Search NASA⌕ Search

SEARCH · Search NASA

Results for “process simulation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Learning About Ares I from Monte Carlo Simulation

This paper addresses Monte Carlo simulation analyses that are being conducted to understand the behavior of the Ares I launch vehicle, and to assist with its design. After describing the simulation and modeling of Ares I, the paper addresses the process used to determine what simulations are necessary, and the parameters that are varied in order to understand how the Ares I vehicle will behave in flight. Outputs of these simulations furnish a significant group of design customers with data needed for the development of Ares I and of the Orion spacecraft that will ride atop Ares I. After listing the customers, examples of many of the outputs are described. Products discussed in this paper include those that support structural loads analysis, aerothermal analysis, flight control design, failure/abort analysis, determination of flight performance reserve, examination of orbit insertion accuracy, determination of the Upper Stage impact footprint, analysis of stage separation, analysis of launch probability, analysis of first stage recovery, thrust vector control and reaction control system design, liftoff drift analysis, communications analysis, umbilical release, acoustics, and design of jettison systems.

Hanson, John M.↗
DOE OSTI2021

Assessment of Turbulent Combustion Models for Simulating Prechamber Ignition in a Natural Gas Engine

Lean combustion is a promising strategy to increase thermal efficiency in an internal combustion engine, by exploiting a favorable specific heat ratio of the fresh mixture while simultaneously suppressing the heat losses to the cylinder wall. However, unstable ignition and slow flame propagation at fuel-lean conditions lead to large cycle-to-cycle variability and limit the high-efficiency engine operating range. Prechamber ignition is considered an effective concept to extend the lean operating limit, by providing spatially distributed ignition with multiple turbulent flame-jets and enabling a faster combustion rate compared to the conventional spark ignition approach. From a numerical modeling standpoint to date science base and available simulation tools are inadequate to properly understand and predict the combustion processes in prechamber ignited engines. In this paper, conceptually different Reynolds-averaged Navier–Stokes (RANS) combustion models widely adopted in the engine modeling community are used to simulate the ignition and combustion processes in a medium-duty natural gas engine with a prechamber spark-ignition system. Here, a flamelet-based turbulent combustion model, i.e., G-equation, and a multizone well-stirred reactor model are employed for this modeling study. Simulation results are compared with experimental data in terms of in-cylinder pressure and heat release rate. Finally, the analysis of the performance of the two models is carried out to highlight the strengths and limitations of the two evaluated approaches.

42 ENGINEERING↗
NASA NTRS1992

Monte Carlo modeling of atomic oxygen attack of polymers with protective coatings on LDEF

Characterization of the behavior of atomic oxygen interaction with materials on the Long Duration Exposure Facility (LDEF) will assist in understanding the mechanisms involved, and will lead to improved reliability in predicting in-space durability of materials based on ground laboratory testing. A computational simulation of atomic oxygen interaction with protected polymers was developed using Monte Carlo techniques. Through the use of assumed mechanistic behavior of atomic oxygen and results of both ground laboratory and LDEF data, a predictive Monte Carlo model was developed which simulates the oxidation processes that occur on polymers with applied protective coatings that have defects. The use of high atomic oxygen fluence-directed ram LDEF results has enabled mechanistic implications to be made by adjusting Monte Carlo modeling assumptions to match observed results based on scanning electron microscopy. Modeling assumptions, implications, and predictions are presented, along with comparison of observed ground laboratory and LDEF results.

Banks, Bruce A.↗
NASA NTRS2016

Modeling Ullage Dynamics of Tank Pressure Control Experiment during Jet Mixing in Microgravity

A CFD model for simulating the fluid dynamics of the jet induced mixing process is utilized in this paper to model the pressure control portion of the Tank Pressure Control Experiment (TPCE) in microgravity1. The Volume of Fluid (VOF) method is used for modeling the dynamics of the interface during mixing. The simulations were performed at a range of jet Weber numbers from non-penetrating to fully penetrating. Two different initial ullage positions were considered. The computational results for the jet-ullage interaction are compared with still images from the video of the experiment. A qualitative comparison shows that the CFD model was able to capture the main features of the interfacial dynamics, as well as the jet penetration of the ullage.

active control↗
NASA NTRS2016

Evaluating Multispectral Snowpack Reflectivity With Changing Snow Correlation Lengths

