Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequence variations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Simultaneous Incorporation of Cr, Zn, Cd, and Pb in the Goethite Structure

In order to improve our understanding of how the goethite crystal structure is affected by the incorporation of metals (and by variations in the amount of the incorporation), and to review any possible synergistic and antagonistic effects of co-metals, the present investigation focused on the incorporation of multiple (di-, tri-, and tetra-) metals, i.e. Cr, Zn, Cd, and Pb, in the goethite crystallographic structure. A series of single- and multi-metal M-Cr/Zn/Cd/Pb-substituted goethites with M/(M+Fe) molar ratios = 0.10 were prepared. The general sequence of metal entry in single-metal substituted goethites was Zn = Cr > Cd > Pb and in multi-metal-substituted goethites was Zn > Cr {ge} Cd > Pb. Simultaneous incorporation of Cr, Zn, Cd, and Pb up to 10.5 mole % was achieved in goethite. Synchrotron X-ray diffraction and extended X-ray absorption fine structure (EXAFS) techniques were employed to assess the structural characteristics of the synthesis products. Rietveld refinement of XRD data showed small changes in unit-cell parameters and Fe/M-Fe/M distances due to M substitution(s). A typical goethite-like crystalline structure remained intact, however. The unit-cell parameters were mutually, linearly correlated, though Fe/M-Fe/M distances were not, indicating that complex changes occurred at the local scale. In single-metal substituted goethites, incorporation of Cr reduced the unit-cell volume by 0.13% while that of Zn, Cd, and Pb increased it by 1.09, 3.58, and 0.56%, respectively. The changes in multi-metal-substituted goethites appeared to be the complex combination of that of the individually incorporated metals. The X-ray absorption near edge structure study of Pb-substituted goethites showed that the majority of associated Pb was Pb{sup 2+}, while Pb{sup 4+} was preferred over Pb{sup 2+} in the bulk structure. Measurements by EXAFS at the Fe K-edge indicated that the Fe polyhedra contracted in the presence of Cd{sup 2+} and Pb{sup 2+}, providing room for the substitution of larger cations. Measurements by EXAFS at the Cr and Cd K-edges indicated symmetric Cr/Cd polyhedra with single Cr/Cd-O distances and, at Fe and Zn K-edges and the Pb LIII-edge, indicated asymmetric polyhedra with two sets of Fe/Zn/Pb-O distances. The Zn octahedra were possibly Zn(OH){sub 4}O{sub 2}, which enlarged the metal-metal corner-sharing distance to 3.86 {angstrom}. This configuration of ligands around the Zn{sup 2+} cation might occur to balance local charges. Symmetric polyhedra appeared to reduce steric strains in the structure, compared to the asymmetric polyhedra. The result was that Cr enhanced the incorporation of Zn, Cd, and Pb, while the converse was true for Zn.

36 MATERIALS SCIENCE↗

Twin studies reveal specific imbalances in the mucosa-associated microbiota of patients with ileal Crohn's disease

Large inter-individual variation in the composition of the intestinal microbiota between unrelated individuals has made it challenging to identify specific aspects of dysbiosis that lead to Crohn's disease. To reduce variations in exposure during establishment of the gut flora and influence of genotype, we studied the mucosaassociated microbiota of monozygotic twin pairs that were discordant (n=6) or concordant (n=4) for Crohn's disease. DNA was extracted from biopsies collected from 5 locations between the ileum and rectum. Bacterial 16S ribosomal RNA genes were amplified and community composition assessed by terminal-restriction fragment length polymorphism, cloning and sequencing and quantitative real-time PCR. The microbial compositions at all biopsy locations for each individual were similar, regardless of disease state, but there were differences between individuals. In particular, individuals with predominantly ileal Crohn's had a dramatically lower abundance (P<0.001) of Faecalibacterium prausnitzii and increased abundance (P<0.03) of Escherichia coli compared to healthy co-twins and those with Crohn's localized in the colon. This dysbiosis was significantly correlated to the disease phenotype rather than genotype. The reduced abundance of F. prausnitzii and increased abundance of E. coli are indicative of an ileal Crohn's disease phenotype, distinct from colonic Crohn's disease and the relative abundances of these specific bacterial populations are promising biomarker candidates for differential diagnosis of Crohn's and eventually customized treatment.

