Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrodynamic efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Modeling Dust Production, Growth, and Destruction in Reionization-era Galaxies with the CROC Simulations. II. Predicting the Dust Content of High-redshift Galaxies

Abstract We model the interstellar dust content of the reionization era with a suite of cosmological, fluid-dynamical simulations of galaxies with stellar masses ranging from ∼10 5 to 10 9 M ⊙ in the first 1.2 Gyr of the Universe. We use a post-processing method that accounts for dust creation and destruction processes, allowing us to systematically vary the parameters of these processes to test whether dust-dependent observable quantities of galaxies at these epochs could be useful for placing constraints on dust physics. We then forward model observable properties of these galaxies to compare to existing data. We find that we are unable to simultaneously match existing observational constraints with any one set of model parameters. Specifically, the models that predict the largest dust masses D / Z ≳ 0.1 at z = 5—because of high assumed production yields and/or efficient growth via accretion in the interstellar medium—are preferred by constraints on total dust mass and infrared (IR) luminosities, but these models produce far too much attenuation in the ultraviolet (UV), preventing them from matching observations of β UV . To investigate this discrepancy, we analyze the relative spatial distribution of stars and dust as probed by IR and UV emission, which appear to exhibit overly symmetric morphologies compared to existing data, likely due to the limitations of the stellar feedback model used in the simulations. Our results indicate that the observable properties of the dust distribution in high redshift galaxies are a particularly strong test of stellar feedback.

79 ASTRONOMY AND ASTROPHYSICS↗

THE INTERNAL-COLLISION-INDUCED MAGNETIC RECONNECTION AND TURBULENCE (ICMART) MODEL OF GAMMA-RAY BURSTS

The recent Fermi observation of GRB 080916C shows that the bright photosphere emission associated with a putative fireball is missing, which suggests that the central engine likely launches a Poynting-flux-dominated (PFD) outflow. We propose a model of gamma-ray burst (GRB) prompt emission in the PFD regime, namely, the Internal-Collision-induced MAgnetic Reconnection and Turbulence (ICMART) model. It is envisaged that the GRB central engine launches an intermittent, magnetically dominated wind, and that in the GRB emission region, the ejecta is still moderately magnetized (e.g., 1 {approx}< {sigma} {approx}< 100). Similar to the internal shock (IS) model, the mini-shells interact internally at the radius R{sub IS} {approx} {Gamma}{sup 2} c{Delta}t. Most of these early collisions, however, have little energy dissipation, but serve to distort the ordered magnetic field lines entrained in the ejecta. At a certain point, the distortion of magnetic field configuration reaches the critical condition to allow fast reconnection seeds to occur, which induce relativistic MHD turbulence in the interaction regions. The turbulence further distorts field lines easing additional magnetic reconnections, resulting in a runway release of the stored magnetic field energy (an ICMART event). Particles are accelerated either directly in the reconnection zone, or stochastically in the turbulent regions, which radiate synchrotron photons that power the observed gamma rays. Each ICMART event corresponds to a broad pulse in the GRB light curve, and a GRB is composed of multiple ICMART events. This model retains the merits of IS and other models, but may overcome several difficulties/issues faced by the IS model (e.g., low efficiency, fast cooling, electron number excess, Amati/Yonetoku relation inconsistency, and missing bright photosphere). Within this model, the observed GRB variability timescales could have two components, one slow component associated with the central engine time history, and another fast component associated with relativistic magnetic turbulence in the emission region. The model predicts a decrease of gamma-ray polarization degree and E{sub p} in each ICMART event (broad pulse) during the prompt GRB phase, as well as a moderately magnetized external reverse shock. The model may be applied to the GRBs that have time-resolved, featureless Band-function spectra, such as GRB 080916C and most GRBs detected by Fermi LAT.

