Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Petalite under pressure: Elastic behavior and phase stability

The lithium aluminosilicate mineral petalite (LiAlSi 4 O 10 ) has been studied using high-pressure single-crystal X-ray diffraction (HP-XRD) up to 5 GPa. Petalite undergoes two pressure-induced first-order phase transitions, never reported in the literature, at ca. 1.5 and 2.5 GPa. The first of these transforms the low-pressure α-phase of petalite (P2/c) to an intermediate β-phase that then fully converts to the high-pressure β-phase at ca. 2.5 GPa. The α→β transition is isomorphic and is associated with a commensurate modulation that triples the unit cell volume. Analysis of the HP-XRD data show that although the fundamental features of the petalite structure are retained through this transition, there are subtle alterations in the internal structure of the silicate double-layers in the β-phase relative to the α-phase. Measurement of the unit cell parameters of petalite as a function of pressure, and fitting of the data with 3rd order Birch-Murnaghan equations of state, has provided revised elastic constants for petalite. The bulk moduli of the α and β-phases are 49(1) and 35(3) GPa, respectively. These values indicate that the compressibility of the- phase of petalite lies between the alkali feldpsars and alkali feldspathoids, whereas the β-phase has a compressibility more comparable with layered silicates. Structure analysis has shown that the compression of the -phase is facilitated by the rigid body movement of the Si 2 O 7 units from which the silicate double-layers are constructed.

36 MATERIALS SCIENCE↗

Fundamentals of Hydrogen Solubility in Calcium-Alumino-Silicate Molten Fluxes Containing NaF

The effect of the NaF and CaO/SiO{sub 2} ratio (mass percentage ratio) on hydrogen solubility in a CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-NaF system was studied and correlated to the structural units of the molten flux. Fourier transformed infrared, Raman, and X-ray photoelectron spectroscopy analyses were used to evaluate the structural units with NaF additions and various CaO/SiO{sub 2} ratios. At a CaO/SiO{sub 2} ratio of 0.8, the incorporated-hydroxyl dissolution mechanism is dominant, whereas the free-hydroxyl mechanism is pronounced at higher CaO/SiO{sub 2} ratio. At low NaF contents, the hydrogen solubility as a function of the CaO/SiO{sub 2} ratio showed a parabolic trend with a minimum typical of a change from incorporated- to a free-hydroxyl dissolution mechanism. The addition of network-modifying NaF depolymerizes the structural units of the flux, reducing the available sites for incorporated-hydroxyl groups. The hydrogen solubility behavior in the flux system correlates well with the structural analysis, where a high NaF content and CaO/SiO{sub 2} ratio are shown to depolymerize the complex structural units of the molten flux.

36 MATERIALS SCIENCE↗

Structures of minute virus of mice replication initiator protein N-terminal domain: Insights into DNA nicking and origin binding

Members of the Parvoviridae family all encode a non-structural protein 1 (NS1) that directs replication of single-stranded viral DNA, packages viral DNA into capsid, and serves as a potent transcriptional activator. Here we report the X-ray structure of the minute virus of mice (MVM) NS1 N-terminal domain at 1.45 Å resolution, showing that sites for dsDNA binding, ssDNA binding and cleavage, nuclear localization, and other functions are integrated on a canonical fold of the histidine-hydrophobic-histidine superfamily of nucleases, including elements specific for this Protoparvovirus but distinct from its Bocaparvovirus or Dependoparvovirus orthologs. High resolution structural analysis reveals a nickase active site with an architecture that allows highly versatile metal ligand binding. The structures support a unified mechanism of replication origin recognition for homotelomeric and heterotelomeric parvoviruses, mediated by a basic-residue-rich hairpin and an adjacent helix in the initiator proteins and by tandem tetranucleotide motifs in the replication origins. - Highlights: • The structure of a parvovirus replication initiator protein has been determined; • The structure sheds light on mechanisms of ssDNA binding and cleavage; • The nickase active site is preconfigured for versatile metal ligand binding; • The binding site for the double-stranded replication origin DNA is identified; • A single domain integrates multiple functions in virus replication.

