add to the catalog star formation rates (SFRs), stellar masses, and attenuations. We further add information about optical emission-line properties for NVSS-selected galaxies with available SDSS spectroscopy. Using an NVSS 20 cm (F{sub 1.4{sub GHz}} {approx}> 2.5 mJy) selected sample, matched to the SDSS spectroscopic ('main' galaxy and quasar) catalogs and IRAS data (0.04 < z {approx}< 0.2) we perform an in-depth analysis of the radio-FIR correlation for various types of galaxies, separated into (1) quasars, (2) star-forming, (3) composite, (4) Seyfert, (5) LINER, and (6) absorption line galaxies using the standard optical spectroscopic diagnostic tools. We utilize SED-based SFRs to independently quantify the source of radio and FIR emission in our galaxies. Our results show that Seyfert galaxies have FIR/radio ratios lower than, but still within the scatter of, the canonical value due to an additional (likely active galactic nucleus (AGN)) contribution to their radio continuum emission. Furthermore, IR-detected absorption and LINER galaxies are on average strongly dominated by AGN activity in both their FIR and radio emission; however their average FIR/radio ratio is consistent with that expected for star-forming galaxies. In summary, we find that most AGN-containing galaxies in our NVSS-IRAS-SDSS sample have FIR/radio flux ratios indistinguishable from those of the star-forming galaxies that define the radio-FIR correlation. Thus, attempts to separate AGNs from star-forming galaxies by their FIR/radio flux ratios alone can separate only a small fraction of the AGNs, such as the radio-loud quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

X-ray properties of K-selected galaxies at 0.5 < z < 2.0: investigating trends with stellar mass, redshift and spectral type

We examine how the total X-ray luminosity correlates with stellar mass, stellar population, and redshift for a K-band limited sample of ∼3500 galaxies at 0.5 < z < 2.0 from the NEWFIRM Medium Band Survey in the COSMOS field. The galaxy sample is divided into 32 different galaxy types, based on similarities between the spectral energy distributions. For each galaxy type, we further divide the sample into bins of redshift and stellar mass, and perform an X-ray stacking analysis using the Chandra COSMOS data. We find that full band X-ray luminosity is primarily increasing with stellar mass, and at similar mass and spectral type is higher at larger redshifts. When comparing at the same stellar mass, we find that the X-ray luminosity is slightly higher for younger galaxies (i.e., weaker 4000 Å breaks), but the scatter in this relation is large. We compare the observed X-ray luminosities to those expected from low- and high-mass X-ray binaries (XRBs). For blue galaxies, XRBs can almost fully account for the observed emission, while for older galaxies with larger 4000 Å breaks, active galactic nuclei (AGN) or hot gas dominate the measured X-ray flux. After correcting for XRBs, the X-ray luminosity is still slightly higher in younger galaxies, although this correlation is not significant. AGN appear to be a larger component of galaxy X-ray luminosity at earlier times, as the hardness ratio increases with redshift. Together with the slight increase in X-ray luminosity this may indicate more obscured AGNs or higher accretion rates at earlier times.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlation-driven topological band inversion in VSe 2

Recent spectroscopic studies have uncovered topological surface states and band inversion in 1⁢T−VSe 2 , positioning this material at the intersection of correlated electron physics and nontrivial band topology. While previous interpretations attribute these features to surface strain, the microscopic origin of the topological band structure remains unresolved. Here, we present an alternative explanation based on electronic correlations, showing that a negative effective Hubbard interaction (𝑈 eff < 0) applied to the Se 4p orbitals can reproduce the experimentally observed band inversion at both the Γ and 𝑀 points. Using density functional theory (DFT) calculations with orbital-selective interactions, we demonstrate that this approach naturally gives rise to topological surface states without invoking structural distortions. In conclusion, our results highlight the crucial role of ligand orbital correlations in shaping band topology and provide a novel framework for understanding and engineering topological phases in chalcogenide-based quantum materials.