54 ENVIRONMENTAL SCIENCES↗

Structural and functional characterization of TRI3 trichothecene 15-O-acetyltransferase from Fusarium sporotrichioides

Fusarium head blight is a devastating disease of cereal crops whose worldwide incidence is increasing and at present there is no satisfactory way of combating this pathogen or its associated toxins. There is a wide variety of trichothecene mycotoxins and they all contain a 12,13-epoxytrichothecene skeleton but differ in their substitutions. Indeed, there is considerable variation in the toxin profile across the numerous Fusarium species that has been ascribed to differences in the presence or absence of biosynthetic enzymes and their relative activity. This article addresses the source of differences in acetylation at the C15 position of the trichothecene molecule. Here, we present the in vitro structural and biochemical characterization of TRI3, a 15-O-trichothecene acetyltransferase isolated from F. sporotrichioides and the 'in vivo' characterization of Deltatri3 mutants of deoxynivalenol (DON) producing F. graminearum strains. A kinetic analysis shows that TRI3 is an efficient enzyme with the native substrate, 15-decalonectrin, but is inactive with either DON or nivalenol. The structure of TRI3 complexed with 15-decalonectrin provides an explanation for this specificity and shows that Tri3 and Tri101 (3-O-trichothecene acetyltransferase) are evolutionarily related. The active site residues are conserved across all sequences for TRI3 orthologs, suggesting that differences in acetylation at C15 are not due to differences in Tri3. The tri3 deletion mutant shows that acetylation at C15 is required for DON biosynthesis even though DON lacks a C15 acetyl group. The enzyme(s) responsible for deacetylation at the 15 position of the trichothecene mycotoxins have not been identified.

60 APPLIED LIFE SCIENCES↗

THE FLUORESCENCE EFFICIENCIES OF THE CN VIOLET BANDS IN COMETS

We have carried out calculations of the fluorescent equilibrium of the CN molecule in the solar radiation field as a function of heliocentric radial velocity and distance. The detailed rotational line intensities of the CN violet 0-0 band have been recalculated for radial velocities between -60 and +60 km s{sup -1} and at 10 distances in steps of {radical}2 from 0.25 to 5.7 AU. Comparisons with observed CN violet 0-0 band profiles yield reasonable agreement and remaining discrepancies are well understood. Based on the derived equilibrium rotational level populations of the ground state, 1-1 band rotational line intensities were also calculated. Total band fluorescence efficiencies for the violet {Delta}{nu} = 0 sequence are tabulated for the above range of distances and velocities, permitting the interpolation to any given comet's observational circumstances. These fluorescence efficiencies, L/N, or 'g-factors', needed to reduce CN emission band fluxes to CN abundances, are also accessible via a Web-based service. The values at any heliocentric distance vary by about a factor of two with varying velocities, but the specific structure of this variation with velocity changes dramatically with distance.

79 ASTRONOMY AND ASTROPHYSICS↗

Factors That Influence Variability in Stress-Drop Measurements Using Spectral Decomposition and Spectral-Ratio Methods for the 2019 Ridgecrest Earthquake Sequence

Stress drop is a fundamental parameter related to earthquake source physics, but is hard to measure accurately. To better understand how different factors influence stress-drop measurements, we compare two different methods using the Ridgecrest stress-drop validation data set: spectral decomposition (SD) and spectral ratio (SR), each with different processing options. Here, we also examine the influence of spectral complexity on source parameter measurement. Applying the SD method, we find that frequency bandwidth and time-window length could influence spectral magnitude calibration, while depth-dependent attenuation is important to correctly map stress-drop variations. For the SR method, we find that the selected source model has limited influence on the measurements; however, the Boatwright model tends to produce smaller standard deviation and larger magnitude dependence than the Brune model. Variance reduction threshold, frequency bandwidth, and time-window length, if chosen within an appropriate parameter range, have limited influence on source parameter measurement. For both methods, wave type, attenuation correction, and spectral complexity strongly influence the result. The scale factor that quantifies the magnitude dependence of stress drop show large variations with different processing options, and earthquakes with complex source spectra deviating from the Brune-type source models tend to have larger scale factor than earthquakes without complexity. Based on these detailed comparisons, we make a few specific suggestions for data processing workflows that could help future studies of source parameters and interpretations.

