Search NASA⌕ Search

SEARCH · Search NASA

Results for “implicit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Application of two-point difference schemes to the conservative Euler equations for one-dimensional flows

An implicit finite difference method is presented for obtaining steady state solutions to the time dependent, conservative Euler equations for flows containing shocks. The method used the two-point differencing approach of Keller with dissipation added at supersonic points via the retarded density concept. Application of the method to the one-dimensional nozzle flow equations for various combinations of subsonic and supersonic boundary conditions shows the method to be very efficient. Residuals are typically reduced to machine zero in approximately 35 time steps for 50 mesh points. It is shown that the scheme offers certain advantages over the more widely used three-point schemes, especially in regard to application of boundary conditions.

Wornom, S. F.↗

A new numerical method for the simulation of three dimensional flow in a pipe

A new numerical technique for simulating three dimensional, unsteady, incompressible pipe flows is presented and its utility and accuracy is shown. Each vector function in the expansion of the velocity field is divergence free and satisfies the boundary conditions for viscous flow. Some of the benefits of the expansion technique are that pressure is eliminated from the dynamics, only two unknowns per mesh point are required, implicit treatment of the viscous terms is provided at no extra computational cost, and no fractional time steps are required. The method uses spectral expansions: Fourier series in the azimuthal and streamwise directions, and Jacobi polynominals in the radial direction.

Leonard, A.↗

Numerical simulation of the magnetospheric gate model for X-ray bursters

A Lagrangian, fully implicit, one dimensional hydrodynamic computer code was used to investigate the evolution of a gas cloud impacting the surface of a 20 km, 1 Msub solar neutron star. This gas is initially at rest with respect to the surface of the neutron star, extends to 185 km above the surface, and is optically thick. The infall results in a burst which lasts about 0.1 seconds and reached a peak luminosity and effective temperature of 240,000 Lsub solar and 9 million; respectively. The burst was followed by a phase of oscillations with a period 0.2 seconds.

Starrfield, S. G.↗

Thermonuclear runaways in thick hydrogen rich envelopes of neutron stars

A Lagrangian, fully implicit, one dimensional hydrodynamic computer code was used to evolve thermonuclear runaways in the accreted hydrogen rich envelopes of 1.0 Msub solar neutron stars with radii of 10 km and 20 km. Simulations produce outbursts which last from about 750 seconds to about one week. Peak effective temeratures and luninosities were 26 million K and 80 thousand Lsub solar for the 10 km study and 5.3 millison and 600 Lsub solar for the 20 km study. Hydrodynamic expansion on the 10 km neutron star produced a precursor lasting about one ten thousandth seconds.

Starrfield, S. G.↗

Recent applications of the transonic wing analysis computer code, TWING

An evaluation of the transonic-wing-analysis computer code TWING is given. TWING utilizes a fully implicit approximate factorization iteration scheme to solve the full potential equation in conservative form. A numerical elliptic-solver grid-generation scheme is used to generate the required finite-difference mesh. Several wing configurations were analyzed, and the limits of applicability of this code was evaluated. Comparisons of computed results were made with available experimental data. Results indicate that the code is robust, accurate (when significant viscous effects are not present), and efficient. TWING generally produces solutions an order of magnitude faster than other conservative full potential codes using successive-line overrelaxation. The present method is applicable to a wide range of isolated wing configurations including high-aspect-ratio transport wings and low-aspect-ratio, high-sweep, fighter configurations.

Subramanian, N. R.↗

Computation of two-dimensional turbulent flow at subsonic Mach numbers over thick trailing edges

An implicit time marching finite difference method is used to predict two dimensional turbulent flow at a Reynolds number of 440,000 and a Mach number of 0.574 over a shortened NACA 0012 airfoil with a trailing edge of 4.5% thickness and semicircular shape. The flow is found to be unsteady but periodic in the trailing edge region. Thus, lift and drag fluctuate at small amplitudes around mean values and at distinct frequencies.

