Search NASA⌕ Search

SEARCH · Search NASA

Results for “projected gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Power Electronics Thermal Management

This project conducts research to develop new power electronics thermal management technologies to increase power density, enable high WBG temperature operation, and decrease cost. One of the main challenges to achieving high power densities is associated with packaging of high-temperature (up to 250 degrees C) WBG devices near lower-temperature-rated components (e.g., electrical boards and capacitors). Additionally, the high junction temperatures of the WBG devices will result in large temperature gradients through the power module layers, which will present reliability challenges and require higher-temperature substrates and bonding materials.

ADVANCED PROPULSION SYSTEMS↗

Radiopure ZnMoO{sub 4} scintillating bolometers for the LUMINEU double-beta experiment

The results of R&D of radiopure zinc molybdate (ZnMoO{sub 4}) based scintillating bolometers for the LUMINEU (Luminescent Underground Molybdenum Investigation for NEUtrino mass and nature) double-beta decay experiment are presented. A dedicated two-stage molybdenum purification technique (sublimation in vacuum and recrystallization from aqueous solutions) and an advanced directional solidification method (the low-thermal-gradient Czochralski technique) were utilized to produce high optical quality large mass (∼1 kg) ZnMoO{sub 4} crystal boules and first {sup 100}Mo (99.5%) enriched Zn{sup 100}MoO{sub 4} crystal scintillator (mass of ∼0.2 kg). Scintillating bolometers based on ZnMoO{sub 4} (≈ 0.33 kg) and Zn{sup 100}MoO{sub 4} (≈ 0.06 kg) scintillation elements and high purity Ge wafers were tested in the EDELWEISS set-up at the Modane Underground Laboratory (France). Long term low temperature tests demonstrate excellent detectors’ performance and effectiveness of the purification and solidification procedures for the achievement of high radiopurity of the material, in particular with a bulk activity of {sup 228}Th and {sup 226}Ra below 4 µBq/kg. The adopted protocol was used to produce for the first time a large volume Zn{sup 100}MoO{sub 4} crystal scintillator (mass of ∼1.4 kg, {sup 100}Mo enrichment is 99.5%) to search for neutrinoless double-beta decay of {sup 100}Mo in the framework of the LUMINEU project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Induced compression wood formation in Douglas fir (Pseudotsuga menziesii) in microgravity

In the microgravity environment of the Space Shuttle Columbia (Life and Microgravity Mission STS-78), were grown 1-year-old Douglas fir and loblolly pine plants in a NASA plant growth facility. Several plants were harnessed (at 45 degrees ) to establish if compression wood biosynthesis, involving altered cellulose and lignin deposition and cell wall structure would occur under those conditions of induced mechanical stress. Selected plants were harnessed at day 2 in orbit, with stem sections of specific plants harvested and fixed for subsequent microscopic analyses on days 8, 10 and 15. At the end of the total space mission period (17 days), the remaining healthy harnessed plants and their vertical (upright) controls were harvested and fixed on earth. All harnessed (at 45 degrees ) plant specimens, whether grown at 1 g or in microgravity, formed compression wood. Moreover, not only the cambial cells but also the developing tracheid cells underwent significant morphological changes. This indicated that the developing tracheids from the primary cell wall expansion stage to the fully lignified maturation stage are involved in the perception and transduction of the stimuli stipulating the need for alteration of cell wall architecture. It is thus apparent that, even in a microgravity environment, woody plants can make appropriate corrections to compensate for stress gradients introduced by mechanical bending, thereby enabling compression wood to be formed. The evolutionary implications of these findings are discussed in terms of "variability" in cell wall biosynthesis.

manned↗

An Externally Forced Decadal Rainfall Seesaw Pattern Over the Sahel and Southeast Amazon

Abstract By analyzing observations and model simulations, here we show that there exists a significant anticorrelation on interannual to multidecadal time scales between the Sahel and southeast Amazon rainfall during July‐August‐September. This rainfall seesaw, which is strongest on decadal to multidecadal scales, is due to an anomalous meridional gradient of sea surface temperatures across the tropical Atlantic that pushes the Intertropical Convergence Zone and its associated rain belt toward the anomalously warm hemisphere. Large ensemble model simulations suggest that the seesaw pattern is likely caused by decadal changes in anthropogenic and volcanic aerosols, rather than internal climate variability. Our results suggest that the recent decadal to multidecadal climate variations in and around the North Atlantic basin are largely externally forced and that projected large North Atlantic warming could lead to a wetter Sahel but drier Amazon in the future.

