Search NASA⌕ Search

SEARCH · Search NASA

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Critical Role of the Steric Factor in the Viscoelasticity of Vitrimers

Dynamic covalent networks (DCNs) are a promising solution to mitigate plastic-waste-related issues through improved recyclability enabled by dynamic bonds. However, our understanding of the mechanisms controlling their viscoelasticity, especially in vitrimers where bond exchange relies on associative reactions, remains limited. Here, in this study, we investigate the dynamics in model DCNs with boric ester functionalities, and the analysis of the temperature dependence of their terminal relaxation times revealed a puzzling result: extremely large Arrhenius prefactors associated with their dynamic bond rearrangement times. We ascribe this observation to the often-overlooked chemical steric factor that slows down chemical reactions, therefore decreasing the vitrimers’ bond exchange rate by many orders. The estimated steric factor of the bond exchange in our model DCNs is comparable to those observed in boronic ester exchange reactions between small molecules. Additional analysis of literature data revealed an overall low steric factor also for imine bond exchange, thus highlighting the role of this parameter in tremendously slowing down bond exchange in DCNs despite low activation energy barriers. We propose a general approach for designing vitrimers with desired viscoelastic and creep properties considering the critical role of the steric factor in bond rearrangement mechanisms, in addition to the traditionally considered activation energy and matrix properties.

Carden, Gregory P. [Univ. of Tennessee, Knoxville,↗

Deep inelastic scattering from A = 3 nuclei: Nucleon structure and the EMC effect

The MARATHON experiment ran at Jefferson Laboratory in 2018, measuring deep inelastic scattering of 10.6 GeV electrons from the proton (p), deuterium (D), tritium ( 3 H), and helium-3 ( 3 He). MARATHON's experimental observables are cross section ratios, most notably 3 H/ 3 He. This ratio of mirror nuclei is used for a novel extraction of the nucleon structure function ratio $F^n_2$ /$F^p_2$ with minimal nuclear corrections. Determining leading-order $F^n_2$ /$F^p_2$ at high x provides important constrains on the ratio of nucleon valence quark distributions d/u. The ratios 3 H/D and 3 He/D allow a determination of the EMC effect in the lightest nuclei sensitive to possible isospin dependence of nuclear effects. Lastly, the D/p ratio allows a comparison of the MARATHON experiment to SLAC measurements, and provides data to which the A = 3 ratios can be renormalized. The MARATHON results provide new constraints on d/u. Additionally, the results emphasize the importance of higher-order effects in extracting $F^n_2$ /$F^p_2$ from DIS measurements, and can help constrain said effects. In the renormalization scheme applied in the MARATHON analysis, no significant isospin dependence of the EMC effect is observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites

Metal-ceramic nanolaminate composites show promise as high strength and toughness materials. Micropillar compression was used to characterize the mechanical behavior of AlSiC multilayers in different orientations including loading at 0°, 45° and 90° with respect to the direction of the layers. The 0° orientation showed the highest strength while the 45° orientation showed the lowest strength. Each orientation showed unique deformation behavior. Effects of pillar size and aspect ratio were also studied. Higher compressive strengths were observed in smaller pillars for all orientations. This effect was shown to be due to a lower probability of flaws using Weibull statistics. Additionally, changes in the aspect ratio was shown to have no significant effect on the behavior except an increase in the strain to failure in the 0° orientation. In conclusion, finite element analysis (FEA) was used to simulate and understand the effect of these parameters on the deformation behavior.

36 MATERIALS SCIENCE↗

Gap Analysis of Storage Conditions between NNSS and LANL for SAVY 4000 Use

As part of the gap analysis for utilizing the SAVY 4000® at NNSS, the hydrogen gas generation rate and the effect of atmospheric pressure changes on the maximum normal operating pressure (MNOP) of the SAVY container must be evaluated because the nuclear material characteristics and atmospheric conditions will not be the same for NNSS and LANL. This paper documents this analysis and demonstrates that the LANL SAVY Safety Analysis Report (SAR) is bounding with respect to the Nevada facilities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hypersonic CFD applications for the National Aero-Space Plane

Design and analysis of the NASP depends heavily upon developing the critical technology areas that cover the entire engineering design of the vehicle. These areas include materials, structures, propulsion systems, propellants, integration of airframe and propulsion systems, controls, subsystems, and aerodynamics areas. Currently, verification of many of the classical engineering tools relies heavily on computational fluid dynamics. Advances are being made in the development of CFD codes to accomplish nose-to-tail analyses for hypersonic aircraft. Additional details involving the partial development, analysis, verification, and application of the CFL3D code and the SPARK combustor code are discussed. A nonequilibrium version of CFL3D that is presently being developed and tested is also described. Examples are given of portion calculations for research hypersonic aircraft geometries and comparisons with experiment data show good agreement.