58 GEOSCIENCES↗

Spray Foam Exterior Insulation with Stand-Off Furring - New York

IBACOS and Green Homes America 1 (GHA) collaborated with the New York State Energy Research and Development Authority (NYSERDA) Advanced Buildings Program to research a variation of a commercial curtain wall assembly for residential construction as part of a comprehensive whole-house deep energy retrofit (DER) package. The advantages of this strategy include minimizing the physical connections to each individual existing wall stud, using closedcell spray foam to encapsulate existing siding materials including lead paint, and creating a vented rain screen assembly to promote drying. As Moore (2011) states, "Closed-cell foam acts as air-sealing, insulation, and secondary drainage plane..." Field installations on a limited number of houses indicate that the incremental cost when installed as part of a typical siding and window replacement job adds approximately $10/ft2 of wall area. 2 x 4 framing members were attached to the wall at band joists and top plates using "L" clips, and spray foam was used to insulate the wall after the framing was installed. Windows were installed as the framing was put up, including extension jambs. Key lessons learned include the following: (1) The installed cost of the spray foam system was comparable to the installed cost of the rigid foam and furring strips. (2) Spray foam should be applied in such a way that it locks the framing members in place before the remaining foam is installed in the field of the wall. The spray foam has a tendency to move the new wall framing as it expands. Best practice is to "picture frame" the wall framing with spray foam and then apply the spray foam in the field of each bay. (3) Variations in the existing siding conditions must be accounted for when attaching the ledger boards and wall framing. A best practice is to uniformly shim the ledger boards off the walls so the new framing is a uniform distance from the ledger boards and the inside surface of the interior framing. This is important primarily for window and door installation and the associated extension jambs and trim. (4) From a sequencing perspective, it is advantageous to replace the windows at the same time as the exterior walls are being built. This requires a crew that can perform a number of different tasks (e.g., framing, flashing, window install, trim carpentry) and does not lend itself to subcontracting this approach piecemeal (e.g., framing subcontractor, window installer, drainage plane installer, trim carpenter). (5) Application of the brackets and associated fastener screws was more time consuming than anticipated. (6) It is important for the spray foam contractor to perform all preparatory work, which in this case included placing plastic over the windows and exposed foundation to minimize or eliminate the possibility of damage due to overspray.

Array↗

CONSTRAINTS ON THE OPACITY PROFILE OF THE SUN FROM HELIOSEISMIC OBSERVABLES AND SOLAR NEUTRINO FLUX MEASUREMENTS

Motivated by the solar composition problem and by using the recently developed linear solar model approach, we analyze the role of opacity and metals in the Sun. After a brief discussion of the relation between the effects produced by a variation of composition and those produced by a modification of the radiative opacity, we calculate numerically the opacity kernels that, in a linear approximation, relate an arbitrary opacity variation to the corresponding modification of the solar observable properties. We use these opacity kernels to discuss the present constraints on opacity (and composition) provided by helioseismic and solar neutrino data.

79 ASTRONOMY AND ASTROPHYSICS↗

RECENT STELLAR MASS ASSEMBLY OF LOW-MASS STAR-FORMING GALAXIES AT REDSHIFTS 0.3 < z < 0.9

The epoch when low-mass star-forming galaxies (LMSFGs) form the bulk of their stellar mass is uncertain. While some models predict an early formation, others favor a delayed scenario until later ages of the universe. We present constraints on the star formation histories (SFHs) of a sample of LMSFGs obtained through the analysis of their spectral energy distributions using a novel approach that (1) consistently combines photometric (broadband) and spectroscopic (equivalent widths of emission lines) data, and (2) uses physically motivated SFHs with non-uniform variations of the star formation rate (SFR) as a function of time. The sample includes 31 spectroscopically confirmed LMSFGs (7.3 ≤ log M {sub *}/M {sub ☉} ≤ 8.0), at 0.3 < z {sub spec} < 0.9, in the Extended-Chandra Deep Field-South field. Among them, 24 were selected with photometric stellar mass log M {sub *}/M {sub ☉} < 8.0, 0.3 < z {sub phot} < 1.0, and m {sub NB816,} {sub AB} < 26 mag; the remaining 7 were selected as blue compact dwarfs within the same photometric redshift and magnitude ranges. We also study a secondary sample of 43 more massive spectroscopically confirmed galaxies (8.0 < log M {sub *}/M {sub ☉} ≤ 9.1), selected with the same criteria. The SFRs and stellar masses derived for both samples place our targets on the standard main sequence of star-forming galaxies. The median SFH of LMSFGs at intermediate redshifts appears to form 90% of the median stellar mass inferred for the sample in the ∼0.5-1.8 Gyr immediately preceding the observation. These results suggest a recent stellar mass assembly for LMSFGs, consistent with the cosmological downsizing trends. We find similar median SFH timescales for the more massive secondary sample.