60 APPLIED LIFE SCIENCES↗

Disconnection-Mediated Transition in Segregation Structures at Twin Boundaries

Twin boundaries play an important role in the thermodynamics, stability, and mechanical properties of nanocrystalline metals. Understanding their structure and chemistry at the atomic scale is key to guide strategies for fabricating nanocrystalline materials with improved properties. In this work, we report an unusual segregation phenomenon at gold-doped platinum twin boundaries, which is arbitrated by the presence of disconnections, a type of interfacial line defect. By using atomistic simulations, we show that disconnections containing a stacking fault can induce an unexpected transition in the interfacial-segregation structure at the atomic scale, from a bilayer, alternating-segregation structure to a trilayer, segregation-only structure. This behavior is found for faulted disconnections of varying step heights and dislocation characters. Supported by a structural analysis and the classical Langmuir–McLean segregation model, we reveal that this phenomenon is driven by a structurally induced drop of the local pressure across the faulted disconnection accompanied by an increase in the segregation volume.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating silicene as a potential cathode host to immobilize polysulfides in lithium–sulfur batteries

The internal shuttle effect caused by polysulfides dissolution and migration negatively impacts lithium–sulfur battery performance. In this paper, a mesoscale simulation strategy, which involves atomistic calculation and coarse-grained molecular modeling, is employed to evaluate silicene as a potential cathode host material to immobilize polysulfides. Adsorption energies of insoluble polysulfides (Li 2 S x with x =1, 2) and soluble polysulfide Li 2 S 4 on pristine and doped silicene sheets are calculated. Results show that the adsorption is thermodynamically favorable and N-doped silicene is helpful in trapping intermediate discharge products, Li 2 S 2 and Li 2 S 4 . The dissociation and reduction of long-chain polysulfides to short-chain polysulfides are observed. Electronic structure analysis shows that Li 2 S x molecules interact with silicene via strong chemical bonds. The atomistic structure evolution of Li 2 S layer formation on silicene is also investigated in this study. It is found that Li 2 S (110) layer forms first, and then, it is converted to Li 2 S (111) layer by introducing more Li 2 S molecules to the substrate. Li 2 S (111)/silicene interfacial structure is thermodynamically stable, and the interaction is dominated by Li–Si bonds. A coarse-grained model is developed to study and compare the growth of Li 2 S on silicene and graphene. Lastly, Li 2 S-induced surface coverage is faster on silicene than on graphene, which indicates that a silicene-based cathode host will experience more acute surface passivation, which will adversely affect cathode performance.

25 ENERGY STORAGE↗

A Structural and Ellipsometric Investigation of Thin Gallium Oxide Layers Deposited on Si by Means of Laser Deposition

The morphology of Ga{sub 2}O{sub 3} layers deposited on a silicon substrate by pulse laser deposition is studied using scanning electron microscopy in the thickness range of 30–200 nm. Using spectroscopic ellipsometry in the wavelength range from 250 to 900 nm, the thickness of layers and dispersion of their optical parameters (complex pseudodielectric function ε, refractive and absorptive indices) have been determined and the fraction of voids has been estimated in the scope of the Bruggeman effective medium approximation. In the spectrum of the imaginary part ε{sub 2}, there is observed an increase in values in the region of energy E = 4.8 eV corresponding to the direct interband transition in the Ga{sub 2}O{sub 3} structure. X-ray structure analysis showed the presence of peaks typical for the β-Ga{sub 2}O{sub 3} structure. The results of the investigations can be used for the formation of wide-bandgap gallium oxide layers in developing devices of power electronics and in creating optoelectronic devices for the UV range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and conformational dynamics of Clostridioides difficile toxin A

Clostridioides difficile toxin A and B (TcdA and TcdB) are two major virulence factors responsible for diseases associated with C. difficile infection (CDI). Here, we report the 3.18-Å resolution crystal structure of a TcdA fragment (residues L843–T2481), which advances our understanding of the complete structure of TcdA holotoxin. Our structural analysis, together with complementary single molecule FRET and limited proteolysis studies, reveal that TcdA adopts a dynamic structure and its CROPs domain can sample a spectrum of open and closed conformations in a pH-dependent manner. Furthermore, a small globular subdomain (SGS) and the CROPs protect the pore-forming region of TcdA in the closed state at neutral pH, which could contribute to modulating the pH-dependent pore formation of TcdA. A rationally designed TcdA mutation that trapped the CROPs in the closed conformation showed drastically reduced cytotoxicity. Taken together, these studies shed new lights into the conformational dynamics of TcdA and its roles in TcdA intoxication.

