Search NASA⌕ Search

SEARCH · Search NASA

Results for “model development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Developing Practical Models of Complex Salts for Molten Salt Reactors

Molten salt reactors (MSRs) utilize salts as coolant or as the fuel and coolant together with fissile isotopes dissolved in the salt. It is necessary to therefore understand the behavior of the salts to effectively design, operate, and regulate such reactors, and thus there is a need for thermodynamic models for the salt systems. Molten salts, however, are difficult to represent as they exhibit short-range order that is dependent on both composition and temperature. A widely useful approach is the modified quasichemical model in the quadruplet approximation that provides for consideration of first- and second-nearest-neighbor coordination and interactions. Its use in the CALPHAD approach to system modeling requires fitting parameters using standard thermodynamic data such as phase equilibria, heat capacity, and others. A shortcoming of the model is its inability to directly vary coordination numbers with composition or temperature. Another issue is the difficulty in fitting model parameters using regression methods without already having very good initial values. The proposed paper will discuss these issues and note some practical methods for the effective generation of useful models.

Besmann, Theodore M. (ORCID:0000000155980550)↗
DOE OSTI2026

Reduced-Order Modeling of Hydrogen Releases from Vent Stacks and with Wind Effects

Here, the physical release behavior of hydrogen is important to understand from a safety and design perspective. The consequences of unignited pressurized gaseous hydrogen plumes exiting vent stacks were considered by extending and modifying existing general hydrogen plume models. Entrainment, vent stack backpressure, and the flow regime of hydrogen exiting the vent were found to be significant factors affecting plume shape and size, but further investigation and validation with unchoked, low-Froude-number flows is recommended to improve the model’s robustness. Additionally, models for the effects of wind on unignited plume momentum and entrainment were added to explore this behavior. Wind was assumed to increase mixing of hydrogen with the ambient air, and to affect the momentum of the released jet. Introducing wind into the plume model led to a shorter plume for all wind and jet directions. A high counter-flowing wind led to non-physical results and challenges in interpreting the visualization. The proposed jet plume wind sub-models (specifically entrainment coefficients) were fit and compared to experimental data of different releases of hydrogen into a wind tunnel, but the quantity of data available and experimental conditions were limited. Thus, collection of more empirical data and for a wider range of conditions is recommended for improvement of the proposed computational models. Developing reduced-order models for these physical phenomena can improve accessibility to predicted physical behavior and the rate at which hydrogen systems can be safely designed and deployed.

entrainment↗
NASA NTRS1974

Application of remote sensing for fishery resource assessment and monitoring

The author has identified the following significant results. A plot was drawn of the dolphin catch and the water discontinuities observed in the aerial photography. This plot was similar in format to the one made earlier on the white marlin catch relative to the water rips. Neither plot substantiates (as far as white marlin and dolphin are concerned) an opinion held by fishermen that better fishing may be found in the vicinity of the rips. Remotely inferred values for sea surface temperature, chlorophyll-a and turbidity were substituted for sea truth measurements in prediction models developed in previous analysis. Model performance, using the new values, was disappointing.

Savastano, K. J.↗
NASA NTRS1979

Numerical solution of compressible viscous flows

The presented review is concerned with the problem of calculating compressible viscous flows. Basic numerical considerations and problems associated with calculating viscous flows are examined and current numerical approaches toward the solution of the Navier-Stokes equations are discussed. It is pointed out that the numerical solution of the full time-dependent equations for turbulent flow is not practical with present computers. Therefore, turbulence effects must be accounted for by modeling. Developments related to turbulence modeling are described. In connection with a discussion of numerical methods for solving viscous flow equations, attention is given to numerical domains of dependence of typical explicit and implicit methods, the diffusion problem, the convection-diffusion problem, and the split-hybrid method.

Maccormack, R. W.↗
NASA NTRS1989

Further developments in modeling digital control systems with MA-prefiltered measurements

State variable representations are presented for a continuous-time plant driven by a zero-order-hold with multirate-sampled measurements prefiltered by multi-input/multi-output moving average (MA) processes. These representations have broad application, but are known to be useful in the aerospace field for modeling systems with star trackers and some state-of-the-art rate-gyroscopes and accelerometers.

Polites, Michael E.↗
NASA NTRS1990

Carbon deposition model for oxygen-hydrocarbon combustion. Task 6: Data analysis and formulation of an empirical model

The formation and deposition of carbon (soot) was studied in the Carbon Deposition Model for Oxygen-Hydrocarbon Combustion Program. An empirical, 1-D model for predicting soot formation and deposition in LO2/hydrocarbon gas generators/preburners was derived. The experimental data required to anchor the model were identified and a test program to obtain the data was defined. In support of the model development, cold flow mixing experiments using a high injection density injector were performed. The purpose of this investigation was to advance the state-of-the-art in LO2/hydrocarbon gas generator design by developing a reliable engineering model of gas generator operation. The model was formulated to account for the influences of fluid dynamics, chemical kinetics, and gas generator hardware design on soot formation and deposition.

