Search NASA⌕ Search

SEARCH · Search NASA

Results for “improved microstructures and properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Demonstrate Improved Ag Diffusion and Describe the Basis for Pd Penetration Modeling in SiC

In past work, an effective diffusivity coefficient was determined for Ag transport through the silicon carbide layer of a tristructural isotropic fuel particle. The effective diffusivity coefficient accounts for the microstructure of the silicon carbide and includes both bulk diffusion and grain boundary diffusion of Ag. In this report, the model has been improved by accounting for the enhanced concentration of vacancies in the bulk due to irradiation, which substantially influence bulk diffusivity at low temperatures. To improve the BISON model and make it fission rate dependent, effective diffusivity calculations have been performed that incorporate the radiation modified bulk diffusivity. The microstructure and irradiation-dependent effective diffusivity has also been implemented into BISON, and its predictions for Ag release from tristructural isotropic fuel have been successfully compared to AGR-1 post irradiation measurements. Moreover, a new feature has been developed in the Multiphysics Object-Oriented Simulation Environment (MOOSE) to account for different grain boundary types. The Ag diffusivity in 5 (210)/[001] grain boundaries has been computed and was found to be greater than in random high-angle grain boundaries. The presence of the fission product Pd can also have an important effect on the properties of the silicon carbide layer in tristructural isotropic particles. The penetration of Pd into the silicon carbide layer causes a corrosion reaction that can lead to the failure of the silicon carbide layer; however, this corrosion reaction is not well understood. To enable an improved understanding of the mechanism, ab-initio molecular dynamics simulations of Pd interaction with bulk silicon carbide have been performed. The improved understanding of the reaction will form a basis for future improvements to the BISON’s Pd penetration failure model

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fundamental Understanding of Creep-Fatigue Interactions in 9Cr-1MoV Steel Welds. Final Report

Ferritic-martensitic steels constitute a vital class of materials for current and future generation of nuclear reactors as well as ultra supercritical coal fired power plants due to their superior creep resistant properties. One particular ferritic-martensitic steel, 9Cr-1MoV (Grade 91) is one of five materials approved for high temperature use in nuclear service by the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC). Grade 91 is also a candidate material for proposed fission and fusion reactors such as the sodium cooled fast reactor (SFR). In service, Grade 91 components can be subjected to elevated temperatures and cyclic stresses, leading to the accumulation of creep-fatigue (CF) damage. While the monotonic creep properties of Grade 91 steels have been studied extensively, there is less knowledge concerning the mechanisms governing CF damage of this steel in the creep-dominated failure region. Moreover, the creep failure is especially pronounced in welded Grade 91 components, which are commonly joined using conventional arc welding techniques such as flux-cored arc welding (FCAW). In a Grade 91 weld, the creep failure typically occurs in the outer region of the heat affected zone (HAZ), specifically in the intercritical or fine-grained heat-affected zone (ICHAZ or FGHAZ), a phenomenon known as type IV failure. Currently, there exists a limited knowledge of CF damage mechanisms in Grade 91 welds. Improving the mechanistic understanding of the CF damage and failure of Grade 91 steel and its welds with inhomogeneous microstructure is crucial for the safety and design of key structural components in advanced, high-temperature reactors. The overall objectives of the project were to advance the state of knowledge and understanding of CF damage in both Grade 91 base metal and its welds, especially under loading conditions where creep is the dominant damage mechanism. Uncovering the mechanisms governing the creep-fatigue deformation and damage in Grade 91 base metal in creep-dominated region as well as type IV failure in Grade 91 welds contributes to a new knowledge that may lead to more accurate life prediction models than those currently in use. Moreover, the superior CF properties obtained by low heat input welding has a high potential to develop practical solutions to the premature failure of Grade 91 weld.

36 MATERIALS SCIENCE↗

Interface-correlated bonding properties for a roll-bonded Ti/Al 2-ply sheet

Highlights: • The feasible post roll-bonding annealing condition of Ti/Al clad was deduced. • The optimum thickness of the TiAl{sub 3} IMC diffusive layer is about 200 nm. • A ‘zipper-like’ failure mode at the interface yields the maximum bonding strength. - Abstract: We investigated the influence of annealing conditions on the interface-correlated microstructural evolution and subsequent bonding properties of a warm roll-bonded Ti/Al clad sheet. A TiAl{sub 3} intermetallic compound layer with a thickness of 160 nm was initially generated at the joint interface between the Ti and Al alloys by warm rolling. When the annealing time and temperature were increased to a maximum of 6 h and 650 °C, respectively, the thickness of the TiAl{sub 3} layer increased to 320 nm. The feasible annealing conditions for the optimum bonding strength were within 550 °C-6 h and 600 °C-3 h. An improvement in the bonding strength between Ti and Al is strongly correlated with the generation of considerable metallurgical bonding. This is manifested in the zipper-like failure mode that occurs at the TiAl{sub 3} joint interface for a layer thickness of less than 300 nm.