79 ASTRONOMY AND ASTROPHYSICS↗

A chromosome-level genome assembly of the varied leaved jewelflower, Streptanthus diversifolius, reveals a recent whole genome duplication

Abstract The Streptanthoid complex, a clade of primarily Streptanthus and Caulanthus species in the Thelypodieae (Brassicaceae) is an emerging model system for ecological and evolutionary studies. This complex spans the full range of the California Floristic Province including desert, foothill, and mountain environments. The ability of these related species to radiate into dramatically different environments makes them a desirable study subject for exploring how plant species expand their ranges and adapt to new environments over time. Ecological and evolutionary studies for this complex have revealed fascinating variation in serpentine soil adaptation, defense compounds, germination, flowering, and life history strategies. Until now a lack of publicly available genome assemblies has hindered the ability to relate these phenotypic observations to their underlying genetic and molecular mechanisms. To help remedy this situation, we present here a chromosome-level genome assembly and annotation of Streptanthus diversifolius, a member of the Streptanthoid Complex, developed using Illumina, Hi-C, and HiFi sequencing technologies. Construction of this assembly also provides further evidence to support the previously reported recent whole genome duplication unique to the Thelypodieae. This whole genome duplication may have provided individuals in the Streptanthoid Complex the genetic arsenal to rapidly radiate throughout the California Floristic Province and to occupy commonly inhospitable environments including serpentine soils.

Genetics & Heredity↗

Variational AutoEncoders Reveal Intensifying GPP Extremes in Continental United States based on CESM2 Simulations

Climate extremes significantly impact terrestrial carbon cycle dynamics, necessitating robust methods for detecting and analyzing anomalous behavior in plant productivity. This study presents a novel application of variational autoencoders (VAE) for identifying extreme events in gross primary productivity (GPP) from Community Earth System Model version 2 simulations across four AR6 regions in the Continental United States. We compare VAE-based anomaly detection with traditional singular spectral analysis (SSA) methods across three time periods: 1850-80, 1950-80, and 2050-80 under SSP5-8.5 scenario. The VAE architecture employs three dense layers and a latent space with input sequence length of 12 months, training on normalized GPP time series to reconstruct the GPP and identify anomalies based on reconstruction errors. Extreme events are defined using 5th percentile thresholds applied to both VAE and SSA anomalies. Results demonstrate strong regional agreement between VAE and SSA methods in spatial patterns of extreme event frequencies, despite VAE consistently producing higher threshold values (179-756 GgC for VAE vs. 100-784 GgC for SSA across regions and periods). Both methods reveal increasing magnitudes and frequencies of negative carbon cycle extremes toward 2050-80, particularly in Western and Central North America. The VAE approach shows comparable performance to established SSA techniques while offering computational advantages and enhanced capability for capturing non-linear temporal dependencies in carbon cycle variability. This research demonstrates the potential of deep learning approaches for extremes detection and provides a foundation for improved understanding of future carbon cycle risks under future conditions.

Sharma, Bharat [ORNL] (ORCID:0000000266982487)↗

Peatland hydrology across scale: a probabilistic framework for confronting variability, heterogeneity, and uncertainty (Final Report)

