Search NASA⌕ Search

SEARCH · Search NASA

Results for “data collection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Development and Validation of Sensorimotor Assessment Tasks Using Spaceflight Analogs

INTRODUCTION Exploration class missions will require a new level of crew autonomy to self-assess and treat their sensorimotor dysfunction around periods of gravitational transition, where sensorimotor disturbances are at their highest. There is a need to define sensorimotor assessment thresholds that indicate when performance in early extravehicular activities (EVAs) might be impacted or unsafe. The purpose of this study was to develop and validate a set of assessment tasks using sensorimotor spaceflight analogs including the Sensorimotor Disorientation Analog (SDA) and +3G x sustained centrifugation. METHODS For the SDA, forty-one healthy non-astronaut subjects (21 males, 20 females; Mean ± SD, Age: 34.0 ± 7.8 years) volunteered to participate in this study. Subjects attended two testing sessions: 1) familiarization to the tasks and baseline data collection, and 2) tasks completed under two levels of sensorimotor disorientation. Subjects performed a series of seven sensorimotor assessment tasks followed by two operationally relevant EVA analog tasks. The sensorimotor assessments tasks, ordered from least to most provocative of the sensorimotor system, included: postural stability, step test, prone/supine recovery from fall (RFF), four-square-step-test, obstacle negotiation with turns (OTT), kneel-and-reach, and augmented reality full-body coordination. The operational analog tasks included a top-hatch capsule egress and a 5-minute EVA traversal. Disorientation was applied via the SDA which utilized galvanic vestibular stimulation and weighted trunk, wrists, and ankles to target the vestibular and proprioceptive systems such that performance while wearing the SDA mimicked astronaut postflight performance at R+0 and R+1. Sixteen healthy non-astronaut subjects (10 males, 6 females; Age: 35.0 ± 9.5 years) completed +3G x 60-minute sustained centrifugation as an established spaceflight analog replicating the vestibular disruptions seen postflight. Subjects completed a pre-session which included familiarization to the tasks and a 5-minute centrifuge spin. The data collection session included, in order, a baseline data collection, 60-minute centrifuge spin, immediate post-centrifuge data collection, 45-minute seated recovery, and a final data collection. The same assessment and operational analog tasks were conducted as described above. RESULTS Pearsons’ correlation r-values were calculated between assessment and operational analog tasks. The two assessment tasks with the strongest correlations to the operational analog tasks were the RFF (SDA: r≥ 0.57, Centrifuge: r ≥0.55) and OTT (SDA: r≥ 0.66, Centrifuge: r ≥ 0.49). For brevity, repeated measures ANOVA with follow-up paired t-tests are discussed for these two assessment tasks. The SDA found significant differences between all three levels of disorientation for both RFF and OTT (p < 0.001). Significant differences were also found between baseline and immediate post centrifuge testing for both the RFF (p≤ 0.011) and OTT (p = 0.001). Additional results are forthcoming for both disorientation paradigms. DISCUSSION These validation studies provide evidence for down-selection of the assessment tasks that were able to distinguish between levels of sensorimotor disorientation and correlate to performance in operationally relevant tasks for use in upcoming Artemis missions.

S C Moudy↗

Rapid visualization of hydrogen positions in neutron protein crystallography structures

Neutron crystallography is a powerful technique to visualize experimentally the position of light atoms, including hydrogen and its isotope deuterium. Over the last several years, structural biologists have shown an increasing interest for the technique as it uniquely complements X-ray crystallographic data by revealing the position of hydrogen/deuterium atoms in macromolecules. With this regained interest, access to macromolecule neutron crystallography beam lines is becoming a limiting step. In this report we show that rapid data collection could be a valuable alternative to long data collection time when appropriate. Comparison of perdeuterated Rubredoxin structures refined against neutron data sets collected over hours and up to five days shows that rapid neutron data collection in just 14 hours is sufficient to provide the position of 262 hydrogen positions atoms without ambiguity.