58 GEOSCIENCES↗

KSTAR Equilibrium Operating Space and Projected Stabilization at High Normalized Beta

Along with an expanded evaluation of the equilibrium operating space of the Korea Superconducting Tokamak Advanced Research, KSTAR, experimental equilibria of the most recent plasma discharges were reconstructed using the EFIT code. In near-circular plasmas created in 2009, equilibria reached a stored energy of 54 kJ with a maximum plasma current of 0.34 MA. Highly shaped plasmas with near double-null configuration in 2010 achieved H-mode with clear edge localized mode (ELM) activity, and transiently reached a stored energy of up to 257 kJ, elongation of 1.96 and normalized beta of 1.3. The plasma current reached 0.7 MA. Projecting active and passive stabilization of global MHD instabilities for operation above the ideal no-wall beta limit using the designed control hardware was also considered. Kinetic modification of the ideal MHD n = 1 stability criterion was computed by the MISK code on KSTAR theoretical equilibria with a plasma current of 2 MA, internal inductance of 0.7 and normalized beta of 4.0 with simple density, temperature and rotation profiles. The steep edge pressure gradient of this equilibrium resulted in the need for significant plasma toroidal rotation to allow thermal particle kinetic resonances to stabilize the resistive wall mode (RWM). The impact of various materials and electrical connections of the passive stabilizing plates on RWM growth rates was analysed, and copper plates reduced the RWM passive growth rate by a factor of 15 compared with stainless steel plates at a normalized beta of 4.4. Computations of active RWM control using the VALEN code showed that the n = 1 mode can be stabilized at normalized beta near the ideal wall limit via control fields produced by the midplane in-vessel control coils (IVCCs) with as low as 0.83kW control power using ideal control system assumptions. The ELM mitigation potential of the IVCC, examined by evaluating the vacuum island overlap created by resonant magnetic perturbations, was analysed using the TRIP3D code. Using a combination of all IVCCs with dominant n = 2 field and upper/lower coils in an even parity configuration, a Chirikov parameter near unity at normalized poloidal flux 0.83, an empirically determined condition for ELM mitigation in DIII-D, was generated in theoretical high-beta equilibria. Chirikov profile optimization was addressed in terms of coil parity and safety factor profile.

Park, Y S↗

Project Description and Publications List for UAH CMMR

This research combines a state of the art X-ray Transmission Microscope, XTM, with a specially designed x-ray transparent horizontal Bridgman furnace to image (with resolutions up to 3 micrometers) the solidification of metal alloys in real-time. The objective is to obtain real-time dynamic data to provide direct measure of the solute profile in the liquid, phase coalescence and growth in the liquid, and the detailed interface morphology (e,g., dendrites and cells) during solidification. We are also enhancing the XTM data with precise solid-liquid interfacial temperature and the thermal gradient measurement techniques, and working on the application of this technology to the study of the fundamentals of solidification in microgravity. Over the last several years we have successfully imaged in real-time: interfacial-morphologies, phase growth, coalescence, incorporation of phases into the growing interface, and the solute boundary layer in the liquid at the solid-liquid interface. We have also measured true local growth rates and can evaluate segregation structures in the solid. Interfacial undercoolings are being measured either with a special Seebeck furnace or with micro-thermocouple arrays we are developing. These later techniques are presently being incorporated with the XTM furnace. This last year emphasized the investigation of the solute layer in the melt during solidification. Methods were developed to quantify the solute concentrations using x-ray absorption and to compare to predictions from simulations. In addition, work is being completed on a brass-board portable XTM that incorporates a vertical Bridgman furnace.

