Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Electrochemical Characterization of Certain Mg-Based Alloys in Artificial Perspiration Biofluid for Consumer and Industrial Applications

The weight reduction of numerous consumer electronic devices is of increasing importance. In this respect, ultra-light magnesium alloys have attracted more attention to be used as frame materials. Nevertheless, Mg alloys are of intrinsically poor corrosion resistance, especially in chloride ion-containing environments. Human perspiration fluid with a relatively high chloride ions content (~ 0.14 M) comes in contact with a number of consumer products resulting in a variety of undesirable effects such as malfunction and corrosion. Based on that, the present work addresses the corrosion behavior of five AZ-Mg alloys including AZ91D, AZ80E, AZ31, AM60 and AXJ530 in artificial perspiration biofluid at human body temperature of 37 °C. The study is performed using electrochemical impedance spectroscopy and potentiodynamic polarization techniques supported by surface morphological and EDX spectra examinations. The surface layer total resistance value (R{sub T}) estimated from the analysis of obtained impedance data after 12-h exposure period reveals that durability of our tested samples increases in the following sequence: AZ80 > AZ91 > AZ31 > AM60 > AXJ530 > Mg (control). AZ80E alloy at top of this sequence points to its significantly high anti-corrosion performance in artificial perspiration biofluid and thus can be the best Mg materials of choice for many housing consumer electronic products. This outcome is in consistence with the corrosion rate (P{sub i} in mm y{sup −1}) trend as derived from the potentiodynamic polarization data that decreases in the following order: AZ80 (0.25) < AZ91 (0.49) < AZ31 (1.03) < AM60 (1.23) < AXJ530 (5.36) < Mg (5.98). Both FE-SEM images and EDX analyses further confirm these experimentally electrochemical findings.

36 MATERIALS SCIENCE↗

Oxidation Resistance of Ti-Al-Cr-Nb-Based High-Entropy Alloys in Air at 1073 K

The effects of prolonged exposure to air at 1073 K on Al20Cr25Nb20Ti20Zr15 and Al20Cr25Nb19Ti20Zr15Y1 (at.%) high-entropy alloys (HEAs) were investigated in this work. Combined scanning electron microscopy and energy-dispersive x-ray spectroscopy (SEM–EDS) analysis revealed that scales containing all major elements in the systems are formed during the oxidation process. Thermogravimetric analysis carried out under the above-mentioned corrosive conditions indicates an initial parabolic kinetics course in the case of the sample with 1 at.% Y addition. However, after a certain period of time, the correlation between mass gain per unit surface area and time becomes linear. In the other case, oxidation proceeds according to the parabolic rate law for the entire process duration. The addition of 1 at.% Y decreases the parabolic rate constants by 1 order of magnitude, thereby improving the chemical stability of the studied Al-Cr-Nb-Ti-Zr system. This is confirmed by visual evaluation, as well as SEM–EDS cross-sectional analysis. Additionally, x-ray diffraction studies indicate that a multiphase oxide scale is formed on the metallic core of both samples. This means that selective oxidation does not occur and all constituent elements took part in the reaction. Taking all of the above into account, it can be concluded that more research is required to fully understand and improve the corrosion resistance of Ti-Al-Cr-Nb-based HEAs.

36 MATERIALS SCIENCE↗

Wear Resistance and Tribological Features of Ultra-Fine-Grained Al-Mg Alloys Processed by Constrained Groove Pressing-Cross Route