Richardson, Pamela F.↗

Cyclic CO{sub 2} chemisorption–desorption behavior of Na{sub 2}ZrO{sub 3}: Structural, microstructural and kinetic variations produced as a function of temperature

A structural, microstructural and kinetic analysis of the Na{sub 2}ZrO{sub 3}–CO{sub 2} system was performed over 20 chemisorption–desorption cycles. Different cyclic experiments were performed between 500 and 800 °C. Although the best results were obtained in Na{sub 2}ZrO{sub 3} sample treated at 550 °C, all the samples treated between 500 and 700 °C presented good CO{sub 2} chemisorption efficiencies and stabilities. On the contrary, Na{sub 2}ZrO{sub 3} sample treated at 800 °C presented a continuous decrement of the CO{sub 2} chemisorption. After 20 cycles all the samples presented a partial Na{sub 2}ZrO{sub 3} decomposition, determined by the ZrO{sub 2} formation, which was associated to sodium sublimation. Additionally, the Na{sub 2}ZrO{sub 3} microstructural analysis showed a systematic morphological evolution. It was microscopically observed that Na{sub 2}ZrO{sub 3} particles tend to fracture due to the Na{sub 2}CO{sub 3} formation. Later, after several cycles these tiny fractured particles sinter producing new polyhedral and dense Na{sub 2}ZrO{sub 3}–ZrO{sub 2} particles. Finally, an exhaustive kinetic analysis showed a high CO{sub 2} chemisorption–desorption stability at different temperatures. - Graphical abstract: A CO{sub 2} chemisorption–desorption analysis was performed in the Na{sub 2}ZrO{sub 3}–CO{sub 2} system. Different cyclic experiments were performed between 500 and 800 °C and the results showed high CO{sub 2} chemisorption efficiencies. Nevertheless the Na{sub 2}ZrO{sub 3} composition and microstructure evolved during the cycles. Highlights: • Different CO{sub 2} chemisorption–desorption cycles were performed in the Na{sub 2}ZrO{sub 3} phase. • Na{sub 2}ZrO{sub 3} presents interesting microstructural changes depending on temperature. • At T≤550 °C, Na{sub 2}ZrO{sub 3} presents the best cyclability due to microstructural factors. • At T≥600 °C, Na{sub 2}ZrO{sub 3} presents a partial decomposition after 20 cycles. • Na{sub 2}ZrO{sub 3} presents excellent CO{sub 2} cyclability properties.

36 MATERIALS SCIENCE↗

State-Constrained Optimal Control Problems of Impulsive Differential Equations

The present paper studies an optimal control problem governed by measure driven differential systems and in presence of state constraints. The first result shows that using the graph completion of the measure, the optimal solutions can be obtained by solving a reparametrized control problem of absolutely continuous trajectories but with time-dependent state-constraints. The second result shows that it is possible to characterize the epigraph of the reparametrized value function by a Hamilton-Jacobi equation without assuming any controllability assumption.

97 MATHEMATICS AND COMPUTING↗

Global Analysis of Helicity PDFs: past - present - future

We discuss the current status of the DSSV global analysis of helicity-dependent parton densities. A comparison with recent semi-inclusive DIS data from COMPASS is presented, and constraints on the polarized strangeness density are examined in some detail.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microscopic properties of degradation-free capped GdN thin films studied by electron spin resonance

The microscopic magnetic properties of high-quality GdN thin films have been investigated by electron spin resonance (ESR) and ferromagnetic resonance (FMR) measurements. Detailed temperature dependence ESR measurements have shown the existence of two ferromagnetic components at lower temperatures, which was not clear from the previous magnetization measurements. The temperature, where the resonance shift occurs for the major ferromagnetic component, seems to be consistent with the Curie temperature obtained from the previous magnetization measurement. On the other hand, the divergence of line width is observed around 57 K for the minor ferromagnetic component. The magnetic anisotropies of GdN thin films have been obtained by the analysis of FMR angular dependence observed at 4.2 K. Combining the X-ray diffraction results, the correlation between the magnetic anisotropies and the lattice constants is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collectivity of plasmonic excitations in small sodium clusters with ring and linear structures