79 ASTRONOMY AND ASTROPHYSICS↗

Relativistic, Viscous, Radiation Hydrodynamic Simulations of Geometrically Thin Disks. I. Thermal and Other Instabilities

We introduce results from two-dimensional, general relativistic, viscous, radiation hydrodynamic numerical simulations of Shakura–Sunyaev thin disks accreting onto stellar-mass Schwarzschild black holes. We consider cases on both the gas- and radiation-pressure-dominated branches of the thermal equilibrium curve, with mass accretion rates spanning the range from $\dot{M}=0.01{L}_{\mathrm{Edd}}/{c}^{2}$ to 10L Edd/c 2 . The simulations directly test the stability of this standard disk model on the different branches. We find clear evidence of thermal instability for all radiation-pressure-dominated disks, resulting universally in the vertical collapse of the disks, which in some cases then settle onto the stable, gas-pressure-dominated branch. Although these results are consistent with decades-old theoretical predictions, they appear to be in conflict with available observational data from black hole X-ray binaries. Additionally, we find evidence for a radiation-pressure-driven instability that breaks the unstable disks up into alternating rings of high and low surface density on a timescale comparable to the thermal collapse. Since radiation is included self-consistently in the simulations, we are able to calculate light curves and power density spectra (PDS). Mostly, we measure radiative efficiencies (ratio of luminosity to mass accretion rate) close to 6%, as expected for a nonrotating black hole. The PDS appear as broken power laws, with a break typically around 100 Hz. There is no evidence of significant excess power at any frequencies, i.e., no quasi-periodic oscillations are observed.

79 ASTRONOMY AND ASTROPHYSICS↗

LONG-TERM EVOLUTION OF SLOWLY ROTATING COLLAPSAR IN SPECIAL RELATIVISTIC MAGNETOHYDRODYNAMICS

We present our numerical results of two-dimensional magnetohydrodynamic (MHD) simulations of the collapse of rotating massive stars in light of the collapsar model of gamma-ray bursts (GRBs). Pushed by recent evolution calculations of GRB progenitors, we focus on lower angular momentum of the central core than those taken mostly in previous studies. By performing special relativistic simulations including both realistic equation of state and neutrino cooling, we follow a long-term evolution of the slowly rotating collapsars up to approx10 s, accompanied by the formation of jets and accretion disks. Our results show that for the GRB progenitors to function as collapsars, there is a critical initial angular momentum, below which matter is quickly swallowed to the central objects, no accretion disks and no MHD outflows are formed. When larger than the criteria, we find the launch of the MHD jets in the following two ways. For models with stronger initial magnetic fields, the magnetic pressure amplified inside the accretion disk can drive the MHD outflows, which makes the strong magnetic explosions like a 'magnetic tower'. For models with weaker initial magnetic fields, the magnetic tower stalls first and the subsequent MHD outflows are produced by the magnetic twisting of the turbulent inflows of the accreting material from the equatorial to the polar regions. Regardless of the difference in the formation, the jets can attain only mildly relativistic speeds with the explosion energy less than 10{sup 49} erg. To obtain stronger neutrino energy depositions in the polar funnel regions heated from the accretion disk, we find that smaller initial angular momentum is favorable. This is because the gravitational compression makes the temperature of the disk higher. Due to high neutrino opacity inside the disk, we find that the luminosities of nu {sub e} and nu-bar {sub e} become almost comparable, which is advantageous for making the energy deposition rate larger. We discuss how the energy deposition can be as efficient as the magnetically driven processes for energetizing jets. Among the computed models, we suggest that the model with the initial angular momentum of j approx 1.5j {sub lso} (j {sub lso}: the angular momentum of the last stable orbit) and with initial magnetic field strength of approx10{sup 10} G, provides a most plausible condition for making fireballs for GRBs, because such model is appropriate not only for producing the MHD outflows quickly by the magnetic towers, but also for obtaining the stronger neutrino heating in the evacuated polar funnel.

