Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56

Surface reflectance retrieval from satellite and aircraft sensors - Results of sensors and algorithm comparisons during FIFE

Visible to shortwave infrared radiometric data collected by a number of remote sensing instruments on aircraft and satellite platforms were compared over common areas in the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) site on August 4, 1989, to assess their radiometric consistency and the adequacy of atmospheric correction algorithms. The instruments in the study included the Landsat 5 Thematic Mapper (TM), the SPOT 1 high-resolution visible (HRV) 1 sensor, the NS001 Thematic Mapper simulator, and the modular multispectral radiometers (MMRs). Atmospheric correction routines analyzed were an algorithm developed for FIFE, LOWTRAN 7, and 5S. A comparison between corresponding bands of the SPOT 1 HRV 1 and the Landsat 5 TM sensors indicated that the two instruments were radiometrically consistent to within about 5 percent. Retrieved surface reflectance factors using the FIFE algorithm over one site under clear atmospheric conditions indicated a capability to determine near-nadir surface reflectance factors to within about 0.01 at a reflectance of 0.06 in the visible (0.4-0.7 microns) and about 0.30 in the near infrared (0.7-1.2 microns) for all but the NS001 sensor. All three atmospheric correction procedures produced absolute reflectances to within 0.005 in the visible and near infrared. In the shortwave infrared (1.2-2.5 microns) region the three algorithms differed in the retrieved surface reflectances primarily owing to differences in predicted gaseous absorption. Although uncertainties in the measured surface reflectance in the shortwave infrared precluded definitive results, the 5S code appeared to predict gaseous transmission marginally more accurately than LOWTRAN 7.

Markham, B. L.↗

Unsteady transonic potential flow over a flexible fuselage

A flexible fuselage capability has been developed and implemented within version 1.2 of the CAP-TSD code. The capability required adding time dependent terms to the fuselage surface boundary conditions and the fuselage surface pressure coefficient. The new capability will allow modeling the effect of a flexible fuselage on the aeroelastic stability of complex configurations. To assess the flexible fuselage capability several steady and unsteady calculations have been performed for slender fuselages with circular cross-sections. Steady surface pressures are compared with experiment at transonic flight conditions. Unsteady cross-sectional lift is compared with other analytical results at a low subsonic speed and a transonic case has been computed. The comparisons demonstrate the accuracy of the flexible fuselage modifications.

Gibbons, Michael D.↗

Flow analysis for the nacelle of an advanced ducted propeller at high angle-of-attack and at cruise with boundary layer control

An axisymmetric panel code and a three dimensional Navier-Stokes code (used as an inviscid Euler code) were verified for low speed, high angle of attack flow conditions. A three dimensional Navier-Stokes code (used as an inviscid code), and an axisymmetric Navier-Stokes code (used as both viscous and inviscid code) were also assessed for high Mach number cruise conditions. The boundary layer calculations were made by using the results from the panel code or Euler calculation. The panel method can predict the internal surface pressure distributions very well if no shock exists. However, only Euler and Navier-Stokes calculations can provide a good prediction of the surface static pressure distribution including the pressure rise across the shock. Because of the high CPU time required for a three dimensional Navier-Stokes calculation, only the axisymmetric Navier-Stokes calculation was considered at cruise conditions. The use of suction and tangential blowing boundary layer control to eliminate the flow separation on the internal surface was demonstrated for low free stream Mach number and high angle of attack cases. The calculation also shows that transition from laminar flow to turbulent flow on the external cowl surface can be delayed by using suction boundary layer control at cruise flow conditions. The results were compared with experimental data where possible.

Hwang, D. P.↗

A record of all marker bands found in the upper rivet rows of 2 adjacent bays from a fuselage lap splice joint

A full scale fuselage test article was subjected to 60,000 load cycles (pressurizations) to study the effect of widespread fatigue damage in fuselage structures. Every 10,000 cycles coded marker block loading sequences were used to mark the fracture surfaces of the fatigue cracks propagating within the panel. The loading sequences consisted of series of underloads combined with a series of full pressurizations. The combination of loads and underloads marked the fracture surfaces with marker bands that could later be used to reconstruct the fatigue crack growth history of selected regions within the test article. Thirty rivet holes comprising the upper rivet rows from two adjacent bays (bays #3 and #4) from a fuselage lap splice joint were examined for the purpose of this study. Optical and scanning electron microscopy (SEM) were used to locate the marker bands.