36 MATERIALS SCIENCE↗

A COMPREHENSIVE CENSUS OF NEARBY INFRARED EXCESS STARS

The conclusion of the Wide-Field Infrared Survey Explorer ( WISE ) mission presents an opportune time to summarize the history of using excess emission in the infrared as a tracer of circumstellar material and exploit all available data for future missions such as the James Webb Space Telescope . We have compiled a catalog of infrared excess stars from peer-reviewed articles and perform an extensive search for new infrared excess stars by cross-correlating the Tycho-2 and all-sky WISE (AllWISE) catalogs. We define a significance of excess in four spectral type divisions and select stars showing greater than either 3 σ or 5 σ significance of excess in the mid- and far-infrared. Through procedures including spectral energy distribution fitting and various image analyses, each potential excess source was rigorously vetted to eliminate false positives. The infrared excess stars from the literature and the new stars found through the Tycho-2 and AllWISE cross-correlation produced nearly 500 “Prime” infrared excess stars, of which 74 are new sources of excess, and >1200 are “Reserved” stars, of which 950 are new sources of excess. The main catalog of infrared excess stars are nearby, bright, and either demonstrate excess in more than one passband or have infrared spectroscopy confirming the infrared excess. This study identifies stars that display a spectral energy distribution suggestive of a secondary or post-protoplanetary generation of dust, and they are ideal targets for future optical and infrared imaging observations. The final catalogs of stars summarize the past work using infrared excess to detect dust disks, and with the most extensive compilation of infrared excess stars (∼1750) to date, we investigate various relationships among stellar and disk parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

From Oxo to Oxyl to Biradical: Systematic Multireference Calculations of Methane Activation at MOF Nodes

Methane C–H activation at transition-metal sites often involves electronic structures that challenge conventional single-reference electronic structure descriptions. Although Kohn–Sham density functional theory (DFT) is widely used to study catalytic trends, its reliability for reactions involving strongly correlated species remains uncertain. Here we present a systematic multireference investigation of methane activation at metal–organic framework (MOF) node catalysts across the 3d transition-metal series. We introduce an automated workflow for active space selection to enable consistent application of multireference methods, including multiconfiguration pair-density functional theory and n-electron valence state perturbation theory, to these catalytic systems. These calculations show substantial static correlation in the C–H activation reaction step and predict activation barriers that differ from DFT by 30–70 kJ mol–1, with DFT often qualitatively disagreeing in barrier height trends across transition metals. Analysis of multireference wave functions shows that reactivity is governed by the electronic structure of the M–O moiety along a continuum from metal–oxo to oxyl radical and O biradical character. Increased oxygen-centered spin density and weakened M–O bonding are identified as descriptors of catalytic activity which correlate with lower activation barriers.

Wardzala, Jacob↗

Evidence for a luminosity–decay correlation in GRB GeV light curves

ABSTRACT Correlations between intrinsic properties of gamma-ray burst (GRB) light curves provide clues to the nature of the central engine, the jet, and a possible means to standardize GRBs for cosmological use. Here, we report on the discovery of a correlation between the intrinsic early-time luminosity, LG,10 s, measured at rest frame 10 s, and the average decay rate measured from rest frame 10 s onward, $\alpha _{\mathrm{G,avg\gt 10\, s}}$, in a sample of 13 Fermi Large Area Telescope long GRB light curves. We note that our selection criteria, in particular the requirement for a redshift to construct luminosity light curves, naturally limits our sample to energetic GRBs. A Spearman’s rank correlation gives a coefficient of –0.74, corresponding to a confidence level of 99.6 per cent, indicating that brighter afterglows decay faster than less luminous ones. Assuming a linear relation with log(LG,10s), we find $\alpha _{\mathrm{G,avg\gt 10\, s}}$$= -0.31_{-0.09}^{+0.12}\log ($LG,10s$) + 14.43_{-5.97}^{+4.55}$. The slope of −0.31 is consistent at 1σ with previously identified correlations in the optical/ultraviolet and X-ray light curves. We speculate that differences in the rate at which energy is released by the central engine or differences in observer viewing angle may be responsible for the correlation.