79 ASTRONOMY AND ASTROPHYSICS↗

Entropy production rate in tokamaks with nonaxisymmetric magnetic fields

A variational principle based on an extremum of entropy production rate is derived for an integrable Hamiltonian system in the presence of two perturbations, which are resonant on neighboring or identical resonant surfaces. This method can be used to calculate the neoclassical transport in a magnetic fusion device with a nonaxisymmetric magnetic field. When applied to a tokamak with ripple, it provides an efficient means to discriminate between various regimes, depending on collisionality and ripple amplitude. This technique provides a means to test simplified collision operators suitable for gyrokinetic codes. It is found that these operators need only satisfy modest requirements in order to recover the correct neoclassical equilibrium, at least in the large aspect ratio limit. Finally, it appears that the toroidal viscous damping rate due to ripple is usually not negligible, thus removing the degeneracy between the radial electric field and the toroidal velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding the deficiency in inertial confinement fusion hohlraum x-ray flux predictions using experiments at the National Ignition Facility

The predicted implosion performance of deuterium-tritium fuel capsules in indirect-drive inertial confinement fusion experiments relies on precise calculations of the x-ray drive in laser-heated cavities (hohlraums). This requires accurate, spectrally dependent simulations of laser to x-ray conversion efficiencies and x-ray absorption losses to the hohlraum wall. A set of National Ignition Facility experiments have identified a cause for the long-standing hohlraum “drive deficit” as the overprediction of gold emission at ~2.5 keV in nonlocal thermodynamic equilibrium coronal plasma regions within the hohlraum. Finally, reducing the emission and absorption opacity in this spectral region by ~20% brings simulations into agreement with measured x-ray fluxes and spectra.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Constraining the Milky Way Mass Profile with Phase-space Distribution of Satellite Galaxies

We estimate the Milky Way (MW) halo properties using satellite kinematic data including the latest measurements from Gaia DR2. With a simulation-based 6D phase-space distribution function (DF) of satellite kinematics, we can infer halo properties efficiently and without bias, and handle the selection function and measurement errors rigorously in the Bayesian framework. Applying our DF from the EAGLE simulation to 28 satellites, we obtain an MW halo mass of $M={1.23}_{-0.18}^{+0.21}\times {10}^{12}{M}_{\odot }$ and a concentration of $c={9.4}_{-2.1}^{+2.8}$ with the prior based on the M–c relation. The inferred mass profile is consistent with previous measurements but with better precision and reliability due to the improved methodology and data. Potential improvement is illustrated by combining satellite data and stellar rotation curves. Using our EAGLE DF and best-fit MW potential, we provide much more precise estimates of the kinematics for those satellites with uncertain measurements. Compared to the EAGLE DF, which matches the observed satellite kinematics very well, the DF from the semi-analytical model based on the dark-matter-only simulation Millennium II (SAM-MII) over-represents satellites with small radii and velocities. We attribute this difference to less disruption of satellites with small pericenter distances in the SAM-MII simulation. Finally, by varying the disruption rate of such satellites in this simulation, we estimate a ~5% scatter in the inferred MW halo mass among hydrodynamics-based simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

THE DELAY OF POPULATION III STAR FORMATION BY SUPERSONIC STREAMING VELOCITIES

It has recently been demonstrated that coherent relative streaming velocities of order 30 km s{sup -1} between dark matter and gas permeated the universe on scales below a few Mpc directly after recombination. Here we use a series of high-resolution moving-mesh calculations to show that these supersonic motions significantly influence the virialization of the gas in minihalos and delay the formation of the first stars. As the gas streams into minihalos with bulk velocities around 1 km s{sup -1} at z {approx} 20, the additional momentum and energy input reduces the gas fractions and central densities of the halos, increasing the typical virial mass required for efficient cooling by a factor of three and delaying Population III star formation by {Delta}z {approx_equal} 4. Since the distribution of the magnitude of the streaming velocities is narrowly peaked around a non-negligible value, this effect is important in most regions of the universe. As a consequence, the increased minimum halo mass implies a reduction of the absolute number of minihalos that can be expected to cool and form Population III stars by up to an order of magnitude. We further find that the streaming velocities increase the turbulent velocity dispersion of the minihalo gas, which could affect its ability to fragment and hence alter the mass function of the first stars.