This study investigates the sensitivity of multispectral reflectivity to changing snow correlation lengths. Matzler's ice-lamellae radiative transfer model was implemented and tested to evaluate the reflectivity of snow correlation lengths at multiple frequencies from the ultraviolet (UV) to the microwave bands. The model reveals that, in the UV to infrared (IR) frequency range, the reflectivity and correlation length are inversely related, whereas reflectivity increases with snow correlation length in the microwave frequency range. The model further shows that the reflectivity behavior can be mainly attributed to scattering rather than absorption for shallow snowpacks. The largest scattering coefficients and reflectivity occur at very small correlation lengths (approximately 10(exp -5 m) for frequencies higher than the IR band. In the microwave range, the largest scattering coefficients are found at millimeter wavelengths. For validation purposes, the ice-lamella model is coupled with a multilayer snow physics model to characterize the reflectivity response of realistic snow hydrological processes. The evolution of the coupled model simulated reflectivities in both the visible and the microwave bands is consistent with satellite-based reflectivity observations in the same frequencies. The model results are also compared with colocated in situ snow correlation length measurements (Cold Land Processes Field Experiment 2002-2003). The analysis and evaluation of model results indicate that the coupled multifrequency radiative transfer and snow hydrology modeling system can be used as a forward operator in a data-assimilation framework to predict the status of snow physical properties, including snow correlation length.

Kang, Do Hyuk↗
DOE OSTI2020

Optimal pumping schedule with high-viscosity gel for uniform distribution of proppant in unconventional reservoirs

Hydrocarbon recovery from a hydraulic-fractured unconventional reservoir can be enhanced by replacing slickwater with non-Newtonian high-viscosity gel as a fracturing fluid. However, in the literature, the role of gel rheology on hydrocarbon production from a fractured reservoir is not very well understood. This lack of understanding makes it difficult for the industry to choose appropriate viscosity parameters of fracturing gels. Motivated by these limitations, first, we have developed a high-fidelity model of non-Newtonian fluid flow to simulate fracture propagation, fluid leak-off, and gel flowback processes to predict the oil production from a hydraulic fractured reservoir. Simulation results of the high-fidelity model show how fracture geometry, formation damage, and gel cleanup process varies with the fracturing fluid rheology. Therefore, the developed model is used to understand the effect of gel rheology on hydrocarbon production via a sensitivity analysis, which provides a set of rheological parameters that maximize the cumulative amount of oil production. Finally, utilizing this optimal high-viscosity gel, a model predictive controller is designed to obtain an optimal pumping schedule necessary for producing a target fracture geometry and proppant concentration. The closed-loop simulation results demonstrate that the obtained pumping schedule successfully achieved the desired fracture geometry and proppant concentration at the end of pumping, leading to the maximum oil production from an unconventional reservoir.

13 HYDRO ENERGY↗
DOE OSTI2022

Study of effect of PWR cold leg temperature gradient on reactor core condition

Effects of temperature and flow gradients in Westinghouse designed three-loop Pressurized Water Reactor (PWR) cold legs, the piping between the main coolant pump and the reactor vessel, were evaluated using Computational Fluid Dynamics (CFD) code STAR CCM+ and coupled neutronic and thermal-hydraulic (T/H) code system VERA. In the parametric study, several symmetric and asymmetric temperature gradients that were significantly larger than those observed from plant measurements were applied to the cold leg inlets for comparison with the base case without any temperature gradient. A CFD model using the STAR-CCM+ code was developed for a portion of the RCS region between the Reactor Coolant Pump (RCP) and the core inlet based on previously validated modeling approach. The CFD simulation results were processed for the temperature and flow rate distributions at the core inlet as input to the VERA calculations. The VERA code system consists of COBRA-TF (CTF) for thermal-hydraulics, MPACT for reactor physics and neutron transport, and ORIGEN for isotopic depletion. The VERA model was for depletion calculations of a high-burnup loading pattern with the reactor core in pin-by-pin and subchannel resolution. The results of the study indicate that the postulated temperature gradients within the PWR cold legs do not result in any significant changes in the core inlet temperature distributions and the core power distributions during the reactor operation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2022

Are Soybean Models Ready for Climate Change Food Impact Assessments?