74 ATOMIC AND MOLECULAR PHYSICS↗

Illustrating the practice of statistics

The practice of statistics involves analyzing data and planning data collection schemes to answer scientific questions. Issues often arise with the data that must be dealt with and can lead to new procedures. In analyzing data, these issues can sometimes be addressed through the statistical models that are developed. Simulation can also be helpful in evaluating a new procedure. Moreover, simulation coupled with optimization can be used to plan a data collection scheme. The practice of statistics as just described is much more than just using a statistical package. In analyzing the data, it involves understanding the scientific problem and incorporating the scientist's knowledge. In modeling the data, it involves understanding how the data were collected and accounting for limitations of the data where possible. Moreover, the modeling is likely to be iterative by considering a series of models and evaluating the fit of these models. Designing a data collection scheme involves understanding the scientist's goal and staying within hislher budget in terms of time and the available resources. Consequently, a practicing statistician is faced with such tasks and requires skills and tools to do them quickly. We have written this article for students to provide a glimpse of the practice of statistics. To illustrate the practice of statistics, we consider a problem motivated by some precipitation data that our relative, Masaru Hamada, collected some years ago. We describe his rain gauge observational study in Section 2. We describe modeling and an initial analysis of the precipitation data in Section 3. In Section 4, we consider alternative analyses that address potential issues with the precipitation data. In Section 5, we consider the impact of incorporating additional infonnation. We design a data collection scheme to illustrate the use of simulation and optimization in Section 6. We conclude this article in Section 7 with a discussion.

99 GENERAL AND MISCELLANEOUS↗

Near Real-Time Two and Three-Dimensional Electrical Geophysical Monitoring of Natural and Engineered Processes Associated with Subsurface Remediation - 16052

Legacy soil and groundwater contamination associated with nuclear weapons production is projected to be one of the largest cleanup liabilities to the U.S. Department of Energy for the foreseeable future. Remediation of subsurface contaminants is complicated by the combined effects of geochemical heterogeneity, geological heterogeneity, and the difficulty and expense of adequate borehole access. Each of these complications contributes to uncertainty in the distribution of contaminants and the performance of in situ treatments, which increases risk to human health and the environment and cost to closure in general. Electrical resistivity tomography (ERT) is a method of remotely imaging the electrical properties of the subsurface, which are governed by both geochemical and geological structure, thereby providing useful proxies for understanding contaminant distribution and the behavior in situ remediation processes. Recent advancements in both data collection and data processing capabilities are enabling ERT monitoring to be executed and provided to site operators in near real-time. To summarize the process, ERT surveys are rapidly and continuously collected during a time-sensitive operation such as an amendment injection. At the completion of each survey, data are transferred by wireless internet to offsite supercomputing resources for parallel tomographic inversion. Inversion results are then transferred back to onsite operators and/or other locations for visualization. In this paper, we demonstrate the utility of time-lapse ERT for monitoring fluid transport (both gas and liquid phase). We then demonstrate two real-time imaging applications for monitoring both natural and engineered processes at the Hanford Site within the vadose and the saturated zones. We expect this new capability for autonomous real-time imaging to enable ERT to be used as a cost-effective, short-term rapid feedback mechanism for guiding subsurface remediation injections, in addition to longer term monitoring of post-injection performance and environmental impact, all using the same electrode array and instrumentation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determining biomolecular structures near room temperature using X-ray crystallography: concepts, methods and future optimization

For roughly two decades, cryocrystallography has been the overwhelmingly dominant method for determining high-resolution biomolecular structures. Competition from single-particle cryo-electron microscopy and micro-electron diffraction, increased interest in functionally relevant information that may be missing or corrupted in structures determined at cryogenic temperature, and interest in time-resolved studies of the biomolecular response to chemical and optical stimuli have driven renewed interest in data collection at room temperature and, more generally, at temperatures from the protein–solvent glass transition near 200 K to ∼350 K. Fischer has recently reviewed practical methods for room-temperature data collection and analysis [Fischer (2021), Q. Rev. Biophys. 54 , e1]. Here, the key advantages and physical principles of, and methods for, crystallographic data collection at noncryogenic temperatures and some factors relevant to interpreting the resulting data are discussed. For room-temperature data collection to realize its potential within the structural biology toolkit, streamlined and standardized methods for delivering crystals prepared in the home laboratory to the synchrotron and for automated handling and data collection, similar to those for cryocrystallography, should be implemented.