Hinds, K. R. (ORCID:000000020129806X)↗

SU-F-T-113: Inherent Functional Dependence of Spinal Cord Doses of Variable Irradiated Volumes in Spine SBRT

Purpose: Spinal cord tolerance for SBRT has been recommended for the maximum point dose level or at irradiated volumes such as 0.35 mL or 10% of contoured volumes. In this study, we investigated an inherent functional relationship that associates these dose surrogates for irradiated spinal cord volumes of up to 3.0 mL. Methods: A hidden variable termed as Effective Dose Radius (EDR) was formulated based on a dose fall-off model to correlate dose at irradiated spinal cord volumes ranging from 0 mL (point maximum) to 3.0 mL. A cohort of 15 spine SBRT cases was randomly selected to derive an EDR-parameterized formula. The mean prescription dose for the studied cases was 21.0±8.0 Gy (range, 10–40Gy) delivered in 3±1 fractions with target volumes of 39.1 ± 70.6 mL. Linear regression and variance analysis were performed for the fitting parameters of variable EDR values. Results: No direct correlation was found between the dose at maximum point and doses at variable spinal cord volumes. For example, Pearson R{sup 2} = 0.643 and R{sup 2}= 0.491 were obtained when correlating the point maximum dose with the spinal cord dose at 1 mL and 3 mL, respectively. However, near perfect correlation (R{sup 2} ≥0.99) was obtained when corresponding parameterized EDRs. Specifically, Pearson R{sup 2}= 0.996 and R{sup 2} = 0.990 were obtained when correlating EDR (maximum point dose) with EDR (dose at 1 mL) and EDR(dose at 3 mL), respectively. As a result, high confidence level look-up tables were established to correlate spinal cord doses at the maximum point to any finite irradiated volumes. Conclusion: An inherent functional relationship was demonstrated for spine SBRT. Such a relationship unifies dose surrogates at variable cord volumes and proves that a single dose surrogate (e.g. point maximum dose) is mathematically sufficient in constraining the overall spinal cord dose tolerance for SBRT.

60 APPLIED LIFE SCIENCES↗

Unconventional Effects of Transverse Fields in a Transverse Ising Nanotube

The magnetic properties (phase diagrams and magnetizations) of a transverse Ising nanotube with double (surface and core) walls are investigated for the two cases, using the effective field theory with correlations. The first case is that the transverse field Ω{sub S} at the surface wall is selected as a finite value and the transverse field Ω{sub C} in the core wall is fixed at Ω{sub C} = 0.0. The second case is that Ω{sub S} = 0.0 and the value of Ω{sub C} is changed. A number of unconventional phenomena have been found for them, such as the reentrant phenomena and the existence of a compensation point, depending on the selections of the two transverse fields as well as the finite size effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

3D-microdiffraction: A facility for the Australian synchrotron

Phenomena occurring at the mesoscale, 0.1--10 {mu}m, e.g. polycrystallinity, crystal defects, grain boundaries, orientation and strain, can play a profound role in the bulk behaviour of materials. These properties have been extremely difficult to measure in the spatially resolved in situ real time mode critical to obtaining true understanding. The microdiffraction fluorescence probe, an end-station facility selected for the Australian synchrotron, will enable these properties to be measured, in 3D at submicron scale, correlated to composition (X-ray fluorescence) as well as local elemental coordination (X-ray absorption spectroscopy). This facility will have wide spread fundamental and applied application across the earth and material science communities.