An accurate estimation of crop yield under climate change scenarios is essential to quantify our ability to feed a growing population and develop agronomic adaptations to meet future food demand. A coordinated evaluation of yield simulations from process-based eco-physiological models for climate change impact assessment is still missing for soybean, the most widely grown grain legume and the main source of protein in our food chain. In this first soybean multi-model study, we used ten prominent models capable of simulating soybean yield under varying temperature and atmospheric CO 2 concentration [CO 2 ] to quantify the uncertainty in soybean yield simulations in response to these factors. Models were first parametrized with high quality measured data from five contrasting environments. We found considerable variability among models in simulated yield responses to increasing temperature and [CO 2 ]. For example, under a + 3 °C temperature rise in our coolest location in Argentina, some models simulated that yield would reduce as much as 24%, while others simulated yield increases up to 29%. In our warmest location in Brazil, the models simulated a yield reduction ranging from a 38% decrease under + 3 °C temperature rise to no effect on yield. Similarly, when increasing [CO 2 ] from 360 to 540 ppm, the models simulated a yield increase that ranged from 6% to 31%. Model calibration did not reduce variability across models but had an unexpected effect on modifying yield responses to temperature for some of the models. The high uncertainty in model responses indicates the limited applicability of individual models for climate change food projections. However, the ensemble mean of simulations across models was an effective tool to reduce the high uncertainty in soybean yield simulations associated with individual models and their parametrization. Ensemble, ensemble mean yield responses to temperature and [CO 2 ] were similar to those reported from the literature. Our study is the first demonstration of the benefits achieved from using an ensemble of grain legume models for climate change food projections, and highlights that further soybean model development with experiments under elevated [CO 2 ] and temperature is needed to reduce the uncertainty from the individual models.

Agricultural Model Inter-comparison and Improvemen↗
DOE OSTI2022

A Hands-on Course on Intensified Membrane Processes for Sustainable Water Purification

The lack in process intensification (PI) training may be limiting processes to achieve sustainability goals. Furthermore, this project developed a hands-on course on intensified membrane processes to address knowledge gaps in PI. Bench-scale activities introduced concepts of membrane separation, operating engineering-scale modules provided a near-industrial experience, and simulation software allowed modeling and optimization of a process. Student evaluations showed that the combination of modeling, experimental, and peer-instruction work helped them understand the application of theoretical concepts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Physical processes in polar stratospheric ice clouds

A one dimensional model of cloud microphysics was used to simulate the formation and evolution of polar stratospheric ice clouds. Some of the processes which are included in the model are outlined. It is found that the clouds must undergo preferential nucleation upon the existing aerosols just as do tropospheric cirrus clouds. Therefore, there is an energy barrier between stratospheric nitric acid particles and ice particles implying that nitric acid does not form a continuous set of solutions between the trihydrate and ice. The Kelvin barrier is not significant in controlling the rate of formation of ice particles. It was found that the cloud properties are sensitive to the rate at which the air parcels cool. In wave clouds, with cooling rates of hundreds of degrees per day, most of the existing aerosols nucleate and become ice particles. Such clouds have particles with sizes on the order of a few microns, optical depths on order of unity and are probably not efficient at removing materials from the stratosphere. In clouds which form with cooling rates of a few degrees per day or less, only a small fraction of the aerosols become cloud particles. In such clouds the particle radius is larger than 10 microns, the optical depths are low and water vapor is efficiently removed. Seasonal simulations show that the lowest water vapor mixing ratio is determined by the lowest temperature reached, and that the time when clouds disappear is controlled by the time when temperatures begin to rise above the minimum values.

Toon, Owen B.↗
DOE OSTI2026

High-Resolution Regional Atmosphere–Ocean–Wave Coupled Simulations of Hurricane Henri (2021)

To explore the integrated effects of ocean and ocean surface wave related physical processes on tropical cyclone simulations, a set of three model simulations is performed. * In experiment 'A', the event is modeled using the Weather Research Forecasting (WRF) model alone with prescribed Sea Surface Temperature (SST) at 6-hour intervals. * In experiment ‘AO,’ WRF is coupled with the Finite Volume Community Ocean Model (FVCOM), enabling variable exchange between atmosphere and ocean, but without considering ocean surface wave-related physical processes. * In experiment ‘AOW’, WRF, FVCOM, and Simulating WAves Nearshore (SWAN) exchange variables with each other every hour through the OASIS3-MCT Coupler to allow direct and indirect atmosphere-ocean-wave interactions. * Observational data are also included in this dataset (Dropsonde, HRD-Radar, NDBC_wave). All simulations are initialized at 18:00 UTC on August 19, 2021, within a domain encompassing the western North Atlantic Ocean. The atmospheric domain features a horizontal resolution of 3 km. The ocean domain, which covers a substantial portion of the WRF ocean domain, employs an unstructured triangular grid with resolutions ranging from 3 km near the coast to 9 km in the open ocean, effectively resolving the complex coastline of the U.S. Northeast Coast. Initial and boundary conditions for the atmosphere model are obtained from the 6-hourly 0.25° NCEP (National Centers for Environmental Prediction) Global Forecast System (GFS; NCEP, 2015) data. These CSV files are derived from the NetCDF files in the c0 dataset. Unlike the original format, where geographic coordinates were stored in a separate file, each CSV now embeds the corresponding latitude and longitude values alongside the measured or simulated variables.