The collectivity of the electronic motion in finite systems is studied by using both the linear response density functional theory (LRDFT) and the collectivity index defined by the transition density matrix. We demonstrate a collectivity analysis on the size-dependent peaks of electronic excitations of small sodium clusters (rings and linear chains). We find the excitation-mode dependence of the collectivity and large collectivities for the higher-energy plasmonic excitations. The collectivity analysis also clarifies the existence of the nondipolar collective motion at the energies very close to the higher-energy plasmonic excitations. The importance of the nondipolar motion is pointed out in light of nano-optics.

74 ATOMIC AND MOLECULAR PHYSICS↗

Gluon helicity from global analysis of experimental data and lattice QCD Ioffe time distributions

We perform a new global analysis of spin-dependent parton distribution functions with the inclusion of Ioffe time pseudodistributions computed in lattice QCD (LQCD), which are directly sensitive to the gluon helicity distribution, Δ g . These lattice data have an analogous relationship to parton distributions as do experimental cross sections, and can be readily included in global analyses. We focus in particular on the constraining capability of current LQCD data on the sign of Δ g at intermediate parton momentum fractions x , which was recently brought into question by analysis of data in the absence of parton positivity constraints. We find that present LQCD data cannot discriminate between positive and negative Δ g solutions, although significant changes in the solutions for both the gluon and quark sectors are observed. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ways and peculiarities of submillimeter wavelength detection with short-channel field-effect transistors

The detection properties of some short-channel field-effect transistors (FETs) have been analyzed using the steady-state output characteristics of these devices. The calculated dependences of voltage-power sensitivity on applied voltage are compared with the corresponding curves obtained from high-frequency measurements. It is shown that the nonmonotonic dependence of the FET photosensitivity on gate voltage that is observed in the frequency range of 400-750 GHz is not related to resonant excitation of 2D plasmons in the subgate plasma but is due to the change in the distribution of stationary fields in the structure and, as a result, to the change in the efficiency of nonresonant nonlinearity procedures in the transistor's electron subsystem with an increase in the gate-channel voltage. This conclusion is confirmed by analysis of the frequency dependences of photoresponse in the range under consideration, which do not exhibit resonant behavior at the frequencies corresponding to the peaks in the curves measured at a fixed frequency and different gate voltages.

36 MATERIALS SCIENCE↗

Thickness dependent electronic structure of La{sub 0.6}Sr{sub 0.4}MnO{sub 3} layer in SrTiO{sub 3}/La{sub 0.6}Sr{sub 0.4}MnO{sub 3}/SrTiO{sub 3} heterostructures studied by hard x-ray photoemission spectroscopy

The authors have investigated changes in the electronic structures of digitally controlled La{sub 0.6}Sr{sub 0.4}MnO{sub 3} (LSMO) layers sandwiched between SrTiO{sub 3} as a function of LSMO layer thickness in terms of hard x-ray photoemission spectroscopy (HX-PES). The HX-PES spectra show the evolution of Mn 3d derived states near the Fermi level and the occurrence of metal-insulator transition at 8 ML. The detailed analysis for the thickness dependent HX-PES spectra reveals the existence of the less conducting and nonmagnetic transition layer with a film thickness of about 4 ML in the interface region owing to significant interaction through the interface.

36 MATERIALS SCIENCE↗

The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene

Ultra-cold neutrons (UCN) from the LANSCE super-thermal deuterium source were used to fill an acrylic bottle coated with deuterated polystyrene. The bottle was constructed to minimize losses through the filling valve. The storage time was extracted from a series of measurements where the number of neutrons was counted after they were held in the bottle for durations varying from 60-1200 s. The data were collected at temperatures of 18, 40, 65, 105, and 295 K. The data has been analyzed in terms of the ratio of the imaginary to real part of the wall potential. The analysis considers the velocity dependence of the probability per bounce of wall loss. The implication of these measurements for the SNS electric dipole moment search will be presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron elevator: Excitations across the band gap via a dynamical gap state