79 ASTRONOMY AND ASTROPHYSICS↗

How AGN and SN Feedback Affect Mass Transport and Black Hole Growth in High-redshift Galaxies

Using cosmological hydrodynamical simulations, we study the effect of supernova (SN) and active galactic nucleus (AGN) feedback on the mass transport (MT) of gas onto galactic nuclei and the black hole (BH) growth down to redshift z∼6. We study the BH growth in relation to the MT processes associated with gravity and pressure torques and how they are modified by feedback. Cosmological gas funneled through cold flows reaches the galactic outer region close to freefall. Then torques associated with pressure triggered by gas turbulent motions produced in the circumgalactic medium by shocks and explosions from SNe are the main source of MT beyond the central ∼100 pc. Due to high concentrations of mass in the central galactic region, gravitational torques tend to be more important at high redshift. The combined effect of almost freefalling material and both gravity and pressure torques produces a mass accretion rate of order ∼1 M{sub ⊙} yr{sup −1} at approximately parsec scales. In the absence of SN feedback, AGN feedback alone does not affect significantly either star formation or BH growth until the BH reaches a sufficiently high mass of ∼10{sup 6} M{sub ⊙} to self-regulate. SN feedback alone, instead, decreases both stellar and BH growth. Finally, SN and AGN feedback in tandem efficiently quench the BH growth, while star formation remains at the levels set by SN feedback alone, due to the small final BH mass, ∼few times 10{sup 5} M{sub ⊙}. SNe create a more rarefied and hot environment where energy injection from the central AGN can accelerate the gas further.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi frame synchrotron radiography of pulsed power driven underwater single wire explosions

We present herein the first use of synchrotron-based phase contrast radiography to study pulsed-power driven high energy density physics experiments. Underwater electrical wire explosions have become of interest to the wider physics community due to their ability to study material properties at extreme conditions and efficiently couple stored electrical energy into intense shock waves in water. The latter can be shaped to provide convergent implosions, resulting in very high pressures (1-10 Mbar) produced on relatively small pulsed power facilities (100s of kA-MA). Multiple experiments have explored single-wire explosions in water, hoping to understand the underlying physics and better optimize this energy transfer process; however, diagnostics can be limited. Optical imaging diagnostics are usually obscured by the shock wave itself; and until now, diode-based X-ray radiography has been of relatively low resolution and rather a broad x-ray energy spectrum. Utilising phase contrast imaging capabilities of the ID19 beamline at the European Synchrotron Radiation Facility, we were able to image both the exploding wire and the shock wave. Probing radiation of 20-50 keV radiographed 200 μm tungsten and copper wires, in ~2-cm diameter water cylinders with resolutions of 8 μm and 32 μm. The wires were exploded by a ~30-kA, 500-ns compact pulser, and 128 radiographs, each with a 100-ps X-ray pulse exposure, spaced at 704 ns apart were taken in each experiment. Abel inversion was used to obtain the density profile of the wires, and the results are compared to two dimensional hydrodynamic and one dimensional magnetohydrodynamic simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron Bernstein Wave Studies in MST

The overdense plasma in an RFP prevents electromagnetic waves from propagating past the edge, however use of the electron Bernstein wave (EBW) has the potential to heat and drive current in the plasma. MHD simulations have demonstrated that resistive tearing mode stability is very sensitive to gradients in the edge current density profile allowing EBW to potentially be a stabilizing influence. A new MW level experiment is being commissioned on MST to evaluate the potential use of the EBW for current profile control on the RFP. The development of new equipment includes a 5.5 GHz klystron driven by a novel switchmode power supply. A quartz window has been constructed and coupling with a cylindrical molybdenum wave guide antenna has been studied. Due to the steep edge density gradient in the RFP, it is possible to efficiently couple to the EBW with O or X mode launch. The EBW is strongly damped at the electron cyclotron resonance where it couples to the electron gyromotion and alters the electron distribution. Either Fisch-Boozer or Ohkawa current drive mechanisms can be activated to drive off axis current in the plasma. Preliminary experiments have been performed to verify high power coupling and understand heating via observed x-ray emission when compared to Fokker-Plank modeling in CQL3D.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NON-IDEAL MHD EFFECTS AND MAGNETIC BRAKING CATASTROPHE IN PROTOSTELLAR DISK FORMATION