17 WIND ENERGY↗
NASA NTRS1984

Chip level modeling of LSI devices

The advent of Very Large Scale Integration (VLSI) technology has rendered the gate level model impractical for many simulation activities critical to the design automation process. As an alternative, an approach to the modeling of VLSI devices at the chip level is described, including the specification of modeling language constructs important to the modeling process. A model structure is presented in which models of the LSI devices are constructed as single entities. The modeling structure is two layered. The functional layer in this structure is used to model the input/output response of the LSI chip. A second layer, the fault mapping layer, is added, if fault simulations are required, in order to map the effects of hardware faults onto the functional layer. Modeling examples for each layer are presented. Fault modeling at the chip level is described. Approaches to realistic functional fault selection and defining fault coverage for functional faults are given. Application of the modeling techniques to single chip and bit slice microprocessors is discussed.

Armstrong, J. R.↗
NASA NTRSDate not supplied

Towards Integrated Computational Materials Engineering for Quantifying Performance Impacts of Microstructure and Defect Interactions in Powder Bed Fusion Parts

Powder bed fusion (PBF) additive manufacturing (AM) enables the creation of parts with complexity and functionality levels that were previously impossible with traditional manufacturing methods. By modifying the laser power, hatch spacing, or the numerous other processing parameters, the PBF process supports the production of a wide set of materials and geometries. However, that same process parameter design flexibility causes the process-design space of PBF to be massive and expensive to explore experimentally. Another challenge is quality variation across a build. As a part is being built, geometric variance between locations, such as at a thin-wall section vs. the bulk material, may cause the specified processing parameters to no longer be acceptable for producing defect-free printing. Furthermore, if the processing parameters deviate during the print process, it is difficult to assess if the part will still perform satisfactorily. Integrated Computational Materials Engineering (ICME) provides a way to understand and address these various challenges. This talk will present advancements in process-structure simulations of PBF at NASA Langley Research Center. The ability to simulate grain-scale PBF microstructures using the Physically Based Monte Carlo method will be demonstrated and compared to experimental measurements. Techniques for simulating three-dimensional lack-of-fusion and keyhole porosity defects based on the specific processing conditions and approaches for integrating the two porosity prediction techniques alongside the computational microstructure evolution models will be shown. Finally, the integration of simulated PBF microstructures, embedded process defects, and crystal plasticity finite element models to elucidate the interaction of porosity and microstructure on micromechanical fields will be demonstrated. These integrated techniques demonstrate an example of using ICME to relate processing to performance for PBF AM materials. With continued maturity, it is hoped that such ICME approaches will lead to next-generation computational-materials supported qualification and certification of AM parts.

Additive manufacturing↗
DOE OSTI2019

Realized ecological forecast through an interactive Ecological Platform for Assimilating Data (EcoPAD, v1.0) into models

Abstract. Predicting future changes in ecosystem services is not only highly desirable but is also becoming feasible as several forces (e.g., available big data, developed data assimilation (DA) techniques, and advanced cyber-infrastructure) are converging to transform ecological research into quantitative forecasting. To realize ecological forecasting, we have developed an Ecological Platform for Assimilating Data (EcoPAD, v1.0) into models. EcoPAD (v1.0) is a web-based software system that automates data transfer and processing from sensor networks to ecological forecasting through data management, model simulation, data assimilation, forecasting, and visualization. It facilitates interactive data–model integration from which the model is recursively improved through updated data while data are systematically refined under the guidance of model. EcoPAD (v1.0) relies on data from observations, process-oriented models, DA techniques, and the web-based workflow. We applied EcoPAD (v1.0) to the Spruce and Peatland Responses Under Climatic and Environmental change (SPRUCE) experiment in northern Minnesota. The EcoPAD-SPRUCE realizes fully automated data transfer, feeds meteorological data to drive model simulations, assimilates both manually measured and automated sensor data into the Terrestrial ECOsystem (TECO) model, and recursively forecasts the responses of various biophysical and biogeochemical processes to five temperature and two CO 2 treatments in near-real time (weekly). Forecasting with EcoPAD-SPRUCE has revealed that mismatches in forecasting carbon pool dynamics are more related to model (e.g., model structure, parameter, and initial value) than forcing variables, opposite to forecasting flux variables. EcoPAD-SPRUCE quantified acclimations of methane production in response to warming treatments through shifted posterior distributions of the CH 4 :CO 2 ratio and the temperature sensitivity ( Q 10 ) of methane production towards lower values. Different case studies indicated that realistic forecasting of carbon dynamics relies on appropriate model structure, correct parameterization, and accurate external forcing. Moreover, EcoPAD-SPRUCE stimulated active feedbacks between experimenters and modelers to identify model components to be improved and additional measurements to be taken. It has become an interactive model–experiment (ModEx) system and opens a novel avenue for interactive dialogue between modelers and experimenters. Altogether, EcoPAD (v1.0) acts to integrate multiple sources of information and knowledge to best inform ecological forecasting.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Simulation of Deployable Composite Structures Based On Mechanics of Structure Genome