In the present study, the wear behavior of ultra-fine grained (UFG) Al-Mg alloys produced by a severe plastic deformation (SPD) method was assessed and compared against the annealed coarse-grained alloy. To this end, weight loss, wear resistance, friction coefficient, and morphology of the worn surfaces was investigated. Constrained groove pressing-cross route (CGP-CR) process, an SPD technique, was implemented at ambient temperature up to two passes to impose an equivalent plastic strain of about 4.64. Formation of a UFG structure with an average sub-grain size of ~ 350 nm with an enhanced tensile strength of up to ~ 225 MPa and indentation hardness of up to ~ 95 HV were achieved upon two passes of CGP-CR process. The pin-on-disk dry wear sliding testing was conducted up to a distance of 1000 m under normal loads of 5, 7, and 9 N at a constant sliding speed of 0.5 m/s. The trends measured for the evaluation of wear properties/mechanisms are discussed based on the microstructural features and mechanical property of UFGed alloys. The results showed that by employing the CGP-CR process and through the formation of UFG structure, the wear resistance was considerably increased. This was even beyond two times (~ 100%) larger depending on the normal loading with the lowest coefficient of friction around 0.6. Observation and study of the morphology of the worn surfaces under field emission-scanning electron microscopy (FE-SEM) revealed a change in the wear mechanism from sticking followed by formation of plastic deformation bands and delamination in the coarse-grained annealed alloy into a combined abrasive-adhesive behavior in the UFG material.

36 MATERIALS SCIENCE↗

Energy levels and radiative transition rates for Ge XXXI, As XXXII, and Se XXXIII

Fine-structure energies of the 67 levels belonging to the 1s{sup 2}, 1s 2l, 1s3l, 1s4l, 1s5l, and 1s6l configurations of Ge XXXI, As XXXII, and Se XXXIII have been calculated using the General-Purpose Relativistic Atomic Structure Package. In addition, radiative rates, oscillator strengths, transition wavelengths, and line strengths have been calculated for all electric dipole, magnetic dipole, electric quadrupole, and magnetic quadrupole transitions among these levels. Lifetimes are also presented for all excited levels of these three ions. We have compared our results with the results available in the literature and the accuracy of the data is assessed. We predict new energy levels, oscillator strengths, and transition probabilities where no other theoretical or experimental results are available, which will form the basis for future experimental work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Wavelengths, transition probabilities, and oscillator strengths for M-shell transitions in Co-, Ni-, Cu-, Zn-, Ga-, Ge-, and Se-like Au ions

Wavelengths, transition probabilities, and oscillator strengths have been calculated for M-shell electric dipole transitions in Co-, Ni-, Cu-, Zn-, Ga-, Ge-, and Se-like Au ions. The fully relativistic multiconfiguration Dirac–Fock method, taking quantum electrodynamical effects and the Breit correction into account, was used in the calculations. Calculated energy levels of M-shell excited states for Cu-, Zn-, Ga-, Ge-, and Se-like Au ions from the method were compared with available theoretical and experimental results, and good agreement with them was achieved.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear ground-state masses and deformations: FRDM(2012)

We tabulate the atomic mass excesses and binding energies, ground-state shell-plus-pairing corrections, ground-state microscopic corrections, and nuclear ground-state deformations of 9318 nuclei ranging from {sup 16}O to A=339. The calculations are based on the finite-range droplet macroscopic and the folded-Yukawa single-particle microscopic nuclear-structure models, which are completely specified. Relative to our FRDM(1992) mass table in Möller et al. (1995), the results are obtained in the same model, but with considerably improved treatment of deformation and fewer of the approximations that were necessary earlier, due to limitations in computer power. The more accurate execution of the model and the more extensive and more accurate experimental mass data base now available allow us to determine one additional macroscopic-model parameter, the density-symmetry coefficient L, which was not varied in the previous calculation, but set to zero. Because we now realize that the FRDM is inaccurate for some highly deformed shapes occurring in fission, because some effects are derived in terms of perturbations around a sphere, we only adjust its macroscopic parameters to ground-state masses. The values of ten constants are determined directly from an optimization to fit ground-state masses of 2149 nuclei ranging from {sup 16}O to {sub 106}{sup 265}Sg and {sub 108}{sup 264}Hs. The error of the mass model is 0.5595 MeV for the entire region of nuclei included in the adjustment, but is only 0.3549 MeV for the region N≥65. We also provide masses in the FRLDM, which in the more accurate treatments now has an error of 0.6618 MeV, with 0.5181 MeV for nuclei with N≥65, both somewhat larger than in the FRDM. But in contrast to the FRDM, it is suitable for studies of fission and has been extensively so applied elsewhere, with FRLDM(2002) constants. The FRLDM(2012) fits 31 fission-barrier heights from {sup 70}Se to {sup 252}Cf with a root-mean-square deviation of 1.052 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