Willard, Scott A.↗

Accounting for Laminar Run & Trip Drag in Supersonic Cruise Performance Testing

An improved laminar run and trip drag correction methodology for supersonic cruise performance testing was derived. This method required more careful analysis of the flow visualization images which revealed delayed transition particularly on the inboard upper surface, even for the largest trip disks. In addition, a new code was developed to estimate the laminar run correction. Once the data were corrected for laminar run, the correct approach to the analysis of the trip drag became evident. Although the data originally appeared confusing, the corrected data are consistent with previous results. Furthermore, the modified approach, which was described in this presentation, extends prior historical work by taking into account the delayed transition caused by the blunt leading edges.

Goodsell, Aga M.↗

Thermal Protection System Evaluation Using Arc-jet Flows: Flight Simulation or Research Tool?

The arc-jet has been used to evaluate thermal protection systems (TPS) and materials for the past forty years. Systems that have been studied in this environmerd include ablators, active, and passive TPS concepts designed for vehicles entering planetary and Earth atmospheres. The question of whether arc-jet flow can simulate a flight environment or is it a research tool that provides an aero-thermodynamic heating environment to obtain critical material properties will be addressed. Stagnation point tests in arc-jets are commonly used to obtain material properties such as mass loss rates, thermal chemical stability data, optical properties, and surface catalytic efficiency. These properties are required in computational fluid dynamic codes to accurately predict the performance of a TPS during flight. Special facilities have been developed at NASA Ames Research Center to approximate the flow environment over the mid-fuselage and body flap regions of proposed space-planes type vehicles. This paper compares flow environments generated in flight over a vehicle with those created over an arc-jet test articles in terms of scale, chemistry, and fluid dynamic properties. Flight experiments are essential in order to validate the material properties obtained from arc-jet tests and used to predict flight performance of any TPS being considered for use on a vehicle entering the Earth atmosphere at hypersonic speed.

Stewart, David A.↗

Image-Based Computational Fluid Dynamics in Blood Vessel Models: Toward Developing a Prognostic Tool to Assess Cardiovascular Function Changes in Prolonged Space Flights

One of NASA's objectives is to be able to perform a complete, pre-flight, evaluation of cardiovascular changes in astronauts scheduled for prolonged space missions. Computational fluid dynamics (CFD) has shown promise as a method for estimating cardiovascular function during reduced gravity conditions. For this purpose, MRI can provide geometrical information, to reconstruct vessel geometries, and measure all spatial velocity components, providing location specific boundary conditions. The objective of this study was to investigate the reliability of MRI-based model reconstruction and measured boundary conditions for CFD simulations. An aortic arch model and a carotid bifurcation model were scanned in a 1.5T Siemens MRI scanner. Axial MRI acquisitions provided images for geometry reconstruction (slice thickness 3 and 5 mm; pixel size 1x1 and 0.5x0.5 square millimeters). Velocity acquisitions provided measured inlet boundary conditions and localized three-directional steady-flow velocity data (0.7-3.0 L/min). The vessel walls were isolated using NIH provided software (ImageJ) and lofted to form the geometric surface. Constructed and idealized geometries were imported into a commercial CFD code for meshing and simulation. Contour and vector plots of the velocity showed identical features between the MRI velocity data, the MRI-based CFD data, and the idealized-geometry CFD data, with less than 10% differences in the local velocity values. CFD results on models reconstructed from different MRI resolution settings showed insignificant differences (less than 5%). This study illustrated, quantitatively, that reliable CFD simulations can be performed with MRI reconstructed models and gives evidence that a future, subject-specific, computational evaluation of the cardiovascular system alteration during space travel is feasible.