Makel, Darby B.↗
NASA NTRS1988

Computer code for the prediction of nozzle admittance

A procedure which can accurately characterize injector designs for large thrust (0.5 to 1.5 million pounds), high pressure (500 to 3000 psia) LOX/hydrocarbon engines is currently under development. In this procedure, a rectangular cross-sectional combustion chamber is to be used to simulate the lower traverse frequency modes of the large scale chamber. The chamber will be sized so that the first width mode of the rectangular chamber corresponds to the first tangential mode of the full-scale chamber. Test data to be obtained from the rectangular chamber will be used to assess the full scale engine stability. This requires the development of combustion stability models for rectangular chambers. As part of the combustion stability model development, a computer code, NOAD based on existing theory was developed to calculate the nozzle admittances for both rectangular and axisymmetric nozzles. This code is detailed.

Nguyen, Thong V.↗
NASA NTRS1992

Development of models for thermal infrared radiation above and within plant canopies

Any significant angular dependence of the emitted longwave radiation could result in errors in remotely estimated energy budgets or evapotranspiration. Empirical data and thermal infrared radiation models are reviewed in reference to anisotropic emissions from the plant canopy. The biometeorological aspects of linking longwave models with plant canopy energy budgets and micrometeorology are discussed. A new soil plant atmosphere model applied to anisotropic longwave emissions from a canopy is presented. Time variation of thermal infrared emission measurements is discussed.

Paw u, Kyaw T.↗
NASA NTRS1988

Probabilistic system identification in the time domain

The objective of system identification is to determine reliable dynamical models of a structure by systematically using its measured excitation and response. It brings together in an integrated fashion, experimental, analytical, and computational techniques in structural dynamics. Areas of application for system identification include the following: (1) Model Evaluation--assessing assumptions (linearity and equivalent viscous damping) and techniques (finite-element modeling) used to construct theoretical models of a structure; (2) Model Improvement--updating of a theoretical model to enable more accurate response predictions for possible future loads on the structure, or for control of the structure; (3) Empirical Modelling--developing empirical relationships (nonlinear models) or empirical parameter values (modal damping) because the present state of the art does not provide theoretical results; and (4) Damage Detection and Assessment--continual or episodic updating of a structural model through vibration monitoring to detect and locate any structural damage. It can be argued that since the construction or modification of models using test data is subject to inherent uncertainties, the above problems should be properly treated within a Bayesian probabilistic framework. Such a methodology is presented which allows the precision of the estimates of the model parameters to be computed. It also leads to a guiding principle in applications. Namely, when selecting a single model from a given class of models, one should take the most probable model in the class based on the experimental data. Practical applications of this principle are given which are based on the utilization of measured seismic motions in large civil structures. Examples include the application of a computer program MODE-ID to identify modal properties directly from seismic excitation and response time histories from a nine-story steel-frame building at JPL and from a freeway overpass bridge.

Beck, James L.↗
NASA NTRS1993

Investigation of high-speed free shear flows using improved pressure-strain correlated Reynolds stress turbulence model

A high-speed shear layer is studied using compressibility corrected Reynolds stress turbulence model which employs newly developed model for pressure-strain correlation. MacCormack explicit prediction-corrector method is used for solving the governing equations and the turbulence transport equations. The stiffness arising due to source terms in the turbulence equations is handled by a semi-implicit numerical technique. Results obtained using the new model show a sharper reduction in growth rate with increasing convective Mach number. Some improvements were also noted in the prediction of the normalized streamwise stress and Reynolds shear stress. The computed results are in good agreement with the experimental data.

Tiwari, S. N.↗
NASA NTRS1993

Developing interpretable models with optimized set reduction for identifying high risk software components

Applying equal testing and verification effort to all parts of a software system is not very efficient, especially when resources are limited and scheduling is tight. Therefore, one needs to be able to differentiate low/high fault frequency components so that testing/verification effort can be concentrated where needed. Such a strategy is expected to detect more faults and thus improve the resulting reliability of the overall system. This paper presents the Optimized Set Reduction approach for constructing such models, intended to fulfill specific software engineering needs. Our approach to classification is to measure the software system and build multivariate stochastic models for predicting high risk system components. We present experimental results obtained by classifying Ada components into two classes: is or is not likely to generate faults during system and acceptance test. Also, we evaluate the accuracy of the model and the insights it provides into the error making process.