59 BASIC BIOLOGICAL SCIENCES↗

First STAX detector installation at the National Institute for Radioelements (IRE)

The Source Term Analysis of Xenon (STAX) project has been installing stack detectors at medical isotope production facilities to measure radioxenon emissions to investigate the effect of radioxenon releases on nuclear explosion monitoring. This paper outlines the installation of the first STAX detection system at the National Institute for Radioelements (IRE) in Fleurus, Belgium which has been operating for over three years and transferring collected data to the STAX repository. Information about the equipment installed, the data flow established, and calculations for determination of radioxenon releases from the facility are presented. Further. data quality was investigated to confirm values reported by STAX automated data processing and in a comparison of collected STAX data with data collected by IRE for regulatory reporting.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A satellite based telemetry link for a UAV application

The requirements for a satellite based communication facility to service the needs of the Geographical Information System (GIS) data collection community are addressed in this paper. GIS data is supplied in the form of video imagery at sub-television rates in one or more spectral bands / polarizations laced with a position correlated data stream. The limitations and vicissitudes of using a terrestrial based telecommunications link to collect GIS data are illustrated from actual mission scenarios. The expectations from a satellite based communications link by the geophysical data collection community concerning satellite architecture, operating bands, bandwidth, footprint agility, up link and down link hardware configurations on the UAV, the Mobile Control Vehicle and at the Central Command and Data Collection Facility comprise the principle issues discussed in the first section of this paper. The final section of the paper discusses satellite based communication links would have an increased volume and scope of services the GIS data collection community could make available to the GIS user community, and the price the data collection community could afford to pay for access to the communication satellite described in the paper.

Bloise, Anthony↗

Rotation-as-fast-axis scanning-probe x-ray tomography: the importance of angular diversity for fly-scan modes

Here, we investigate the effects of angular diversity on image-reconstruction quality of scanning-probe x-ray tomography for both fly- and step-mode data collection. We propose probe-coverage maps as a tool for both visualizing and quantifying the distribution of probe interactions with the object. We show that data sampling with more angular diversity yields better tomographic image reconstruction as long as it does not come at the cost of not covering some voxels in the object. Therefore, for fly-mode data collection, rotation-as-fast-axis (RAFA) trajectories are superior to raster or other non-RAFA trajectories because they allow for the increasing of angular diversity without sacrificing spatial coverage uniformity. In contrast, for step-mode data collection and a fixed measurement budget, increasing angular diversity can come at the cost of not covering some voxels, and may not be desired. This study has implications for how scanning-probe microscopes should be collecting data in order to make the most of limited resources.

47 OTHER INSTRUMENTATION↗

National Ignition Facility Opacity Time Resolved Spectrometer Systems Engineering Final Project

The National Ignition Facility (NIF) is the world’s largest and most energetic laser facility. The NIF system is designed to produce high energy density (temperature and pressure) conditions through the application of its 192 laser beams. One of the users of NIF is the opacity platform developed to study the opacities at temperatures and densities relevant to the solar interior and stellar evolution. The platform was developed to study iron (Fe) opacity at temperatures relevant to the solar interior. The opacity campaign uses spectrometers to gather data. Spectrometers utilize crystals to produce x-ray spectra that are recorded on time-integrated and time-resolved detectors. The opacity spectrometer (OpSpec) currently fielded and in use at NIF uses a time integrated film channel to collect data. The opacity spectrometer time resolved (OpSpecTR) will utilize novel hCMOS detectors to capture time resolved images of spectra of interest. The key stakeholders identified for OpSpecTR included the physicists responsible for OpSpec and OpSpecTR, the Target Area Science and Engineering (TASE) department at NIF, the NIF and Photon Science (NIF & PS) Opacity program, the Nevada National Security Site (NNSS) Physics and Engineering program, the Sandia hCMOS manufacturing and testing program, and the Los Alamos National Laboratory (LANL) program sponsor. The Target and Experimental Operations (TEXOPS) was identified as a key stakeholder because the group includes the individuals that will physically interact with the OpSpecTR system as it participates in NIF experiments. The opacity platform collects data in a unique orientation relative to the existing diagnostics fielded at NIF. The existing infrastructure at NIF uses a diagnostic manipulator (DIM) to insert the diagnostic near the target chamber center to collect data during a NIF shot. Existing diagnostics collect data through the center line of the DIM axis and collect relevant data perpendicular to this axis. The opacity platform requires crystals mounted in a specific orientation which requires data collection parallel to the DIM axis. This deviation from standard NIF practices was a key factor in developing requirements.