Drescher, P.↗

Computation of airfoil buffet boundaries

The ILLIAC IV computer has been programmed with an implicit, finite-difference code for solving the thin layer compressible Navier-Stokes equation. Results presented for the case of the buffet boundaries of a conventional and a supercritical airfoil section at high Reynolds numbers are found to be in agreement with experimentally determined buffet boundaries, especially at the higher freestream Mach numbers and lower lift coefficients where the onset of unsteady flows is associated with shock wave-induced boundary layer separation.

Levy, L. L., Jr.↗

Accelerated finite-volume calculation of transonic potential flows

A fully conservative finite-volume algorithm is used to calculate transonic potential flows past isolated airfoils and through two-dimensional channels. The difference equations are solved by a multigrid technique which uses an alternating direction implicit method as a smoothing algorithm. The finite-volume formulation provides a framework within which to treat flows past complicated geometries, while the multigrid/alternating direction scheme provides rapid convergence of the solution to very small residuals.

Jameson, A.↗

Accuracy and convergence of a finite element algorithm for turbulent boundary layer flow

The Galerkin-Weighted Residuals formulation is employed to derive an implicit finite element solution algorithm for the nonlinear parabolic partial differential equation system governing turbulent boundary layer flow. Solution accuracy and convergence with discretization refinement are quantized in several error norms using linear and quadratic basis functions. Richardson extrapolation is used to isolate integration truncation error in all norms, and Newton iteration is employed for all equation solutions performed in double-precision. The mathematical theory supporting accuracy and convergence concepts for linear elliptic equations appears extensible to the nonlinear equations characteristic of turbulent boundary layer flow.

Soliman, M. O.↗

Impingement of an oblique shock wave on a cylinder

This paper presents a numerical simulation of impingement of an oblique shock wave on a cylinder. The study was undertaken to understand the three-dimensional shock wave and boundary-layer interactions occurring on problems such as the impingement of the bow shock wave from the Shuttle nose on an external tank, and store-carriage interference on a supersonic tactical aircraft. A thin-layer approximation of the Navier-Stokes equations is solved by a mixed explicit-implicit scheme for a supersonic Mach 4 flow with an incident shock angle of 25 deg. Both laminar and turbulent flows are investigated. Surface pressures show large extents of upstream influence, except near windward plane. Based on plots of velocity at the first mesh points above the cylinder body, a conjectured limiting-streamline pattern is constructed. Three-dimensional separation is studied, and the role of crossflow is discussed.

Hung, C. M.↗

Numerical solution of transonic wing flow fields

A fast, fully implicit, approximate factorization algorithm designed to solve the conservative full-potential equation is used to compute lifting-wing flow fields with embedded transonic flow. The computer program (TWING - transonic wing analysis) uses an elliptic-solver numerical grid-generation routine and is capable of analyzing arbitrary wing geometries with sweep, twist, taper, and section variation. Computed flowfield results for several wing geometries are presented; they demonstrate substantial improvement in convergence speed relative to the FL028 computer code.

Holst, T. L.↗

Computation of viscous hypersonic flow over control surfaces

A parabolized Navier-Stokes (PNS) computer code has been used to compute hypersonic flow over control surfaces located on the aft end of generic re-entry configurations. The Beam-Warming implicit numerical algorithm as modified by Schiff and Steger is used to march in the spatial direction. The outer bow shock is treated as a sharp discontinuity; within the shock layer discontinuities are captured. Several different turbulent flow solutions were generated for flap angles varying from -7 deg to 15 deg and angles of attack varying from 0 deg to 20 deg. The present results are qualitatively correct when compared with previous compression corner studies.