36 MATERIALS SCIENCE↗

Crafting Multifunctional Materials with Tailored Mechanical and Magnetic Properties by Solid-State Non-equilibrium Processing

Aluminum matrix composites hold promise for creating lightweight structural components with multifunctional properties. Nonetheless, achieving desired magnetic or electrical characteristics without compromising their fundamental mechanical properties presents a significant challenge. Here, in this study, we explore mechanical stir-based extrusion as a solid-state metalworking technique to develop fine-grained microstructures and highly refined metallic composites. Our study focuses on creating a SmCo 5 -reinforced aluminum matrix composite using solid stir extrusion (SSE) and assessing its microstructure, mechanical, and magnetic properties through a comprehensive suite of characterization tools, including x-ray diffraction, electron microscopy, and magnetometry. Our findings reveal that incorporating a small amount (3.76 wt.%) of SmCo 5 phase in a non-heat-treatable, non-magnetic aluminum alloy via SSE yields a composite that exhibits good hard magnetic characteristics with a large coercivity (H ci = 13.5 kOe) and improved mechanical properties. This study underscores non-equilibrium processing via solid-state high-speed stirring as a compelling method for crafting multifunctional materials with tailored mechanical and magnetic properties.

36 MATERIALS SCIENCE↗

The shape recovery conditions for Fe–Mn–Si alloys: An interplay between martensitic transformation and plasticity

Highlights: • Fe15Mn5Si9Cr5Ni samples were rolled at 800 °C and annealed at 650 (C1) and 1000 °C (C2). • TEM analysis was performed. • High density of stacking faults and appropriate density of dislocation appears in C1. • Complex dislocation arrays due to plastic deformation are observed in C2. • Shape memory properties depend on the thermomechanical treatment. - Abstract: This work analyses the improvement of the shape memory properties of Fe-Mn-Si based alloys, and expands upon and deepens recently published developments concerning this topic. We prepared TEM specimens from a Fe-15Mn-5Si-9Cr-5Ni sheet rolled at 800 °C and annealed at 650 °C–92% shape recovery – and from another sheet annealed at 1000 °C–45% shape recovery. Here, we analyse the development of microstructure during the γ ↔ ε martensitic transformation and correlate it with the shape memory behaviour. Among the observed microstructural features, the introduction of complex dislocation arrays due to plastic deformation appears to be critical for shape memory development, since they can arrest the backward movement of Shockley partial dislocations over the original path. Tailoring the microstructure in order to introduce a high stacking-fault density accompanied by an appropriate dislocation density remains a key issue in the design of these kinds of functional materials.

36 MATERIALS SCIENCE↗

High-throughput multimodal exploration of a nanocrystalline Cu-Ag library

Sputter-deposited, nanocrystalline Cu-Ag thin films produced across a broad compositional and deposition-parameter space were evaluated to unravel the process-structure-property relationships important for creating hard, conductive electrical contacts and coatings. Combinatorial deposition involving pulsed direct current magnetron sputtering of elemental targets enabled swift examination of nearly the full range of alloy compositions and a relevant portion of deposition atomistics. Several high-throughput characterization modalities were employed to evaluate the chemistry, structure, and properties of the films. The resultant hardness, modulus, film density, crystal texture, and resistivity were analyzed in terms of key deposition characteristics (incident atom kinetic energy and incidence angle) predicted by binary-collision, kinematic Monte Carlo simulations. The study revealed improved hardness, parabolic resistivity dependence on composition, and compositional and process dependencies of film tarnishing. The results are discussed in the context of variations in microstructure and film density. Transmission electron microscopy and X-ray diffraction demonstrate several forms of compositional variation including solute segregation to grain boundaries as well as periodic, intragranular compositional modulations. Annealing of a Cu-rich alloy film exhibiting grain boundary segregation showed that this as-deposited, compositional variation is not stable above 100 °C. Finally, the Cu-Ag system is shown to have potential for hard, conductive, tarnish-resistant and room temperature-stable nanocrystalline thin films across the composition space.