42 ENGINEERING↗

NGEE Arctic Meteorological Data from Instrumented PCDC Stations, Council Site, Seward Peninsula, Alaska, 2018 - 2023

This dataset provides meteorological data collected at two instrumented Power, Communication, and Data Collection (PCDC) Stations, located at Council Road Mile Marker 71 (CN_MM71) and Council Road Mile Marker 68 (Rocky Top). Measurements began in June of 2018 at CN_MM71 and in September 2018 at Rocky Top and ended in 2023. Raw data included. Meteorological data include air temperature, relative humidity, wind speed and direction, and snow depth. Measurements have been aggregated to both 10-minute and 30-minute reporting intervals provided in four comma-separated (*.csv) data files.• The 30-minute data files include only the primary meteorological variables, leaf wetness, and snow depth.. The 30-minute reporting interval matches other coincident site data collections.• The 10-minute files provide the primary meteorological variables and numerous system operational parameters such as battery charge and solar and wind turbine status. This 10-minute data product is valuable for analyzing solar and wind charging system performance in arctic landscapes.Daily photographic images (09:00, 12:00, and 15:00 AKST/AKDT) of the PCDC Stations and the surrounding landscape that are captured by an adjacent web camera, are also provided.The daily 12:00 images from CN_MM71 camera have been compiled into time-lapse movies:• October 2018 – June 12, 2019 = Council_winter_2018_2019.mov• January 2019 – December 2019 = Council_2019.mp4The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

National Brackish Groundwater Assessment 2017

Brackish groundwater (BGW), defined for this assessment as having a dissolved-solids concentration between 1,000 and 10,000 milligrams per liter, is an unconventional source of water that may offer a partial solution to current (2016) and future water challenges. In support of the National Water Census, the U.S. Geological Survey has completed a BGW assessment to gain a better understanding of the occurrence and characteristics of BGW resources of the United States as an alternative source of water. Analyses completed as part of this assessment relied on previously collected data from multiple sources, and no new data were collected. One of the most important contributions of this assessment was the creation of a database containing chemical data and aquifer information for the known quantities of BGW in the United States. Data were compiled from single publications to large datasets and from local studies to national assessments, and includes chemical data on the concentrations of dissolved solids, major ions, trace elements, nutrients, radionuclides, and physical properties of the resource (pH, temperature, specific conductance). This database represents data from a compilation of water-quality samples from 100,000+ (major-ions data) to 300,000+ (dissolved-solids data) groundwater wells across the continental U.S., Alaska, Hawaii, Puerto Rico, the U.S. Virgin Islands, Guam, and American Samoa. The data are published here as an ESRI geodatabase with a point feature class and associated attribute table, and also as non-proprietary comma-separated value table. It was not possible to compile all data available for the Nation, and data selected for this investigation were mostly limited to larger datasets that were available in a digital format.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Sharing the Sun: Community Solar Deployment and Subscriptions (As of January 2026)

The community solar market analysis presented here is based primarily on data collected through Sharing the Sun, an initiative of the National Community Solar Partnership+ (NCSP+). Sharing the Sun data collection and analysis are conducted by the National Laboratory of the Rockies (NLR) as part of its support for implementation of NCSP+. NLR first released a dataset of community solar projects in 2018 and updates it biannually. The January 2026 dataset, data collection methodology, and all the previous datasets are available from NLR's Data Catalog: https://data.nlr.gov/submissions/244. The dataset presents project-level information including location, capacity, operating utility, and year of interconnection. The dataset is created from multiple data sources such as utility data, public utility commissions, project developer websites, media releases, primary data collection by NLR, and data provided by developers under nondisclosure agreements. This presentation builds on a previous analysis of the community solar project dataset, Sharing the Sun: Community Solar Deployment and Subscriptions (as of June 2024). Dr. Gabriel Chan and his team at the University of Minnesota contribute to this effort. NCSP+ is led and funded by U.S. Department of Energy's Integrated Energy Systems Office (IESO).