Dense, star-forming cores of molecular clouds are observed to be significantly magnetized. A realistic magnetic field of moderate strength has been shown to suppress, through catastrophic magnetic braking, the formation of a rotationally supported disk (RSD) during the protostellar accretion phase of low-mass star formation in the ideal MHD limit. We address, through two-dimensional (axisymmetric) simulations, the question of whether realistic levels of non-ideal effects, computed with a simplified chemical network including dust grains, can weaken the magnetic braking enough to enable an RSD to form. We find that ambipolar diffusion (AD), the dominant non-ideal MHD effect over most of the density range relevant to disk formation, does not enable disk formation, at least in two dimensions. The reason is that AD allows the magnetic flux that would be dragged into the central stellar object in the ideal MHD limit to pile up instead in a small circumstellar region, where the magnetic field strength (and thus the braking efficiency) is greatly enhanced. We also find that, on the scale of tens of AU or more, a realistic level of Ohmic dissipation does not weaken the magnetic braking enough for an RSD to form, either by itself or in combination with AD. The Hall effect, the least explored of these three non-ideal MHD effects, can spin up the material close to the central object to a significant, supersonic rotation speed, even when the core is initially non-rotating, although the spun-up material remains too sub-Keplerian to form an RSD. The problem of catastrophic magnetic braking that prevents disk formation in dense cores magnetized to realistic levels remains unresolved. Possible resolutions of this problem are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Consequences of Giant Impacts on Early Uranus for Rotation, Internal Structure, Debris, and Atmospheric Erosion

Here, we perform a suite of smoothed particle hydrodynamics simulations to investigate in detail the results of a giant impact on the young Uranus. We study the internal structure, rotation rate, and atmospheric retention of the post-impact planet, as well as the composition of material ejected into orbit. Most of the material from the impactor's rocky core falls in to the core of the target. However, for higher angular momentum impacts, significant amounts become embedded anisotropically as lumps in the ice layer. Furthermore, most of the impactor's ice and energy is deposited in a hot, high-entropy shell at a radius of ~3 R ⊕ . This could explain Uranus' observed lack of heat flow from the interior and be relevant for understanding its asymmetric magnetic field. We verify the results from the single previous study of lower resolution simulations that an impactor with a mass of at least 2 M ⊕ can produce sufficiently rapid rotation in the post-impact Uranus for a range of angular momenta. At least 90% of the atmosphere remains bound to the final planet after the collision, but over half can be ejected beyond the Roche radius by a 2 or 3 M ⊕ impactor. This atmospheric erosion peaks for intermediate impactor angular momenta (~3 × 10 36 kg m 2 s –1 ). Rock is more efficiently placed into orbit and made available for satellite formation by 2 M ⊕ impactors than 3 M ⊕ ones, because it requires tidal disruption that is suppressed by the more massive impactors.

79 ASTRONOMY AND ASTROPHYSICS↗

DISSIPATION EFFICIENCY IN TURBULENT CONVECTIVE ZONES IN LOW-MASS STARS

We extend the analysis of Penev et al. to calculate effective viscosities for the surface convective zones of three main-sequence stars of 0.775 M{sub sun}, 0.85 M{sub sun}, and the present day Sun. In addition, we also pay careful attention to all normalization factors and assumptions in order to derive actual numerical prescriptions for the effective viscosity as a function of the period and direction of the external shear. Our results are applicable for periods that are too long to correspond to eddies that fall within the inertial subrange of Kolmogorov scaling, but no larger than the convective turnover time, when the assumptions of the calculation break down. We find moderately anisotropic viscosity, scaling linearly with the period of the external perturbation, with its components having magnitudes between three and ten times smaller than the Zahn's prescription.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Designing, synthesizing, and modeling active fluids

We review recent advances in the design, synthesis, and modeling of active fluids. Active fluids have been at the center of many technological innovations and theoretical advances over the past two decades. Research on this new class of fluids has been inspired by the fascinating and remarkably efficient strategies that biological systems employ, leading to the development of biomimetic nano- and micro-machines and swimmers. The review encompasses active fluids on both the nano- and micro-scale. We start with examples of biological active systems before we discuss how experimentalists leverage novel propulsion mechanisms to power nano- and micro-machines. Furthermore, we then examine how the study of these far-from-equilibrium systems has prompted the development of new simulation methods and theoretical models in nonequilibrium physics to account for their mechanical, thermodynamic, and emergent properties. Recent advances in the field have paved the way for the design, synthesis, and modeling of autonomous systems at the nano- and micro-scale and opened the door to the development of soft matter robotics.