43 PARTICLE ACCELERATORS↗

DNA Ploidy Measured on Archived Pretreatment Biopsy Material May Correlate With Prostate-Specific Antigen Recurrence After Prostate Brachytherapy

Purpose: To explore whether DNA ploidy of prostate cancer cells determined from archived transrectal ultrasound-guided biopsy specimens correlates with disease-free survival. Methods and Materials: Forty-seven failures and 47 controls were selected from 1006 consecutive low- and intermediate-risk patients treated with prostate {sup 125}I brachytherapy (July 1998-October 2003). Median follow-up was 7.5 years. Ten-year actuarial disease-free survival was 94.1%. Controls were matched using age, initial prostate-specific antigen level, clinical stage, Gleason score, use of hormone therapy, and follow-up (all P nonsignificant). Seventy-eight specimens were successfully processed; 27 control and 20 failure specimens contained more than 100 tumor cells were used for the final analysis. The Feulgen-Thionin stained cytology samples from archived paraffin blocks were used to determine the DNA ploidy of each tumor by measuring integrated optical densities. Results: The samples were divided into diploid and aneuploid tumors. Aneuploid tumors were found in 16 of 20 of the failures (80%) and 8 of 27 controls (30%). Diploid DNA patients had a significantly lower rate of disease recurrence (P=.0086) (hazard ratio [HR] 0.256). On multivariable analysis, patients with aneuploid tumors had a higher prostate-specific antigen failure rate (HR 5.13). Additionally, those with “excellent” dosimetry (V100 >90%; D90 >144 Gy) had a significantly lower recurrence rate (HR 0.25). All patients with aneuploid tumors and dosimetry classified as “nonexcellent” (V100 <90%; D90 <144 Gy) (5 of 5) had disease recurrence, compared with 40% of patients with aneuploid tumors and “excellent” dosimetry (8 of 15). In contrast, dosimetry did not affect the outcome for diploid patients. Conclusions: Using core biopsy material from archived paraffin blocks, DNA ploidy correctly classified the majority of failures and nonfailures in this study. The results suggest that DNA ploidy can be used as a useful marker for aggressiveness of localized prostate cancer. A larger study will be necessary to further confirm our hypothesis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Adsorption mechanisms of cesium at calcium-silicate-hydrate surfaces using molecular dynamics simulations

We report understanding the mechanisms of interactions and immobilization of radionuclides in cement systems at the molecular level is key to developing safe and novel solutions for the long-term storage of nuclear wastes. The molecular level adsorption mechanisms of cesium (Cs + ) ions onto tobermorite 9 Å, tobermorite 14 Å, and jennite – three crystalline structural analogues for calcium-silicate-hydrates, the main components in cement-based materials, were investigated using molecular dynamics (MD) simulations. Convergence monitoring of the simulations, using the root mean square displacement with average correlation analysis, indicated that MD trajectories of 10–15 ns were needed given the size of the selected computational cell to properly capture the dynamic process of adsorption. Cs + ions adsorbed as inner-sphere complexes at the tobermorite surfaces, while they showed lower affinity for jennite. The charge and structure of the surface layer strongly influenced the adsorption mechanisms of Cs + ions. Strong association with the hexagonal cavities of the silica sites were seen at the tetrahedral SiO 4 surface of the tobermorite structures. Cs + ion adsorption was attributed to co-ion adsorption at the octahedral CaO 6 surface of tobermorite 9 Å, cation exchange at that of tobermorite 14 Å, and electrostatic interaction with the surface hydroxyl groups for jennite. Distribution coefficients of Cs + ions onto cement pastes derived from molecular dynamics by taking the surface structure and dynamics of Cs + ions directly into account showed a range of overlap with experimental results.