Our project aimed to guide the representations of peatland hydrology and water-carbon feedbacks within Earth System Models, by improving process understanding and developing parsimonious models that elucidate the effects of hydroclimatic variability and spatial heterogeneity. Our research questions centered on the three key drivers of peatland hydrology: (1) seasonal and interannual hydroclimatic fluctuations, (2) spatial heterogeneity of peatland microtopography, and (3) hydrological connectivity across landscape units within a peatland watershed. Our analyses and model testing used existing long-term datasets within the Marcell Experimental Forest (MEF), with new data collected whenever necessary. To date, we have demonstrated the strong influence of water table elevations on the temperature sensitivity of CH 4 emissions, using a newly developed eddy covariance dataset spanning eleven years at MEF. Specifically, higher water tables dampen the increase in CH 4 emissions in the spring as well as their decrease in the fall, resulting in hysteresis. These results imply that any hydroclimatological changes in peatlands that shift seasonal water availability from winter to summer will increase annual CH 4 emissions, even if soil temperature remains unchanged. To further investigate water table elevation change within the peatland microtopography, we installed automated water table gauges across four bog-forest transects (the “lagg”) in two peatland watersheds at MEF, which are hotspots of intense biogeochemical activity. These measurements will give us new information about the extent of lagg expansion and contraction during snowmelt and high intensity rainfall events, as well as the directionality of water and nutrient flow into the bog from the surrounding forests. Finally, we investigated the hydrological connectivity across the peatland watershed complex during early spring – a critical period where water table is elevated from snowmelt – using extended hydrological records from MEF (e.g., snow and frost depths, water table elevations, streamflow). The importance of thermal and wintertime processes within the Energy Exascale Earth System Model (E3SM) was determined through sensitivity analyses. Results from data analyses show that (i) streamflow has decreased over decades likely due to increased evapotranspiration rates (despite no detectable trends in precipitation), (ii) spring streamflow generation is controlled by a sequence of fill-and-spill pathways from the snowpack to the stream through peatland water stores, and (iii) frost depth is a key explanatory variable for the timing and magnitude of streamflow. These results suggest that frost plays an important role in connecting surface water storage in peatlands to stream outlets, and that the hydrological connectivity across the peatland watershed complex can mediate the sensitivity of hydrological responses to climate variations.

54 ENVIRONMENTAL SCIENCES↗

Deployment Effects of Marin Renewable Energy Technologies

Given proper care in siting, design, deployment, operation and maintenance, marine and hydrokinetic technologies could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood, due to a lack of technical certainty. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based approach to the emerging wave and tidal technology sectors in order to evaluate the impact of these technologies on the marine environment and potentially conflicting uses. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios will capture variations in technical approaches and deployment scales to properly identify and characterize environmental impacts and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential effects of these emerging technologies and focus all stakeholders onto the critical issues that need to be addressed. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory and navigational issues. The results of this study are structured into three reports: 1. Wave power scenario description 2. Tidal power scenario description 3. Framework for Identifying Key Environmental Concerns This is the second report in the sequence and describes the results of conceptual feasibility studies of tidal power plants deployed in Tacoma Narrows, Washington. The Narrows contain many of the same competing stakeholder interactions identified at other tidal power sites and serves as a representative case study. Tidal power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize impacts, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informs the process of selecting representative tidal power devices. The selection criteria is that such devices are at an advanced stage of development to reduce technical uncertainties and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. A number of other developers are also at an advanced stage of development including Verdant Power, which has demonstrated an array of turbines in the East River of New York, Clean Current, which has demonstrated a device off Race Rocks, BC, and OpenHydro, which has demonstrated a device at the European Marine Energy Test Center and is on the verge of deploying a larger device in the Bay of Fundy. MCT demonstrated their device both at Devon (UK) and Strangford Narrows (Northern Ireland). Furthermore OpenHydro, CleanCurrent, and MCT are the three devices being installed at the Minas Passage (Canada). Environmental effects will largely scale with the size of tidal power development. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) an early, small commercial deployment, and (3) a large commercial scale plant. For the three technologies and scales at the selected site, this results in a total of nine deployment scenarios outlined in the report.

16 TIDAL AND WAVE POWER↗

Quantization of systems with temporally varying discretization. II. Local evolution moves

Several quantum gravity approaches and field theory on an evolving lattice involve a discretization changing dynamics generated by evolution moves. Local evolution moves in variational discrete systems (1) are a generalization of the Pachner evolution moves of simplicial gravity models, (2) update only a small subset of the dynamical data, (3) change the number of kinematical and physical degrees of freedom, and (4) generate a dynamical (or canonical) coarse graining or refining of the underlying discretization. To systematically explore such local moves and their implications in the quantum theory, this article suitably expands the quantum formalism for global evolution moves, constructed in Paper I [P. A. Höhn, “Quantization of systems with temporally varying discretization. I. Evolving Hilbert spaces,” J. Math. Phys. 55, 083508 (2014); e-print http://arxiv.org/abs/arXiv:1401.6062 [gr-qc]], by employing that global moves can be decomposed into sequences of local moves. This formalism is spelled out for systems with Euclidean configuration spaces. Various types of local moves, the different kinds of constraints generated by them, the constraint preservation, and possible divergences in resulting state sums are discussed. It is shown that non-trivial local coarse graining moves entail a non-unitary projection of (physical) Hilbert spaces and “fine grained” Dirac observables defined on them. Identities for undoing a local evolution move with its (time reversed) inverse are derived. Finally, the implications of these results for a Pachner move generated dynamics in simplicial quantum gravity models are commented on.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of rat serum amyloid A4 (SAA4): A novel member of the SAA superfamily