Kaukler, William F.↗

Reduced-dimension Bayesian optimization for model calibration of transient vapor compression cycles

Development and calibration of first-principles dynamic models of vapor compression cycles (VCCs) is of critical importance for applications that include control design and fault detection and diagnostics. Nevertheless, the inherent complexity of models that are represented by large systems of differential–algebraic equations leads to significant challenges for model calibration processes that utilize classical gradient-based methods. Bayesian optimization (BO) is a sample-efficient and gradient-free approach using a probabilistic surrogate model and optimal search over a feasible parameter space. Despite the benefits of BO in reducing computational costs, challenges remain in dealing with a high-dimensional calibration task resulting from a large set of parameters that have significant impacts on system behavior and need to be calibrated simultaneously. This paper presents a reduced-dimension BO framework for calibrating transient VCCs models where the calibration space is projected to a low-dimensional subspace for accelerating convergence of the solution algorithm and consequently reducing the number of transient simulations. The proposed approach was demonstrated via two case studies associated with different VCC applications where 10 parameters were calibrated in each case using laboratory measurements. The reduced-dimension BO framework only required 1 / 8 th of the iterations associated with a standard BO method that deals with high-dimensional calibration parameters for converged solutions and yielded comparable accuracy. Furthermore, both calibrated models revealed significant accuracy improvements compared to uncalibrated models.

Ma, Jiacheng↗

Architecture-Aware Algorithms for Scalable Performance and Resilience on Heterogeneous Architectures. Final Report

With the coming end of Moore's law, it has become essential to develop new algorithms and techniques that can provide the performance needed by demanding computational science applications, especially those that are part of the DOE science mission. This work was part of a multi-institution, multi-investigator project that explored several approaches to develop algorithms that would be effective at the extreme scales and with the complex processor architectures that are expected at the end of this decade. The work by this group developed new performance models that have already helped guide the development of highly scalable versions of an algebraic multigrid solver, new programming approaches designed to support numerical algorithms on heterogeneous architectures, and a new, more scalable version of conjugate gradient, an important algorithm in the solution of very large linear systems of equations.

97 MATHEMATICS AND COMPUTING↗

A study of the turbulence structures of wall-bounded shear flows

This project extends the study of the structure of wall-bounded flows using the topological properties of eddying motions as developed by Chong et al. (1990), Soria et al. (1992, 1994), and as recently extended by Blackburn et al. (1996) and Chacin et al. (1996). In these works, regions of flow which are focal in nature are identified by being enclosed by an isosurface of a positive small value of the discriminant of the velocity gradient tensor. These regions resemble the attached vortex loops suggested first by Theodorsen (1955). Such loops are incorporated in the attached eddy model versions of Perry & Chong (1982), Perry et al. (1986), and Perry & Marusic (1995), which are extensions of a model first formulated by Townsend (1976). The DNS data of wall bounded flows studied here are from the zero pressure gradient flow of Spalart (1988) and the boundary layer with separation and reattachment of Na & Moin (1996). The flow structures are examined from the viewpoint of the attached eddy hypothesis.

Chong, M. S.↗

CLAES Product Improvement by use of GSFC Data Assimilation System

Recent development in chemistry transport models (CTM) and in data assimilation systems (DAS) indicate impressive predictive capability for the movement of airparcels and the chemistry that goes on within these. This project was aimed at exploring the use of this capability to achieve improved retrieval of geophysical parameters from remote sensing data. The specific goal was to improve retrieval of the CLAES CH4 data obtained during the active north high latitude dynamics event of 18 to 25 February 1992. The model capabilities would be used: (1) rather than climatology to improve on the first guess and the a-priori fields, and (2) to provide horizontal gradients to include in the retrieval forward model. The retrieval would be implemented with the first forward DAS prediction. The results would feed back to the DAS and a second DAS prediction for first guess, a-priori and gradients would feed to the retrieval. The process would repeat to convergence and then proceed to the next day.

Kumer, J. B.↗

Effect of Rain-Adjusted Satellite Sea Surface Salinity on ENSO Predictions from the GMAO S2S Forecast System