HTO and selenate diffusion through compacted Na-, Na–Ca-, and Ca-montmorillonite

Radionuclide transport in smectite clay barrier systems used for nuclear waste disposal is controlled by diffusion, with adsorption significantly retarding transport rates. While a relatively minor component of spent nuclear fuel, 79 Se is a major driver of the safety case for spent fuel disposal due to its long half-life (3.3×10 5 yr) and its low adsorption to clay (K D < 10 L/kg), thus a thorough understanding of Se diffusion through clay is critical for understanding the long-term safety of spent fuel disposal systems. Through-diffusion experiments with tritiated water (HTO, conservative tracer) and Se(VI) were conducted with a well-characterized, purified montmorillonite source clay (SWy-2) under a constant ionic strength (0.1 M) and three different electrolyte compositions: Na + , Ca 2+ , and a Na + -Ca 2+ mixture at pH 6.5 in order to probe the effects of electrolyte composition and interlayer cation composition on clay microstructure, Se(VI) aqueous speciation, and ultimately diffusion. Further, the results were modeled using a reactive transport modeling approach to determine values of porosity (ε), D e (effective diffusion coefficient), and K D (distribution coefficient for adsorption). HTO diffusive flux was higher in Ca-montmorillonite (D e =1.68×10 -10 m 2 s -1 ) compared to Na-montmorillonite (De=7.83×10 -11 m 2 s -1 ). This increase in flux is likely due to a greater degree of clay layer stacking in the presence of Ca 2+ compared to Na + , which leads to larger inter-particle pores. Overall, the Se(VI) flux was much lower than the HTO flux due to anion exclusion, with Se(VI) flux following the order Ca (D e = 1.03×10 -11 m 2 s -1 ) > Na–Ca (D e = 2.12×10 -12 m 2 s -1 ) > Na (D e = 1.28×10 -12 m 2 s -1 ). These differences in Se(VI) flux are due to a combination of factors, including (1) larger accessible porosity in Ca-montmorillonite due to clay layer stacking and smaller electrostatic effects compared to Na-montmorillonite, (2) larger accessible porosity for neutral-charge CaSeO4 species which makes up 32% of aqueous Se(VI) in the pure Ca system, and (3) possibly higher Se(VI) adsorption for Ca-montmorillonite. Through a combination of experimental and modeling work, this study highlights the compounding effects that electrolyte and counterion compositions can have on radionuclide transport through clay. Diffusion models that neglect these effects are not transferable from laboratory experimental conditions to in situ repository conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modulations of benzo[a]pyrene-induced DNA adduct, cyclin D1 and PCNA in oral tissue by 1,4-phenylenebis(methylene)selenocyanate

Tobacco smoking is an important cause of human oral squamous cell carcinoma (SCC). Tobacco smoke contains multiple carcinogens include polycyclic aromatic hydrocarbons typified by benzo[a]pyrene (B[a]P). Surgery is the conventional treatment approach for SCC, but it remains imperfect. However, chemoprevention is a plausible strategy and we had previously demonstrated that 1,4-phenylenebis(methylene)selenocyanate (p-XSC) significantly inhibited tongue tumors-induced by the synthetic 4-nitroquinoline-N-oxide (not present in tobacco smoke). In this study, we demonstrated that p-XSC is capable of inhibiting B[a]P-DNA adduct formation, cell proliferation, cyclin D1 expression in human oral cells in vitro. In addition, we showed that dietary p-XSC inhibits B[a]P-DNA adduct formation, cell proliferation and cyclin D1 protein expression in the mouse tongue in vivo. The results of this study are encouraging to further evaluate the chemopreventive efficacy of p-XSC initially against B[a]P-induced tongue tumors in mice and ultimately in the clinic.