36 MATERIALS SCIENCE↗

Evaluate Compatibility of Alloy 244 in NaCl-MgCl 2

Alloy 244 is a potential material of interest for molten salt reactor (MSR) developers employing molten chloride as fuel and coolant salts because of its improved mechanical properties compared to the austenitic stainless steel 316H and the Ni-base alloy Hastelloy-N. However, data are limited on the corrosion behavior of alloy 244 in molten chloride salts. Experimental data on the corrosion behavior of 244 in chloride salts will provide valuable data to MSR developers while simultaneously aiding in improving mechanistic understanding of the role of salt chemistry, alloying constituents and microstructure of 244. This task evaluated the compatibility of alloy 244 in two different eutectic NaCl–MgCl 2 salt mixtures. Similar corrosion behavior in terms of depths of attack and compositional changes in the alloy subsurface was observed after exposure in both salts for 500 h at 750°C. However, severe corrosion attack was observed after 500 h at 850°C in one of the chloride salt mixture. This was most likely due to the combined effects of the differences in the two salt chemistries, distinct microstructure of 244 at 850°C compared to 750°C, and the temperature dependence of the chemical interactions (thermodynamic and kinetic) between the alloying constituents.

36 MATERIALS SCIENCE↗

Laser shocking of 2024 and 7075 aluminum alloys

The effect of laser generated stress waves on the microstructure, hardness, strength and stress corrosion resistance of 2024 and 7075 aluminum alloys was investigated. Pulsed CO2 and neodymium-glass lasers were used to determine the effect of wavelength and pulse duration on pressure generation and material property changes. No changes in material properties were observed with CO2 laser. The strength and hardness of 2024-T351 and the strength of 7075-T73 aluminum alloys were substantially improved by the stress wave environments generated with the neodymium-glass laser. The mechanical properties of 2024-T851 and 7075-T651 were unchanged by the laser treatment. The correlation of the laser shock data with published results of flyer plate experiments demonstrated that a threshold pressure needed to be exceeded before strengthening and hardening could occur. Peak pressures generated by the pulsed laser source were less than 7.0 GPa which was below the threshold pressure required to change the mechanical properties of 2024-T851 and 7075-T651. Corrosion studies indicated that laser shocking increased the resistance to local attack in 2024-T351 and 7075-T651.

Clauer, A. H.↗

Structural characteristics and hydration kinetics of modified steel slag

This study investigates the structural characteristics and hydration kinetics of modified basic oxygen furnace steel slag. The basic oxygen furnace steel slag (BOFS) was mixed with electric arc furnace steel slag (EAFS) in appropriate ratios and heated again at high temperature in the laboratory. The mineralogical and structural characteristics of both BOFS and modified steel slag (MSS) were characterized by X-ray diffraction, optical microscopy, scanning electron microscopy, Raman and Fourier transform infrared spectroscopies. The results show that modification increases alite content in MSS and decreases alite crystal size with the formation of C{sub 6}AF{sub 2}. One more obvious heat evolution peak appears in MSS's heat-flow rate curves in comparison to BOFS, becoming similar to that of typical Portland cement paste. As a result, its cementitious activity is much improved.

36 MATERIALS SCIENCE↗

Evaluation of irradiation facility options for fusion materials research and development

Successful development of fusion energy will require the design of high-performance structural materials that exhibit dimensional stability and good resistance to fusion neutron degradation of mechanical and physical properties. The high levels of gaseous (H, He) transmutation products associated with deuterium-tritium (D-T) fusion neutron transmutation reactions, along with displacement damage dose requirements up to 50-200 displacements per atom (dpa) for a fusion demonstration reactor (DEMO), pose an extraordinary challenge. The intense neutron source(s) is needed to address two complimentary missions: 1) Scientific investigations of radiation degradation phenomena and microstructural evolution under fusion-relevant irradiation conditions (to provide the foundation for designing improved radiation resistant materials), and 2) Engineering database development for design and licensing of next-step fusion energy machines such as a fusion DEMO. A wide variety of irradiation facilities have been proposed to investigate materials science phenomena and to test and qualify materials for a DEMO reactor. Currently available and proposed facilities include fission reactors (including isotopic and spectral tailoring techniques to modify the rate of H and He production per dpa), dual- and triple-ion accelerator irradiation facilities that enable greatly accelerated irradiation studies with fusion-relevant H and He production rates per dpa within microscopic volumes, D-Li stripping reaction and spallation neutron sources, and plasma-based sources. The advantages and limitations of the main proposed fusion materials irradiation facility options are reviewed. Evaluation parameters include irradiation volume, potential for performing accelerated irradiation studies, capital and operating costs, similarity of neutron irradiation spectrum to fusion reactor conditions, temperature and irradiation flux stability/control, ability to perform multiple-effect tests (e.g., irradiation in the presence of a flowing coolant, or in the presence of complex applied stress fields), and technical maturity/risk of the concept. Ultimately, it is anticipated that heavy utilization of ion beam and fission neutron irradiation facilities along with sophisticated materials models, in addition to a dedicated fusion-relevant neutron irradiation facility, will be necessary to provide a comprehensive and cost-effective understanding of anticipated materials evolution in a fusion DEMO and to therefore provide a timely and robust materials database.