Chatzimavroudis, George P.↗

Bayesian Inference in the Modern Design of Experiments

This paper provides an elementary tutorial overview of Bayesian inference and its potential for application in aerospace experimentation in general and wind tunnel testing in particular. Bayes Theorem is reviewed and examples are provided to illustrate how it can be applied to objectively revise prior knowledge by incorporating insights subsequently obtained from additional observations, resulting in new (posterior) knowledge that combines information from both sources. A logical merger of Bayesian methods and certain aspects of Response Surface Modeling is explored. Specific applications to wind tunnel testing, computational code validation, and instrumentation calibration are discussed.

DeLoach, Richard↗

Development of the Orion Crew Module Static Aerodynamic Database: Hypersonic - Part 1

The Orion aerodynamic database provides force and moment coefficients given the velocity, attitude, configuration, etc. of the Crew Exploration Vehicle (CEV). The database is developed and maintained by the NASA CEV Aerosciences Project team from computational and experimental aerodynamic simulations. The database is used primarily by the Guidance, Navigation, and Control (GNC) team to design vehicle trajectories and assess flight performance. The initial hypersonic re-entry portion of the Crew Module (CM) database was developed in 2006. Updates incorporating additional data and improvements to the database formulation and uncertainty methodologies have been made since then. This paper details the process used to develop the CM database, including nominal values and uncertainties, for Mach numbers greater than 8 and angles of attack between 140deg and 180deg. The primary available data are more than 1000 viscous, reacting gas chemistry computational simulations using both the Laura and Dplr codes, over a range of Mach numbers from 2 to 37 and a range of angles of attack from 147deg to 172deg. Uncertainties were based on grid convergence, laminar-turbulent solution variations, combined altitude and code-to-code variations, and expected heatshield asymmetry. A radial basis function response surface tool, NEAR-RS, was used to fit the coefficient data smoothly in a velocity-angle-of-attack space. The resulting database is presented and includes some data comparisons and a discussion of the predicted variation of trim angle of attack and lift-to-drag ratio. The database provides a variation in trim angle of attack on the order of +/-2deg, and a range in lift-to-drag ratio of +/-0.035 for typical vehicle flight conditions.

Bibb, Karen L.↗

TPSAS-NF1676L-21180-DND

Ablative materials are used as the Thermal Protection System (TPS) for space vehicles that enter a planetary atmosphere. During the entry phase, the vehicle experiences high rates of aerodynamic heating. These ablative materials, acting as a heat shield, protect the vehicle from the harsh environment and ensure a safe entry. Ablative materials reduce the incoming heat flux through various phenomena such as near-surface oxidation, pyrolysis chemical reaction, vaporization, and other erosive processes, collectively known as ablation. Spallation is one such ablative process, in which solid particles are ejected from the material into the flow field. The many conditions leading to spallation, however, are not well understood and cannot be described accurately by simple phenomenological models. However, the spallation phenomenon might impact the aerodynamic heating rates of re-entry vehicles using ablative heat shields. For example, the solid particles ejected from the surface can modify the near surface chemical processes and flow field. To investigate spallation effects, a code was developed to compute the dynamics of spalled particles. The code uses a finite-rate chemistry model to study the chemical interactions of the particles with the flow field. The spallation code is dynamically coupled to a CFD solver that models the time accurate hypersonic flow field around an ablative sample. An experimental investigation was also performed at the NASA Langley HYMETS facility. HYMETS is a 400 kW arcjet that can simulate hypersonic flight and Earth or Martian entry conditions. Using high speed cameras, an IR camera, NIR and UV-VIS spectrometers, and other diagnostic instruments, test data on various graphite, LI-900, FiberForm, and PICA test samples were obtained, using target heat flux conditions of 100, 200, and 400 W/cm 2 . From the test campaign, measurements of particle velocity, acceleration and trajectory are obtained.