Briand, Lionel C.↗
NASA NTRS1995

Planetary and Primitive Object Strength Measurement and Sampling Apparatus

Support is requested for continuation of a program of dynamic impact (harpoon) coring of planetary, comet, or asteroid surface materials. We have previously demonstrated that good quality cores are obtainable for planetary materials with compressive strengths less than 200 MPa. Since the dynamics of penetration are observable on a Discovery class spacecraft, which images the sampling operation, these data can be used with a model developed under this project, to measure in-situ strength and frictional strength of the crust of the object. During the last year we have developed a detailed analytic model of penetrator mechanics. Progress is reported for the solid penetrators experiments, the CIT penetrator model, and the impact spall sampling apparatus.

Ahrens, Thomas J.↗
NASA NTRS1996

Current Results and Proposed Activities in Microgravity Fluid Dynamics

The Institute for Problems in Mechanics' Laboratory work in mathematical and physical modelling of fluid mechanics develops models, methods, and software for analysis of fluid flow, instability analysis, direct numerical modelling and semi-empirical models of turbulence, as well as experimental research and verification of these models and their applications in technological fluid dynamics, microgravity fluid mechanics, geophysics, and a number of engineering problems. This paper presents an overview of the results in microgravity fluid dynamics research during the last two years. Nonlinear problems of weakly compressible and compressible fluid flows are discussed.

Polezhaev, V. I.↗
NASA NTRS1997

A General Reversible Hereditary Constitutive Model: Theoretical Developments - Part 1

Using an internal-variable formalism as a starting point, we describe the viscoelastic extension of a previously-developed viscoplasticity formulation of the complete potential structure type. It is mainly motivated by experimental evidence for the presence of rate/time effects in the so-called quasilinear, reversible, material response range. Several possible generalizations are described, in the general format of hereditary-integral representations for non-equilibrium, stress-type, state variables, both for isotropic as well as anisotropic materials. In particular, thorough discussions are given on the important issues of thermodynamic admissibility requirements for such general descriptions, resulting in a set of explicit mathematical constraints on the associated kernel (relaxation and creep compliance) functions. In addition, a number of explicit, integrated forms are derived, under stress and strain control to facilitate the parametric and qualitative response characteristic studies reported here, as well as to help identify critical factors in the actual experimental characterizations from test data that will be reported in Part II.

Saleeb, A. F.↗
NASA NTRS2000

A Radiative Transfer Model for Climate Calculations

This paper describes a radiative transfer model developed to accurately predict the atmospheric radiant flux in both the infrared and the solar spectrum with a minimum of computational effort. We use a newly developed k-distribution model for both the thermal and solar parts of the spectrum. We employ a generalized two-stream approximation for the scattering by aerosol and clouds. To assess the accuracy of the model, the results are compared to other more detailed models for several standard cases in the solar and thermal spectrum. We perform several calculations focussing primarily on the question of absorption of solar radiation by gases and aerosols. We estimate the accuracy of the k-distribution to be approx. 1 W/sq m for the gaseous absorption in the solar spectrum. We estimate the accuracy of the two-stream method to be 3-12 W/sq m for the downward solar flux and 1-5 W/sq m for the upward solar flux at the top of atmosphere depending on the optical depth of the aerosol layer. We also show that the effect of ignoring aerosol absorption on the downward solar flux at the surface is 50 W/sq m for the TARFOX aerosol for an optical depth of 0.5 and 150 W/sq m for a highly absorbing mineral aerosol. Thus, we conclude that the uncertainty introduced by the aerosol solar radiative properties (and merely assuming some "representative" model) can be considerably larger than the error introduced by the use of a two-stream method.

Bergstrom, Robert W.↗
NASA NTRS2001

Developing Uncertainty Models for Robust Flutter Analysis Using Ground Vibration Test Data

A ground vibration test can be used to obtain information about structural dynamics that is important for flutter analysis. Traditionally, this information#such as natural frequencies of modes#is used to update analytical models used to predict flutter speeds. The ground vibration test can also be used to obtain uncertainty models, such as natural frequencies and their associated variations, that can update analytical models for the purpose of predicting robust flutter speeds. Analyzing test data using the -norm, rather than the traditional 2-norm, is shown to lead to a minimum-size uncertainty description and, consequently, a least-conservative robust flutter speed. This approach is demonstrated using ground vibration test data for the Aerostructures Test Wing. Different norms are used to formulate uncertainty models and their associated robust flutter speeds to evaluate which norm is least conservative.

Potter, Starr↗