Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Plasma Processing of Superconducting Radio Frequency Cavities

The development of plasma processing technology of superconducting radio frequency (SRF) cavities not only provides a chemical free and less expensive processing method, but also opens up the possibility for controlled modification of the inner surfaces of the cavity for better superconducting properties. The research was focused on the transition of plasma etching from two dimensional flat surfaces to inner surfaces of three dimensional (3D) structures. The results could be applicable to a variety of inner surfaces of 3D structures other than SRF cavities. Understanding the A r/C L plasma etching mechanism is crucial for achieving the desired modification of Nb SRF cavities. In the process of developing plasma etching technology, an apparatus was built and a method was developed to plasma etch a single cell Pill Box cavity. The plasma characterization was done with the help of optical emission spectroscopy. The Nb etch rate at various points of this cavity was measured before processing the SRF cavity. Cylindrical ring-type samples of Nb placed on the inner surface of the outer wall were used to measure the dependence of the process parameters on plasma etching. The measured etch rate dependence on the pressure, rf power, dc bias, temperature, CI2 concentration and diameter of the inner electrode was determined. The etch rate mechanism was studied by varying the temperature of the outer wall, the dc bias on the inner electrode and gas conditions. In a coaxial plasma reactor, uniform plasma etching along the cylindrical structure is a challenging task due to depletion of the active radicals along the gas flow direction. The dependence of etch rate uniformity along the cylindrical axis was determined as a function of process parameters. The formation of dc self-biases due to surface area asymmetry in this type of plasma and its variation on the pressure, rf power and gas composition was measured. Enhancing the surface area of the inner electrode to reduce the asymmetry was studied by changing the contour of the inner electrode. The optimized contour of the electrode based on these measurements was chosen for SRF cavity processing.

Upadhyay, Janardan↗
DOE OSTI2019

Boosting Cell Performance of LiNi 0.8 Co 0.15 A 0.05 O 2 via Surface Structure Design

Although the high energy density and environmental benignancy of LiNi 0.8 Co 0.15 A 0.05 O 2 (NCA) holds promise for use as cathode material in Li-ion batteries, present low rate capabilities, and fast capacity fade limit its broad commercial applications. Here, it is reported that surface modification of NCA cathode (R-3m) with 5 nm-thick nanopillar layers and Fm-3m structures significantly improves electrode structure, morphology, and electrochemical performance. The formation of nanopillar layers increases cycling and working voltage stability of NCA by shielding the host material from hydrofluoric acid and improves structural stability with the electrolyte. The modified NCA cathode exhibits an enhanced 89% capacity retention at a rate of 1 C over that of pristine NCA (75.2%) after 150 cycles and effectively suppresses working voltage fade (a drop of 0.025 V after 300 cycles) during repeated charge-discharge cycles. In addition, the diffusion barrier of Li ions in NCA crystals at 0.80 V is noticeably smaller than that of Li ions in pristine NCA (0.87 eV). These findings demonstrate that this unique surface structure design considerably enhances cycle and rate performance of NCA, which has potential applications in other Ni-rich layered cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Bioinspired Diversification Approach Toward the Total Synthesis of Lycodine-Type Alkaloids

Nitrogen heterocycles (azacycles) are common structural motifs in numerous pharmaceuticals, agrochemicals, and natural products. Many powerful methods have been developed and continue to be advanced for the selective installation and modification of nitrogen heterocycles through C–H functionalization and C–C cleavage approaches, revealing new strategies for the synthesis of targets containing these structural entities. Here, we report the first total syntheses of the lycodine-type Lycopodium alkaloids casuarinine H, lycoplatyrine B, lycoplatyrine A, and lycopladine F as well as the total synthesis of 8,15-dihydrohuperzine A through bioinspired late-stage diversification of a readily accessible common precursor, N-desmethyl-β-obscurine. Key steps in the syntheses include oxidative C–C bond cleavage of a piperidine ring in the core structure of the obscurine intermediate and site-selective C–H borylation of a pyridine nucleus to enable cross-coupling reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermodynamically Driven Synthetic Optimization for Cation-Disordered Rock Salt Cathodes