60 APPLIED LIFE SCIENCES↗

Human selenophosphate synthetase 1 has five splice variants with unique interactions, subcellular localizations and expression patterns

Selenophosphate synthetase 1 (SPS1) is an essential cellular gene in higher eukaryotes. Five alternative splice variants of human SPS1 (major type, {Delta}E2, {Delta}E8, +E9, +E9a) were identified wherein +E9 and +E9a make the same protein. The major type was localized in both the nuclear and plasma membranes, and the others in the cytoplasm. All variants form homodimers, and in addition, the major type forms a heterodimer with {Delta}E2, and {Delta}E8 with +E9. The level of expression of each splice variant was different in various cell lines. The expression of each alternative splice variant was regulated during the cell cycle. The levels of the major type and {Delta}E8 were gradually increased until G2/M phase and then gradually decreased. {Delta}E2 expression peaked at mid-S phase and then gradually decreased. However, +E9/+E9a expression decreased gradually after cell cycle arrest. The possible involvement of SPS1 splice variants in cell cycle regulation is discussed.

60 APPLIED LIFE SCIENCES↗

A renewed search for short-lived 126 Sn in the early Solar System: Hydride generation MC-ICPMS for high sensitivity Te isotopic analysis

Although there is limited direct evidence for supernova input into the nascent Solar System many models suggest it formed by the gravitational collapse of a molecular cloud that was triggered by a nearby supernova. Existing lines of evidence mostly in the form of short lived radionuclidespresent in the early Solar System are potentially consistent with this hypothesis but still allow for alternative explanations. Since the natural production of Sn-126 is thought to occur only in supernovae and this isotope has a short half-life (Sn-126 -> Te-126 t(1/2) = 235 ky) the discovery of extant Sn-126 would provide unequivocal proof of supernova input to the early Solar System. Previous attempts to quantify the initial abundance of Sn-126 by examining Sn-Te systematics in early solids have been hampered by difficulties in precisely measuring Te isotope ratios in these materials. Thus here we describe a novel technique that uses hydride generation to dramatically increase the ionization efficiency of Te-an approximately 30-fold increase over previous work. This introduction system when coupled to a MC-ICPMS enables highprecision Te isotopic analyses on samples with < 10 ng of Te. We used this technique to analyze Te from a unique set of calcium-aluminum-rich inclusions (CAIs) that exhibit an exceptionally large range in Sn/Te ratios facilitating the search for the short-lived isotope Sn-126. This sample set shows no evidence of live Sn-126 implying at most minor input of supernova material during the time at which the CAIs formed. However based on the petrology of this sample set combined with the higher than expected concentrations of Sn and Te as well as the lack of nucleosynthetic anomalies in other isotopes of Te suggest that the bulk of the Sn and Te recovered from these particular refractory inclusions is not of primary origin and thus does not represent a primary signature of Sn-Te systematics of the protosolar nebula during condensation of CAIs or their precursors. Although no evidence of supernova input was found based on Sn-Te systematics in this sample set hydride generation represents a powerful tool that can now be used to further explore Te isotope systematics in less altered materials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Structural motifs in heteroleptic copper and cadmium selenites

Cu(II) cations in the presence of diamine ligands such as tetramethylethylendiamine (TMEDA) react with Na2SeO3 to produce the heteroleptic selenite copper compound of formula [Cu-3(TMEDA)(3)(SeO3)(2)(H2O)(4)] (NO3)(2). In the cationic moiety two copper atoms are linked by two selenite anions through the O-Se-O bridge. One of the two bridging selenite anion coordinates to a third copper atom through the third oxygen atom. Reaction of Cd(CH3COO)(2)center dot 2H(2)O with Na2SeO3 in the presence of ligand with softer character such as thiourea [(NH2)(2)CS; tu] or selenourea [(NH2)(2)CSe; tu] in aqueous solution afforded the complex [{Cd(tu)(2)SeO3}(2)], whose structure has been elucidated by X-ray diffraction analysis. It is the first reported example of a molecular cadmium selenite complex. Two cadmium cations stabilized by the coordination of four ancillary thiourea soft ligands, are linked together by two bridging selenite ions through O and O-Se-O bridges. A comparison between the coordination mode of the selenite ion in those cadmium and copper complexes and in inorganic extended CdSeO3 and hydrated CuSeO3 phases is also reported. (C) 2017 Elsevier B.V. All rights reserved.