ENSO has a significant impact on climate variability throughout the world and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of altimetry and in situ data lead to improved short-term forecasts of the coupled system. However, few studies have focused on improving the near-surface density/mixing through assimilation of satellite sea surface salinity (SSS). For expediency, most projects that do assimilate SSS do so as if these data were observed at the top model layer instead of at the surface. In rainy regions where buoyant water sits as a fresh lens at the surface, this assumption is likely invalid. Therefore, we adjust SSS so that it more accurately represents the salinity at the first model layer. The Rain Impact Model (RIM) uses a simple diffusion model to determine the near surface salinity gradient (i.e., 1 cm to 5 m). Satellite SSS data are modified using this near-surface salinity gradient, so the salinity values are now valid at the first model layer (we call this SSS@5m). We assess the impact of satellite SSS observations for near-surface dynamics within ocean reanalyses and how these impact dynamical ENSO forecasts using the NASA GMAO S2S coupled system. For all reanalysis experiments, all available along-track sea level and in situ observations are assimilated for 2011 to 2020 using the LETKF scheme (Penny et al., 2013). One reanalysis assimilates Aquarius /SMAP SSS as before. An additional reanalysis is performed assimilating the SSS@5m data. Validation statistics are compared for experiments that assimilate SSS (sub-optimally as before) versus the SSS@5m. We also compare results of coupled forecasts that are initialized from these reanalyses in spring. For all but the big La Niña in 2017, all NINO3.4 forecasts were improved by using the RIM. We will show that improved SSS estimates upgrades density and near-surface mixing leading to more accurate coupled air/sea interaction and better forecasts.

ENSO↗

Establishing Launch Readiness of NASA ISS Payload OCO-3

The Orbiting Carbon Observatory – 3 (OCO-3) is a NASA Earth-monitoring payload, designed and built by the Jet Propulsion Laboratory (JPL) to perform space-based observation of variations of global carbon dioxide (CO2) by sampling its emission sources and gradients from the unique vantage point of the International Space Station (ISS). This paper describes the development and results of the end-to-end verification, validation and calibration activities that were performed to meet OCO-3's science measurement, functional and performance requirements prior to launch. The pre-launch activities encompassed a suite of tests and analyses that were performed after payload integration and during launch vehicle integration that helped the OCO-3 project demonstrate its launch and mission readiness in terms of ISS compatibility, ground-based instrument calibrations, flight dynamics and environmental integrity and pointing knowledge and accuracy.

Srivastava, Priyanka↗

The Pliocene Model Intercomparison Project Phase 2: Large-scale Climate Features and Climate Sensitivity

The Pliocene epoch has great potential to improve our understanding of the long-term climatic and environmental consequences of an atmospheric CO2 concentration near ∼400 parts per million by volume. Here we present the large-scale features of Pliocene climate as simulated by a new ensemble of climate models of varying complexity and spatial resolution based on new reconstructions of boundary conditions (the Pliocene Model Intercomparison Project Phase 2; PlioMIP2). As a global annual average, modelled surface air temperatures increase by between 1.7 and 5.2 ∘C relative to the pre-industrial era with a multi-model mean value of 3.2 ∘C. Annual mean total precipitation rates increase by 7 % (range: 2 %–13 %). On average, surface air temperature (SAT) increases by 4.3 ∘C over land and 2.8 ∘C over the oceans. There is a clear pattern of polar amplification with warming polewards of 60∘ N and 60∘ S exceeding the global mean warming by a factor of 2.3. In the Atlantic and Pacific oceans, meridional temperature gradients are reduced, while tropical zonal gradients remain largely unchanged. There is a statistically significant relationship between a model's climate response associated with a doubling in CO2 (equilibrium climate sensitivity; ECS) and its simulated Pliocene surface temperature response. The mean ensemble Earth system response to a doubling of CO2 (including ice sheet feedbacks) is 67 % greater than ECS; this is larger than the increase of 47 % obtained from the PlioMIP1 ensemble. Proxy-derived estimates of Pliocene sea surface temperatures are used to assess model estimates of ECS and give an ECS range of 2.6–4.8 ∘C. This result is in general accord with the ECS range presented by previous Intergovernmental Panel on Climate Change (IPCC) Assessment Reports.

Pliocene Model Intercomparison Project↗

Three-dimensional quadratic modeling and quantitative evaluation of the diaphragm on a volumetric CT scan in patients with chronic obstructive pulmonary disease