Relating the synthesis conditions of materials to their functional performance has long been an experience-based trial-and-error process. However, this methodology is not always efficient in identifying an appropriate protocol and can lead to overlooked opportunities for the performance optimization of materials through simple modifications of the synthesis process. In this work, we systematically track the structural evolution in the synthesis of a representative disordered rocksalt (a promising next-generation Li-ion cathode material) at the scale of both the long-range crystal structure and the short-range atomic structure using various in situ and ex situ techniques, including transmission electron microscopy, X-ray diffraction, and pair distribution function analysis. Further, an optimization strategy is proposed for the synthesis protocol, leading to a remarkably enhanced capacity (specific energy) of 313 mAh g –1 (987 Wh kg –1 ) at a low rate (20 mA g –1 ), with a capacity of more than 140 mAh g –1 retained even at a very high cycling rate of 2,000 mA g –1 . This strategy is further rationalized using ab initio calculations, and important opportunities for synthetic optimization demonstrated in this study are highlighted.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Overcoming component limitations in synthetic biology through transposon-mediated protein engineering

Protein fission and fusion can be used to create biomolecules with new structures and functions, including circularly permuted proteins that require post-translational modifications for activity, split protein AND gates that require multiple inputs for activity, and fused domains that function as chemical-dependent protein switches. In this work, we describe how transposon mutagenesis can be used for protein design to create libraries of permuted, split, or domain-inserted proteins. Furthermore, when coupled with a functional screen or selection, these approaches can rapidly diversify the topologies and functions of natural proteins and create useful protein components for synthetic biology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Development and validation of an enhanced filtered drag model for simulating gas-solid fluidization of Geldart A particles in all flow regimes

Coarse-grid two-fluid simulation of gas-solid fluidized bed reactors based on the kinetic theory of granular flow exhibits a significant dependence on drag models, especially for Geldart A particles. Many drag models are available in the literature, which have been reported to work for different systems. This work focused on the evaluation of an enhanced filtered drag model along with other different drag models derived from different methods for three-dimensional two-fluid model simulations of gas-solid fluidized beds of Geldart A particles covering a broad range of fluidization regimes, including bubbling fluidization, turbulent fluidization, fast fluidization, and dilute phase transport regimes. Eight drag models were selected, which included five heterogeneous drag models and three homogeneous drag models. Comparison with the available experimental data demonstrates the need for modification of homogeneous drag models to account for the effect of mesoscale structures (i.e., bubbles and clusters). The enhanced filtered drag model and energy-minimization multi-scale (EMMS) drag models were found to achieve superior predictions in all fluidization regimes, while the other drag models were only capable of predicting certain fluidization regimes. Finally, the results of this work provide a guideline for choosing appropriate drag models for simulating Geldart A particles and suggestions on developing more reliable and general drag models applicable in all flow regimes.

42 ENGINEERING↗
DOE OSTI2025

Improving adhesive bonding of short carbon fiber thermoplastic composites to aluminum alloys with a hybrid laser-plasma surface modification strategy

This study investigates hybrid laser–plasma surface modification strategies for metal–CFRTP (carbon-fiber-reinforced thermoplastic polymer) dissimilar joints to improve their bonding performance, in contrast to existing literature that mostly focuses on either plasma or laser treatment alone. By conducting double cantilever beam (DCB) tests on adhesively-bonded AA5052 and CFRPA66 (carbon-fiber-reinforced polyamide 66) joints, as an example of metal–CFRTP joints, it was found that laser engraving on the metal surface combined with plasma treatment on the CFRTP surface significantly improved the specific fracture energy of the joint by 187% and 31% compared to as-received and plasma-treated-only joints, respectively. However, the hybrid treatment of laser engraving and plasma on the investigated CFRTP surface did not improve the bonding performance of the joints. The underlying mechanisms related to hybrid laser-plasma surface modification strategies were further investigated by examining the surface and cross-sectional morphologies after DCB testing using microscopy. Computational modeling was performed to elucidate the interaction between grooves on the metal substrate and the CFRTP–adhesive interfacial bonding in metal–CFRTP joints. This study provides new insights into developing surface modification methods for achieving strong metal–CFRTP adhesive joints, aimed at lightweighting structural components in automotive, aerospace, and other applications.