cadmium↗

Sodium Selenite Radiosensitizes Hormone-Refractory Prostate Cancer Xenograft Tumors but Not Intestinal Crypt Cells In Vivo

Purpose: We have previously shown that sodium selenite (SSE) increases radiation-induced cell killing of human prostate carcinoma cells in vitro. In this study we further evaluated the in vivo radiosensitizing effect of SSE in prostate cancer xenograft tumors and normal radiosensitive intestinal crypt cells. Methods and Materials: Immunodeficient (SCID) mice with hormone-independent LAPC-4 (HI-LAPC-4) and PC-3 xenograft tumors (approximately 200 mm{sup 3}) were divided into four groups: control (untreated), radiation therapy (XRT, local irradiation), SSE (2 mg/kg, intraperitoneally, 3 times/week), and XRT plus SSE. The XRT was given at the beginning of the regimen as a single dose of 5 Gy for HI-LAPC-4 tumors and a single dose of 7 Gy followed by a fractional dose of 3 Gy/d for 5 days for PC-3 tumors. The tumor volume was measured 3 times per week. The radiosensitizing effect of SSE on normal intestinal epithelial cells was assessed by use of a crypt cell microcolony assay. Results: In the efficacy study, SSE alone significantly inhibited the tumor growth in HI-LAPC-4 tumors but not PC-3 tumors. Sodium selenite significantly enhanced the XRT-induced tumor growth inhibition in both HI-LAPC-4 and PC-3 tumors. In the toxicity study, SSE did not affect the intestinal crypt cell survival either alone or in combination with XRT. Conclusions: Sodium selenite significantly enhances the effect of radiation on well-established hormone-independent prostate tumors and does not sensitize the intestinal epithelial cells to radiation. These results suggest that SSE may increase the therapeutic index of XRT for the treatment of prostate cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis, structure, and magnetic and electronic properties of Cs{sub 2}Hg{sub 2}USe{sub 5}

The compound Cs{sub 2}Hg{sub 2}USe{sub 5} was obtained from the solid-state reaction of U, HgSe, Cs{sub 2}Se{sub 3}, Se, and CsI at 1123 K. This material crystallizes in a new structure type in space group P2/n of the monoclinic system with a cell of dimensions a=10.276(6) A, b=4.299(2) A, c=15.432(9) A, beta=101.857(6) A, and V=667.2(6) A{sup 3}. The structure contains {sub i}nfinity{sup 2}[Hg{sub 2}USe{sub 5}] layers separated by Cs atoms. Within the layers are distorted HgSe{sub 4} tetrahedra and regular USe{sub 6} octahedra. In the temperature range of 25-300 K Cs{sub 2}Hg{sub 2}USe{sub 5} displays Curie-Weiss paramagnetism with mu{sub eff}=3.71(2) mu{sub B}. The compound exhibits semiconducting behavior in the [010] direction; the conductivity at 298 K is 3x10{sup -3} S/cm. Formal oxidation states of Cs/Hg/U/Se may be assigned as +1/+2/+4/- 2, respectively. - Graphical abstract: View of the crystal structure of Cs{sub 2}Hg{sub 2}USe{sub 5}.

36 MATERIALS SCIENCE↗

Synthesis and characterization of quaternary chalcogenides InSn{sub 2}Bi{sub 3}Se{sub 8} and In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9}