59 BASIC BIOLOGICAL SCIENCES↗

Involute Working Group – FSI Analysis of Fuel Plates Using Finite Volume and Finite Element Methods

The three involute plate research reactors RHF, HFIR, and FRM II have expressed an interest in using computational software to carry their steady-state safety analysis. Since these tools represent a significant departure from the methods used currently (one-dimensional), the acceptability of the new approach by regulators requires thorough verification and validation of these tools. Therefore, Argonne National Laboratory and the three involute-plate reactors formed an informal group called the Involute Working Group aiming at qualifying computational tools to perform steady-state safety analysis. The present report focuses on a comparison of finite volume and finite element methods to model solids in fluid-structure interaction problems with the goal to estimate the coolant flow-induced fuel plate deflections obtained with the two methods. The finite volume method will be obsoleted in STARCCM+ by the end of 2021, nevertheless, this evaluation is important because the method was used by ANL researchers to model the response of the fuel plates, despite its drawbacks, which are discussed in the report. It was essential to check how those estimates compare to the results obtained with the finite element method that is considered superior for structural analysis. Various geometries, i.e., flat, cylindrical and circle-involute fuel plates, as well as coolant flow speed, were considered. The comparison shows that, independently of the plate geometry, the finite volume method significantly underestimates the deflection as compared to finite element method for coarser meshes. When the discretization is developed as a result of a mesh sensitivity study using finite element method, the result obtained using finite volume method can be a few times smaller than the corresponding finite element method solution. A code-to-code comparison , between STAR-CCM+ and LS-DYNA was included in the analysis. Within the LS-DYNA models, two types of finite element formulations were used: solid and shell finite elements. Mesh sensitivity study showed that both approaches converge to a similar value that was obtained with STAR-CCM+ finite element solver. The evaluation of the computational solvers was extended by adding two benchmark cases from the STAR-CCM+ Verification Suite and presented in the Appendix A. The selected cases are: (1) bending of a cantilever beam under external load, and (2) cylindrical shell deformation analysis, known in the literature as ‘Scordelis-Lo roof’. The problems were solved with finite volume, and finite element methods, and the results confirmed the previously discussed findings. The analysis shows that the finite element solver is superior to the finite volume solver in terms of representation of model geometry and estimating the structural behavior of fuel plates. Depending on the ratio of the load to the flexibility of the plate, the finite volume solver can greatly under- or overestimate the structural response if a very carefully selected mesh is not used.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Magnetic exchange interaction in gadolinium(III) complex having aliphatic nitroxide radical TEMPO

We synthesized a new compound, [Gd(hfac){sub 3}(MeOH)(TEMPO)] (TEMPO = 2,2,6,6-tetramethylpiperidin-1-oxyl; Hhfac = 1,1,1,5,5,5-hexafluoropentane-2,4-dione) with the metal/radical ratio of 1/1. This compound has an advantage in the magnetic analysis, because the exchange coupling system is described with a unique coupling parameter J, when compared to the structure and magnetic properties of the previous TEMPO and related complexes. The X-ray crystal structure analysis of [Gd(hfac){sub 3}(MeOH)(TEMPO)] revealed the N-O and Gd-O(N) bond lengths are 1.299(9) and 2.307(5) Å, respectively, and the Gd-O-N angle is 149.4(5)°. The magnetic study clarified the Gd{sup 3+}-radical antiferromagnetic interaction of 2J/k{sub B} = −3.5(1) K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Circular Reprocessing of Thermoset Polyurethane Foams

Thermoset polyurethane (PU) foams are widely used in industrial applications, but they cannot be recycled by conventional melt reprocessing because of their cross-linked structures. The introduction of carbamate exchange catalysts converts thermoset PU into covalent adaptable networks (CANs), which are amenable to reprocessing at elevated temperatures. However, this approach has produced solid PU films, which have fewer uses and lower commercial demand. In this work, simultaneous reprocessing and refoaming of thermoset PU foams is demonstrated by leveraging the melt-processability of PU CANs and allowing cell growth by gas generation in a twin-screw extruder. The optimal operating temperature of the refoaming process is determined through chemical, thermal, and structural analysis of PU foam extrudates. The foam-to-foam extrusion process produces controllable, continuous, and uniform foam structures, as characterized by cell diameter and cell number density. Low-density PU foams are obtained through a process simulating injection molding. The compression properties of reprocessed PU foam are compared with as-synthesized PU foam to demonstrate efficacy of the refoaming processes. These results demonstrate that PU foams can be prepared through recycling while maintaining microstructural and chemical integrity. In the future, this strategy may be applied to thermoset PU foams of various chemical compositions and shows promise for scalability.