Adhesive bonding↗
DOE OSTI2018

Molecular Basis for Autocatalytic Backbone N -Methylation in RiPP Natural Product Biosynthesis

N-methylation of nucleic acids, proteins, and peptides is a chemical modification with significant impact on biological regulation. Despite the simplicity of the structural change, N-methylation can influence diverse functions including epigenetics, protein complex formation, and microtubule stability. While there are limited examples of N-methylation of the α-amino group of bacterial and eukaryotic proteins, there are no examples of catalysts that carry out post-translation methylation of backbone amides in proteins or peptides. Recent studies have identified enzymes that catalyze backbone N-methylation on a peptide substrate, a reaction with little biochemical precedent, in a family of ribosomally synthesized natural products produced in basidiomycetes. Here, we describe the crystal structures of Dendrothele bispora dbOphMA, a methyltransferase that catalyzes multiple N-methylations on the peptide backbone. We further carry out biochemical studies of this catalyst to determine the molecular details that promote this unusual chemical transformation. As a result, the structural and biochemical framework described here could facilitate biotechnological applications of catalysts for the rapid production of backbone N-methylated peptides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Alternative splicing and allosteric regulation modulate the chromatin binding of UHRF1

UHRF1 is an important epigenetic regulator associated with apoptosis and tumour development. It is a multidomain protein that integrates readout of different histone modification states and DNA methylation with enzymatic histone ubiquitylation activity. Emerging evidence indicates that the chromatin-binding and enzymatic modules of UHRF1 do not act in isolation but interplay in a coordinated and regulated manner. Here, we compared two splicing variants (V1, V2) of murine UHRF1 (mUHRF1) with human UHRF1 (hUHRF1). We show that insertion of nine amino acids in a linker region connecting the different TTD and PHD histone modification-binding domains causes distinct H3K9me3-binding behaviour of mUHRF1 V1. Structural analysis suggests that in mUHRF1 V1, in contrast to V2 and hUHRF1, the linker is anchored in a surface groove of the TTD domain, resulting in creation of a coupled TTD-PHD module. This establishes multivalent, synergistic H3-tail binding causing distinct cellular localization and enhanced H3K9me3-nucleosome ubiquitylation activity. In contrast to hUHRF1, H3K9me3-binding of the murine proteins is not allosterically regulated by phosphatidylinositol 5-phosphate that interacts with a separate less-conserved polybasic linker region of the protein. Our results highlight the importance of flexible linkers in regulating multidomain chromatin binding proteins and point to divergent evolution of their regulation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Electrochemical Probing of Steric, Electrostatic and Hydrophobic Interactions of Large Cations in Polymers of Intrinsic Microporosity

Porous membranes have been used for many applications, including separations in biotechnology, the food industry, water purification, and even energy storage devices. The benefit of polymers of intrinsic microporosity (PIMs) is their consistently sized nanopore channels. Inherent functionalities of the PIM structure not only create these channels but are also available for further modifications that can change the interactions of ions and molecules inside of the pore. Here we design solid state nanopores on which are drop-casted two different PIMs, functionalized with either a cyano group or a carboxylic acid. Ionic transport through the membranes is investigated based on pore size and charge-charge interactions, as well as steric and hydrophobic interactions. Achieving specific ion selectivity with easily processable porous membranes opens new avenues for water purification strategies and energy storage.

25 ENERGY STORAGE↗
DOE OSTI2018

Modified Slow Tuner Design for Cavity 1 Inside LCLS II Cryomodules

Initial LCLS-II cryomodule testing at Fermilab showed microphonics on the furthest upstream cavity (number 1) at least factor 2 larger than on the rest of the cavities. Testing indicated that this was a difference in the mechanical support of cavity 1, not a local acoustic source. Further investigation pointed to the upstream beam-pipe of the cavity 1. The upstream cavity flange has a solid spool piece connection to the beamline gate valve unlike the other cavities, which all connect through bellows. The gate valve's weight is supported by sliding system (free in z-axis) connected to large diameter Helium gas return pipe. The tuner design was modified to transform interface between cavity#1 and gate valve. Arms of the tuner for cavity 1 were extended and became the support structure for gate valve, eliminating the connection to the helium return pipe. Modification of the tuner design and results in microphonics mitigations will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Fundamental Studies of Irradiation-Induced Modifications in Microstructural Evolution and Mechanical Properties of Advanced Alloys