Quaternary chalcogenides InSn{sub 2}Bi{sub 3}Se{sub 8} and In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9} were synthesized on direct combination of their elements in stoichiometric ratios at T>800 deg. C under vacuum. Their structures were determined with X-ray diffraction of single crystals. InSn{sub 2}Bi{sub 3}Se{sub 8} crystallizes in monoclinic space group C2/m (No. 12) with a=13.557(3) A, b=4.1299(8) A, c=15.252(3) A, beta=115.73(3){sup o}, V=769.3(3) A{sup 3}, Z=2, and R{sub 1}/wR{sub 2}/GOF=0.0206/0.0497/1.092; In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9} crystallizes in orthorhombic space group Cmc2{sub 1} (No. 36) with a=4.1810(8) A, b=13.799(3) A, c=31.953(6) A, V=1843.4(6) A{sup 3}, Z=4, and R{sub 1}/wR{sub 2}/GOF=0.0966/0.2327/1.12. InSn{sub 2}Bi{sub 3}Se{sub 8} and In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9} are isostructural with CuBi{sub 5}S{sub 8} and Bi{sub 2}Pb{sub 6}S{sub 9} phases, respectively. The structures of InSn{sub 2}Bi{sub 3}Se{sub 8} and In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9} feature a three-dimensional framework containing slabs of NaCl-(311) type with varied thicknesses. Calculations of the electronic structure and measurements of electrical conductivity indicate that these materials are semiconductors with narrow band gaps. Both compounds show n-type semiconducting properties with Seebeck coefficients -270 and -230 muV/K at 300 K for InSn{sub 2}Bi{sub 3}Se{sub 8} and In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9}, respectively. - Graphical abstract: Quaternary selenides InSn{sub 2}Bi{sub 3}Se{sub 8} and In{sub 0.2}Sn{sub 6}Bi{sub 1.8}Se{sub 9} feature three-dimensional frameworks containing NaCl-(311) type slabs with varied thicknesses. Measurements of the electrical conductivity indicate that these materials are n-type semiconductors.

36 MATERIALS SCIENCE↗

Strontium-copper selenite-chlorides: Synthesis and structural investigation

Two new complex selenite-chlorides of strontium and copper Sr{sub 2}Cu(SeO{sub 3}){sub 2}Cl{sub 2} (I) and SrCu{sub 2}(SeO{sub 3}){sub 2}Cl{sub 2} (II) were obtained and characterized by X-ray diffraction technique, DTA and IR spectroscopy. Both compounds crystallize in the monoclinic system I: Sp. gr. P2{sub 1}/n, a=5.22996(3) A, b=6.50528(4) A, c=12.34518(7) A, beta=91.3643(2){sup o}, Z=2; II: Sp. gr. P2{sub 1}, a=7.1630(14) A, b=7.2070(14) A, c=8.0430(16) A, beta=95.92(3){sup o}, Z=2. Comparison of the crystal structure of (I) with the structures of Sr{sub 2}M(SeO{sub 3}){sub 2}Cl{sub 2} (M=Co, Ni) was performed. The substitution of strontium atom in the structure of (I) by Cu{sup 2+} ion with a 3d{sup 9} Jahn-Teller distorted surrounding leads to the lowering of the structure symmetry and to the appearance of the noncentrosymmetric structure of (II). The noncentrosymmetric character of the structure of (II) was confirmed by SHG signal (1.2 units relative to an alpha-quartz powder sample). - Graphical abstract: Sr{sub 2}Cu(SeO{sub 3}){sub 2}Cl{sub 2} and SrCu{sub 2}(SeO{sub 3}){sub 2}Cl{sub 2} were obtained and characterized by X-ray diffraction technique, DTA and IR spectroscopy.

36 MATERIALS SCIENCE↗

RbAuUSe{sub 3}, CsAuUSe{sub 3}, RbAuUTe{sub 3}, and CsAuUTe{sub 3}: Syntheses and structure; magnetic properties of RbAuUSe{sub 3}