A Martin↗

From Wind Tunnels to Flight Vehicles: Visualization and quantitative measurements supporting NASA’s space program

NASA’s Space Launch System (SLS) and Orion Crew Module have been studied in wind tunnels using the planar laser-induced fluorescence (PLIF) technique for flow visualization and quantitative thermometry and in flight using high-resolution imagery and quantitative infrared surface heating measurements. This paper reviews both types of measurements. OCIS codes: (120.1740) Combustion diagnostics; (300.2530) Fluorescence, laser-induced; (110.3080) Infrared imaging.

Planar Laser-Induced Fluorescence (PLIF)↗

Application of Thermal Loads to a Numerical Model

A detailed aerothermal model requires the application of the heat flux profile over all exposed aerodynamic surfaces. These loads are created using both engineering methods (e.g., FORTRAN codes implementing correlations) and CFD simulations (e.g., solutions to Navier-Stokes equations). The goal is to define the spatial and temporal dependency of the heat flux upon the model.

cfd↗

REVIEW OF PROPOSED METHODOLOGY FOR A RISK- INFORMED RELAXATION TO ASME SECTION XI APPENDIX G

The current regulations, as set forth by the United States Nuclear Regulatory Commission (NRC), to insure that light-water nuclear reactor pressure vessels (RPVs) maintain their structural integrity when subjected to planned normal reactor startup (heat-up) and shut-down (cool-down) transients are specified in Appendix G to 10 CFR Part 50, which incorporates by reference Appendix G to Section XI of the American Society of Mechanical Engineers (ASME) Code. The technical basis for these regulations are now recognized by the technical community as being conservative and some plants are finding it increasingly difficult to comply with the current regulations. Consequently, the nuclear industry has developed, and submitted to the ASME Code for approval, an alternative risk-informed methodology that reduces the conservatism and is consistent with the methods previously used to develop a risk-informed revision to the regulations for accidental transients such as pressurized thermal shock (PTS). The objective of the alternative methodology is to provide a relaxation to the current regulations which will provide more operational flexibility, particularly for reactor pressure vessels with relatively high irradiation levels and radiation sensitive materials, while continuing to provide reasonable assurance of adequate protection to public health and safety. The NRC and its contractor at Oak Ridge National Laboratory (ORNL) have recently performed an independent review of the industry proposed methodology. The NRC / ORNL review consisted of performing probabilistic fracture mechanics (PFM) analyses for a matrix of cool-down and heat-up rates, permutated over various reactor geometries and characteristics, each at multiple levels of embrittlement, including 60 effective full power years (EFPY) and beyond, for various postulated flaw characterizations. The objective of this review is to quantify the risk of a reactor vessel experiencing non-ductile fracture, and possible subsequent failure, over a wide range of normal transient conditions, when the maximum allowable thermal-hydraulic boundary conditions, derived from both the current ASME code and the industry proposed methodology, are imposed on the inner surface of the reactor vessel. This paper discusses the results of the NRC/ORNL review of the industry proposal including the matrices of PFM analyses, results, insights, and conclusions derived from these analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of Preliminary VERA-CS Crud Induced Localized Corrosion Modeling Capability

The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing multiphysics core-simulator software for light water reactors (LWRs) known as VERA-CS in order to improve the state of the art in modeling and simulation of challenge problems that are limiting to the nuclear industry. One of these challenge problems includes fuel rod crud deposition, which can lead to crud-induced power shift (CIPS) and crud-induced localized corrosion (CILC). This paper documents work that was performed to develop a preliminary CILC-modeling capability in VERA-CS in support of the crud challenge problem. The CILC capabilities were developed by coupling VERA-CS to the CASL-developed Cicada code, which provides 1D and 3D clad conduction and oxide growth modeling tools, as well as coupling to the CASL-developed MAMBA code, which is used for modeling clad crud deposition. An approach called rod thermal-hydraulic reconstruction (ROTHCON) was developed and integrated into VERA-CS. This allows the modeler to capture spacer-grid turbulence and heat transfer effects in the CTF subchannel code so that the spatial resolution of crud and oxide rod surface growth could be better resolved. After implementing these capabilities, several assessments were performed to ensure that the capabilities function as expected, and a pin-resolved quarter-core simulation was run as a demonstration.