This final technical report summarizes the research performed during October 2014 and December 2017, with a focus on investigating the radiation-induced microstructural and mechanical property modifications in optimized advanced alloys for sodium-cooled fast reactor (SFR) structural applications. To accomplish these objectives, the radiation responses of several different advanced alloys, including austenitic steel Alloy 709 (A709) and 316H, and ferritic/ martensitic Fe–9Cr steels T91 and G92, were investigated using a combination of microstructure characterizations and nanoindentation measurements. Different types of irradiation, including ex situ bulk ion irradiation and in situ transmission electron microscopy (TEM) ion irradiation, were employed in this study. Radiation-induced dislocations, precipitates, and voids were characterized by TEM. Scanning transmission electron microscopy with energy dispersive X-ray spectroscopy (STEM-EDS) and/or atom probe tomography (APT) were used to study radiation-induced segregation and precipitation. Nanoindentation was used for hardness measurements to study irradiation hardening. Austenitic A709 and 316H was bulk-irradiated by 3.5 MeV Fe ++ ions to up to 150 peak dpa at 400, 500, and 600°. Compared to neutron-irradiated stainless steel (SS) 316, the Frank loop density of ion-irradiated A709 shows similar dose dependence at 400°, but very different temperature dependence. Due to the noticeable difference in the initial microstructure of A709 and 316H, no systematic comparison on the Frank loops in A709 vs 316H was made. It would be helpful that future ion irradiation study on 316 stainless steel could be conducted to directly compare the temperature dependence of Frank loop density in ion-irradiated 316 SS with that in neutron-irradiated 316 SS. In addition, future neutron irradiation on A709 at 400–600° at relative high dose (≥10 dpa) can be carried out to compare with ion-irradiated A709. The radiation-induced segregation (RIS) of Ni and Si was observed in both A709 and 316H in all irradiated conditions and was found at various sinks: line dislocations, dislocation loops, void surfaces, carbide-matrix interfaces, etc. Radiation also induced the formation of Ni,Si-rich precipitates. As suggested in a previous study on neutron-irradiated 316 stainless steel, one possible consequence of the significant RIS of Si is that the enrichment at defect sinks depletes the silicon in the matrix, which can lead to enhanced void nucleation rate. The enrichment of Ni and Si is accompanied by the depletion of Cr at defect sinks, which could also affect the corrosion resistance. Radiation-induced change in the orientation relationship of pre-existing MX precipitates was observed at 600°. It is believed that this change is associated with the network dislocations formed under irradiation. The underlying mechanism is still not well understood. This change could be a positive indication that the MX precipitates can survive high density network dislocations. It would be helpful if neutron irradiation at similar dose conditions could be carried out to verify that this effect is not unique for ion irradiation. Intragranular Cr-rich carbides with a core-shell structure, i.e. Cr-rich carbide core and Ni,Si-rich shell was found at 500° and 600° in the highest dose (150 peak dpa) specimens. Coarse voids (30 nm in diameter) were only commonly found at 500° in the 50 and 150 peak dpa specimens in regions less than 750 nm in depth. The highest swelling for A709 irradiated to 50 and 150 peak dpa at 500° is about 0.44% and 0.37%, respectively. Due to the choice of 100 degree temperature intervals, this study did not attempt to precisely identify peak void swelling conditions, merely the range of irradiation temperatures where this could be a concern. It is known high-dose ion irradiation can significantly suppress void nucleation. Future neutron irradiation in the 500–600° range (without considering the temperature shift) is needed to determine the onset of accelerated void swelling (possibly at lower dose).

36 MATERIALS SCIENCE↗
DOE OSTI2019

Simultaneously Dual Modification of Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries

A critical challenge in the commercialization of layer-structured Ni-rich materials is the fast capacity drop and voltage fading due to the interfacial instability and bulk structural degradation of the cathodes during battery operation. Herein, with the guidance of theoretical calculations of migration energy difference between La and Ti from the surface to the inside of LiNi 0.8 Co 0.1 Mn 0.1 O 2 , for the first time, Ti-doped and La 4 NiLiO 8 -coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes are rationally designed and prepared, via a simple and convenient dual-modification strategy of synchronous synthesis and in situ modification. Impressively, the dual modified materials show remarkably improved electrochemical performance and largely suppressed voltage fading, even under exertive operational conditions at elevated temperature and under extended cutoff voltage. Further studies reveal that the nanoscale structural degradation on material surfaces and the appearance of intergranular cracks associated with the inconsistent evolution of structural degradation at the particle level can be effectively suppressed by the synergetic effect of the conductive La 4 NiLiO 8 coating layer and the strong Ti—O bond. The present work demonstrates that our strategy can simultaneously address the two issues with respect to interfacial instability and bulk structural degradation, and it represents a significant progress in the development of advanced cathode materials for high-performance lithium-ion batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A Structured Quasi-Newton Algorithm for Optimizing with Incomplete Hessian Information