Highlights: • The full length rat SAA4 (rSAA4) mRNA was characterized by rapid amplification of cDNA ends. • rSAA4 mRNA has 1830 bases including a GA dinucleotide tandem repeat in the 5′UTR. • Three consecutive C/EBP promoter elements are crucial for transcription of rSAA4. • rSAA4 is abundantly expressed in the liver on mRNA and protein level. - Abstract: The serum amyloid A (SAA) family of proteins is encoded by multiple genes, which display allelic variation and a high degree of homology in mammals. The SAA1/2 genes code for non-glycosylated acute-phase SAA1/2 proteins, that may increase up to 1000-fold during inflammation. The SAA4 gene, well characterized in humans (hSAA4) and mice (mSaa4) codes for a SAA4 protein that is glycosylated only in humans. We here report on a previously uncharacterized SAA4 gene (rSAA4) and its product in Rattus norvegicus, the only mammalian species known not to express acute-phase SAA. The exon/intron organization of rSAA4 is similar to that reported for hSAA4 and mSaa4. By performing 5′- and 3′RACE, we identified a 1830-bases containing rSAA4 mRNA (including a GA-dinucleotide tandem repeat). Highest rSAA4 mRNA expression was detected in rat liver. In McA-RH7777 rat hepatoma cells, rSAA4 transcription was significantly upregulated in response to LPS and IL-6 while IL-1α/β and TNFα were without effect. Luciferase assays with promoter-truncation constructs identified three proximal C/EBP-elements that mediate expression of rSAA4 in McA-RH7777 cells. In line with sequence prediction a 14-kDa non-glycosylated SAA4 protein is abundantly expressed in rat liver. Fluorescence microscopy revealed predominant localization of rSAA4-GFP-tagged fusion protein in the ER.

60 APPLIED LIFE SCIENCES↗

Synthesis, crystal structure and magnetic properties of Li{sub 2}InMo{sub 3}O{sub 8}: A novel reduced molybdenum oxide containing magnetic Mo{sub 3} clusters

Powder samples and single crystals of Li{sub 2}InMo{sub 3}O{sub 8} were obtained by solid state reaction. The structure was determined by single-crystal X-ray diffraction (771 independent reflections for 33 refinable, R1=0.0158 and wR2=0.0354). Li{sub 2}InMo{sub 3}O{sub 8} is isomorphous with Li{sub 2}SnMo{sub 3}O{sub 8} and crystallizes in the hexagonal space group P6{sub 3}mc with unit-cell parameters a=5.7931(2) Å, c=10.4681(4) Å and Z=2. The crystal structure consists of distorted hexagonal-close-packed oxygen layers with stacking sequence abac along [0 0 1] and that are held together by alternating lithium–indium and molybdenum layers. The Li{sup +} and In{sup 3+} ions occupy, respectively, tetrahedral and octahedral sites in the ratio 2:1. The Mo atoms occupy octahedral sites and form strongly bonded triangular clusters involving three MoO{sub 6} octahedra that are each shared along two edges, constituting a Mo{sub 3}O{sub 13} unit. The variations of the Mo–Mo and Mo–O bond lengths according to the number of electrons per Mo{sub 3} cluster are discussed. The trivalent oxidation state of the indium leads to one unpaired electron per Mo{sub 3} and thus gives rise to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. The magnetic susceptibility vs. temperature curve also shows a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters. - Graphical abstract: We present here the synthesis, the crystal structure, and the magnetic properties of the new quaternary compound Li{sub 2}InMo{sub 3}O{sub 8} containing magnetic Mo{sub 3}O{sub 13} units with one unpaired electron. - Highlights: • The new quaternary reduced molybdenum oxide containing Mo{sub 3} clusters, Li{sub 2}InMo{sub 3}O{sub 8}, was synthesized by solid state reaction. • Single-crystal X-ray study. • One unpaired electron per Mo{sub 3} cluster leading to a paramagnetic spin behavior with an effective magnetic moment of 1.5 μ{sub B} per Mo{sub 3} cluster. • Magnetic susceptibility measurements show a maximum at 25 K arising probably from an antiferromagnetic ordering between the Mo{sub 3} clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A systematic approach to vertically excited states of ethylene using configuration interaction and coupled cluster techniques