The compounds RbAuUSe{sub 3}, CsAuUSe{sub 3}, and RbAuUTe{sub 3} were synthesized at 1073 K from the reactions of U, Au, Q, and A{sub 2}Q{sub 3} (A=Rb or Cs; Q=Se or Te). The compound CsAuUTe{sub 3} was synthesized at 1173 K from the reaction of U, Au, Te, and CsCl as a flux. These isostructural compounds crystallize in the KCuZrS{sub 3} structure type in space group Cmcm of the orthorhombic system. The structure consists of {sub i}nfinity{sup 2}[AuUQ{sub 3}{sup -}] layers that contain nearly regular UQ{sub 6} octahedra and distorted AuQ{sub 4} tetrahedra. The infinite layers are separated by bicapped trigonal prismatic A cations. The magnetic behavior of RbAuUSe{sub 3} deviates significantly from Curie-Weiss behavior at low temperatures. For T>200 K, the values of the Curie constant C and the Weiss constant theta{sub p} are 1.82(9) emu K mol{sup -1} and -3.5(2)x10{sup 2} K, respectively. The effective magnetic moment mu{sub eff} is 3.81(9) mu{sub B}. Formal oxidation states of A/Au/U/Q may be assigned as +1/+1/+4/-2, respectively. - Graphical abstract: View down [100] of the crystal structure of the isostructural AAuUQ3 (A=Rb, Cs; Q=Se, Te) compounds.

36 MATERIALS SCIENCE↗

Compositional dependence of the nonlinear refractive index of new germanium-based chalcogenide glasses

In this paper, we report results of n{sub 2} measurements of new chalcogenide glasses in the Ge-Sb-S-Se system using a modified Z-Scan technique. Measurements were made with picosecond pulses emitted by a 10 Hz Q-switched mode-locked Nd-YAG laser at 1064 nm under conditions suitable to characterize ultrafast nonlinearities. The nonlinear index increases up to 500 times the n{sub 2} of fused silica with an increase in the Ge/Se ratio and a decrease with an increase of the Ge/Sb ratio. We confirmed, using Raman spectroscopy, that the nonlinear refractive index depends on the number of Ge-S(Se) and Sb-S(Se) bonds in the glass network. Sulfide glasses were shown to have a nonlinear FOM near or <1, at 1064 nm. - Graphical abstract: In this paper, we report results of n{sub 2} measurements of new chalcogenide glasses in the Ge-Sb-S-Se system using a modified Z-Scan technique. n{sub 2} is found to increase with an increase of normalized photon energy, regardless of chalcogen type, but does not depend on the concentration of lone pair electron.

36 MATERIALS SCIENCE↗

The effects of doping ferromagnetic spinel CdCr{sub 2}Se{sub 4} with Sb{sup 3+} ions

Semiconducting spinel CdCr{sub 2}Se{sub 4} orders ferromagnetically below T{sub C}=130 K. A series of single-crystals of CdCr{sub 2}Se{sub 4} doped with Sb{sup 3+} ions has been synthesized in order to study an effect of the substitution on the cation distribution and the magnetic properties. The compounds of Cd{sub y}Sb{sub x}Cr{sub z}Se{sub 4} have been investigated by means of X-ray diffraction, magnetization measurements and electron spin resonance spectroscopy. Two selected samples of the composition (Cd{sub 1-x}Sb{sub x})[Cr{sub 2}]Se{sub 4} with x=0.13 and 0.44 retained cubic symmetry with space group Fd3-barm. The unit cell parameter appeared to be sensitive to the concentration of Sb{sup 3+} admixture: it increases with x, despite a close similarity in the ionic radii of Cd{sup 2+} and Sb{sup 3+} in tetrahedral coordination. Upon partial substitution of Cd{sup 2+} by Sb{sup 3} no obvious change in the Curie temperature was observed, however, the effective magnetic moment slightly increased, what may result from the appearance of Cr{sup 2+} ions. The characteristic feature of the system studied is an extended range of short-range magnetic order, in which the magnetic properties in the paramagnetic state are governed by the formation of ferromagnetic clusters, as indicated by both the bulk magnetometric and spectroscopic data. - Graphical abstract: Temperature dependent evolution of the ESR spectrum for the (Cd{sub 0.56}Sb{sub 0.44})[Cr{sub 2}]Se{sub 4} single-crystal showing inhomogeneous nature of the ferromagnetic ordered state below T{sub c}=130 K. At temperature 127 K a fraction of the paramagnetic phase can still be observed.

36 MATERIALS SCIENCE↗