We use time-dependent density functional theory to study self-irradiated Si. We calculate the electronic stopping power of Si in Si by evaluating the energy transferred to the electrons per unit path length by an ion of kinetic energy from 1 eV to 100 keV moving through the host. Electronic stopping is found to be significant below the threshold velocity normally identified with transitions across the band gap. A structured crossover at low velocity exists in place of a hard threshold. Lastly, an analysis of the time dependence of the transition rates using coupled linear rate equations enables one of the excitation mechanisms to be clearly identified: a defect state induced in the gap by the moving ion acts like an elevator and carries electrons across the band gap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum resonance of nanometre-scale metal-ZnO-metal structure and its application in sensors

Analysis of the thickness dependence of the potential profile of the metal-ZnO-metal (MZM) structure has been conducted based on Poisson’s equation and Schottky theory. Quantum scattering theory is then used to calculate the transmission probability of an electron passing through the MZM structure. Results show that the quantum resonance (QR) effect becomes pronounced when the thickness of the ZnO film reaches to around 6 nm. Strain induced piezopotentials are considered as biases to the MZM, which significantly changes the QR according to the analysis. This effect can be potentially employed as nanoscale strain sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structures and pseudogap nature of the strongly correlated Kondo semimetals and insulators CeNiSn and CeRhX(X=As, Sb)

Employing temperature (T)-dependent angle-resolved photoemission spectroscopy (ARPES) near the Ce 4d absorption edge, we have investigated the electronic structures of the strongly correlated Kondo insulators (KIs) and/or Kondo semimetals of CeNiSn and CeRhX (X=As, Sb), which also belong to potential topological KIs (TKIs). Good agreement is found between the Fermi surfaces (FSs) measured at the Ce 4d→4f on resonance and those calculated and unfolded into the Ce-only Brillouin zone, supporting the crucial Ce 4f contribution to the Fermi-edge states in them. While the FSs of CeRhSb and CeNiSn are similar to each other, they are quite different from those of CeRhAs, which is understood to originate from the semimetallic Kondo ground states of CeNiSn and CeRhSb in contrast to the insulating Kondo ground state of CeRhAs. T-dependent ARPES demonstrates the existence of the Kondo resonance above the Fermi level (EF) and its T-driven decoherence in CeNiSn and CeRhSb, and the existence of the Ce 4f Kondo-like peak well below EF with a pseudogap in CeRhAs. With increasing T, the tail of the Kondo resonance in CeNiSn and CeRhSb loses its coherence, whereas the Ce 4f Kondo-like peak in CeRhAs persists up to T≥200 K. The Kondo temperatures (TKs) are estimated via the analysis of T-dependent ARPES, yielding TK≈80 K (CeNiSn), TK≈180 K (CeRhSb), and TK≫200 K (CeRhAs). High-resolution, low-T ARPES confirms the Kondo resonance just above EF in CeNiSn and CeRhSb Kondo semimetals and the KI ground state of CeRhAs with a pseudogap of Δ≈30 meV, demonstrating the importance of the coherent Kondo states in determining their potential topological properties. The differences in the T-dependent ARPES of CeNiSn and CeRhSb suggest the weaker f-c hybridization in CeNiSn than in CeRhSb (c: conduction electron), which is likely due to the more localized Ni 3d orbitals than the delocalized Rh 4d orbitals. The differences between the T-dependent ARPES of CeNiSn/CeRhSb Kondo semimetals and those of CeRhAs Kondo insulator are likely due to the smaller volume of CeRhAs than those of CeNiSn/CeRhSb.

Kang, J-S↗

Effect of momentum dependent interactions and nucleonic cross-section on directed flow (v{sub 1})

The descriptive analysis for the effect of momentum dependent interactions and nucleonic cross-section (isospin dependent and isospin-independent) on the neutron–proton directed flow (v{sub 1}), within the framework of the isospin dependent quantum molecular dynamics model is presented. Our study shows that, the directed flow of both neutrons and protons is affected by the momentum dependence of nuclear equation of state and the isospin dependence of nucleon–nucleon cross-section. A soft momentum dependent (SM) equation of state is found to be more compatible with the experimental data. -- Highlights: •Role of rapidity cut on transverse flow has been explored. •p{sub t} differential flow for protons and neutrons has been studied. •Role of MDI on directed flow has been studied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