We present a structured quasi-Newton algorithm for unconstrained optimization problems that have unavailable second-order derivatives or Hessian terms. We provide a formal derivation of the well-known Broyden--Fletcher--Goldfarb--Shanno (BFGS) secant update formula that approximates only the missing Hessian terms, and we propose a linesearch quasi-Newton algorithm based on a modification of Wolfe conditions that converges to first-order optimality conditions. We also analyze the local convergence properties of the structured BFGS algorithm and show that it achieves superlinear convergence under the standard assumptions used by quasi-Newton methods using secant updates. In conclusion, we provide a thorough study of the practical performance of the algorithm on the CUTEr suite of test problems and show that our structured BFGS-based quasi-Newton algorithm outperforms the unstructured counterpart(s).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Shining light on cysteine modification: connecting protein conformational dynamics to catalysis and regulation

We report that cysteine is a rare but functionally important amino acid that is often subject to covalent modification. Cysteine oxidation plays an important role in many human disease processes, and basal levels of cysteine oxidation are required for proper cellular function. Because reactive cysteine residues are typically ionized to the thiolate anion (Cys-S - ), their formation of a covalent bond alters the electrostatic and steric environment of the active site. X-ray-induced photo-oxidation to sulfenic acids (Cys-SOH) can recapitulate some aspects of the changes that occur under physiological conditions. Here we propose how site-specific cysteine photo-oxidation can be used to interrogate ensuing changes in protein structure and dynamics at atomic resolution. Although this powerful approach can connect cysteine covalent modification to global protein conformational changes and function, careful biochemical validation must accompany all such studies to exclude misleading artifacts. Lastly, new types of X-ray crystallography experiments and powerful computational methods are creating new opportunities to connect conformational dynamics to catalysis for the large class of systems that use covalently modified cysteine residues for catalysis or regulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Surface modification of Ti alloy by electro-explosive alloying and electron-beam treatment

By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT6 is carried out after electric explosion alloying with boron carbide and subsequent irradiation by pulsed electron beam. The formation of an electro-explosive alloying zone of a thickness up to 50 µm, having a gradient structure, characterized by decrease in the concentration of carbon and boron with increasing distance to the treatable surface has been revealed. Subsequent electron-beam treatment of alloying zone leads to smoothing of the alloying area surface and is accompanied by the multilayer structure formation at the depth of 30 µm with alternating layers with different alloying degrees having the structure of submicro - and nanoscale level.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Measurement of Physicochemical Properties of Lignin

Lignin is an essential cell wall component of lignocellulose. Unlike other major components such as cellulose and hemicellulose, lignin is a noncarbohydrate biopolymer and contributes to cell wall rigidity and hydrophobicity. Lignin’s unique properties contribute to the transportation of water and minerals in plants and protect against microbial attacks, while the latter property hinders the conversion of carbohydrates in lignocellulose. Also, its heterogeneity and structural complexity are major recalcitrance factors in biomass conversion. Various approaches (including genetically engineered plants, pulping, pretreatments, and fractionation processes) have been proposed to reduce and/or remove lignin for effective conversion of lignocellulose. Recently, interest in the biorefinery concept considers lignin as a potential feedstock in many applications; however, the technologies necessary to facilitate the economic production of many lignin-based products is still in its infancy. For the effective utilization of lignocellulose, understanding the physicochemical properties of lignin is the first and last step. It not only provides the key information about lignin structures in the original plant cell wall, conversion products, or residues, but also explains how the modification and/or conversion process affects lignin and biomass in general. Many different lignin characteristics, including physicochemical, morphological, and thermal properties, can be measured by diverse analytical techniques. This chapter introduces analytical methods that measure several essential physicochemical properties of lignin, such as molecular weights by gel permeation chromatography (GPC), quantitative and qualitative information of structural properties (interunit linkages and aromatic subunits) by one-dimensional and two-dimensional nuclear magnetic resonance (NMR), and hydroxyl group content by 31P NMR.

Yoo, Chang Geun↗