Purpose: In patients with chronic obstructive pulmonary disease (COPD), diaphragm function may deteriorate due to reduced muscle fiber length. Quantitative analysis of the morphology of the diaphragm is therefore important. In the authors current study, they propose a diaphragm segmentation method for COPD patients that uses volumetric chest computed tomography (CT) data, and they provide a quantitative analysis of the diaphragmatic dimensions. Methods: Volumetric CT data were obtained from 30 COPD patients and 10 normal control patients using a 16-row multidetector CT scanner (Siemens Sensation 16) with 0.75-mm collimation. Diaphragm segmentation using 3D ray projections on the lower surface of the lungs was performed to identify the draft diaphragmatic lung surface, which was modeled using quadratic 3D surface fitting and robust regression in order to minimize the effects of segmentation error and parameterize diaphragm morphology. This result was visually evaluated by an expert thoracic radiologist. To take into consideration the shape features of the diaphragm, several quantification parameters—including the shape index on the apex (SIA) (which was computed using gradient set to 0), principal curvatures on the apex on the fitted diaphragm surface (CA), the height between the apex and the base plane (H), the diaphragm lengths along the x-, y-, and z-axes (XL, YL, ZL), quadratic-fitted diaphragm lengths on the z-axis (FZL), average curvature (C), and surface area (SA)—were measured using in-house software and compared with the pulmonary function test (PFT) results. Results: The overall accuracy of the combined segmentation method was 97.22% ± 4.44% while the visual accuracy of the models for the segmented diaphragms was 95.28% ± 2.52% (mean ± SD). The quantitative parameters, including SIA, CA, H, XL, YL, ZL, FZL, C, and SA were 0.85 ± 0.05 (mm{sup −1}), 0.01 ± 0.00 (mm{sup −1}), 17.93 ± 10.78 (mm), 129.80 ± 11.66 (mm), 163.19 ± 13.45 (mm), 71.27 ± 17.52 (mm), 61.59 ± 16.98 (mm), 0.01 ± 0.00 (mm{sup −1}), and 34 380.75 ± 6680.06 (mm{sup 2}), respectively. Several parameters were correlated with the PFT parameters. Conclusions: The authors propose an automatic method for quantitatively evaluating the morphological parameters of the diaphragm on volumetric chest CT in COPD patients. By measuring not only the conventional length and surface area but also the shape features of the diaphragm using quadratic 3D surface modeling, the proposed method is especially useful for quantifying diaphragm characteristics. Their method may be useful for assessing morphological diaphragmatic changes in COPD patients.

60 APPLIED LIFE SCIENCES↗

Computation of graph hitting time moments; Chapel code implementation.

The project that developed this is unclassified, with the mandate to produce open source code. This code computes the hitting time moments of a graph using a linear algebra configuration. The goal of this work is to explore the performance capabilities of the Chapel programming language. Toward that end, we generate random adjacency matrices which represent a random graph. The code can also read in an adjacency matrix from a file. The main computation is the Conjugate Gradient method.SAND2020-12651 M. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Barrett, Richard↗

Final Report, DE-FG01-06ER25718 Domain Decomposition and Parallel Computing

The goal of this project is to develop and improve domain decomposition algorithms for a variety of partial differential equations such as those of linear elasticity and electro-magnetics.These iterative methods are designed for massively parallel computing systems and allow the fast solution of the very large systems of algebraic equations that arise in large scale and complicated simulations. A special emphasis is placed on problems arising from Maxwell's equation. The approximate solvers, the preconditioners, are combined with the conjugate gradient method and must always include a solver of a coarse model in order to have a performance which is independent of the number of processors used in the computer simulation. A recent development allows for an adaptive construction of this coarse component of the preconditioner.

97 MATHEMATICS AND COMPUTING↗

Program Verification for Extreme-Scale Applications (Final Scientific/Technical Report)

The project seeks to develop tools and techniques to help software developers verify the correctness and accuracy of their code. The target domain is scientific software of the kind widely used and developed in the Department of Energy research community, with a particular focus on "extreme scale" programs - those that are expected to involve possibly millions of parallel threads of execution. The report covers the University of Delaware contribution to the collaborative project. The project had a number of successful outcomes, especially regarding the development and extension of the CIVL software verification framework. CIVL is a verification tool for C or Fortran programs that use MPI, OpenMP, CUDA, and/or Pthreads for parallelization. CIVL went through vast improvements and extensions, and was successfully applied to a number of challenging codes. It found a subtle bug in the Devito PDE framework. It was able to verify the functional correctness of a conjugate gradient solver using a novel probabilistic technique with vanishingly small chance of error. CIVL was used very successfully in verification competitions, and the CIVL solutions to the competition challenges were presented and published. CIVL was also used successfully by other researchers on a computational chemistry kernel.

97 MATHEMATICS AND COMPUTING↗