In this paper, a simulation method for analyzing deployable composite structures is presented. With a proper material model, effective plate/shell properties of the composites is obtained based on Mechanics of Structure Genome (MSG), and then implemented into a user subroutine UGENS for global structure simulation in ABAQUS. Column bending test (CBT) and composite boom and hub structure are studied for demonstration. A viscoelastic material model with direct integration implementation is adopted in this paper. CBT simulation shows good agreement with experiments during relaxation, while errors are observed when comparing residual deformation. This simulation can be potentially used as a calibration tool for material properties. After CBT simulation, a demonstrative model with a lenticular boom and the hub is created in ABAQUS. Complete process of flattening, coiling, stowage, deploying and recovery is simulated with the viscoelastic material model. Residual deformation of the boom is analyzed.

Multi-scale modeling↗
NASA NTRS2006

NASA's M and S Accreditation Process Plan and Specification for Space Exploration

NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model's fidelity, credibility, and quality. This information will allow the decision-maker to understand the risks involved in using a model's results in the decision-making process. This presentation will discuss NASA's overall approach to achieving formal accreditation of its models or simulations supporting space exploration. The development of a formal Accreditation Plan is a key component in the preliminary activities for modeling and simulation (M&S) assessment. This presentation will describe NASA's process for identifying risks associated with M&S use and the associated M&S assessments that will dictate the level of data certification and M&S verification and validation (V&V) activities required to support the decision-making process. The M&S Accreditation Plan and Report templates for ESMD will also be illustrated.

O'Neil, David↗
DOE OSTI2025

On-lattice kinetic Monte Carlo approaches for modeling molecular anisotropy in resveratrol crystallization

Stilbenes are a class of organic compounds with broad-ranging pharmaceutical and agricultural applications, which are typically isolated and purified through recrystallization. We are motivated by reducing experimental waste and optimizing yield via developing predictive simulations for processing-dependent crystal morphologies. Using resveratrol as a model stilbene system, we have developed an approach for simulating crystallization with molecular resolution using on-lattice kinetic Monte Carlo. In this work, we highlight modifications to the Stochastic Parallel PARticle Kinetic Simulator (SPPARKS) software package, which were essential to this application. Key enhancements include the incorporation of non-orthogonal cell shapes and monomer anisotropy approximations using bound hard spheres. This new SPPARKS application has been applied to resveratrol with attachment energy libraries obtained from density functional theory, resulting in excellent agreement with experimental morphology prediction.

crystallization↗
DOE OSTI2024

Expanding the representation of aerosol, cloud, and precipitation processes with graph network-based simulators

We explored a novel framework for simulating the small-scale processes that drive the evolution of aerosol, cloud, and precipitation particles, which are a critical gap in the predictive understanding of weather and climate. Particle-based methods have emerged as an effective tool for modeling aerosol-cloud-precipitation interactions, but existing particle-based models are computationally too expensive to simulate the large domains relevant for the atmosphere or to represent the full suite of relevant processes. The lack of a comprehensive and efficient reference model is a critical bottleneck in our understanding of cloud and precipitation processes and our ability to parameterize these processes for regional- and global-scale simulations. To address this need, we explored an approach to accelerate and expand particle-based models using a new machine learning approach, graph network-based simulators (GNS). Rather than modeling the evolution of the system by numerically integrating continuity equations, the GNS represents dynamics through learned message passing. Our aim was to develop fast and accurate surrogate models for particle-based simulations. We explored applying GNS to simulate cloud droplet transport, growth, and evaporation under turbulent conditions, but we found the GNS over-smoothed the simulations. We then applied the GNS to simulate aerosol dynamics through gas condensation and found the GNS was able to reproduce the benchmark, physics-based simulation with high accuracy.

54 ENVIRONMENTAL SCIENCES↗