36 MATERIALS SCIENCE↗

Structural insight into the role of VAL1 B3 domain for targeting to FLC locus in Arabidopsis thaliana

Vernalization is a pivotal stage for some plants involving many epigenetic changes during cold exposure. In Arabidopsis, an essential step in vernalization for further flowering is successful silence the potent floral repressor Flowering Locus C (FLC) by repressing histone mark. AtVal1 is a multi-function protein containing five domains that participate into many recognition processes and is validated to recruit the repress histone modifier PHD-PRC2 complex and interact with components of the ASAP complex target to the FLC nucleation region through recognizing a cis element known as CME (cold memory element) by its plant-specific B3 domain. Here, we determine the crystal structure of the B3 domain in complex with Sph/RY motif in CME. Our structural analysis reveals the specific DNA recognition by B3 domain, combined with our in vitro experiments, we provide the structural insight into the important implication of AtVAL1-B3 domain in flowering process.

60 APPLIED LIFE SCIENCES↗

Syntheses and characterizations of two new energetic copper–amine-DNANT complexes and their effects on thermal decomposition of RDX

Two novel copper complexes of dinitroacetonitrile (DNANT), Cu(NH{sub 3}){sub 4}(DNANT){sub 2} (1) and Cu(en){sub 2}(DNATN){sub 2} (2), have been synthesized for the first time through an unique reaction, and structurally characterized. The single-crystal X-ray structural analysis shows that the Cu{sup 2+} cations in the two complexes share a similar four-coordinated structure, which however does not directly involve the main energetic DNANT{sup −} anion. The differential scanning calorimetry (DSC) study reveals that the two complexes have higher thermal stability and lower sensitivity than the analogous FOX-7 complexes, and exhibit good catalytic action to the decomposition of RDX. - Graphical abstract: Cu(NH{sub 3}){sub 4}(DNANT){sub 2} (1) and Cu(en){sub 2}(DNATN){sub 2} (2) have been first synthesized through an unique reaction. Cu{sup 2+} ion shares a similar four-coordinated structure in the two complexes. Display Omitted - Highlights: • A new reaction is unexpectedly found, and reaction process was discussed in this work. • Cu(NH{sub 3}){sub 4} (DNANT){sub 2}and Cu(en){sub 2}(DNATN){sub 2} were first synthesized through an unique reaction. • The structures and properties of the two complexes were discussed in detail, and they all present good application performances. • The adjacent amino-hydrazino group in AHDNE exhibits high reactivity. The work is another typical example for the reactivity.

36 MATERIALS SCIENCE↗

Rietveld refinement and dielectric relaxation of a new rare earth based double perovskite oxide: BaPrCoNbO{sub 6}

A new rare earth based double perovskite oxide barium praseodymium cobalt niobate, BaPrCoNbO{sub 6} (BPCN) is synthesized by solid-state reaction technique. Rietveld analysis of X-ray diffraction (XRD) data shows that the compound crystallizes in a perovskite like tetragonal structure which belongs to the I4/mmm space group with lattice parameters a=b=5.6828(9) Å, c=8.063(2) Å. Structural analysis reveals 1:1 ordered arrangement for the Co{sup 2+} and Nb{sup 5+} cations over the six-coordinate B-sites of BPCN. The superlattice line (1 0 1) at 2θ=19.10° arising from the alternate ordering of Co{sup 2+} and Nb{sup 5+} sites is observed in the XRD pattern which confirms the presence of cation ordering in BPCN. Fourier transform infrared spectrum shows two phonon modes of the sample due to the antisymmetric NbO{sub 6} stretching vibration. The relaxation dynamics of the conductive process in BPCN is investigated in the temperature range 303 to 503 K and in the frequency range 100 Hz to 1 MHz using impedance spectroscopy. The relaxation mechanism of the sample in the framework of electric modulus formalism is modeled by Davidson–Cole model (DCM). The values of α (distribution of relaxation time) for the DCM varies from 0.1 to 0.3 which suggests the asymmetric distribution of relaxation time for BPCN. The activation energy of the sample, calculated from both conductivity and modulus spectra, are found to be almost the same ∼0.4 eV, which indicates that the conduction mechanism for BPCN is polaron hopping. The scaling behaviour of the imaginary part of electric modulus suggests that the relaxation follows the same mechanism at various temperatures. - Graphical abstract: Rietveld refinement plot for BPCN. Inset shows the schematic presentation of the BPCN tetragonal unit cell. The Co{sup 2+} atoms are located at the centers of the CoO{sub 6} (blue) octahedra. The Nb{sup 5+} atoms are located at the centers of the NbO{sub 6} (green) octahedra. Display Omitted - Highlights: • BaPrCoNbO{sub 6} is synthesized for the first time. • Rietveld refinement of XRD data confirms tetragonal phase. • XRD confirms the presence of cation ordering in BaPrCoNbO{sub 6}. • The activation energy is ∼0.4 eV. • The conduction mechanism for BPCN is due to polaron hopping.