Salko Jr, Robert↗

Virtual prototyping of liquid metal blanket performance in fusion pilot plant

Liquid metal blanket is a dominant design option for the next step fusion devices responsible for harvesting energy from fusion reaction, and simultaneously producing fuel for the same reaction through tritium breeding. Liquid metal blankets introduce additional complexity to the design due to fluid motion, fluid structure interaction, and magnetohydrodynamic (MHD) effects arising from the motion of the conducting fluid through the magnetic field. They are also directly affected by the plasma heat flux and neutronic fluence. PPPL is currently developing a virtual prototyping system for numerical analysis of the liquid metal blankets for future fusion devices. The system has a customized 3D computational fluid dynamics (CFD) code in its core, allowing MHD flow and conjugate heat transfer analysis in blankets fluids and solids. The code was successfully used before for dual coolant blanket analysis [A. Khodak et al., Fusion Eng. and Des. 137 (2018)]. Recently the same code was modified to allow verified simulation of MHD flows at high Hartmann numbers of several thousand typical for blanket applications. CFD code receives volumetric heat source distribution from the neutronic analysis based on MCNP code. In addition, direct tritium breeding simulation will be performed allowing optimization of the blanket performance. 2D axisymmetric version of neutronics code will be used for rapid optimization, with 3D version employed for detailed analysis. The surface heat distribution on the plasma facing wall will be defined by the software HEAT allowing 3D modeling of the heat flux based on the magnetic field distribution including gyro-orbit effects. Results of thermal analysis are imported into structural analysis code also included in the system. Finally, direct import of CAD geometry will be used for analyzing all components and as a result design option can be efficiently optimized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of three-dimensional ducted and exhaust plume flowfields

Computational procedures are described for analyzing three-dimensional supersonic internal flows and multinozzle exhaust plume flowfields. The computer codes (BIGMAC and CHAR3D) embodying these procedures cater to a broad spectrum of geometric situations via the use of multiple reference plane grid networks in several coordinate systems. Shock capturing techniques are employed to trace the propagation and interaction of multiple shock surfaces. Gas properties consist of combustion products in chemical equilibrium. The computational accuracy of the codes is assessed via comparisons with the results of other codes and experimental data. Results are presented for the flows in two-dimensional ducts, corner flows, flow in a rectangular nozzle, and the plume flowfields for exhausts issuing out of single and multiple rectangular nozzles.

Dash, S. M.↗

Radio-frequency wave interactions with a plasma sheath in oblique-angle magnetic fields using a sheath impedance model

Here, the physics of interactions between waves in plasmas and sheaths for background magnetic fields which make oblique angles with the sheath surfaces is studied with the use of the self-consistent finite element code rfSOL incorporating the recently developed sheath impedance model. The calculation based on this model employs the generalized sheath boundary condition (sheath BC), which surpasses the previously used capacitive sheath BC in reliability by taking into account the contributions of the ion and electron currents in the sheath as well as the displacement current. A series of numerical simulations is carried out in two-dimensional slab geometry with a flat or curved sheath surface as part of the boundary. It is shown that the sheath–plasma wave appears when the equilibrium magnetic field line angle with respect to the sheath surface is small, the absolute value of the radio-frequency (RF) sheath voltage is large, and the plasma density is slightly higher than the lower hybrid resonance density (LHR density), all of which bring the sheath property closer to being capacitive. It is also shown that the sharp variation of the magnetic field line angle along the sheath surface can sensitively affect the maximum absolute value of the RF sheath voltage at a plasma density slightly lower than the LHR density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface grid generation for complex three-dimensional geometries

An outline is presented for the creation of surface grids from primitive geometry data such as obtained from CAD/CAM systems. The general procedure is applicable to any geometry including full aircraft with wing, nacelle, and empennage. When developed in an interactive graphics environment, a code based on this procedure is expected to substantially improve the turn around time for generating surface grids on complex geometries. Results are shown for a general hypersonic airplane geometry.

Luh, Raymond Ching-Chung↗