A systematic sequence of configuration interaction and coupled cluster calculations were used to describe selected low-lying singlet and triplet vertically excited states of ethylene with the goal of approaching the all electron, full configuration interaction/complete basis set limit. Included among these is the notoriously difficult, mixed valence/Rydberg {sup 1}B{sub 1u} V state. Techniques included complete active space and iterative natural orbital configuration interaction with large reference spaces which led to variational spaces of 1.8 × 10{sup 9} parameters. Care was taken to avoid unintentionally biasing the results due to the widely recognized sensitivity of the V state to the details of the calculation. The lowest vertical and adiabatic ionization potentials to the {sup 2}B{sub 3u} and {sup 2}B{sub 3} states were also determined. In addition, the heat of formation of twisted ethylene {sup 3}A{sub 1} was obtained from large basis set coupled cluster theory calculations including corrections for core/valence, scalar relativistic and higher order correlation recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

INVESTIGATING PLANET FORMATION IN CIRCUMSTELLAR DISKS: CARMA OBSERVATIONS OF RY Tau AND DG Tau

We present CARMA observations of the thermal dust emission from the circumstellar disks around the young stars RY Tau and DG Tau at wavelengths of 1.3 mm and 2.8 mm. The angular resolution of the maps is as high as 0.''15, or 20 AU at the distance of the Taurus cloud, which is a factor of 2 higher than has been achieved to date at these wavelengths. The unprecedented detail of the resulting disk images enables us to address three important questions related to the formation of planets. (1) What is the radial distribution of the circumstellar dust? (2) Does the dust emission show any indication of gaps that might signify the presence of (proto-)planets? (3) Do the dust properties depend on the orbital radius? We find that modeling the disk surface density in terms of either a classical power law or the similarity solution for viscous disk evolution reproduces the observations well. Both models constrain the surface density between 15 and 50 AU to within 30% for a given dust opacity. Outside this range, the densities inferred from the two models differ by almost an order of magnitude. The 1.3 mm image from RY Tau shows two peaks separated by 0.''2 with a decline in the dust emission toward the stellar position, which is significant at about 2{sigma}-4{sigma}. For both RY Tau and DG Tau, the dust emission at radii larger than 15 AU displays no significant deviation from an unperturbed viscous disk model. In particular, no radial gaps in the dust distribution are detected. Under reasonable assumptions, we exclude the presence of planets more massive than 5 M{sub J} orbiting either star at distances between about 10 and 60 AU, unless such a planet is so young that there has been insufficient time to open a gap in the disk surface density. The radial variation of the dust opacity slope, {beta}, was investigated by comparing the 1.3 mm and 2.8 mm observations. We find mean values of {beta} of 0.5 and 0.7 for DG Tau and RY Tau, respectively. Variations in {beta} are smaller than {Delta}{beta} = 0.7 between 20 and 70 AU. These results confirm that the circumstellar dust throughout these disks differs significantly from dust in the interstellar medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraining neutrino cooling using the hot white dwarf luminosity function in the globular cluster 47 Tucanae

We present Hubble Space Telescope observations of the upper part (T{sub eff}>10{sup 4} K) of the white dwarf cooling sequence in the globular cluster 47 Tucanae and measure a luminosity function of hot white dwarfs. Comparison with previous determinations from large-scale field surveys indicates that the previously determined plateau at high effective temperatures is likely a selection effect, as no such feature is seen in this sample. Comparison with theoretical models suggests that the current estimates of white dwarf neutrino emission (primarily by the plasmon channel) are accurate, and variations are restricted to no more than a factor of two globally, at 95% confidence. We use these constraints to place limits on various proposed exotic emission mechanisms, including a nonzero neutrino magnetic moment, formation of axions, and emission of Kaluza–Klein modes into extra dimensions.

79 ASTRONOMY AND ASTROPHYSICS↗