embrittlement↗

Three-dimensional analysis of the microstructure and bio-corrosion of Mg–Zn and Mg–Zn–Ca alloys

The effects of the morphology and the distribution of secondary phases on the bio-corrosion properties of magnesium (Mg) alloys are significant. Focused Ion Beam (FIB) tomography and Micro X-Ray computed tomography (Micro-CT) have been used to characterise the morphology and distribution of (α-Mg + MgZn) and (α-Mg + Ca{sub 2} + Mg{sub 6} + Zn{sub 3}) eutectic phase mixtures in as-cast Mg–3Zn and Mg–3Zn–0.3Ca alloys, respectively. There were two different 3D distributions: (i) an interconnected network and (ii) individual spheres. The tomography informed our understanding of the relationship between the distribution of secondary phases and the development of localized corrosion in magnesium alloys. - Highlights: • Multi-scale tomography was used to characterise the morphology and distribution of secondary phases in Mg alloys. • The development of localized corrosion was investigated using tomography. • An improved understanding of the microstructure and corrosion was achieved using Micro-CT tomography.

36 MATERIALS SCIENCE↗

High-Entropy Alloys for Accelerator Beam Window Applications

Development of novel high-entropy alloys (HEAs) is currently underway for potential use as beam windows in future multi-megawatt target systems at Fermilab. HEAs encompass a new class of materials with a vast design space allowing for material properties to be tailored for particular applications and to potentially offer improved resistance to beam-induced radiation damage and thermal shock effects. The alloy systems being studied consist of several compositions of AlCoCrMnTiV with 4 6 component elements. These alloys are all predicted by CALPHAD simulation to have a single-phase BCC crystal structure and low density, with some compositions displaying ordered, nanoscale precipitates. This presentation will briefly discuss alloy design and synthesis before giving a detailed description of the characterization studies of these HEAs in both the pristine state and post-irradiation by low-energy heavy ions to high damage levels. Electron microscopy techniques to quantify elemental homogeneity and composition, determine grain size, shape, and orientation, and quantify lattice parameters, defect structures and precipitate phases are all being used to study alloy microstructures. Mechanical properties of the alloys at the microscale will be reported. The evolution of these properties as a function of radiation damage will also be described. Bulk thermal characteristics of these HEAs have been tested to measure specific heat capacity and coefficient of thermal expansion as a function of temperature. To determine bulk tensile properties a miniature tensile testing apparatus is under development; it s commissioning will be covered briefly. The talk will conclude with our plans for alloy down-selection.

Burleigh, A. [Fermilab]↗

Effect of ECAP Die Angles on Microstructure Mechanical Properties and Corrosion Behavior of AZ80 Mg Alloy

In this article, the effect of channel angles on material properties was investigated during equal channel angular pressing of AZ80 magnesium alloy using processing route R at 325 °C processing temperature. Channel angles of 90° and 110° and common corner angle 30° have been considered for this study. It has been revealed that the channel angle has a significant influence on deformation homogeneity, microhardness, ultimate tensile strength, ductility and corrosion behavior of Mg alloys. Investigation with reference to as-received AZ80 Mg alloy indicates 18.47% improvement in UTS and 76.07% enhancement in ductility after processing through 3P-90° and 2P-110° ECAP, respectively. Also, the corrosion rate reduces to 89.47% after processing the sample with 3P-110° ECAP die.

36 MATERIALS SCIENCE↗

Transport–Friendly Microstructure in SSC–MEA: Unveiling the SSC Ionomer–Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short-side-chain perfluoro-sulfonic acid (SSC-PFSA) ionomer as the cathode binder, referred to as SSC-MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple-phase interface, unveiling the transport-friendly microstructure and transport mechanisms inherent in SSC-MEA. The SSC-MEA exhibits advantageous microstructural features, including a better-connected ionomer network and well-organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long-side-chain perfluoro-sulfonic acid (LSC-PFSA) ionomer, noted as LSC-MEA, SSC-MEA exhibits a notable peak power density (1.23 W cm –2 ), efficient O 2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology-transport-performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.