36 MATERIALS SCIENCE↗

Comparative study of optical and structural properties of electrospun 1-dimensional CaYAl{sub 3}O{sub 7}:Eu{sup 3+} nanofibers and bulk phosphor

We report the optical and structural studies of Eu{sup 3+}-doped 1-dimensional CaYAl{sub 3}O{sub 7} nano-fiber phosphor. CaYAl{sub 3}O{sub 7}:Eu{sup 3+} phosphors were synthesized by electrospinning technique and the pristine nano-fibers were annealed at 900 °C to form well crystallized uniform fibers. Under ultraviolet excitation, the CaYAl{sub 3}O{sub 7}:Eu{sup 3+} exhibited red emission, due to transitions in the 4f states of Eu{sup 3+}. In order to explore the difference between the quantum efficiency of nano-fiber and bulk CaYAl{sub 3}O{sub 7}:Eu{sup 3+} phosphor, detailed structural and optical analyses were carried out. The structural analysis of the CaYAl{sub 3}O{sub 7}:Eu{sup 3+} nano-fibers indicates that the structural environment surrounding the dopant Eu{sup 3+} ion was more unstable in nano-fiber when compared to a bulk sample. Decay curves for both the samples when fitted with double exponential decay model indicate that the nano-fiber has shorter decay time, arising from the larger contribution from the non-radiative decay, due to defect levels introduced in the host lattice. - Highlights: • Synthesis of red nano-phosphor through electrospinning • Luminescence properties of bulk and nano-phosphors are compared. • Inferior emission intensity of the nano-phosphor is analyzed using MEM. • Charge cloud around nano-phosphor was found to be oblique.

36 MATERIALS SCIENCE↗

Photoluminescence performance of thulium doped Li{sub 4}SrCa(SiO{sub 4}){sub 2} under irradiation of ultraviolet and vacuum ultraviolet lights

Highlights: • A novel blue-emitting phosphor Li{sub 4}SrCa(SiO{sub 4}){sub 2}:Tm{sup 3+} was reported. • Li{sub 4}SrCa(SiO{sub 4}){sub 2}:Tm{sup 3+} exhibited excellent thermal and irradiation stability. • Li{sub 4}SrCa(SiO{sub 4}){sub 2}:Tm{sup 3+} was found to possess high color purity. - Abstract: In this work, we synthesized Tm{sup 3+} doped Li{sub 4}SrCa(SiO{sub 4}){sub 2} phosphors and investigated their photoluminescence properties under the excitation of ultraviolet and vacuum ultraviolet lights. The crystal structure analysis and variation of cell parameters confirm that Tm{sup 3+} ions have been successfully doped in the structure of Li{sub 4}SrCa(SiO{sub 4}){sub 2} host by occupying the sites of Ca{sup 2+} with the coordination number of 6. The luminescence results suggest that Li{sub 4}SrCa(SiO{sub 4}){sub 2}:Tm{sup 3+} is a good blue-emitting phosphor when excited by ultraviolet and vacuum ultraviolet irradiations. In addition, it is observed that there is nearly no degradation for Li{sub 4}SrCa(SiO{sub 4}){sub 2}:Tm{sup 3+} after undergoing thermal and irradiation treatments. Possible mechanisms for the luminescence processes are proposed on the basis of the discussion of excitation and emission spectra. In particular, the emission color of Li{sub 4}SrCa(SiO{sub 4}){sub 2}:Tm{sup 3+} by excitation of 147 and 172 nm irradiations is very close to the standard blue color, suggesting that it could be potentially applied in plasma display panels and mercury-free fluorescence lamps.

36 MATERIALS SCIENCE↗