14 SOLAR ENERGY↗

SEDS1 mission software verification using a signal simulator

The first flight of the Small Expendable Deployer System (SEDS1) is schedule to fly as the secondary payload of a Delta 2 in March, 1993. The objective of the SEDS1 mission is to collect data to validate the concept of tethered satellite systems and to verify computer simulations used to predict their behavior. SEDS1 will deploy a 50 lb. instrumented satellite as an end mass using a 20 km tether. Langley Research Center is providing the end mass instrumentation, while the Marshall Space Flight Center is designing and building the deployer. The objective of the experiment is to test the SEDS design concept by demonstrating that the system will satisfactorily deploy the full 20 km tether without stopping prematurely, come to a smooth stop on the application of a brake, and cut the tether at the proper time after it swings to the local vertical. Also, SEDS1 will collect data which will be used to test the accuracy of tether dynamics models used to stimulate this type of deployment. The experiment will last about 1.5 hours and complete approximately 1.5 orbits. Radar tracking of the Delta II and end mass is planned. In addition, the SEDS1 on-board computer will continuously record, store, and transmit mission data over the Delta II S-band telemetry system. The Data System will count tether windings as the tether unwinds, log the times of each turn and other mission events, monitor tether tension, and record the temperature of system components. A summary of the measurements taken during the SEDS1 are shown. The Data System will also control the tether brake and cutter mechanisms. Preliminary versions of two major sections of the flight software, the data telemetry modules and the data collection modules, were developed and tested under the 1990 NASA/ASEE Summer Faculty Fellowship Program. To facilitate the debugging of these software modules, a prototype SEDS Data System was programmed to simulate turn count signals. During the 1991 summer program, the concept of simulating signals produced by the SEDS electronics systems and circuits was expanded and more precisely defined. During the 1992 summer program, the SEDS signal simulator was programmed to test the requirements of the SEDS Mission software, and this simulator will be used in the formal verification of the SEDS Mission Software. The formal test procedures specification was written which incorporates the use of the signal simulator to test the SEDS Mission Software and which incorporates procedures for testing the other major component of the SEDS software, the Monitor Software.

Pierson, William E.↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2017 Puget Sound Regional Travel Study

# 2017 Puget Sound Regional Travel Study The 2017 Puget Sound Regional Travel Study collected household- and person-level activity and travel pattern information from residents throughout the Puget Sound Regional Council's four-county region in Washington State. It followed the [2014-2015 Puget Sound Regional Travel Study](https://www.nrel.gov/transportation/secure-transportation-data/tsdc-puget-sound-travel-study), starting a planned six-year data collection that includes 2019 and 2021. The multiyear program's goal is to maintain an updated source of household travel behavior data that: - Supports modeling and planning needs - Facilitates trend analysis over time - Allows for regular study design updates to integrate evolving data collection methods and emerging travel behaviors and transportation issues. ## Data Collection Agency The Puget Sound Regional Council conducted the study. ## Methodology The 2017 study featured both the design and administration of a one-day household travel diary (approximately 80% of households before data cleaning) and a seven-day smartphone global positioning system (GPS) diary (approximately 20% of households before data cleaning). It combined data collection methods, including smartphone, online, and telephone. The survey design included several stages to recruit and collect data about households, their members, and their travel behaviors during the assigned travel period. ## Survey Records Survey records include a total of 6,254 participants. ## More Information For more information, see the [survey documentation](https://www.nrel.gov/media/docs/libraries/tsdc/zip/tsdc-2017-puget-sound-travel-study-documentation.zip?sfvrsn=45991f2f_1). ## Transportation Data The data set contains a demographic and socioeconomic composition of 6,254 people from 3,285 households in the Puget Sound regional area, as well as detailed information on the travel behavior of each household for a designated 24-hour period. The survey logged over 508 thousand vehicle miles of travel by participants during 52,492 trips. Transportation data are available as zipped files. [Download Winzip](http://www.winzip.com/downwz.htm).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