36 MATERIALS SCIENCE↗

CFD Simulations of a Regenerative Process for Carbon Dioxide Capture in Advanced Gasification Based Power Systems

This project describes the work carried out to prepare a highly reactive and mechanically strong MgO based sorbents and to develop a Population Balance Equations (PBE) approach to describe the evolution of the particle porosity distribution that is linked with Computational Fluid Dynamics (CFD) to perform simulations of the CO2 capture and sorbent regeneration. A large number of MgO-based regenerable sorbents were prepared using low cost and abundant dolomite as the base material. Among various preparation parameters investigated the potassium/magnesium (K/Mg) ratio was identified as the key variable affecting the reactivity and CO2 capacity of the sorbent. The optimum K/Mg ratio is about 0.15. The sorbent formulation HD52-P2 was identified as the “best” sorbent formulation and a large batch (one kg) of the sorbent was prepared for the detailed study. The results of parametric study indicate the optimum carbonation and regeneration temperatures are 360° and 500°C, respectively. The results also indicate that steam has a beneficial effect on the rate of carbonation and regeneration of the sorbent and that the reactivity and capacity of the sorbent decreases in the cycling process (sorbent deactivation). The results indicate that to achieve a high CO2 removal efficiency, the bed of sorbent should be operated at a temperature range of 370-410°C which also favors production of hydrogen through the WGS reaction. To describe the carbonation reaction kinetics of the MgO, the Variable Diffusivity shrinking core Model (VDM) was developed in this project, which was shown to accurately fit the experimental data. An important advantage of this model is that the changes in the sorbent conversion with time can be expressed in an explicit manner, which will significantly reduce the CFD computation time. A Computational Fluid Dynamic/Population Balance Equations (CFD/PBE) model was developed that accounts for the particle (sorbent) porosity distribution and a new version of the method of moments, called Finite size domain Complete set of trial functions Method Of Moments (FCMOM) was used to solve the population balance equations. The PBE model was implemented in a commercial CFD code, Ansys Fluent 13.0. The code was used to test the model in some simple cases and the results were verified against available analytical solution in the literature. Furthermore, the code was used to simulate CO2 capture in a packed-bed and the results were in excellent agreement with the experimental data obtained in the packed bed. The National Energy Laboratory (NETL) Carbon Capture Unit (C2U) design was used in simulate of the hydrodynamics of the cold flow gas/solid system (Clark et al.58). The results indicate that the pressure drop predicted by the model is in good agreement with the experimental data. Furthermore, the model was shown to be able to predict chugging behavior, which was observed during the experiment. The model was used as a base-case for simulations of reactive flow at elevated pressure and temperatures. The results indicate that by controlling the solid circulation rate, up to 70% CO2 removal can be achieved and that the solid hold up in the riser is one of the main factors controlling the extent of CO2 removal. The CFD/PBE simulation model indicates that by using a simulated syngas with a composition of 20% CO2, 20% H2O, 30% CO, and 30% H2, the composition (wet basis) in the reactor outlet corresponded to about 60% CO2 capture with and exit gas containing 65% H2. A preliminary base-case-design was developed for a regenerative MgO-based pre-combustion carbon capture process for a 500 MW IGCC power plant. To minimize the external energy requirement, an extensive heat integration network was developed in Aspen/HYSYS® to produce the steam required in the regenerator and heat integration. In this process, liquid CO2 produced at 50 atm can easily be pumped and sequestered or stored. The preliminary economic analyses indicate that the estimated cost of carbon v capture is in the range of $31-$44/ton, suggesting that a regenerative MgO-Based process can be a viable option for pre-combustion carbon dioxide capture in advanced gasification based power systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