42 ENGINEERING↗

Alternative strategies of nutrient acquisition and energy conservation map to the biogeography of marine ammonia-oxidizing archaea

Ammonia-oxidizing archaea (AOA) are among the most abundant and ubiquitous microorganisms in the ocean, exerting primary control on nitrification and nitrogen oxides emission. Although united by a common physiology of chemoautotrophic growth on ammonia, a corresponding high genomic and habitat variability suggests tremendous adaptive capacity. Here, we compared 44 diverse AOA genomes, 37 from species cultivated from samples collected across diverse geographic locations and seven assembled from metagenomic sequences from the mesopelagic to hadopelagic zones of the deep ocean. Comparative analysis identified seven major marine AOA genotypic groups having gene content correlated with their distinctive biogeographies. Phosphorus and ammonia availabilities as well as hydrostatic pressure were identified as selective forces driving marine AOA genotypic and gene content variability in different oceanic regions. Notably, AOA methylphosphonate biosynthetic genes span diverse oceanic provinces, reinforcing their importance for methane production in the ocean. Together, our combined comparative physiological, genomic, and metagenomic analyses provide a comprehensive view of the biogeography of globally abundant AOA and their adaptive radiation into a vast range of marine and terrestrial habitats.

59 BASIC BIOLOGICAL SCIENCES↗

Towards emulating cosmic shear data: revisiting the calibration of the shear measurements for the Kilo-Degree Survey

Exploiting the full statistical power of future cosmic shear surveys will necessitate improvements to the accuracy with which the gravitational lensing signal is measured. We present a framework for calibrating shear with image simulations that demonstrates the importance of including realistic correlations between galaxy morphology, size, and more importantly, photometric redshifts. This realism is essential to ensure that selection and shape measurement biases can be calibrated accurately for a tomographic cosmic shear analysis. We emulate Kilo-Degree Survey (KiDS) observations of the COSMOS field using morphological information from Hubble Space Telescope imaging, faithfully reproducing the measured galaxy properties from KiDS observations of the same field. We calibrate our shear measurements from lens fit, and find through a range of sensitivity tests that lens fit is robust and unbiased within the allowed two per cent tolerance of our study. Our results show that the calibration has to be performed by selecting the tomographic samples in the simulations, consistent with the actual cosmic shear analysis, because the joint distributions of galaxy properties are found to vary with redshift. Ignoring this redshift variation could result in misestimating the shear bias by an amount that exceeds the allowed tolerance. To improve the calibration for future cosmic shear analyses, it will also be essential to correctly account for the measurement of photometric redshifts, which requires simulating multi-band observations.

79 ASTRONOMY AND ASTROPHYSICS↗

3 MV hypervelocity dust accelerator at the Colorado Center for Lunar Dust and Atmospheric Studies

A hypervelocity dust accelerator for studying micrometeorite impacts has been constructed at the Colorado Center for Lunar Dust and Atmospheric Studies (CCLDAS) at the University of Colorado. Based on the Max-Planck-Instituet fuer Kernphysik (MPI-K) accelerator, this accelerator is capable of emitting single particles of a specific mass and velocity selected by the user. The accelerator consists of a 3 MV Pelletron generator with a dust source, four image charge pickup detectors, and two interchangeable target chambers: a large high-vacuum test bed and an ultra-high vacuum impact study chamber. The large test bed is a 1.2 m diameter, 1.5 m long cylindrical vacuum chamber capable of pressures as low as 10{sup -7} torr while the ultra-high vacuum chamber is a 0.75 m diameter, 1.1 m long chamber capable of pressures as low as 10{sup -10} torr. Using iron dust of up to 2 microns in diameter, final velocities have been measured up to 52 km/s. The spread of the dust particles and the effect of electrostatic focusing have been measured using a long exposure CCD and a quartz target. Furthermore, a new technique of particle selection is being developed using real time digital filtering techniques. Signals are digitized and then cross-correlated with a shaped filter, resulting in a suppressed noise floor. Improvements over the MPI-K design, which include a higher operating voltage and digital filtering for detection, increase the available parameter space of dust emitted by the accelerator. The CCLDAS dust facility is a user facility open to the scientific community to assist with instrument calibrations and experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

WHAT CONTROLS THE Fe II STRENGTH IN ACTIVE GALACTIC NUCLEI?