25 ENERGY STORAGE↗

Influences of Gd on the microstructure and strength of Mg-4.5Zn alloy

Microstructure and mechanical properties of peak-aged Mg-4.5Zn-xGd (x 0, 0.5, 1.0 and 1.5 wt.%) alloys have been investigated. The results showed that the grain size of the alloys was refined gradually with increasing Gd. Mg{sub 5}Gd and Mg{sub 3}Gd{sub 2}Zn{sub 3} phases were found in the Gd-containing alloys. The strengths were greatly improved with Gd additions, and the highest strength level was obtained in the Mg-4.5Zn-1.5Gd alloy, in which the ultimate tensile strength and yield strength were 231 MPa and 113 MPa, respectively. Through comparing with the Mg-4.5Zn alloy, the increments of ultimate tensile strength and yield strength were 22 MPa and 56 MPa, respectively. The improved strength was mainly correlated to the grain refining effect, the strengthening effect of the Mg{sub 5}Gd and Mg{sub 3}Gd{sub 2}Zn{sub 3} phases and also the hardening effect of the solutioned Gd atoms.

36 MATERIALS SCIENCE↗

Studies of solution-processed organic light-emitting diodes and their materials

A hitherto unexplored approach is presented in which a small molecule is used as a host to polymer guests in solution-processed OLEDs. We find that the small molecule host results in much more efficient devices than the often-used alternative polymer host when used for the guests presented. It is likely that nano- and microstructural differences between the hosts contribute to the improvements, which highlights some interesting characteristics that can help to better understand the nature of these mixtures. A number of the guests used in this study were newly synthesized benzobisoxazole-based copolymers. New organic copolymers are presented that are based on the chemical structure of benzobisoxazoles, which have been shown in the past to have good electron transporting properties. The novel concept in this publication pertains to a change in the direction of polymerization, also known as the conjugation pathway, which we show increases the emission efficiency. This work highlights a unique and useful property of organic semiconducting materials in that they can be synthesized to create the desired characteristics. Earlier work is described that kick-started in our research group the use of small molecules in solution-processed OLEDs. Originally these devices were to be used in magnetoresistance studies, but the project took a different path when the devices were more efficient than expected. The efficient use of small molecules in solution-processed OLEDs is highlighted, which at the time was not often the case. Also, the important observation of the effect of solvent choice on the resultant film is emphasized, with discussion of the likely cause of these effects. Microcavity OLEDs are introduced in which the transparent anode ITO is replaced with semi-transparent thin silver, which creates an optical cavity within the devices. The goal was to expand a previous work that created an on-chip spectrometer covering wavelengths 493 to 639 nm. In this case, a spin-coated mixed emitting layer (EML) is used, consisting of a polymer and a small molecule that both emit in the near UV and blue. The resulting combined spectra gives a wide band that can be used to create narrow microcavity emission peaks of 373 to 469 nm, depending on the device thickness (i.e. the cavity’s optical length). In the process of this effort, the mixed EML presented interesting complexities that we attempt to explain via simulation and morphology study.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DE-FE0026098 Final Report - Advanced Materials and Manufacturing Processes for SOFC Power Systems Revision 1

The aim of the project is to qualify an integrated material set and processing solution for selected metallic components of an advanced integrated stack block. As the integrated stack block is the “engine” of the solid oxide fuel cell power system, the project will also support significant cost reductions, increased reliability, and improved performance of the LG Fuel Cell Systems Inc. (“LGFCS”) cell and stack technology to be included in the initial commercial product offering. In the proposed work an integrated material set, and processing solution will be developed using powder metals processing which has been proven to be an enabling technology capable of delivering net or near net shape components, as well as for creating compositions, microstructures, and properties that are otherwise unattainable. Several advanced manufacturing processes will be screened to select one or more that are most advantageous for the selected metallic components when produced at commercial volumes. This work will be accomplished through the integration of metallurgists and processing engineers from Carpenter Technology, with the product design and cost engineers from LGFCS. The expected outcome of the proposed work is an optimized material set and processing solution that will reduce the current cost.

03 NATURAL GAS↗

Assessment and Planning of HFIR Test Articles

Burnable absorbers (BAs) are introduced into nuclear fuels to aid in controlling the activity of the irradiated fuel at the beginning of life in a light water reactor (LWR). This improves the efficiency of the reactor since it allows for higher enrichments (> 5 % 235 U) to be used in a LWR, which increases the burnup limit and therefore the cycle length. The purpose of the BA is to absorb neutrons to prevent power peaking, and the concentration of BA is consumed under irradiation. In order to understand the effect of the BAs on the microstructure and thermophysical properties of the fresh and irradiated fuel, neutron irradiation tests will be carried out at the High Flux Isotope Reactor (HFIR). These tests will include Gd 2 O 3 doped UO 2 fuels with concentrations that vary from 4 to 10 weight % Gd 2 O 3 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