THE CENTRAL SLOPE OF DARK MATTER CORES IN DWARF GALAXIES: SIMULATIONS VERSUS THINGS

We make a direct comparison of the derived dark matter (DM) distributions between hydrodynamical simulations of dwarf galaxies assuming a {Lambda}CDM cosmology and the observed dwarf galaxies sample from the THINGS survey in terms of (1) the rotation curve shape and (2) the logarithmic inner density slope {alpha} of mass density profiles. The simulations, which include the effect of baryonic feedback processes, such as gas cooling, star formation, cosmic UV background heating, and most importantly, physically motivated gas outflows driven by supernovae, form bulgeless galaxies with DM cores. We show that the stellar and baryonic mass is similar to that inferred from photometric and kinematic methods for galaxies of similar circular velocity. Analyzing the simulations in exactly the same way as the observational sample allows us to address directly the so-called cusp/core problem in the {Lambda}CDM model. We show that the rotation curves of the simulated dwarf galaxies rise less steeply than cold dark matter rotation curves and are consistent with those of the THINGS dwarf galaxies. The mean value of the logarithmic inner density slopes {alpha} of the simulated galaxies' DM density profiles is {approx}-0.4 {+-} 0.1, which shows good agreement with {alpha} = -0.29 {+-} 0.07 of the THINGS dwarf galaxies. The effect of non-circular motions is not significant enough to affect the results. This confirms that the baryonic feedback processes included in the simulations are efficiently able to make the initial cusps with {alpha} {approx}-1.0 to -1.5 predicted by DM-only simulations shallower and induce DM halos with a central mass distribution similar to that observed in nearby dwarf galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Studying converging shock collisions in novel hybrid-drive shock ignition geometries

Recent Inertial Confinement Fusion (ICF) experiments using a “high-foot” implosion at the National Ignition Facility (NIF) have demonstrated the importance of hydrodynamic stability in these systems by reaching the alpha heating regime and setting new records of energy gain. The high-foot platform is not predicted to achieve ignition, however, and consequently must sacrifice some stability for increased kinetic energy delivered to the fuel in experiments planned for the near future as an optimal, ignition achieving target design is searched for. Given that the high-foot fuel implosion velocity was measured to reach 310 km/s (390 TW, 1.8 MJ 3-­shock pulse) whereas the low-­foot, high mix implosions of the original National Ignition Campaign (NIC) reached 350 km/s (420 TW, 1.6 MJ 4-­shock pulse) with a predicted velocity requirement of 370 km/s (based on 2-­D simulations used to define an Ignition Threshold Factor) we are left with an extremely narrow margin for success just by optimizing between the high and low-foot platforms. There is hope that alternate ablators will also provide some performance improvements, but it appears likely that no manifestation of the conventional indirect-­drive central hotspot implosion scheme (C-­ICF) will work with the current available facility energy. This by itself motivates the need to seek alternate fuel assembly concepts that can be fielded on NIF in the near future. At a fundamental level Shock Ignition (SI) is predicted to make more efficient use of the total energy available from the driver (i.e. NIF or OMEGA) and to result in higher gains needed for energy production, which makes it a likely candidate as an alternative ignition approach. The direct irradiation of the capsule to drive the implosion, however, is untested at ignition-­scale and poses numerous difficulties on NIF. If the implosion was driven using a hohlraum (indirectly) instead followed by direct laser irradiation of the imploded capsule to launch the ignitor shock (as illustrated in the upper panel of Fig. 1) then this form of Shock Ignition could fit well into the NIF environment. The primary objective of this project is to develop and test a hybrid drive implosion concept on OMEGA to study its merits and weaknesses for eventual trial on NIF. A key question that remains with regards to Shock Ignition, in general, is the effect of low­-mode asymmetries on the transfer of energy during collision of the rebounding and ignitor shocks. Our second objective is to field a directed experiment designed to study asymmetric converging shock collision and their effect on hot spot formation. The proposed experiments are part of a current LANL Laboratory Directed Research and Development (LDRD) project that we are using to develop ignition-scale designs as well as for designing and carrying out the first implosion experiments as discussed below.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