We used a large, homogeneous sample of 4178 z {<=} 0.8 Seyfert 1 galaxies and QSOs selected from the Sloan Digital Sky Survey to investigate the strength of Fe II emission and its correlation with other emission lines and physical parameters of active galactic nuclei. We find that the strongest correlations of almost all the emission-line intensity ratios and equivalent widths (EWs) are with the Eddington ratio (L/L{sub Edd}), rather than with the continuum luminosity at 5100 A (L{sub 5100}) or black hole mass (M{sub BH}); the only exception is the EW of ultraviolet Fe II emission, which does not correlate at all with broad-line width, L{sub 5100}, M{sub BH}, or L/L{sub Edd}. By contrast, the intensity ratios of both the ultraviolet and optical Fe II emission to Mg II {lambda}2800 correlate quite strongly with L/L{sub Edd}. Interestingly, among all the emission lines in the near-UV and optical studied in this paper (including Mg II {lambda}2800, H{beta}, and [O III] {lambda}5007), the EW of narrow optical Fe II emission has the strongest correlation with L/L{sub Edd}. We hypothesize that the variation of the emission-line strength in active galaxies is regulated by L/L{sub Edd} because it governs the global distribution of the hydrogen column density of the clouds gravitationally bound in the line-emitting region, as well as its overall gas supply. The systematic dependence on L/L{sub Edd} must be corrected when using the Fe II/Mg II intensity ratio as a measure of the Fe/Mg abundance ratio to study the history of chemical evolution in QSO environments.

79 ASTRONOMY AND ASTROPHYSICS↗

THE GLOBAL IMPLICATIONS OF THE HARD X-RAY EXCESS IN TYPE 1 ACTIVE GALACTIC NUCLEI

Recent evidence for a strong 'hard excess' of flux at energies {approx}> 20 keV in some Suzaku observations of type 1 active galactic nuclei (AGNs) has motivated an exploratory study of the phenomenon in the local type 1 AGN population. We have selected all type 1 AGNs in the Swift Burst Alert Telescope 58 month catalog and cross-correlated them with the holdings of the Suzaku public archive. We find the hard excess phenomenon to be a ubiquitous property of type 1 AGNs. Taken together, the spectral hardness and equivalent width of Fe K{alpha} emission are consistent with reprocessing by an ensemble of Compton-thick clouds that partially cover the continuum source. In the context of such a model, {approx}80% of the sample has a hardness ratio consistent with >50% covering of the continuum by low-ionization, Compton-thick gas. A more detailed study of the three hardest X-ray spectra in our sample reveal a sharp Fe K absorption edge at {approx}7 keV in each of them, indicating that blurred reflection is not responsible for the very hard spectral forms. Simple considerations place the distribution of Compton-thick clouds at or within the optical broad-line region.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced pedestal transport driven by edge collisionality on Alcator C-Mod and its role in regulating H-mode pedestal gradients

Experimental measurements of plasma and neutral profiles across the pedestal are used in conjunction with 2D edge modeling to examine pedestal stiffness in Alcator C-Mod H-mode plasmas. Enhanced D α experiments on Alcator C-Mod observed pedestal degradation and loss in confinement below a critical value of net power crossing the separatrix, P net = $P^{crit}_{net}$ ≈ 2.3 MW, in the absence of any external fueling. New analysis of ionization and particle flux profiles reveal saturation of the pedestal electron density, $n^{ped}_{e}$, despite continuous increases in ionization throughout the pedestal, inversely related to P net . A limi to the pedestal $\nabla$n e emerges as the particle flux, Γ D , continues to grow, implying increases in the effective particle diffusivity, D eff . This is well-correlated with the separatrix collisionality, $v^*_{sep}$ and a turbulence control parameter, α t , implying a possible transition in type of turbulence. The transition is well correlated with the experimentally observed value of $P^{crit}_{net}$. SOLPS-ITER modeling is performed for select discharges from the power scan, constrained with experimental electron and neutral densities, measured at the outer midpane. The modeling confirms general growth in D eff , consistent with experimental findings, and additionally suggests even larger growth in Χ e at the same $P^{crit}_{net}$.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