Chaussee, D. S.↗

Computations of transonic flow over an oscillating airfoil with shock-induced separation

A numerical study is presented on unsteady transonic flow over an airfoil in pitching oscillation at a moderately high incidence. The study was focused on the effects of unsteady shock-wave/boundary-layer interactions and subsequent flow separations. An implicit finite-difference scheme was used to solve the full time-dependent compressible Navier-Stokes equations in conservation-law form. The algorithm adopted for this study is the Beam-Warming spatially factored scheme. It is, however, constructed in a body-fitted curvilinear coordinate system for efficient unsteady flow computations. The computational results are compared with experimental data measured in the Ames 11- by 11-Foot Transonic Wind Tunnel.

Chyu, W. J.↗

Three-dimensional flow calculations including boundary layer effects for supersonic inlets at angle of attack

An analysis is presented for calculating the steady three-dimensional flow field in supersonic mixed-compression inlets at incidence. A zonal modeling approach is employed to obtain the solution. The supersonic core flow is computed using a second-order pentahedral bicharacteristic algorithm. The bow shock wave and the reflected internal shock train are determined using a three-dimensional discrete shock fitting procedure. The boundary layer flow adjacent to both the centerbody and the cowl is computed using a second-order implicit finite difference method. The flow in a shock wave-boundary layer interaction region is computed using an integral formulation. The culmination of the present research effort is the development of a production-type computer program capable of analyzing flow in a variety of mixed-compression aircraft inlets. Numerical results and experimental correlations are presented to illustrate application of the analysis.

Vadyak, J.↗

A composite velocity procedure for the compressible Navier-Stokes equations

A new boundary-layer relaxation procedure is presented. In the spirit of the theory of matched asymptotic expansions, a multiplicative composite of the appropriate velocity representations for the inviscid and viscous regions is prescribed. The resulting equations are structured so that far from the surface of the body the momentum equations lead to the Bernoulli relation for the pressure, while the continuity equation reduces to the familiar compressible potential equation. Close to the body surface, the governing equations and solution techniques are characteristic of those describing interacting boundary-layers; although, the full Navier-Stokes equations are considered here. Laminar flow calculations for the subsonic flow over an axisymmetric boattail simulator geometry are presented for a variety of Reynolds and Mach numbers. A strongly implicit solution method is applied for the coupled velocity components.

Khosla, P. K.↗

Numerical simulation of viscous-inviscid interactions on indented nose tips

An implicit numerical algorithm to solve the unsteady thin-layer Navier-Stokes equations in a strong conservative form has been used to compute the viscous flow over indented nose tips placed in a supersonic free stream. Numerical solutions are presented for axisymmetric and three-dimensional indented configurations for laminar flow conditions. Results demonstrate the capability of the present numerical procedure to predict flow fields that contain strong viscous-inviscid interactions, including boundary-layer separation, reattachment, and embedded discontinuities. Comparisons with available experimental data for the shock shape and surface pressure are also given.

Rizk, Y. M.↗

Computation of nonlinear supersonic potential flow over three dimensional surfaces

A fully implicit three dimensional marching technique is presented for the computation of inviscid supersonic flows. The nonconservative full potential equation is solved on spherical cross flow planes using standard transonic SLOR techniques. The three dimensional bow shock is fitted as a boundary with isentropic jump conditions and embedded shocks are captured. Applications of these techniques are presented for three dimensional bodies, wings, and wing-body configurations and the computed solutions are compared to experimental pressure data. Zero lift wave drag calculations are also presented and compared with measurements to evaluate the accuracy of the present techniques.

Siclari, M. J.↗

Spatial reasoning in remotely sensed data

Photointerpreters employ a variety of implicit spatial models to provide interpretations from remotely sensed aerial or satellite imagery. In this paper one application is illustrated: how ridges and valleys can be automatically interpreted from Landsat imagery of a mountainous area, and how a relative elevation terrain model can be constructed from this interpretation. How to examine valleys for the possible presence of streams or rivers is shown, and how a spatial relational model can be set up to make a final interpretation of the river drainage network is explored.

Campbell, J.↗